D-4 APEM www.apem.com
D
TR series
Tiny washable rocker switches
Distinctive features and specifications
MATERIALS
• Case : PBT
• Actuator : polyamide
• Contacts and terminals :
0: brass, gold plated
1: brass, silver plated
3: brass, gold plated
(1,27 micron gold)
8: contact brass, gold plated
+ tin plated terminals
9: contact brass, gold plated
(1,27 micron gold) + tin plated
terminals
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Strength of terminals : pull-out force - 10N max.
• Operating temperature : -30°C to +85°C
• Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3)
• Cleaning : solvents or water + detergent
• Wave soldering : 260°C - 5 sec.
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- gold plated contacts : 0,4VA 20V max. AC or DC
- silver plated contacts : 0,5A 48V max. AC or DC
• Minimum load : 10mA 50mV - 10µA 5VDC
• Contact resistance : 20 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals and frame
500 Vrms 50 Hz min. between terminals
• Electrical life at full load :
Contacts
Gold plated
Silver plated 60.000 30.000
20.000 10.000
Number of cycles
2 positions 3 positions
❑ Sealed
• Single piece case
• O-ring seal between actuator and bushing
• Epoxy sealed terminals
❑ Wide variety of contact materials
❑ Same PCB layout as tiny toggle (TL), pushbutton (TP)
and slide switches (TG)
02-Serie TR-A_02-Serie TR-A 21/11/12 17:55 Page4