1
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
SMD B
17-21/R6C-AN2Q1B/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
Description
․The 17-21 SMD LED is much smaller than lead frame type components, thus enable smaller board ize,
higher packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Device Selection Guide
Chip
Materials
Emitted Color
Resin Color
AlGaInP
Brilliant Red
Water Clear
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
60
mA
Power Dissipation
Pd
60
mW
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Electrostatic Discharge
ESDHBM
2000
V
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
36.0
-----
90.0
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
140
-----
deg
IF=20mA
Peak Wavelength
λp
-----
632
-----
nm
IF=20mA
Dominant Wavelength
λd
617.5
-----
633.5
nm
IF=20mA
Spectrum Radiation Bandwidth
△λ
-----
20
-----
nm
IF=20mA
Forward Voltage
VF
1.75
-----
2.35
V
IF=20mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Note:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Dominant Wavelength: ±1nm
3.Tolerance of Forward Voltage ±0.1V
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Bin Range of Luminous Intensity
Bin Code
Min.
Max.
Unit
Condition
N2
36.0
45.0
mcd
IF =20mA
P1
45.0
57.0
P2
57.0
72.0
Q1
72.0
90.0
Note:
Tolerance of Luminous Intensity: ±11%
Bin Range of Dominant Wavelength
Group Bin
Min.
Max.
Unit
Condition
A
E4 617.5
621.5
nm
IF =20mA
E5 621.5
625.5
E6 625.5
629.5
E7 629.5
633.5
Notes:
Tolerance of Dominant Wavelength: ±1nm
Bin Range Of Forward Voltage
Group Bin
Min.
Max.
Unit
Condition
B
0 1.75
1.95
V
IF =20mA
1 1.95
2.15
2 2.15
2.35
Note:
Tolerance of Forward Voltage ±0.1V
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Typical Electro-Optical Characteristics Curves
Relative luminous intensity
Ambient Temperature Ta (°C)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
0
Forward Current
10
0
20
30
25
F
I (mA)
40
50
1
10
40
20 60 10085
-20-40 0 20 60
40 10080
100
%)
(
1000
Luminous Intensity vs.
Ambient Temperature
10
Relative luminous intensity
1
10
100
%)
(
1000
Forward Current
10 10
I (mA)
F
Ta=25°C
Luminous Intensity vs
Forward Current
%
Relative luminous intensity ()
Spectrum Distribution Forward Voltage Ta=25°C
Forward Current vs.
Radiation Diagram Ta=25°C
Wavelength λ (nm)
Ta=25°C
700650
600550
100
75
50
0
25
500
f=1KHz
Duty=1/10
Forward Current I (mA)
1.2
0
10
20
25
30
40
50
2.82.01.6 2.4 3.0
1.0
0.9
0.8
0.7
0.5 0.3 0.1 0.2 0.4 0.6
30°
40°
50°
60°
70°
80°
90°
0° 10° 20°
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Package Dimension
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Moisture Resistant Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength
Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
7
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
8
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
3°C/sec.Max.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
9
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once
in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each
terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
DATASHEET
SMD REFLECTOR
17-21/R6C-AN2Q1B/3T
10
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0002219 Rev.4
www.everlight.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
