Philips Semiconductors Product specification
74ABT573A
Octal D-type transparent latch (3-State)
1
1995 Sep 06 853–1455 15703
FEATURES
•74ABT573A is flow-through pinout version of 74ABT373
•Inputs and outputs on opposite side of package allow easy
interface to microprocessors
•3-State output buffers
•Common output enable
•Latch-up protection exceeds 500mA per JEDEC Std 17
•ESD protection exceeds 2000 V per MIL STD 883 Method 3015
and 200 V per Machine Model
•Power-up 3-State
•Power-up reset
DESCRIPTION
The 74ABT573A high-performance BiCMOS device combines low
static and dynamic power dissipation with high speed and high
output drive.
The 74ABT573A device is an octal transparent latch coupled to
eight 3-State output buffers. The two sections of the device are
controlled independently by Enable (E) and Output Enable (OE)
control gates. The 74ABT573A is functionally identical to the
74ABT373 but has a flow-through pinout configuration to facilitate
PC board layout and allow easy interface with microprocessors.
The data on the D inputs are transferred to the latch outputs when
the Latch Enable (E) input is High. The latch remains transparent to
the data inputs while E is High, and stores the data that is present
one setup time before the High-to-Low enable transition.
The 3-State output buffers are designed to drive heavily loaded
3-State buses, MOS memories, or MOS microprocessors. The
active-Low Output Enable (OE) controls all eight 3-State buffers
independent of the latch operation.
When OE is Low, the latched or transparent data appears at the
outputs. When OE is High, the outputs are in the High-impedance
”OFF” state, which means they will neither drive nor load the bus.
QUICK REFERENCE DATA
SYMBOL PARAMETER CONDITIONS
Tamb = 25°C; GND = 0V TYPICAL UNIT
tPLH
tPHL Propagation delay
Dn to Qn CL = 50pF; VCC = 5V 2.8
3.3 ns
CIN Input capacitance VI = 0V or VCC 3pF
COUT Output capacitance Outputs disabled; VO = 0V or VCC 6pF
ICCZ Total supply current Outputs disabled; VCC =5.5V 100 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER
20-Pin Plastic DIP –40°C to +85°C74ABT573A N 74ABT573A N SOT146-1
20-Pin plastic SO –40°C to +85°C74ABT573A D 74ABT573A D SOT163-1
20-Pin Plastic SSOP Type II –40°C to +85°C74ABT573A DB 74ABT573A DB SOT339-1
20-Pin Plastic TSSOP Type I –40°C to +85°C74ABT573A PW 74ABT573APW DH SOT360-1
PIN CONFIGURATION
20
19
18
17
16
15
14
13
12
10 11
9
8
7
6
5
4
3
2
1VCC
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
E
OE
D0
D1
D2
D3
D4
D5
D6
D7
GND
SA00185
PIN DESCRIPTION
PIN
NUMBER SYMBOL FUNCTION
1 OE Output enable input (active-Low)
2, 3, 4, 5,
6, 7, 8, 9 D0-D7 Data inputs
19, 18, 17,
16, 15, 14,
13, 12 Q0-Q7 Data outputs
11 E Enable input (active-High)
10 GND Ground (0V)
20 VCC Positive supply voltage