RT9169-12GVL - Richtek Technology

RT9169/H

DS9169/H-14 April 2011 www.richtek.com

Pin Configurations

100mA, 4μμ

μμ

μA Quiescent Current CMOS LDO Regulator

Marking Information

For marking information, contact our sales representative

directly or through a Richtek distributor located in your

area.

Ordering Information

General Description

The RT9169/H series are 100mA ultra-low quiescent

current CMOS low dropout (LDO) regulator designed for

battery-powered equipments. The output voltages range

from 1.2V to 5V with 0.1V per step.

The other features include 4μA ultra-low quiescent, low

dropout voltage, high output accuracy, current limiting

protection, and high ripple rejection ratio.

Features

zUltra-Low Quiescent Current: 4μμ

μμ

μA

zLow Dropout: 450mV at 100mA

zWide Operating Voltage Ranges: 2V to 6V

zCurrent Limiting Protection

zOnly 1μμ

μμ

μF Output Capacitor Required for Stability

zHigh Power Supply Rejection Ratio

zRoHS Compliant and 100% Lead (Pb)-Free

Applications

zBattery-Powered Equipment

zPalmtops, Notebook Computers

zHa nd-held Instruments

zPCMCIA Cards

TO-92 (L-T ype)

TO-92 (T -T ype)

SOT-23-3

(TOP VIEW)

SOT-23-3 (L-T ype)

Note :

1. RT9169H package type is available in SOT-23-5 only.

2. Richtek products are :

` RoHS compliant and compatible with the current require-

ments of IPC/JEDEC J-STD-020.

` Suitable for use in SnPb or Pb-free soldering processes.

GND VOUT

VIN

VOUT GND

VIN

GND

VOUT

VIN

GND

SOT-23-5

VIN GND

VOUT NC

EN/EN

SOT-89

GND VIN

(TAB) VOUT

123

Package Type

ZL : TO-92 (L-T ype)

ZT : TO-92 (T-Type)

X : SOT-89

V : SOT-23-3

VL : SO T-23-3 (L-Type)

B : SOT-23-5

Output Voltage

12 : 1.2V

13 : 1.3V

49 : 4.9V

50 : 5.0V

RT9169/H-

Chip Enable High (SOT-23-5 Only)

Chip Enable Low

Lead Plating System

P : Pb Free

G : Green (Halogen Free and Pb Free)

RT9169/H

2DS9169/H-14 April 2011www.richtek.com

Absolute Maximum Ratings (Note 1)

zInput V oltage ---------------------------------------------------------------------------------------------------------- 7V

zPower Dissipation, PD @ TA = 25°C

SOT-23-3--------------------------------------------------------------------------------------------------------------- 0.4W

SOT-23-5--------------------------------------------------------------------------------------------------------------- 0.4W

SOT-89 ----------------------------------------------------------------------------------------------------------------- 0.571W

TO-92 ------------------------------------------------------------------------------------------------------------------- 0.625W

zJunction T emperature ----------------------------------------------------------------------------------------------- 150°C

zLead T emperature (Soldering, 10 sec.) ------------------------------------------------------------------------- 260°C

zStorage T emperature Range --------------------------------------------------------------------------------------- −65°C to 150°C

zPa ckage Thermal Resista nce (Note 2)

SOT-23-3, θJA --------------------------------------------------------------------------------------------------------- 250°C/W

SOT-23-5, θJA --------------------------------------------------------------------------------------------------------- 250°C/W

SOT-89, θJA ----------------------------------------------------------------------------------------------------------- 175°C/W

TO-92, θJA ------------------------------------------------------------------------------------------------------------- 160°C/W

zESD Susceptibility (Note 3)

HBM (Human Body Mode) ----------------------------------------------------------------------------------------- 2kV

MM (Ma chine Mode) ------------------------------------------------------------------------------------------------ 200V

Function Block Diagram

Typical Application Circuit

VIN GND

VOUT

RT9169

COUT

1uF

CIN

1uF

VIN VOUT

VIN

GND

VOUT

RT9169/H

COUT

1uF

CIN

1uF

VIN VOUT

EN/EN

RT9169H

Chip Enable

RT9169

Chip Enable

-Current

Limit

VIN

VOUT

EN/EN

Recommended Operating Conditions (Note 4)

zJunction T emperature Range -------------------------------------------------------------------------------------- −40°C to 125°C

zAmbient T emperature Range -------------------------------------------------------------------------------------- −40°C to 85°C

Functional Pin Description

Pin Name Pin Function

VIN Power Input

VOUT Output Voltage

GND Ground

EN/EN Chip Enable Control Input

RT9169/H

DS9169/H-14 April 2011 www.richtek.com

Electrical Characteristics

(VIN = 5.5V, CIN = 1μF, COUT = 1μF, TA = 25°C, unless otherwise specified)

Parameter Symbol Test Conditions Min Typ Max Unit

Inpu t Volta ge Range V IN 2 -- 6 V

Output Voltage Accuracy ΔVOUT I

L = 1mA -2 -- +2 %

Maximum Output Current IMAX V

IN = VOUT + 0.6V, VIN ≥ 3.6V 100 -- -- mA

Current Limit ILIM I

L = 100mA 150 250 -- mA

No Load -- 4 7 μA

GND Pin Cu rrent IG IOUT = 100mA 4 10 μA

IOUT = 1 mA, VIN ≥ 3.6V -- 4 10

IOUT = 50 mA, VIN ≥ 3.6V -- 200 300 Dropout Voltage VDROP

IOUT = 100mA, VIN ≥ 3.6V -- 450 600

Line Regulation ΔVLINE VIN = (VOUT + 0.3V) to 6V,

VIN ≥ 3.6V , IOUT = 1mA -0.2 -- +0.2 %/V

Load Re gulation ΔVLOAD I

LOUT = 0mA to 100mA -- 0.01 0.04 %/mA

Output Noise eNO BW = 10 0 Hz to 50 kHz

COUT = 10μF -- 250 -- μV

Ripple Re jec tion PSRR F = 1kHz, COUT = 1μF -- 30 -- dB

S tandby

Current RT 9 169/H (SOT-23-5) EN = V IN or E N = 0 -- 0.1 1 μA

Logic High VIL 0.6 -- --

EN/EN

Threshold Logic Low VIH -- -- 2 V

Thermal Shutdown Protection 125 -- -- °C

Application Information

A 1μF (or larger) capacitor is recommended between VOUT and GND for stability. The part may oscillate without the

ca pacitor. Any type of ca pacitor can be used, but not Aluminum electrolytes when operating below –25°C. The ca pacitance

may be increased without li mit.

A 1μF ca pacitor (or larger) should be pla ced between VIN to GND.

Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for

stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the

operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended

periods may remain possibility to affect device reliability.

Note 2. θJA is measured in the natural convection at TA = 25°C on a low effective thermal conductivity test board of

JEDEC 51-3 thermal measurement standard.

Note 3. Devices are ESD sensitive. Handling precaution is highly recommended.

Note 4. The device is not guaranteed to function outside its operating conditions.

RT9169/H

4DS9169/H-14 April 2011www.richtek.com

Typical Operating Characteristics

Quiescient Current vs. Temperature

-30 0 30 60 90 120

Temperature

Quiescent C urr ent ( A

)

VIN = 5V

(°C)

Dropout Voltage (VIN-VOUT)

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

020406080100

ILOAD (mA)

Dropout Vo lt ag e (V)

VOUT = 3.3V

125°C

25°C

Short Circuit Current

100

200

300

400

500

012345

Input/Output Differential (V)

Short C ir c uit Cu rrent ( m A

)

125°C

25°C

Temperature Stability

1.7

2.1

2.5

2.9

3.3

3.7

-50 -25 0 25 50 75 100 125

Temperature

Output V olt a ge (V)

VOUT = 3.3V

VOUT = 1.8V

(°C)

PSRR

-70

-60

-50

-40

-30

-20

-10

Frequency (H z)

PSRR (dB)

10 100 1k 10k 100k 1M

VIN = 5V, VOUT = 3.3V

CIN = 1uF , TA = 125°C

COUT = 1uF Electrolytic

Capacitor

10mA

50mA

PSRR

-70

-60

-50

-40

-30

-20

-10

Frequency (H z)

PSRR (dB)

10 100 1k 10k 100k 1M

VIN = 5V, VOUT = 1.8V

CIN = 1uF , TA = 125°C

COUT = 1uF Electrolytic

Capacitor

10mA

50mA

RT9169/H

DS9169/H-14 April 2011 www.richtek.com

Line Transient Response

Input Voltage

Deviation (V) Output Voltage

Deviation (mV)

300

200

100

Time (1ms/Div)

VOUT = 1.8V

IOUT = 50mA TA = 25°C

COUT = 1uF Electrolytic

≈ ≈

Line Transient Response

Input Voltage

Deviation (V) Output Voltage

Deviation (mV)

3Time (1ms/Div)

VOUT = 3.3V

IOUT = 50mA TA = 25°C

COUT = 1uF Electrolytic

200

100

≈ ≈

Load Transient Response

Load

Current (mA) Output Voltage

Deviation (mV)

100

−50

100

−50

Time (500us/Div)

VIN = 5V

VOUT = 3.3V

TA = 25°C

CIN = 1uF Cera mic

COUT = 1uF Cera mic

≈

Load Transient Response

Load

Current (mA) Output Voltage

Deviation (mV)

200

100

−100

100

−50

Time (500us/Div)

VIN = 5V

VOUT = 3.3V

TA = 25°C

CIN = 1uF Cera mic

COUT = 1uF Cera mic

≈ ≈

Load Transient Response

Load

Current (mA) Output Voltage

Deviation (mV)

100

−50

−20

Time (500us/Div)

VIN = 5V

VOUT = 1.8V

TA = 25°C

CIN = 1uF Cera mic

COUT = 1uF Cera mic

≈

Load Transient Response

Load

Current (mA) Output Voltage

Deviation (mV)

200

100

−100

−50

Time (500us/Div)

VIN = 5V

VOUT = 1.8V

TA = 25°C

CIN = 1uF Cera mic

COUT = 1uF Cera mic

≈

RT9169/H

6DS9169/H-14 April 2011www.richtek.com

bA1

SOT-23-3 Surface Mount Pa ckage

Dim e nsions In Millimet e rs Dime nsio ns In Inc hes

Symbol Min Max Min Max

A 0.889 1.295 0.035 0.051

A1 0.000 0.152 0.000 0.006

B 1.397 1.803 0.055 0.071

b 0.356 0.508 0.014 0.020

C 2.591 2.997 0.102 0.118

D 2.692 3.099 0.106 0.122

e 1.803 2.007 0.071 0.079

H 0.080 0.254 0.003 0.010

L 0.300 0.610 0.012 0.024

Outline Dimension

RT9169/H

DS9169/H-14 April 2011 www.richtek.com

AA1

SOT-23-5 Surface Mount Package

Dimensions In Millimet ers Dim ension s In Inches

Symbol Min Max Min Max

A 0.889 1.295 0.035 0.051

A1 0.000 0.152 0.000 0.006

B 1.397 1.803 0.055 0.071

b 0.356 0.559 0.014 0.022

C 2.591 2.997 0.102 0.118

D 2.692 3.099 0.106 0.122

e 0.838 1.041 0.033 0.041

H 0.080 0.254 0.003 0.010

L 0.300 0.610 0.012 0.024

RT9169/H

8DS9169/H-14 April 2011www.richtek.com

3-Lead SOT-89 Surface Mount Package

Dim e nsions In Millimet e rs Dimensio ns In Inche s

Symbol Min Max Min Max

A 1.397 1.600 0.055 0.063

b 0.356 0.483 0.014 0.019

B 2.388 2.591 0.094 0.102

b1 0.406 0.533 0.016 0.021

C 3.937 4.242 0.155 0.167

C1 0.787 1.194 0.031 0.047

D 4.394 4.597 0.173 0.181

D1 1.397 1.753 0.055 0.069

e 1.448 1.549 0.057 0.061

H 0.356 0.432 0.014 0.017

RT9169/H

DS9169/H-14 April 2011 www.richtek.com

Information that is provided by Richtek Technology Corporation is believed to be accurate and reliable. Richtek reserves the right to make any change in circuit

design, specification or other related things if necessary without notice at any time. No third party intellectual property infringement of the applications should be

guaranteed by users when integrating Richtek products into any application. No legal responsibility for any said applications is assumed by Richtek.

Richtek Technology Corporation

Headquarter

5F, No. 20, Taiyuen Street, Chupei City

Hsinchu, Taiwan, R.O.C.

Tel: (8863)5526789 Fax: (8863)5526611

Richtek Technology Corporation

Taipei Office (Marketing)

5F, No. 95, Minchiuan Road, Hsintien City

Taipei County, Taiwan, R.O.C.

Tel: (8862)86672399 Fax: (8862)86672377

Email: marketing@richtek.com

D1 A1

3-Lead TO-92 Plastic Package

Dim e nsions In Millimet e rs Dime nsio ns In Inc hes

Symbol Min Max Min Max

A 3.175 4.191

0.125 0.165

A1 1.143 1.372 0.045 0.054

b 0.406 0.533

0.016 0.021

C 0.406 0.533

0.016 0.021

D 4.445 5.207 0.175 0.205

D1 3.429 5.029

0.135 0.198

E 4.318 5.334

0.170 0.210

e 1.143 1.397

0.045 0.055

L 12.700 0.500