©2013 Semiconductor Components Industries, LLC.
October-2017, Rev. 3
Publication Order Number:
ISL9V3040P3/D
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 /
ISL9V3040S3
EcoSPARK® 300mJ, 400V, N-Channel Ignition IGBT
General Description
The ISL9V3040D3S, ISL9V3040S3S, ISL9V3040P3, and
ISL9V3040S3 are the next generation ignition IGBTs that offer
outstanding SCIS capability in the space saving D-Pak (TO-252), as
well as the industry standard D²-Pak (TO-263), and TO-262 and TO-
220 plastic packages. This device is intended for use in automotive
ignition circuits, specifically as a coil driver. Internal diodes provide
voltage clamping without the need for external components.
EcoSPARK® devices can be custom made to specific clamp
voltages. Contact your nearest On Semiconductor sales office for
more information.
Formerly Developmental Type 49362
Applications
• Automotive Ignition Coil Driver Circuits
• Coil- On Plug Applications
Features
• Space saving D-Pak package availability
• SCIS Energy = 300mJ at TJ = 25oC
•Logic Level Gate Drive
Device Maximum Ratings TA = 25°C unless otherwise noted
Symbol Parameter Ratings Units
BVCER Collector to Emitter Breakdown Voltage (IC = 1 mA) 430 V
BVECS Emitter to Collector Voltage - Reverse Battery Condition (IC = 10 mA) 24 V
ESCIS25 At Starting TJ = 25°C, ISCIS = 14.2A, L = 3.0 mHy 300 mJ
ESCIS150 At Starting TJ = 150°C, ISCIS = 10.6A, L = 3.0 mHy 170 mJ
IC25 Collector Current Continuous, At TC = 25°C, See Fig 9 21 A
IC110 Collector Current Continuous, At TC = 110°C, See Fig 9 17 A
VGEM Gate to Emitter Voltage Continuous ±10 V
PDPower Dissipation Total TC = 25°C 150 W
Power Dissipation Derating TC > 25°C 1.0 W/°C
TJOperating Junction Temperature Range -40 to 175 °C
TSTG Storage Junction Temperature Range -40 to 175 °C
TLMax Lead Temp for Soldering (Leads at 1.6mm from Case for 10s) 300 °C
Tpkg Max Lead Temp for Soldering (Package Body for 10s) 260 °C
ESD Electrostatic Discharge Voltage at 100pF, 1500Ω4kV
Package
GATE
COLLECTOR
EMITTER
R
2
R
1
Symbol
JEDEC TO-252AA
D-Pak
D²-Pak
JEDEC TO-263AB
COLLECTOR
(FLANGE)
JEDEC TO-220AB
E
G
E
G
JEDEC TO-262AA
E
G
C
E
G
C
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
Package Marking and Ordering Information
Electrical Characteristics TA = 25°C unless otherwise noted
Off State Characteristics
On State Characteristics
Dynamic Characteristics
Switching Characteristics
Thermal Characteristics
Device Marking Device Package Reel Size Tape Width Quantity
V3040D ISL9V3040D3ST TO-252AA 330mm 16mm 2500
V3040S ISL9V3040S3ST TO-263AB 330mm 24mm 800
V3040S ISL9V3040S3 TO-262AA Tube N/A 50
V3040D ISL9V3040D3S TO-252AA Tube N/A 75
V3040S ISL9V3040S3S TO-263AB Tube N/A 50
Symbol Parameter Test Conditions Min Typ Max Units
BVCER Collector to Emitter Breakdown Voltage IC = 2mA, VGE = 0,
RG = 1KΩ, See Fig. 15
TJ = -40 to 150°C
370 400 430 V
BVCES Collector to Emitter Breakdown Voltage IC = 10mA, VGE = 0,
RG = 0, See Fig. 15
TJ = -40 to 150°C
390 420 450 V
BVECS Emitter to Collector Breakdown Voltage IC = -75mA, VGE = 0V,
TC = 25°C
30 - - V
BVGES Gate to Emitter Breakdown Voltage IGES = ± 2mA ±12 ±14 - V
ICER Collector to Emitter Leakage Current VCER = 250V,
RG = 1KΩ,
See Fig. 11
TC = 25°C- - 2
5 µA
TC = 150°C- - 1 m
A
IECS Emitter to Collector Leakage Current VEC = 24V, See
Fig. 11
TC = 25°C- - 1 mA
TC = 150°C- - 40 mA
R1Series Gate Resistance - 70 - Ω
R2Gate to Emitter Resistance 10K - 26K Ω
VCE(SAT) Collector to Emitter Saturation Voltage IC = 6A,
VGE = 4V
TC = 25°C,
See Fig. 3
- 1.25 1.60 V
VCE(SAT) Collector to Emitter Saturation Voltage IC = 10A,
VGE = 4.5V
TC = 150°C,
See Fig. 4
- 1.58 1.80 V
VCE(SAT) Collector to Emitter Saturation Voltage IC = 15A,
VGE = 4.5V
TC = 150°C - 1.90 2.20 V
QG(ON) Gate Charge IC = 10A, VCE = 12V,
VGE = 5V, See Fig. 14
-17-nC
VGE(TH) Gate to Emitter Threshold Voltage IC = 1.0mA,
VCE = VGE,
See Fig. 10
TC = 25°C1.3 - 2.2 V
TC = 150°C0.7
5 - 1.8 V
VGEP Gate to Emitter Plateau Voltage IC = 10A, VCE = 12V - 3.0 - V
td(ON)R Current Turn-On Delay Time-Resistive VCE = 14V, RL = 1Ω,
VGE = 5V, RG = 1KΩ
TJ = 25°C, See Fig. 12
-0.74µs
trR Current Rise Time-Resistive - 2.1 7 µs
td(OFF)LCurrent Turn-Off Delay Time-Inductive VCE = 300V, L = 500µHy,
VGE = 5V
, RG = 1KΩ
TJ = 25°C, See Fig. 12
- 4.8 15 µs
tfL Current Fall Time-Inductive - 2.8 15 µs
SCIS Self Clamped Inductive Switching TJ = 25°C, L = 3.0 mHy,
RG = 1KΩ, VGE = 5V, See
Fig. 1 & 2
- - 300 mJ
RθJC Thermal Resistance Junction-Case All packages - - 1.0 °C/W
V3040P ISL9V3040P3 TO-220AB Tube N/A 50
www.onsemi.com
2
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
Typical Performance Curves
Figure 1. Self Clamped Inductive Switching
Current vs Time in Clamp
Figure 2. Self Clamped Inductive Switching
Current vs Inductance
Figure 3. Collector to Emitter On-State Voltage vs
Junction Temperature
Figure 4. Collector to Emitter On-State Voltage
vs Junction Temperature
Figure 5. Collector to Emitter On-State Voltage vs
Collector Current
Figure 6. Collector to Emitter On-State Voltage
vs Collector Current
tCLP, TIME IN CLAMP (µS)
ISCIS, INDUCTIVE SWITCHING CURRENT (A)
25
15
5
30
20
10
0
RG = 1kΩ, VGE = 5V,Vdd = 14V
200175150012550
25 75 100
TJ = 25°C
TJ = 150°C
SCIS Curves valid for Vclamp Voltages of <430V
25
15
5
30
20
10
0
ISCIS, INDUCTIVE SWITCHING CURRENT (A)
0102468
TJ = 25°C
TJ = 150°C
L, INDUCTANCE (mHy)
RG = 1kΩ, VGE = 5V,Vdd = 14V
SCIS Curves valid for Vclamp Voltages of <430V
1.30
1.26
1.22
1.18
1.14
-75 25-25 17512575-50 0 50 100 150
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
ICE = 6A
-75 25-25 17512575-50 0 50 100 150
1.8
1.7
1.6
1.5
1.4
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
ICE = 10A
1.3
1.2
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
20
0
10
02.01.0 3.0 4.0
25
15
5
TJ = - 40°C
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
TJ = 25°C
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
20
10
0
25
15
5
02.01.0 3.0 4.0
www.onsemi.com
3
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
Typical Performance Curves (Continued)
Figure 7. Collector to Emitter On-State Voltage vs
Collector Current
Figure 8. Transfer Characteristics
Figure 9. DC Collector Current vs Case
Temperature
Figure 10. Threshold Voltage vs Junction
Temperature
Figure 11. Leakage Current vs Junction
Temperature
Figure 12. Switching Time vs Junction
Temperature
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
25
15
5
0
20
10
02.01.0 3.0 4.0
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
TJ = 175°C
ICE, COLLECTOR TO EMITTER CURRENT (A)
VGE, GATE TO EMITTER VOLTAGE (V)
2.01.0 3.0 4.0
25
15
5
0
20
10
PULSE DURATION = 250µs
DUTY CYCLE < 0.5%, VCE = 5V
TJ = 25°C
TJ = 150°C
2.51.5 3.5 4.5
TJ = -40°C
ICE, DC COLLECTOR CURRENT (A)
TC, CASE TEMPERATURE (°C)
25
25 1751257550 100 150
20
15
10
5
0
VGE = 4.0V
2.2
17550 100
2.0
1.8
1.6
1.4
1.0
VCE = VGE
VTH, THRESHOLD VOLTAGE (V)
TJ JUNCTION TEMPERATURE (°C)
1500-50 1257525-25
1.2
ICE = 1mA
LEAKAGE CURRENT (µA)
TJ, JUNCTION TEMPERATURE (°C)
1000
10
0.1
10000
100
1
25-25 17512575-50 0 50 100 150
VCES = 250V
VECS = 24V
VCES = 300V
25 1751257550 100 150
TJ, JUNCTION TEMPERATURE (°C)
SWITCHING TIME (µS)
12
10
8
6
4
2
ICE = 6.5A, VGE = 5V, RG = 1KΩ
Resistive tOFF
Inductive tOFF
Resistive tON
www.onsemi.com
4
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
Typical Performance Curves (Continued)
Figure 13. Capacitance vs Collector to Emitter
Voltage
Figure 14. Gate Charge
Figure 15. Breakdown Voltage vs Series Gate Resistance
Figure 16. IGBT Normalized Transient Thermal Impedance, Junction to Case
C, CAPACITANCE (pF)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
1600
800
400
1200
0105152025
0
CIES
COES
CRES
FREQUENCY = 1 MHz
QG, GATE CHARGE (nC)
VGE, GATE TO EMITTER VOLTAGE (V)
0
2
4
8
0 4 8 1
216202428
3
5
7
6
1
32
IG(REF) = 1mA, RL = 1.25Ω, TJ = 25°C
VCE = 6V
VCE = 12V
BVCER, BREAKDOWN VOLTAGE (V)
RG, SERIES GATE RESISTANCE (kΩ)
430
410
400
420
10 20001000 3000
390
100
415
405
425
395
TJ = - 40°C
TJ = 25°C
TJ = 175°C
ICER = 10mA
ZthJC, NORMALIZED THERMAL RESPONSE
T1, RECTANGULAR PULSE DURATION (s)
100
10-2
10-1
10-2
10-3
10-4
10-5 10-1
DUTY FACTOR, D = t
1
/ t
2
PEAK T
J
= (P
D
X Z
θ
JC
X R
θ
JC
) + T
C
t
1
t
2
P
D
10-6
0.5
0.2
0.1
0.05
0.02
0.01
SINGLE PULSE
10-3
www.onsemi.com
5
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
Test Circuit and Waveforms
Figure 17. Inductive Switching Test Circuit Figure 18. tON and tOFF Switching Test Circuit
Figure 19. Energy Test Circuit Figure 20. Energy Waveforms
RGG
C
E
VCE
L
PULSE
GENDUT RG = 1KΩ+
-
VCE
DUT
5V
C
G
E
LOAD
R
or
L
tP
VGE
0.01Ω
L
IAS
+
-
VCE
VDD
RG
VARY t P TO OBTAIN
REQUIRED PEAK IAS
0V
DUT
G
C
E
VDD
VCE
BVCES
tP
IAS
tAV
0
www.onsemi.com
6
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 / ISL9V3040S3
SPICE Thermal Model
REV 7 March 2002
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 /
ISL9V3040S3
CTHERM1 th 6 2.1e -3
CTHERM2 6 5 1.4e -1
CTHERM3 5 4 7.3e -3
CTHERM4 4 3 2.1e -1
CTHERM5 3 2 1.1e -1
CTHERM6 2 tl 6.2e +6
RTHERM1 th 6 1.2e -1
RTHERM2 6 5 1.9e -1
RTHERM3 5 4 2.2e -1
RTHERM4 4 3 6.0e -2
RTHERM5 3 2 5.8e -2
RTHERM6 2 tl 1.6e -3
SABER Thermal Model
SABER thermal model
ISL9V3040D3S / ISL9V3040S3S / ISL9V3040P3 /
ISL9V3040S3
template thermal_model th tl
thermal_c th, tl
{
ctherm.ctherm1 th 6 = 2.1e -3
ctherm.ctherm2 6 5 = 1.4e -1
ctherm.ctherm3 5 4 = 7.3e -3
ctherm.ctherm4 4 3 = 2.2e -1
ctherm.ctherm5 3 2 =1.1e -1
ctherm.ctherm6 2 tl = 6.2e +6
rtherm.rtherm1 th 6 = 1.2e -1
rtherm.rtherm2 6 5 = 1.9e -1
rtherm.rtherm3 5 4 = 2.2e -1
rtherm.rtherm4 4 3 = 6.0e -2
rtherm.rtherm5 3 2 = 5.8e -2
rtherm.rtherm6 2 tl = 1.6e -3
}
RTHERM4
RTHERM6
RTHERM5
RTHERM3
RTHERM2
RTHERM1
CTHERM4
CTHERM6
CTHERM5
CTHERM3
CTHERM2
CTHERM1
tl
2
3
4
5
6
th JUNCTION
CASE
www.onsemi.com
7
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
❖
