CD series CMOS IC Time Delay Relay 1% Repeatability Operates from -40C to +55C Delay on operate or delay on release timing modes Fixed, knob or resistor adjustable types - Calibrated dial on knob adjustable types * 10A output relay with SPDT or DPDT contacts * Various models time from 0.1 to 180 sec. * * * * File E22575 File LR15734 Timing Modes Initial Dielectric Strength Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. ON OFF N.O. RELAY CONTACTS ON OFF INPUT VOLTAGE TIME Input Data @ 25C Delay on release - Input voltage must be applied continuously to operate the internal relay. When control Input is applied, the relay energizes. When control input is removed, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by reapplying control input. ON OFF N.O. RELAY ON CONTACTS OFF CONTROL INPUT TIME Voltage: 24 & 120VAC and 12 through 110VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25C Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC 24 120 12 24 48 110 20 105 11 20 41 95 28 130 13 32 55 125 DC Timing Specifications Timing Ranges: From 0.1 to 180 sec. Timing Adjustment: Fixed, external resistor and knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types: 5% of max. specified at high end of timing range; min. specified, or less, at low end; 10% full scale. Fixed Types: 5%. Res. Adj. Types: 5% at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 5%. Repeatability (for AC units add 1 cycle 60 Hz.): 1%. Release Time: 45 ms, typ.; 60 ms, max. Recycle Time: 45 ms, typ.; 60 ms, max. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Environmental Data Temperature Range: Storage: -55C to +85C. Operating: -40C to +55C. Mechanical Data Termination: 8- or 11-pin octal style plug. Enclosure: Yellow plastic case. Knob adjustable types have dial scale calibrated in seconds 5%. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 8 oz. (227g) approximately. Ordering Information - Boldface items listed below are normally maintained in stock for immediate delivery. Delay on Operate Models Voltage 120VAC Time Delay on Release Models Adjustment 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 0.3 to 30 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Wiring Dia. Knob Part Number 1 Voltage CDB-38-70001 CDB-38-70002 CDB-38-70003 CDB-38-70006 CDB-38-70004 CDB-38-70005 120VAC Time Adjustment 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 0.3 to 30 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Knob Wiring Dia. 3 Part Number CDB-38-70016 CDB-38-70091 CDB-38-70014 CDB-38-70092 CDB-38-70012 CDB-38-70015 120VAC 1 Sec. Fixed CDA-38-70012 120VAC 1 Sec. Fixed 3 CDA-38-70025 180 Sec. Fixed 3 CDC-38-20026 Resistor CDF-38-70001 CDF-38-70002 CDF-38-70003 12VDC 120VAC 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 24VDC Knob 3 Knob 1 CDD-38-30003 CDD-38-30004 CDD-38-30005 CDD-38-30014 CDD-38-30012 CDD-38-30008 24VDC 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 48VDC 0.6 to 60 Sec. Knob 1 CDD-38-40002 Knob 1 110VDC 0.1 to 1 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 2 CDD-38-60004 CDD-38-60001 CDD-38-60002 CDD-38-60003 Outline Dimensions 2.406 MAX. (61.1) 2.937 MAX. (74.6) .56 (14.2) .60 (15.2) 1.781 MAX. (45.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) CONTROL INPUT* _ EXTERNAL RESISTOR + _ INPUT (DC POLARITY INDICATED)** _ INPUT (DC POLARITY INDICATED)** _ SUPPLY INPUT (DC POLARITY INDICATED)** Fig. 1 8 Pin Fig. 2 11 Pin Fig. 3 11 Pin + + + * If control input is applied when supply input is applied, relay will immediately energize. A 50 millisecond minimum control pulse is required. ** Note Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". External Resistor Selection Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Tyco Electronics Corporation - P&B, Winston-Salem, NC 27102 Technical Support Center: 1-800-522-6752, www.pandbrelays.com Specifications and availability subject to change without notice. 13C2300 Printed in U.S.A. IH/4-00