3MTM Shrunk Delta Ribbon (SDR) Connectors .80 mm Boardmount, Through-Hole, Vertical Receptacle, Shielded 122 Series * Wiper on wiper contact for reliable repetitive mating * Ground lock for reliable PCB retention * Full metal face for better EMI shielding effectiveness * Contacts: 14, 26 * On-board jacksockets maintains a secure connection * See regulatory information appendix (RIA) for chemical compliance information Date Modified: December 12, 2007 TS-2126-C Sheet 1 of 3 Physical Insulation Material: High-Temperature Nylon Flammability: Color: Contact Material: Plating Underplating: Wiping Area: Termination Area: Shroud & Latch Hook Material: Plating: Ground Lock Material: Plating: Lock Screw Material: Plating: Alignment Plate Material: Marking: UL 94V-0 Black Copper Alloy 80 [ 2 m ] Nickel 30 [ 0.76 m ] Gold 80 [ 2 m ] Tin Steel Nickel Copper Alloy Tin Steel Nickel PPS 3M logo and part number Electrical 0.5 A Insulation Resistance: 500 M min at @250 VDC Withstanding Voltage: 350 VAC for 1 minute Current Rating: Environmental Temperature Rating: -40C to +70C Process Rating: up to +235C, Dip 5 0.5 secs (220C, 40 sec 0.5) UL File No.: E68080 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Shrunk Delta Ribbon (SDR) Connectors .80 mm Boardmount, Through-Hole, Vertical Receptacle, Shielded .039 0.98 DIM. "E" .077 1.96 DIM. "D" DIM. "B" .01 0.3 2X .03 0.8 TYP. .09 2.3 GROUND LOCK .22 5.5 2X GROUND LOCK .045 1.15 .117 2.97 .090 .006 2.28 0.15 TAIL 3M 122XX .24 6.0 122 Series In c h [m m ] T o le ra n c e U n le s s N o te d DIM. "C" .005 in c h .0 .0 0 .1 .0 1 .0 0 5 .0 0 0 [ ] D im e n s io n s fo r R e fe re n c e O n ly DIM. "A" POS. 2 DIM. "F" .005 2X M2 X 0.4 POS. 1 DIM. "B" .30 7.5 .138 3.50 .23 5.8 .20 5.0 .10 2.5 SCREW LOCK M2 X 0.4 LAST POSITION POSITION 14 26 DIM. "A" .79 [20.0] .98 [24.8] 15 DIM. "B" .19 [4.8] .38 [9.6] DIM. "C" .35 [8.8] .54 [13.6] DIM. "D" .30 [7.5] .48 [12.3] DIM. "E" .356 [9.05] .545 [13.85] DIM. "F" .57 [14.4] .76 [19.2] DIM. "G" .08 [2.13] .08 [2.13] Connector Dimension Table Table 1 Note 1: For various panel thickness jackscrews refer to TS-0142. Ordering Information 122XX-1150-00FR (RIA E1 & C1 apply) Contact Quantity: see (table 1) TS-2126-C Sheet 2 of 3 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Shrunk Delta Ribbon (SDR) Connectors .80 mm Boardmount, Through-Hole, Vertical Receptacle, Shielded 122 Series .002 O .039 1.00 0.05 PAD DIM. "E" .002 N/2 .002 O .026 0.65 0.05 .026 .002 THRU HOLE O 0.65 0.05 THRU .079 HOLE 2X O PAD, MAX. 2.00 .079 2X O PAD, MAX. 2.00.047 .003 2X O 1.20 0.08 .047 .003 THRU 2X O HOLE 1.20 0.08 THRU HOLE N/2-1 .069 .003 O 1.75 0.08 .069 .003 O POSITION (N) LAST 1.75 0.08 N-1 LAST POSITION .031 .001 0.80 .031 0.03 .001 TYP. 0.80 0.03 TYP. DIM. DIM."E" "B".002 .002 POS. 1 DIM. "B" .002 2X DIM "G" .002 POS. 1 POS. 2 POS. 2 .039 .001 0.98 0.03 .039 .001 0.98 0.03 .077 .001 1.96 0.03 .077 .001 1.96 0.03 .091 2.32 Ground Lock .117 .001 2.98 0.03 .117 .001 2.98 0.03 .045 .001 2X 1.15 0.03 .045 .001 2X 1.15 0.03 N/2+1 DIM. "D" .002 DIM. "D" .002 N/2+2 RECOMMENDED PC BOARD LAYOUT RECOMMENDED PC BOARD LAYOUT N= TOTAL NUMBER OF POSITIONS DIM. "Y" .004 2X R .205 .004 5.20 0.10 DIM. "X" .004 .043 1.10 Recommended panel cut-out POSITION 14 26 DIM. "X" .41 [10.5] .60 [15.3] DIM. "Y" .57 [14.4] .76 [19.2] Panel Cut-Out Dimension Table Table 2 TS-2126-C Sheet 3 of 3 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-c Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-c Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2007. All rights reserved. RIA-2217A-c 3M is a trademark of 3M Company.