MINI-MELF-SMD Applications LL4150 or LL4150-1 Silicon Diode Switching Used in general purpose applications, where a low current controlled forward characteristic and fast switching speed are important. BKC can produce generic equivalents to JAN/ TX/ TXV and S level per MIL-S-19500/ 231 with internal source control drawings. LL-34/35 MINI MELF Features Surface Mount Package DO-213AA Six sigma quality Metallurgically bonded BKC's Sigma BondTM plating for problem free solderability Available in DO-35 package Both End Caps 0.10"REF 2.54 mmREF 0.016-.022" 0.41-0.55 mm Length Dia. 0.13-0.146" 3.30-3.70 mm .063-.067" 1.6-1.7mm Maximum Ratings Peak Inverse Voltage Average Rectified Current Continuous Forward Current Peak Surge Current (tpeak = 1 sec.) BKC Power Dissipation TL=50 oC, L = 3/8" from body Operating Temperature Range Symbol PIV IAvg IFdc Ipeak Ptot TOp Storage Temperature Range Value 75 (Min.) 200 400 0.5 500 -65 to +200 TSt o Electrical Characteristics @ 25 C Symbol Minimum -65 to +200 Maximum Unit Volts mAmps mAmps Amp mWatts o C o C Unit Forward Voltage Drop @ IF = 1.0 mA Forward Voltage Drop @ IF = 10 mA Forward Voltage Drop @ IF = 50 mA VF VF VF 0.54 0.66 0.76 0.62 0.74 0.86 Volts Volts Volts Forward Voltage Drop @ IF = 100 m Forward Voltage Drop @ IF = 200 mA Reverse Leakage Current @ VR = 50 V Breakdown Voltage @ Ir = 0.1 mA Capacitance @ VR = 0 V, f = 1mHz Reverse Recovery time (note 1) Reverse Recovery time (note 2,3) Forward Recovery time (note 4) VF VF IR PIV CT trr trr Vfr 0.80 0.87 0.92 1.0 0.1 (100 @ 150 oC) Volts Volts A Volts pF nSecs nSecs nSecs 75 Note 1: Per Method 4031-A with IF = IR = 10 to 200 mA, RL = 100 Ohms,recover to 0.1 If. Note 2: Per Method 4031-A with IF = IR = 200 to 400 mA, RL = 100 Ohms,recover to 0.1 If. Note 3: Per Method 4031-A with IF = 10 microA, Ir = 1.0 mA, recover to 0.1 mA. Note 4: Per Method 4026 with IF = 200 mA, Ir = 1.0 mA, recover to 0.1 mA. 6 Lake Street - Lawrence, MA 01841 Tel: 978-681-0392 - Fax: 978-681-9135 2.5 4.0 6.0 10