GBJ25005 - GBJ2510
Document number: DS21221 Rev. 9 - 2
1 of 4
www.diodes.com
January 2018
© Diodes Incorporated
GBJ25005 - GBJ2510
25A GLASS PASSIVATED BRIDGE RECTIFIER
Features
Glass Passivated Die Construction
High Case Dielectric Strength of 2500VRMS
Low Reverse Leakage Current
Surge Overload Rating to 350A Peak
Ideal for Printed Circuit Board Applications
UL Listed Under Recognized Component
Index, File Number E94661
Lead Free Finish; RoHS Compliant (Notes 1 & 2)
Mechanical Data
Case: GBJ
Case Material: Molded Plastic. UL Flammability Classification
94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Plated Leads, Solderable per MIL-STD-202, Method
208
Lead Free Plating (Tin Finish).
Polarity: Molded on Body
Mounting: Through Hole for #6 Screw
Mounting Torque: 5.0 in-lbs Maximum
Marking: Type Number
Weight: 6.6 grams (Approximate)
Maximum Ratings (@TA = 25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
GBJ
25005
GBJ
2501
GBJ
2502
GBJ
2504
GBJ
2506
GBJ
2508
GBJ
2510
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50
100
200
400
600
800
1000
V
RMS Reverse Voltage
VR(RMS)
35
70
140
280
420
560
700
V
Average Forward Rectified Output Current
(Note 3) @ TC = 100°C
IO
25
A
Non-Repetitive Peak Forward Surge Current 8.3 ms
Single Half Sine-Wave Superimposed on rated Load
IFSM
350
A
Thermal Characteristics
Characteristic
Symbol
Value
Unit
Typical Thermal Resistance Junction to Case (Note 5)
RJC
1.0
°C/W
Operating and Storage Temperature Range
TJ, TSTG
-65 to +150
°C
Electrical Characteristics (@TA = 25°C, unless otherwise specified.)
Characteristic
Symbol
Value
Unit
Forward Voltage (per element) @ IF = 12.5A
VFM
1.05
V
Peak Reverse Current @ TC = 25°C
at Rated DC Blocking Voltage @ TC = 125°C
IR
10
500
µA
I2t Rating for Fusing (t < 8.3ms) (Note 3)
I2t
510
A2s
Typical Total Capacitance (per element) (Note 4)
CT
85
pF
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Non-repetitive, for t > 1ms and < 8.3 ms.
4. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
5. Thermal resistance from junction to case per element. Unit mounted on 250 x 250 x 20mm aluminum plate heat sink.
Pb
GBJ25005 - GBJ2510
Document number: DS21221 Rev. 9 - 2
2 of 4
www.diodes.com
January 2018
© Diodes Incorporated
GBJ25005 - GBJ2510
0
5
10
15
20
25
30
25 50 75 100 125 150
I , AVERAGE RECTIFIED CURRENT (A)
O
T , CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
C
Resistive or
Inductive load
with heatsink
without heatsink
0.01
0.1
1.0
10
0 0.8 1.6
I , INSTANTANEOUS FORWARD CURRENT (A)
F
2.0
100 T = 25°C
j
1.2
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics (per element)
F
0.4
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Maximum Non-Repetitive Surge Current
T = 25°C
j
Single half-sine-wave
0
100
200
300
400
1
100
1,000
1.0 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance, Per Element
R
10
0.1
1.0
10
100
1,000
020 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
GBJ25005 - GBJ2510
Document number: DS21221 Rev. 9 - 2
3 of 4
www.diodes.com
January 2018
© Diodes Incorporated
GBJ25005 - GBJ2510
Ordering Information (Note 6)
Part Number
Case
Packaging
GBJ25005-F
GBJ
15/Tube
GBJ2501-F
GBJ
15/Tube
GBJ2502-F
GBJ
15/Tube
GBJ2504-F
GBJ
15/Tube
GBJ2506-F
GBJ
15/Tube
GBJ2508-F
GBJ
15/Tube
GBJ2510-F
GBJ
15/Tube
Note: 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
GBJ
GBJ
Dim
Min
Max
A
29.70
30.30
B
19.70
20.30
C
17.00
18.00
D
3.80
4.20
E
7.30
7.70
G
9.80
10.20
H
2.00
2.40
I
0.90
1.10
J
2.30
2.70
K
3.0 x 45
L
4.40
4.80
M
3.40
3.80
N
3.10
3.40
P
2.50
2.90
R
0.60
0.80
S
10.80
11.20
All Dimensions in mm
Note: For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance.
_B
C
D
E EG
H
K
J
I
L
M
N
P
R
S
A
GBJ25005 - GBJ2510
Document number: DS21221 Rev. 9 - 2
4 of 4
www.diodes.com
January 2018
© Diodes Incorporated
GBJ25005 - GBJ2510
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2017, Diodes Incorporated
www.diodes.com
