IM www.vishay.com Vishay Dale Inductors, Commercial, Molded, Axial Leaded FEATURES * Wide inductance range in small package * Flame retardant coating * Precision performance, excellent reliability, sturdy construction * Epoxy molded construction provides superior moisture protection * Compliant to RoHS Directive 2011/65/EU ELECTRICAL SPECIFICATIONS Inductance Tolerance: 1 %, 3 %, 5 %, 10 %, 20 %, oter tolerances available on request Insulation Resistance: 1000 M minimum per MIL-STD-202, method 302, test condition B Dielectric Strength: Per MIL-STD-202, method 301: 1000 VAC for IM-2, IM-4, IM-6, IM-8, IM-9 and IM-10 200 VAC for IM-1 TEST EQUIPMENT MECHANICAL SPECIFICATIONS Terminal Strength: Per MIL-STD-202, method 211, test condition A: For IM-1, 3 lb pull; for IM-2, IM-4, IM-6, IM-8, IM-9 and IM-10, 5 lb pull and twist Weight: IM-1 = 0.25 g maximum, IM-2 = 0.30 g maximum, IM-4 = 0.65 g maximum, IM-6 = 0.95 g maximum, IM-8 = 1.5 g maximum, IM-9 = 2.0 g maximum, IM-10 = 2.5 g maximum (1) * H/P 4342A Q-meter * Measurements corporation megacycle meter, model 59 * Wheatstone bridge Note (1) Test procedure per MIL-PRF-15305 INDUCTANCE RANGE AND MILITARY STANDARD MATERIAL SPECIFICATIONS Encapsulant: Epoxy Standard Terminals: IM-1 and IM-2: 24 AWG; IM-4, IM-6 and IM-9: 22 AWG; IM-8: 21 AWG; IM-10: 20 AWG, tinned copper MODEL IM-1 IM-2 ENVIRONMENTAL PERFORMANCE TEST CONDITIONS SPECIFICATIONS Barometric C MIL-STD-202, method 105 Pressure Thermal Shock A-1 MIL-STD-202, method 107 Flammability MIL-STD-202, method 111 Overload MIL-PRF-15305 Low Temperature MIL-PRF-15305 Storage Resistance to A MIL-STD-202, method 210 Soldering Heat Resistance to MIL-STD-202, method 215 Solvents IM-4 IM-6 IM-8 IM-9 IM-10 INDUCTANCE RANGE (H) MIN. MAX. 0.10 100 0.022 0.082 0.10 1 1.2 27 33 1000 0.15 4.7 5.6 33 36 240 270 1800 0.10 2.7 3.3 27 33 220 270 1000 1100 3600 68 150 3900 10 000 DIMENSIONS in inches [millimeters] C Typ. B D Dia. MODEL IM-1 IM-2 IM-4 IM-6 IM-8 IM-9 IM-10 Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Revision: 21-Feb-12 A (DIA.) 0.086 [2.18] 0.070 [1.78] 0.105 [2.67] 0.085 [2.16] 0.165 [4.19] 0.145 [3.68] 0.200 [5.08] 0.180 [4.57] 0.225 [5.72] 0.205 [5.21] 0.260 [6.60] 0.240 [6.10] 0.250 [6.35] 0.230 [5.84] A Dia. B 0.210 [5.33] 0.190 [4.83] 0.260 [6.60] 0.240 [6.10] 0.385 [9.78] 0.365 [9.27] 0.450 [11.43] 0.430 [10.92] 0.570 [14.48] 0.550 [13.97] 0.570 [14.48] 0.550 [13.97] 0.750 [19.05] 0.730 [18.54] C (TYP.) 1.62 [41.15] 1.38 [35.05] 1.63 [41.40] 1.25 [31.75] 1.63 [41.40] 1.25 [31.75] 1.63 [41.40] 1.25 [31.75] 1.63 [41.40] 1.25 [31.75] 1.63 [41.40] 1.25 [31.75] 1.63 [41.40] 1.25 [31.75] D (DIA.) 0.0215 [0.546] 0.0185 [0.470] 0.0215 [0.546] 0.0185 [0.470] 0.027 [0.686] 0.023 [0.584] 0.027 [0.686] 0.023 [0.584] 0.030 [0.762] 0.026 [0.660] 0.027 [0.686] 0.023 [0.584] 0.034 [0.864] 0.030 [0.762] Document Number: 34030 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IM www.vishay.com Vishay Dale Revision: 21-Feb-12 DCR MAX. () 0.13 0.15 0.18 0.21 0.25 0.38 0.49 0.59 0.62 0.18 0.20 0.22 0.25 0.28 0.49 0.56 0.72 0.85 1.2 1.5 2.1 2.8 3.2 4.4 5.2 3.0 3.4 3.8 4.3 4.7 5.2 6.8 8.2 10.0 11.5 16.0 17.5 0.025 0.03 0.035 0.04 0.045 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.14 0.16 0.22 0.30 0.35 0.50 0.60 0.85 1.0 RATED DC CURRENT (mA) (2) 895 835 760 705 645 525 460 420 410 510 485 465 435 410 310 290 257 236 198 178 150 130 122 104 95 126 118 112 105 100 95 83.5 76 69 64 54.5 52 2400 2200 2000 1900 1800 1700 1500 1400 1350 1270 1200 1105 1025 960 815 700 650 545 495 415 385 IRON CORE SRF MIN. (MHz) (1) 680.0 650.0 560.0 540.0 500.0 440.0 410.0 380.0 340.0 250.0 215.0 200.0 190.0 170.0 150.0 135.0 130.0 110.0 100.0 95.0 88.0 78.0 69.0 52.0 47.0 31.0 26.0 23.0 20.0 17.0 15.0 13.5 12.5 11.5 10.5 10.0 9.5 900.0 875.0 850.0 825.0 800.0 775.0 750.0 725.0 680.0 640.0 600.0 550.0 510.0 430.0 410.0 365.0 330.0 300.0 275.0 250.0 230.0 PHENOLIC CORE IND. TEST FREQUENCY Q TOL. Q MODEL (H) (%) MIN. (MHz) IM-1 0.10 10 35 25.0 IM-1 0.12 10 35 25.0 IM-1 0.15 10 35 25.0 IM-1 0.18 10 35 25.0 IM-1 0.22 10 30 25.0 IM-1 0.27 10 30 25.0 IM-1 0.33 10 25 25.0 IM-1 0.39 10 25 25.0 IM-1 0.47 10 25 25.0 IM-1 0.56 10 40 25.0 IM-1 0.68 10 40 25.0 IM-1 0.82 10 40 25.0 IM-1 1.0 10 40 25.0 IM-1 1.2 10 35 7.9 IM-1 1.5 10 40 7.9 IM-1 1.8 10 40 7.9 IM-1 2.2 10 45 7.9 IM-1 2.7 10 45 7.9 IM-1 3.3 10 45 7.9 IM-1 3.9 10 50 7.9 IM-1 4.7 10 55 7.9 IM-1 5.6 10 55 7.9 IM-1 6.8 10 55 7.9 IM-1 8.2 10 45 7.9 IM-1 10.0 10 45 7.9 IM-1 12.0 10 40 2.5 IM-1 15.0 10 40 2.5 IM-1 18.0 10 40 2.5 IM-1 22.0 10 45 2.5 IM-1 27.0 10 45 2.5 IM-1 33.0 10 45 2.5 IM-1 39.0 10 45 2.5 IM-1 47.0 10 45 2.5 IM-1 56.0 10 45 2.5 IM-1 68.0 10 45 2.5 IM-1 82.0 10 45 2.5 IM-1 100.0 10 45 2.5 IM-2 0.022 10 50 50.0 IM-2 0.027 20 40 25.0 IM-2 0.033 10 40 25.0 IM-2 0.039 10 40 25.0 IM-2 0.047 10 40 25.0 IM-2 0.056 10 40 25.0 IM-2 0.068 10 40 25.0 IM-2 0.082 10 40 25.0 IM-2 0.10 10 40 25.0 IM-2 0.12 10 40 25.0 IM-2 0.15 10 38 25.0 IM-2 0.18 10 35 25.0 IM-2 0.22 10 33 25.0 IM-2 0.27 10 33 25.0 IM-2 0.33 10 30 25.0 IM-2 0.39 10 30 25.0 IM-2 0.47 10 30 25.0 IM-2 0.56 10 30 25.0 IM-2 0.68 10 28 25.0 IM-2 0.82 10 28 25.0 IM-2 1.0 10 25 25.0 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table PHENOLIC CORE STANDARD ELECTRICAL SPECIFICATIONS Document Number: 34030 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IM www.vishay.com Vishay Dale Revision: 21-Feb-12 RATED DC CURRENT (mA) (2) 590 535 455 395 355 270 250 230 185 175 155 130 155 150 145 140 135 130 125 110 100 92 88 84 66 61 57 52 47 45 40 36 35 30 29 28 2450 1810 1400 1225 1150 1100 900 785 650 600 525 435 385 300 280 260 495 395 360 290 265 240 FERRITE CORE DCR MAX. () 0.18 0.22 0.30 0.40 0.55 0.85 1.0 1.2 1.8 2.0 2.7 3.7 2.7 2.8 3.1 3.3 3.5 3.4 3.6 4.5 5.7 6.7 7.3 8 13 15 17 21 25 28 35 42 46 60 65 72 0.03 0.055 0.09 0.12 0.135 0.15 0.22 0.29 0.42 0.50 0.65 0.95 1.20 2.0 2.30 2.60 0.32 0.50 0.60 0.90 1.10 1.40 PHENOLIC CORE SRF MIN. (MHz) (1) 150.0 140.0 125.0 115.0 100.0 90.0 80.0 75.0 65.0 60.0 55.0 50.0 40.0 35.0 30.0 25.0 20.0 24.0 22.0 20.0 18.0 15.0 14.0 13.0 12.0 11.0 10.0 9.0 8.0 7.0 6.5 6.0 5.0 4.0 3.8 3.4 525.0 450.0 360.0 310.0 280.0 250.0 220.0 200.0 180.0 160.0 150.0 135.0 120.0 110.0 100.0 90.0 60.0 55.0 50.0 45.0 42.0 40.0 IRON CORE IND. TEST FREQUENCY Q TOL. Q MODEL (H) (%) MIN. (MHz) IM-2 1.2 10 25 7.9 IM-2 1.5 10 28 7.9 IM-2 1.8 10 30 7.9 IM-2 2.2 10 30 7.9 IM-2 2.7 10 37 7.9 IM-2 3.3 10 45 7.9 IM-2 3.9 10 45 7.9 IM-2 4.7 10 45 7.9 IM-2 5.6 10 50 7.9 IM-2 6.8 10 50 7.9 IM-2 8.2 10 55 7.9 IM-2 10.0 10 55 7.9 IM-2 12.0 10 45 2.5 IM-2 15.0 10 40 2.5 IM-2 18.0 10 50 2.5 IM-2 22.0 10 50 2.5 IM-2 27.0 10 50 2.5 IM-2 33.0 10 45 2.5 IM-2 39.0 10 45 2.5 IM-2 47.0 10 45 2.5 IM-2 56.0 10 45 2.5 IM-2 68.0 10 50 2.5 IM-2 82.0 10 50 2.5 IM-2 100.0 10 50 2.5 IM-2 120.0 10 30 0.79 IM-2 150.0 10 30 0.79 IM-2 180.0 10 30 0.79 IM-2 220.0 10 30 0.79 IM-2 270.0 10 30 0.79 IM-2 330.0 10 30 0.79 IM-2 390.0 10 30 0.79 IM-2 470.0 10 30 0.79 IM-2 560.0 10 30 0.79 IM-2 680.0 10 30 0.79 IM-2 820.0 10 30 0.79 IM-2 1000.0 10 30 0.79 IM-4 0.15 20 50 25 IM-4 0.22 20 50 25 IM-4 0.33 20 45 25 IM-4 0.47 20 45 25 IM-4 0.56 10 50 25 IM-4 0.68 10 50 25 IM-4 0.82 10 50 25 IM-4 1.0 10 50 25 IM-4 1.2 10 33 7.9 IM-4 1.5 10 33 7.9 IM-4 1.8 10 33 7.9 IM-4 2.2 10 33 7.9 IM-4 2.7 10 33 7.9 IM-4 3.3 10 33 7.9 IM-4 3.9 10 33 7.9 IM-4 4.7 10 33 7.9 IM-4 5.6 10 45 7.9 IM-4 6.8 10 50 7.9 IM-4 8.2 10 50 7.9 IM-4 10.0 10 55 7.9 IM-4 12.0 10 65 2.5 IM-4 15.0 10 65 2.5 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table IRON CORE STANDARD ELECTRICAL SPECIFICATIONS Document Number: 34030 3 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IM www.vishay.com Vishay Dale Revision: 21-Feb-12 SRF MIN. (MHz) (1) 34.0 30.0 25.0 19.0 15.5 14.5 13.7 13.0 12.7 12.0 11.5 11.0 10.5 10.3 10.0 9.5 8.9 8.7 8.5 8.0 7.5 7.0 6.5 6.2 5.9 5.7 5.4 5.1 4.8 4.5 4.2 3.9 3.7 3.5 3.3 3.1 2.9 2.7 2.5 2.3 2.1 2.0 1.9 1.8 1.7 1.6 510.0 510.0 510.0 450.0 415.0 380.0 350.0 320.0 300.0 270.0 DCR MAX. () 2.25 2.50 2.60 3.0 2.50 2.60 2.70 2.75 2.85 3.00 3.15 3.30 3.70 3.90 4.30 4.50 4.90 5.20 5.45 6.05 6.40 6.75 7.10 7.45 7.80 11.0 11.5 12.0 15.5 16.3 17.1 17.9 18.8 24.7 25.9 27.2 28.6 30.0 31.5 33.1 43.5 45.7 49.0 52.5 54.0 56.7 0.020 0.025 0.030 0.030 0.035 0.050 0.065 0.080 0.085 0.125 RATED DC CURRENT (mA) (2) 185 175 170 165 180 176 172 170 167 164 160 156 147 143 136 133 128 124 121 114 111 108 106 103 101 129 125 123 108 105 102 100 98 85 83 81 79 77 76 74 64 63 61 59 58 56 3600 3300 3000 2900 2800 2400 2000 1800 1700 1450 PHENOLIC CORE IND. TEST FREQUENCY Q TOL. Q MODEL (H) (%) MIN. (MHz) IM-4 18.0 10 75 2.5 IM-4 22.0 10 75 2.5 IM-4 27.0 10 60 2.5 IM-4 33.0 10 65 2.5 IM-4 36.0 5 60 2.5 IM-4 39.0 5 60 2.5 IM-4 43.0 5 60 2.5 IM-4 47.0 5 55 2.5 IM-4 51.0 5 55 2.5 IM-4 56.0 5 55 2.5 IM-4 62.0 5 55 2.5 IM-4 68.0 5 55 2.5 IM-4 75.0 5 55 2.5 IM-4 82.0 5 50 2.5 IM-4 91.0 5 50 2.5 IM-4 100.0 5 50 2.5 IM-4 110.0 5 60 0.79 IM-4 120.0 5 65 0.79 IM-4 130.0 5 65 0.79 IM-4 150.0 5 65 0.79 IM-4 160.0 5 65 0.79 IM-4 180.0 5 65 0.79 IM-4 200.0 5 65 0.79 IM-4 220.0 5 65 0.79 IM-4 240.0 5 65 0.79 IM-4 270.0 5 65 0.79 IM-4 300.0 5 65 0.79 IM-4 330.0 5 65 0.79 IM-4 360.0 5 65 0.79 IM-4 390.0 5 65 0.79 IM-4 430.0 5 65 0.79 IM-4 470.0 5 65 0.79 IM-4 510.0 5 65 0.79 IM-4 560.0 5 65 0.79 IM-4 620.0 5 65 0.79 IM-4 680.0 5 55 0.79 IM-4 750.0 5 55 0.79 IM-4 820.0 5 55 0.79 IM-4 910.0 5 55 0.79 IM-4 1000.0 5 55 0.79 IM-4 1100.0 5 30 0.25 IM-4 1200.0 5 30 0.25 IM-4 1300.0 5 30 0.25 IM-4 1500.0 5 30 0.25 IM-4 1600.0 5 30 0.25 IM-4 1800.0 5 30 0.25 IM-6 0.10 20 55 25.0 IM-6 0.12 20 55 25.0 IM-6 0.15 20 55 25.0 IM-6 0.18 20 55 25.0 IM-6 0.22 20 50 25.0 IM-6 0.27 20 50 25.0 IM-6 0.33 20 50 25.0 IM-6 0.39 20 50 25.0 IM-6 0.47 20 50 25.0 IM-6 0.56 10 50 25.0 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table IRON CORE STANDARD ELECTRICAL SPECIFICATIONS Document Number: 34030 4 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IM www.vishay.com Vishay Dale Revision: 21-Feb-12 DCR MAX. () 0.150 0.205 0.290 0.400 0.485 0.740 0.970 1.20 0.140 0.155 0.210 0.280 0.375 0.440 0.605 1.05 1.20 1.95 2.20 2.75 3.5 3.8 4.0 4.4 4.7 5.3 6.0 5.0 5.8 6.6 7.4 8.2 8.7 9.1 9.6 10.0 10.6 11.1 11.6 12.3 13.0 13.7 14.4 15.1 15.8 16.5 21.0 22.0 23.0 25.0 26.0 28.0 29.0 RATED DC CURRENT (mA) (2) 1300 1100 930 785 700 580 505 460 990 870 745 645 560 540 440 370 310 255 240 205 185 176 170 164 156 143 133 124 118 114 112 110 107 105 102 100 97 95 93 91 88 85 83 81 79 78 78 76 75 72 70 68 67 IRON CORE SRF MIN. (MHz) (1) 250.0 210.0 200.0 180.0 170.0 150.0 140.0 120.0 70.0 65.0 60.0 50.0 50.0 48.0 42.0 36.0 30.0 30.0 24.0 22.0 20.0 18.0 16.0 15.0 12.0 10.0 8.0 6.0 5.4 5.0 4.7 5.6 5.3 5.0 4.7 4.5 4.3 4.0 3.8 3.6 3.5 3.4 3.3 3.1 2.9 2.8 2.8 2.7 2.6 2.4 2.3 2.2 2.1 IRON CORE IND. TEST FREQUENCY Q TOL. Q MODEL (H) (%) MIN. (MHz) IM-6 0.68 10 45 25.0 IM-6 0.82 10 40 25.0 IM-6 1.0 10 40 25.0 IM-6 1.2 10 30 7.9 IM-6 1.5 10 30 7.9 IM-6 1.8 10 30 7.9 IM-6 2.2 10 30 7.9 IM-6 2.7 10 30 7.9 IM-6 3.3 10 30 7.9 IM-6 3.9 10 30 7.9 IM-6 4.7 10 30 7.9 IM-6 5.6 10 30 7.9 IM-6 6.8 10 30 7.9 IM-6 8.2 10 30 7.9 IM-6 10.0 10 30 7.9 IM-6 12.0 10 50 2.5 IM-6 15.0 10 55 2.5 IM-6 18.0 10 60 2.5 IM-6 22.0 10 60 2.5 IM-6 27.0 10 65 2.5 IM-6 33.0 10 75 2.5 IM-6 39.0 10 75 2.5 IM-6 47.0 10 75 2.5 IM-6 56.0 10 75 2.5 IM-6 68.0 10 75 2.5 IM-6 82.0 10 75 2.5 IM-6 100.0 10 65 2.5 IM-6 120.0 10 65 0.79 IM-6 150.0 10 65 0.79 IM-6 180.0 10 65 0.79 IM-6 220.0 10 65 0.79 IM-6 270.0 5 65 0.79 IM-6 300.0 5 65 0.79 IM-6 330.0 5 65 0.79 IM-6 360.0 5 65 0.79 IM-6 390.0 5 65 0.79 IM-6 430.0 5 65 0.79 IM-6 470.0 5 65 0.79 IM-6 510.0 5 65 0.79 IM-6 560.0 5 65 0.79 IM-6 620.0 5 60 0.79 IM-6 680.0 5 60 0.79 IM-6 750.0 5 60 0.79 IM-6 820.0 5 60 0.79 IM-6 910.0 5 60 0.79 IM-6 1000.0 5 60 0.79 IM-8 1100.0 5 60 0.25 IM-8 1200.0 5 60 0.25 IM-8 1300.0 5 60 0.25 IM-8 1500.0 5 65 0.25 IM-8 1600.0 5 65 0.25 IM-8 1800.0 5 65 0.25 IM-8 2000.0 5 65 0.25 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table PHENOLIC CORE STANDARD ELECTRICAL SPECIFICATIONS Document Number: 34030 5 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IM www.vishay.com Vishay Dale DCR MAX. () 30.0 31.0 33.0 35.0 38.0 40.0 3.3 3.5 3.8 4.7 5.3 44.0 46.0 48.0 50.0 53.0 56.0 59.0 62.0 65.0 68.0 72.0 RATED DC CURRENT (mA) (2) 66 64 62 61 58 57 168 162 155 142 132 61 59 58 57 56 54 52 51 50 49 47 IRON CORE SRF MIN. (MHz) (1) 2.0 1.9 1.8 1.7 1.6 1.5 13.0 11.7 10.7 9.3 8.3 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 1.05 1.00 0.95 IRON CORE IND. TEST FREQUENCY Q TOL. Q MODEL (H) (%) MIN. (MHz) IM-8 2200.0 5 70 0.25 IM-8 2400.0 5 70 0.25 IM-8 2700.0 5 70 0.25 IM-8 3000.0 5 70 0.25 IM-8 3300.0 5 70 0.25 IM-8 3600.0 5 70 0.25 IM-9 68.0 10 70 2.5 IM-9 82.0 10 65 2.5 IM-9 100.0 10 65 2.5 IM-9 120.0 10 75 0.79 IM-9 150.0 10 75 0.79 IM-10 3900.0 5 80 0.25 IM-10 4300.0 5 80 0.25 IM-10 4700.0 5 80 0.25 IM-10 5000.0 5 80 0.25 IM-10 5600.0 5 80 0.25 IM-10 6200.0 5 80 0.25 IM-10 6800.0 5 80 0.25 IM-10 7500.0 5 80 0.25 IM-10 8200.0 5 80 0.25 IM-10 9100.0 5 80 0.25 IM-10 10 000.0 5 80 0.25 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table IRON CORE STANDARD ELECTRICAL SPECIFICATIONS MAXIMUM TEMPERATURE RISE OPERATING TEMPERATURE RANGE IM-1 0.10 iH to .47 iH = 35 C at + 90 C ambient - 55 C to + 125 C 0.56 iH to 1000 iH = 15 C at + 90 C ambient - 55 C to + 105 C 0.022 iH to 1.0 iH = 35 C at + 90 C ambient - 55 C to + 125 C IM-2 IM-4 IM-6 1.2 iH to 27 iH = 15 C at + 90 C ambient - 55 C to + 105 C 33 iH to 1000 iH = 15 C at + 90 C ambient - 55 C to + 105 C 0.15 iH to 4.7 iH = 35 C at + 90 C ambient - 55 C to + 125 C 5.6 iH to 33 iH = 15 C at + 90 C ambient - 55 C to + 105 C 36 iH to 240 iH = 15 C at + 90 C ambient - 55 C to + 105 C 270 iH to 1800 iH = 35 C at + 90 C ambient - 55 C to + 125 C 0.1 iH to 2.7 iH = 35 C at + 90 C ambient - 55 C to + 125 C 3.3 iH to 1000 iH = 15 C at + 90 C ambient - 55 C to + 105 C = 15 C at + 90 C ambient - 55 C to + 105 C IM-8, IM-9, IM-10 ORDERING INFORMATION IM-2 10 H 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M 0 MODEL Revision: 21-Feb-12 2 E R PACKAGE CODE 1 0 INDUCTANCE VALUE 0 K INDUCTANCE TOLERANCE Document Number: 34030 6 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000