22RIA120MS90 - Vishay Presicion Group

Document Number: 93700 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 19-Sep-08 1

Medium Power Thyristors

(Stud Version), 22 A

22RIA Series

Vishay High Power Products

FEATURES

• Improved glass passivation for high reliability

and exceptional stability at high temperature

• High dI/dt and dV/dt capabilities

• Standard package

• Low thermal resistance

• Metric threads version available

• Types up to 1200 V VDRM/VRRM

• RoHS compliant

• Designed and qualified for industrial and consumer level

TYPICAL APPLICATIONS

• Medium power switching

• Phase control applications

• Can be supplied to meet stringent military, aerospace and

other high reliability requirements

PRODUCT SUMMARY

IT(AV) 22 A

TO-208AA (TO-48)

RoHS

COMPLIANT

MAJOR RATINGS AND CHARACTERISTICS

PARAMETER TEST CONDITIONS VALUES UNITS

IT(AV)

22 A

TC85 °C

IT(RMS) 35 A

ITSM

50 Hz 400

60 Hz 420

I2t

50 Hz 793

A2s

60 Hz 724

VDRM/VRRM 100 to 1200 V

tqTypical 110 µs

TJ- 65 to 125 °C

www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93700

2Revision: 19-Sep-08

22RIA Series

Vishay High Power Products Medium Power Thyristors

(Stud Version), 22 A

ELECTRICAL SPECIFICATIONS

Notes

(1) Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20 A/µs

(2) For voltage pulses with tp ≤ 5 ms

VOLTAGE RATINGS

TYPE

NUMBER

VOLTAGE

CODE

VDRM/VRRM, MAXIMUM REPETITIVE PEAK

AND OFF-STATE VOLTAGE (1)

VRSM, MAXIMUM NON-REPETITIVE

PEAK VOLTAGE (2)

IDRM/IRRM MAXIMUM

AT TJ = TJ MAXIMUM

22RIA

10 100 150 20

20 200 300

40 400 500

60 600 700

80 800 900

100 1000 1100

120 1200 1300

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum average on-state current

at case temperature IT(AV) 180° sinusoidal conduction 22 A

85 °C

Maximum RMS on-state current IT(RMS) 35 A

Maximum peak, one-cycle

non-repetitive surge current ITSM

t = 10 ms No voltage

reapplied

Sinusoidal

half wave,

initial TJ =

TJ maximum

400

t = 8.3 ms 420

t = 10 ms 100 % VRRM

reapplied

335

t = 8.3 ms 355

Maximum I2t for fusing I2t

t = 10 ms No voltage

reapplied

793

A2s

t = 8.3 ms 724

t = 10 ms 100 % VRRM

reapplied

560

t = 8.3 ms 515

Maximum I2√t for fusing I2√tt = 0.1 to 10 ms, no voltage reapplied,

TJ = TJ maximum 7930 A2√s

Low level value of threshold voltage VT(TO)1

(16.7 % x π x IT(AV) < I < π x IT(AV)),

TJ = TJ maximum 0.83 V

High level value of threshold voltage VT(TO)2 (I > π x IT(AV)), TJ = TJ maximum 0.95

Low level value of

on-state slope resistance rt1

(16.7 % x π x IT(AV) < I < π x IT(AV)),

TJ = TJ maximum 14.9

mΩ

High level value of

on-state slope resistance rt2 (I > π x IT(AV)), TJ = TJ maximum 13.4

Maximum on-state voltage VTM Ipk = 70 A, TJ = 25 °C 1.70 V

Maximum holding current IHTJ = 25 °C, anode supply 6 V, resistive load 130 mA

Latching current IL200

Document Number: 93700 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 19-Sep-08 3

22RIA Series

Medium Power Thyristors

(Stud Version), 22 A Vishay High Power Products

Note

•t

q = 10 µs up to 600 V, tq = 30 µs up to 1600 V available on special request

Note

(1) Available with: dV/dt = 1000 V/µs, to complete code add S90 i.e. 22RIA120S90

SWITCHING

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum rate of rise

of turned-on current

VDRM ≤ 600 V

dI/dt

TJ = TJ maximum, VDM = Rated VDRM

Gate pulse = 20 V, 15 Ω, tp = 6 µs, tr = 0.1 µs maximum

ITM = (2 x rated dI/dt) A

200

A/µs

VDRM ≤ 800 V 180

VDRM ≤ 1000 V 160

VDRM ≤ 1600 V 150

Typical turn-on time tgt

TJ = 25 °C,

at rated VDRM/VRRM, TJ = 125 °C 0.9

µs

Typical reverse recovery time trr

TJ = TJ maximum,

ITM = IT(AV), tp > 200 µs, dI/dt = - 10 A/µs 4

Typical turn-off time tq

TJ = TJ maximum, ITM = IT(AV), tp > 200 µs, VR = 100 V,

dI/dt = - 10 A/µs, dV/dt = 20 V/µs linear to 67 % VDRM,

gate bias 0 V to 100 W

110

BLOCKING

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum critical rate of rise

of off-state voltage dV/dt TJ = TJ maximum linear to 100 % rated VDRM 100 V/µs

TJ = TJ maximum linear to 67 % rated VDRM 300 (1)

TRIGGERING

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum peak gate power PGM TJ = TJ maximum 8.0 W

Maximum average gate power PG(AV) 2.0

Maximum peak positive gate current IGM TJ = TJ maximum 1.5 A

Maximum peak negative gate voltage -VGM TJ = TJ maximum 10 V

DC gate current required to trigger IGT

TJ = - 65 °C Maximum required gate trigger

current/voltage are the lowest

value which will trigger all units

6 V anode to cathode applied

mATJ = 25 °C 60

TJ = 125 °C 35

DC gate voltage required to trigger VGT

TJ = - 65 °C 3.0

TJ = 25 °C 2.0

TJ = 125 °C 1.0

DC gate current not to trigger IGD TJ = TJ maximum, VDRM = Rated value 2.0 mA

DC gate voltage not to trigger VGD

TJ = TJ maximum,

VDRM = Rated value

Maximum gate current/voltage

not to trigger is the maximum

value which will not trigger any

unit with rated VDRM anode to

cathode applied

0.2 V

www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93700

4Revision: 19-Sep-08

22RIA Series

Vishay High Power Products Medium Power Thyristors

(Stud Version), 22 A

Note

• The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC

Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics

THERMAL AND MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum operating junction

and storage temperature range TJ, TStg - 65 to 125 °C

Maximum thermal resistance,

junction to case RthJC DC operation 0.86

K/W

Maximum thermal resistance,

case to heatsink RthCS Mounting surface, smooth, flat and greased 0.35

TO NUT TO DEVICE

Mounting torque Lubricated threads

(Non-lubricated threads)

20 (27.5) 25 lbf ⋅ in

0.23 (0.32) 0.29 kgf · m

2.3 (3.1) 2.8 N · m

Approximate weight 14 g

0.49 oz.

Case style See dimensions - link at the end of datasheet TO-208AA (TO-48)

ΔRthJC CONDUCTION

CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS

180° 0.21 0.15

TJ = TJ maximum K/W

120° 0.25 0.25

90° 0.31 0.34

60° 0.45 0.47

30° 0.76 0.76

100

110

120

130

0 5 10 15 20 25

30°

60° 90°

120°

180°

Average On-state Current (A)

Maximum Allowabl e Case Temperature (°C)

Conduction Angle

22RIA Series

R (DC) = 0.86 K/W

thJC

100

110

120

130

0 10203040

30°

60°

90°

120°

180°

Average On-state Current (A)

Maximum Allowable Case Temperature (°C)

Conduction Period

22RIA Series

R (DC) = 0.86 K/W

thJC

Document Number: 93700 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 19-Sep-08 5

22RIA Series

Medium Power Thyristors

(Stud Version), 22 A Vishay High Power Products

Fig. 3 - On-State Power Loss Characteristics

Fig. 4 - On-State Power Loss Characteristics

Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current

0255075100125

Maxi mum All owable Ambient Temperature (°C)

R=1K/W-DeltaR

thSA

3K/W

7K/W

10K/W

0 5 10 15 20 25

RMS Limit

Conduction Angle

180°

120°

90°

60°

30°

Maximum Average On-state Power Loss (W)

Average On-state Current (A)

22RIA Series

T = 125°C

0255075100125

Maximum Allowable Ambient Temperature (°C)

10K/W

4K/W

2K/W

R=1K/W-DeltaR

thSA

0 5 10 15 20 25 30 35

180°

120°

90°

60°

30°

RMS Limit

Conduction Period

Maximum Average On-state Power Loss (W)

Average On-state Current (A)

22RIA Series

T = 125°C

150

175

200

225

250

275

300

325

350

375

110100

Number Of Equal Amplitude Half Cycle Current Pulses (N)

Peak Half Sine Wave On-state Current (A)

22RIA Series

Initial T = 125°C

@ 60 Hz 0.0083 s

@ 50 Hz 0.0100 s

At Any Rated Load Condition And With

Rated V Applied Following Surge.

RRM

150

175

200

225

250

275

300

325

350

375

400

0.01 0.1 1

Peak Half Sine Wave On-state Current (A)

Pulse Train Duration (s)

Maximum Non Repetitive Surge Current

Versus Pulse Train Duration. Control

Of Conduction May Not Be Maintained.

Initial T = 125°C

No Voltage Reapplied

Rated V Reapplied

RRM

22RIA Series

www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93700

6Revision: 19-Sep-08

22RIA Series

Vishay High Power Products Medium Power Thyristors

(Stud Version), 22 A

Fig. 7 - Forward Voltage Drop Characteristics

Fig. 8 - Thermal Impedance ZthJC Characteristics

Fig. 9 - Gate Characteristics

100

1000

0.511.522.53

T = 25°C

Instantaneous On-state Current (A)

Instantaneous On-state Voltage (V)

T = 125°C

22RIA Series

0.01

0.1

0.001 0.01 0.1 1 10

Square Wave Pulse Duration (s)

22RIA Series

thJC

Transient Thermal Impedance Z (K/W)

Steady State Value

R = 0.86 K/W

(DC Operation)

thJC

0.1

100

0.001 0.01 0.1 1 10 100

VGD

IGD

(b)

(a)

(1) (2)

Instantaneous Gate Current (A)

Instantaneous Gate Voltage (V)

a) Recommended load line for

b) Recommended load line for

Rectangular gate pulse

tr<=1 µs, tp >= 6 µs

rated di/dt : 10V, 20ohms

<=30% rated di/dt : 10V, 65ohms

(1) PGM = 16W, tp = 4ms

(2) PGM = 30W, tp = 2ms

(3) PGM = 60W, tp = 1ms

(4) PGM = 60W, tp = 1ms

tr <=0.5 µs, tp >= 6 µs

(3) (4)

Tj = -65 °C

Tj = 25 °C

Tj = 125 °C

22RIA Series Frequency Limited by PG(AV)

Document Number: 93700 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 19-Sep-08 7

22RIA Series

Medium Power Thyristors

(Stud Version), 22 A Vishay High Power Products

ORDERING INFORMATION TABLE

1- Current code

3- Voltage code x 10 = VRRM (see Voltage Ratings table)

4- None = Stud base TO-208AA (TO-48) 1/4" 28UNF-2A

M = Stud base TO-208AA (TO-48) M6 x 1

5- Critical dV/dt:

None = 300 V/µs (standard value)

S90 = 1000 V/µs (special selection)

2- Essential part number

Device code

51324

22 RIA 120 M S90

LINKS TO RELATED DOCUMENTS

Dimensions http://www.vishay.com/doc?95333

Document Number: 95333 For technical questions, contact: indmodules@vishay.com www.vishay.com

Revision: 07-Jul-08 1

TO-208AA (TO-48)

Outline Dimensions

Vishay Semiconductors

DIMENSIONS in millimeters (inches)

1/4"-28UNF-2A

For metric device M6 x 1

45°

Ø 3.9/4.1

(Ø 0.15/0.16)

Ø 15.5

(Ø 0.61)

Ø 1.7/1.8

(Ø 0.06/0.07)

12.8 MAX.

(0.5 MAX.)

22.2 MAX.

(0.87 MAX.)

30.2 MAX.

(0.18 MAX.)

3.1/3.3

(0.12/0.13)

1.24/1.44

(0.04/0.05)

10.7/11.5

(0.42/0.45)

Across flats

13.8/14.3

(0.54/0.56)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.