10.16mm (0.4INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA04-11SRWA Super Bright Red Features Description z 0.4 inch digit height. The Super Bright Red source color devices are made with z Low current operation. Gallium Aluminum Arsenide Red Light Emitting Diode. z Excellent character appearance. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB4362 REV NO: V.12 DATE: MAR/29/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000065 Selection Guide Part No. Dice SA04-11SRWA Lens Type Super Bright Red (GaAlAs) White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 14000 30000 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAB4362 REV NO: V.12 DATE: MAR/29/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000065 Super Bright Red SA04-11SRWA SPEC NO: DSAB4362 REV NO: V.12 DATE: MAR/29/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000065 PACKING & LABEL SPECIFICATIONS SA04-11SRWA SPEC NO: DSAB4362 REV NO: V.12 DATE: MAR/29/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000065 SPEC NO: DSAB4362 REV NO: V.12 DATE: MAR/29/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000065 SPEC NO: DSAB4362 REV NO: V.12 DATE: MAR/29/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000065