RT9169/H A Quiescent Current CMOS LDO Regulator 100mA, 4 General Description Features The RT9169/H series are 100mA ultra-low quiescent current CMOS low dropout (LDO) regulator designed for battery-powered equipments. The output voltages range from 1.2V to 5V with 0.1V per step. z The other features include 4A ultra-low quiescent, low dropout voltage, high output accuracy, current limiting protection, and high ripple rejection ratio. Ordering Information RT9169/H- z z z z z z Low Dropout: 450mV at 100mA Wide Operating Voltage Ranges: 2V to 6V Current Limiting Protection Only 1 F Output Capacitor Required for Stability High Power Supply Rejection Ratio RoHS Compliant and 100% Lead (Pb)-Free Applications z Package Type ZL : TO-92 (L-Type) ZT : TO-92 (T-Type) X : SOT-89 V : SOT-23-3 VL : SOT-23-3 (L-Type) B : SOT-23-5 A Ultra-Low Quiescent Current: 4 z z z Battery-Powered Equipment Palmtops, Notebook Computers Hand-held Instruments PCMCIA Cards Pin Configurations (TOP VIEW) Lead Plating System P : Pb Free G : Green (Halogen Free and Pb Free) Output Voltage 12 : 1.2V 13 : 1.3V : 49 : 4.9V 50 : 5.0V Chip Enable High (SOT-23-5 Only) VIN VIN 3 3 2 VOUT 2 GND GND SOT-23-3 SOT-23-3 (L-Type) Chip Enable Low Note : 1 2 VOUT 3 VOUT NC 5 4 2 3 1. RT9169H package type is available in SOT-23-5 only. VIN GND EN/EN 2. Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. GND VIN VOUT (TAB) SOT-23-5 SOT-89 Suitable for use in SnPb or Pb-free soldering processes. Marking Information For marking information, contact our sales representative directly or through a Richtek distributor located in your area. 3 VOUT 2 GND 1 VIN TO-92 (L-Type) 3 GND 2 VIN 1 VOUT TO-92 (T-Type) DS9169/H-14 April 2011 www.richtek.com 1 RT9169/H Typical Application Circuit VIN CIN 1uF VOUT COUT 1uF GND VIN VOUT RT9169/H GND EN/EN + CIN 1uF VOUT + + VIN + RT9169 VIN VOUT COUT 1uF RT9169 RT9169H Chip Enable Chip Enable Function Block Diagram Functional Pin Description VIN + - Current Limit EN/EN Absolute Maximum Ratings z z z z z z z VOUT z Pin Function VIN Power Input VOUT Output Voltage GND Ground EN/EN Chip Enable Control Input (Note 1) Input Voltage ---------------------------------------------------------------------------------------------------------- 7V Power Dissipation, PD @ TA = 25C SOT-23-3 --------------------------------------------------------------------------------------------------------------- 0.4W SOT-23-5 --------------------------------------------------------------------------------------------------------------- 0.4W SOT-89 ----------------------------------------------------------------------------------------------------------------- 0.571W TO-92 ------------------------------------------------------------------------------------------------------------------- 0.625W Junction Temperature ----------------------------------------------------------------------------------------------- 150C Lead Temperature (Soldering, 10 sec.) ------------------------------------------------------------------------- 260C Storage Temperature Range --------------------------------------------------------------------------------------- -65C to 150C Package Thermal Resistance (Note 2) SOT-23-3, JA --------------------------------------------------------------------------------------------------------- 250C/W SOT-23-5, JA --------------------------------------------------------------------------------------------------------- 250C/W SOT-89, JA ----------------------------------------------------------------------------------------------------------- 175C/W TO-92, JA ------------------------------------------------------------------------------------------------------------- 160C/W ESD Susceptibility (Note 3) HBM (Human Body Mode) ----------------------------------------------------------------------------------------- 2kV MM (Machine Mode) ------------------------------------------------------------------------------------------------ 200V Recommended Operating Conditions z Pin Name (Note 4) Junction Temperature Range -------------------------------------------------------------------------------------- -40C to 125C Ambient Temperature Range -------------------------------------------------------------------------------------- -40C to 85C www.richtek.com 2 DS9169/H-14 April 2011 RT9169/H Electrical Characteristics (VIN = 5.5V, CIN = 1F, COUT = 1F, TA = 25C, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit 2 -- 6 V -2 -- +2 % Input Voltage Range VIN Output Voltage Accuracy V OUT IL = 1mA Maximum Output Current IMAX VIN = V OUT + 0.6V, V IN 3.6V 100 -- -- mA Current Limit ILIM IL = 100mA 150 250 -- mA GND Pin Current IG -- 4 7 A 4 10 A Dropout Voltage No Load IOUT = 100mA IOUT = 1mA, VIN 3.6V -- 4 10 IOUT = 50mA, VIN 3.6V -- 200 300 IOUT = 100mA, VIN 3.6V -- 450 600 -0.2 -- +0.2 %/V -- 0.01 0.04 %/mA -- 250 -- V F = 1kHz, COUT = 1F -- 30 -- dB EN = V IN or EN = 0 -- 0.1 1 A VIL 0.6 -- -- VIH -- -- 2 125 -- -- VDROP VIN = (VOUT + 0.3V) to 6V, Line Regulation V LINE Load Regulation V LOAD ILOUT = 0mA to 100mA Output Noise eNO Ripple Rejection PSRR Standby Current EN/EN RT9169/H (SOT-23-5) Logic High Threshold Logic Low VIN 3.6V, IOUT = 1mA BW = 100Hz to 50kHz COUT = 10F Thermal Shutdown Protection mV V C Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability. Note 2. JA is measured in the natural convection at TA = 25C on a low effective thermal conductivity test board of JEDEC 51-3 thermal measurement standard. Note 3. Devices are ESD sensitive. Handling precaution is highly recommended. Note 4. The device is not guaranteed to function outside its operating conditions. Application Information A 1F (or larger) capacitor is recommended between VOUT and GND for stability. The part may oscillate without the capacitor. Any type of capacitor can be used, but not Aluminum electrolytes when operating below -25C. The capacitance may be increased without limit. A 1F capacitor (or larger) should be placed between VIN to GND. DS9169/H-14 April 2011 www.richtek.com 3 RT9169/H Typical Operating Characteristics Temperature Stability Quiescient Current vs. Temperature 5 3.7 Quiescent Current ( A) Output Voltage (V) VOUT = 3.3V 3.3 2.9 2.5 2.1 4 3 2 1 VOUT = 1.8V VIN = 5V 0 1.7 -50 -25 0 25 50 75 100 -30 125 0 30 Dropout Voltage (VIN-VOUT) 90 120 4 5 Short Circuit Current 0.8 500 Short Circuit Current (mA) 125C 0.7 Dropout Voltage (V) 60 Temperature (C) Temperature (C) 0.6 0.5 25C 0.4 0.3 0.2 400 25C 300 125C 200 100 0.1 VOUT = 3.3V 0 0 0 20 40 60 80 100 0 1 2 3 Input/Output Differential (V) I LOAD (mA) PSRR PSRR 0 0 -10 -10 50mA -30 -40 VIN = 5V, VOUT = 1.8V CIN = 1uF, TA = 125C COUT = 1uF Electrolytic Capacitor -50 -60 50mA -20 10mA PSRR (dB) PSRR (dB) -20 -70 10mA -30 -40 VIN = 5V, VOUT = 3.3V CIN = 1uF, TA = 125C COUT = 1uF Electrolytic Capacitor -50 -60 -70 10 100 1k 10k Frequency (Hz) www.richtek.com 4 100k 1M 10 100 1k 10k 100k 1M Frequency (Hz) DS9169/H-14 April 2011 RT9169/H Line Transient Response TA = 25C COUT = 1uF Electrolytic 100 0 Input Voltage Deviation (V) 6 5 4 Output Voltage Deviation (mV) VOUT = 1.8V IOUT = 50mA 200 200 VOUT = 3.3V 100 IOUT = 50mA 0 6 5 4 3 3 Time (1ms/Div) Time (1ms/Div) CIN = 1uF Ceramic COUT = 1uF Ceramic 0 -20 Output Voltage Deviation (mV) VIN = 5V 20 VOUT = 1.8V TA = 25C Load Transient Response Load Current (mA) Load Current (mA) Output Voltage Deviation (mV) Load Transient Response 100 50 1 -50 VIN = 5V 50 VOUT = 1.8V TA = 25C -50 200 100 10 -100 Time (500us/Div) Load Transient Response CIN = 1uF Ceramic COUT = 1uF Ceramic 0 -50 100 50 1 -50 DS9169/H-14 April 2011 Output Voltage Deviation (mV) VIN = 5V 50 VOUT = 3.3V TA = 25C Time (500us/Div) Load Transient Response 100 Load Current (mA) Output Voltage Deviation (mV) 100 CIN = 1uF Ceramic COUT = 1uF Ceramic 0 Time (500us/Div) Load Current (mA) TA = 25C COUT = 1uF Electrolytic Input Voltage Deviation (V) Output Voltage Deviation (mV) Line Transient Response 300 VIN = 5V 50 VOUT = 3.3V TA = 25C CIN = 1uF Ceramic COUT = 1uF Ceramic 0 -50 200 100 10 -100 Time (500us/Div) www.richtek.com 5 RT9169/H Outline Dimension H D L C B e A A1 b Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 0.889 1.295 0.035 0.051 A1 0.000 0.152 0.000 0.006 B 1.397 1.803 0.055 0.071 b 0.356 0.508 0.014 0.020 C 2.591 2.997 0.102 0.118 D 2.692 3.099 0.106 0.122 e 1.803 2.007 0.071 0.079 H 0.080 0.254 0.003 0.010 L 0.300 0.610 0.012 0.024 SOT-23-3 Surface Mount Package www.richtek.com 6 DS9169/H-14 April 2011 RT9169/H H D L B C b A A1 e Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 0.889 1.295 0.035 0.051 A1 0.000 0.152 0.000 0.006 B 1.397 1.803 0.055 0.071 b 0.356 0.559 0.014 0.022 C 2.591 2.997 0.102 0.118 D 2.692 3.099 0.106 0.122 e 0.838 1.041 0.033 0.041 H 0.080 0.254 0.003 0.010 L 0.300 0.610 0.012 0.024 SOT-23-5 Surface Mount Package DS9169/H-14 April 2011 www.richtek.com 7 RT9169/H D D1 A B C C1 e e H A b b1 b Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 1.397 1.600 0.055 0.063 b 0.356 0.483 0.014 0.019 B 2.388 2.591 0.094 0.102 b1 0.406 0.533 0.016 0.021 C 3.937 4.242 0.155 0.167 C1 0.787 1.194 0.031 0.047 D 4.394 4.597 0.173 0.181 D1 1.397 1.753 0.055 0.069 e 1.448 1.549 0.057 0.061 H 0.356 0.432 0.014 0.017 3-Lead SOT-89 Surface Mount Package www.richtek.com 8 DS9169/H-14 April 2011 RT9169/H A D E L b e C D1 A1 Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 3.175 4.191 0.125 0.165 A1 1.143 1.372 0.045 0.054 b 0.406 0.533 0.016 0.021 C 0.406 0.533 0.016 0.021 D 4.445 5.207 0.175 0.205 D1 3.429 5.029 0.135 0.198 E 4.318 5.334 0.170 0.210 e 1.143 1.397 0.045 0.055 12.700 L 0.500 3-Lead TO-92 Plastic Package Richtek Technology Corporation Richtek Technology Corporation Headquarter Taipei Office (Marketing) 5F, No. 20, Taiyuen Street, Chupei City 5F, No. 95, Minchiuan Road, Hsintien City Hsinchu, Taiwan, R.O.C. Taipei County, Taiwan, R.O.C. Tel: (8863)5526789 Fax: (8863)5526611 Tel: (8862)86672399 Fax: (8862)86672377 Email: marketing@richtek.com Information that is provided by Richtek Technology Corporation is believed to be accurate and reliable. Richtek reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. No third party intellectual property infringement of the applications should be guaranteed by users when integrating Richtek products into any application. No legal responsibility for any said applications is assumed by Richtek. DS9169/H-14 April 2011 www.richtek.com 9