2005. 6. 1 1/2Revision No : 0
FEATURES
·Plastic package has Underwriters Laboratory flammability
Classification 94V-0.
·Glass passivated chip junction.
·High surge overload rating : 35A peak.
·Saves space on printed circuit boards.
·High temperature soldering guaranteed : 260℃/10 seconds.
MAXIMUM RATING (Ta=25℃)
SEMICONDUCTOR
TECHNICAL DATA
MB6S
Single-Phase Bridge Rectifiers
ELECTRICAL CHARACTERISTICS (Ta=25℃)
CHARACTERISTIC SYMBOL RATING UNIT
repetitive peak reverse voltage VRRM 600 V
RMS voltage VRMS 420 V
DC blocking voltage VDC 600 V
Average forward output rectified
current (see Fig.1) On glass-epoxy
P.C.B on aluminum substrate.
IF(AV)
0.5 (Note1)
0.8 (Note2) A
Peak forward surge current IFSM 35.0 A
Rating for fusing (t<8.3ms) I2t 5.0 A2sec
Operating Junction and
Storage Temperature Range Tj, Tstg -55~150 ℃
CHARACTERISTIC SYMBOL CONDITION MIN TYP MAX UNIT
Forward voltage VFIF=0.4A - - 1.0 V
Leakage current Ta=25℃IRVR=600V - - 5.0 μA
Ta=125℃- - 100
Junction capacitance CJVR=4.0V, f=1.0MHz - 13 - pF
Typical thermal resistance
Rth(A)
(Note1) Junction to ambient - -
85
℃/W
Rth(A)
(Note2) 70
Rth(L)
(Note1) Junction to lead - - 20
Note 1) on glass epoxy P.C.B mounted on 0.05×0.05󱄦(1.3×1.3mm) Pads.
Note 2) on aluminum substrate P.C.B with an area of 0.8×0.8󱄦(20×20mm) mounted on 0.05×0.05󱄦(1.3×1.3mm) solder pad.