DC60 Series * Bi-polar transistor output * Ratings from 3A to 7A @ 60 VDC * AC or DC control * UL and cUL Recognized (E116950) PRODUCT SELECTION Control Voltage 3.5-32 VDC 90-280 Vrms/VDC 3A 5A 7A DC60S3 DC60SA3 DC60S5 DC60SA5 DC60S7 DC60SA7 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 3A 5A 7A Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [mA] Maximum Load Current [ADC] (2) Minimum Load Current [mA] Maximum Surge Current [Adc] (10ms) Maximum On-State Voltage Drop @ Rated Current [Vdc] Thermal Resistance Junction to Case (Rjc) [C/W] 3-60 0.1 3 20 6 1.3 2.2 3-60 0.1 5 20 10 1.5 2.2 3-60 0.1 7 20 14 1.7 2.2 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage (3) Minimum Turn-Off Voltage (4) Typical Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (5) Maximum Turn-Off Time [msec] (6) DC60Sx DC60SAx 3.5-32 VDC 3.5 VDC 1.0 VDC 2.2 mA @ 5 VDC 1500 Ohm 0.1 0.3 90-280 Vrms/VDC 90 Vrms/VDC 10 Vrms/DC 2 mA @ 120 V, 4 mA @ 240 V 60K 10 40 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) [Vrms] Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Terminals Recommended Terminal Screw Torque Range: Parameters 4000 109 Ohm 8 pF -30 to 80C -40 to 125 C 3.0 oz (86.5g) Thermally conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted 6-32 Screws - 10 in lbs. 8-32 and 10-32 Screws -20 in. lbs. (Screws dry without grase) GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Heat sinking required, see derating curves. 3) Minimum turn-on voltage for -B, DC control is 1VDC and AC control is 10Vrms/VDC. 4) Minimum turn-off voltage for -B, DC control is 3.5VDC and AC control is 90Vrms/VDC. 5) Turn-on time for -B version is 300 s 6) Turn-off time for -B version is 100 s. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION WIRING DIAGRAM AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 Rev. 080812 ANNEX - ENVIROMENTAL INFORMATION