TLP521-1,TLP521-2,TLP521-4 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP521-1,TLP521-2,TLP521-4 Programmable Controllers AC/DC-Input Module Solid State Relay Unit in mm The TOSHIBA TLP521-1, -2 and -4 consist of a photo-transistor optically coupled to a gallium arsenide infrared emitting diode. The TLP521-2 offers two isolated channels in an eight lead plastic DIP package, while the TLP521-4 provides four isolated channels in a sixteen plastic DIP package. * Collector-emitter voltage: 55 V (min) * Current transfer ratio: 50% (min) TOSHIBA 11-5B2 Weight: 0.26 g (typ.) Rank GB: 100% (min) * Isolation voltage: 2500 Vrms (min) * UL recognized made in Japan: UL1577, file No. E67349 made in Thailand: UL1577, file No. E152349 Pin Configurations (top view) TLP521-2 TLP521-1 TLP521-4 1 4 1 8 1 16 2 3 2 7 2 15 3 6 3 14 4 5 4 13 5 12 6 11 7 10 8 9 TOSHIBA 11-10C4 Weight: 0.54 g (typ.) 1 : Anode 2 : Cathode 3 : Emitter 4 : Collector 1, 3 : Anode 2, 4 : Cathode 5, 7 : Emitter 6, 8 : Collector : Anode 1, 3, 5, 7 : Cathode 2, 4, 6, 8 9, 11, 13, 15 : Emitter 10, 12, 14, 16 : Collector 1 TOSHIBA 11-20A3 Weight: 1.1 g (typ.) 2007-10-01 TLP521-1,TLP521-2,TLP521-4 Absolute Maximum Ratings (Ta = 25C) Rating Characteristic Forward current Detector LED Forward current derating Symbol TLP521-1 TLP521-2 TLP521-4 Unit IF 70 50 mA IF /C -0.93 (Ta 50C) -0.5 (Ta 25C) mA /C Pulse forward current IFP 1 (100 pulse, 100pps) A Reverse voltage VR 5 V Junction temperature Tj 125 C Collector-emitter voltage VCEO 55 V Emitter-collector voltage VECO 7 V Collector current IC 50 mA Collector power dissipation (1 circuit) PC 150 100 mW PC /C -1.5 -1.0 mW /C Collector power dissipation derating (1 circuit Ta 25C) Junction temperature Tj 125 C Storage temperature range Tstg -55~125 C Operating temperature range Topr -55~100 C Lead soldering temperature Tsol 260 (10 s) C Total package power dissipation PT 250 150 mW Total package power dissipation derating (Ta 25C) PT /C -2.5 -1.5 mW /C Isolation voltage BVS 2500 (AC, 1min., R.H. 60%) (Note 1) Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min Supply voltage VCC Forward current IF Collector current Operating temperature Typ. Max Unit 5 24 V 16 25 mA IC 1 10 mA Topr -25 85 C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP521-1,TLP521-2,TLP521-4 Type TLP521 TLP521-2 TLP521-4 Classi- fication (*1) Current Transfer Ratio (%) (IC / IF) IF = 5mA, VCE = 5V, Ta = 25C Marking Of Classification Min Max A 50 600 Blank, Y, Y , G, G , B, B , GB Rank Y 50 150 Y, Y Rank GR 100 300 G, G Rank BL 200 600 B, B Rank GB 100 600 G, G , B, B , GB A 50 600 Blank, GR, BL, GB Rank GB 100 600 GR, BL, GB *1: Ex. rank GB: TLP521-1 (GB) (Note): Application type name for certification test, please use standard product type name, i.e. TLP521-1 (GB): TLP521-1, TLP521-2 (GB): TLP521-2 3 2007-10-01 TLP521-1,TLP521-2,TLP521-4 Individual Electrical Characteristics (Ta = 25C) Detector LED Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V -- -- 10 A Capacitance CT V = 0, f = 1 MHz -- 30 -- pF Collector-emitter breakdown voltage V(BR) CEO IC = 0.5 mA 55 -- -- V Emitter-collector breakdown voltage V(BR) ECO IE = 0.1 mA 7 -- -- V VCE = 24 V -- 10 100 nA VCE = 24 V, Ta = 85C -- 2 50 A V = 0, f = 1 MHz -- 10 -- pF MIn Typ. Max Unit 50 -- 600 100 -- 600 Collector dark current ICEO Capacitance (collector to emitter) CCE Coupled Electrical Characteristics (Ta = 25C) Characteristic Current transfer ratio Saturated CTR Collector-emitter saturation voltage Symbol IC / IF IC / IF (sat) VCE (sat) Test Condition IF = 5 mA, VCE = 5 V Rank GB % IF = 1 mA, VCE = 0.4 V Rank GB -- 60 -- 30 -- -- IC = 2.4 mA, IF = 8 mA -- -- 0.4 IC = 0.2 mA, IF = 1 mA Rank GB -- 0.2 -- -- -- 0.4 Min Typ. Max Unit -- pF -- % V Isolation Characteristics (Ta = 25C) Characteristic Symbol Test Condition Capacitance (input to output) CS VS = 0, f = 1 MHz -- 0.8 Isolation resistance RS VS = 500 V, R.H. 60% -- 10 AC, 1 minute Isolation voltage BVS 11 2500 -- -- AC, 1 second, in oil -- 5000 -- DC, 1 minute, in oil -- 5000 -- 4 Vrms Vdc 2007-10-01 TLP521-1,TLP521-2,TLP521-4 Switching Characteristics (Ta = 25C) Characteristic Symbol Rise time Test Condition Min Typ. Max -- 2 -- -- 3 -- -- 3 -- tr Fall time tf Turn-on time ton VCC = 10 V IC = 2 mA RL = 100 Turn-off time toff -- 3 -- Turn-on time tON -- 2 -- -- 15 -- -- 25 -- Storage time ts Turn-off time tOFF Fig.1 : SWITCHING IF RL = 1.9 k (Fig.1) VCC = 5 V, IF = 16 mA Unit s s TIME TEST CIRCUIT IF RL VCC tS VCE 5 VCE 4.5V 0.5V tON tOFF VCC 2007-10-01 TLP521-1,TLP521-2,TLP521-4 IF - Ta 100 80 80 Allowable forward current IF (mA) Allowable forward current IF (mA) TLP521-1 100 60 40 20 0 -20 0 20 40 60 40 20 0 Ambient temperature Ta (C) 240 120 Allowable collector power dissipation PC (mW) 160 120 80 60 80 100 TLP521-2 TLP521-4 80 100 PC - Ta 80 60 40 20 40 0 -20 0 20 40 60 80 0 -20 100 0 IFP - DR TLP521-1 3000 20 3000 Pulse width 100s TLP521-2 TLP521-4 Pulse width 100s Ta = 25C Allowable pulse forward current IFP (mA) 1000 500 300 100 50 30 10-3 3 10-2 3 Duty cycle ratio 60 IFP - DR Ta = 25C 10 3 40 Ambient temperature Ta (C) Ambient temperature Ta (C) Allowable pulse forward current IFP (mA) 40 100 200 Allowable collector power dissipation PC (mW) 20 Ambient temperature Ta (C) PC - Ta TLP521-1 IF - Ta 60 0 -20 100 80 TLP521-2 TLP521-4 10-1 3 1000 500 300 100 50 30 10 3 100 DR 10-3 3 10-2 3 Duty cycle ratio 6 10-1 3 100 DR 2007-10-01 TLP521-1,TLP521-2,TLP521-4 100 VF/Ta IF - VF Ta=25C Forward voltage temperature coefficient VF/Ta (mV/C) Forward current IF (mA) 30 10 5 3 1 0.5 0.1 0.4 0.8 0.6 1.0 1.4 1.2 Forward voltage VF -2.0 -1.6 -1.2 -0.4 0.1 1.6 0.3 (V) 1 10 Collector dark current ICEO (A) 500 Repetitive frequency =100Hz 300 Ta = 25C 100 50 30 10 5 3 10 10 10 10 10 0.8 1.2 1.6 Pulse forward voltage 2.0 0 -1 -2 -3 -4 2.4 0 80 40 VFP (V) (mA) 50mA Collector current IC (mA) Collector current IC () IC - VCE 60 30mA 20mA 15mA PC(MAX.) 10mA 20 IF=5mA 4 160 120 Ambient temperature Ta 50mA 25 2 10V 5V VCE=24V Ta=25C 0 (mA) IF 1 IC - VCE 80 40 30 10 ICEO - Ta Pulse width 10s 0.4 3 Forward current IFP - VFP 1000 Pulse forward current IFP (mA) -2.4 -0.8 0.3 0 IF -2.8 50 1 0 - 6 Collector-emitter voltage 8 20 20mA 15 10mA 10 5mA 5 0 0 10 VCE (V) 40mA 30mA IF=2mA 0.2 0.4 0.6 0.8 Collector-emitter voltage 7 Ta=25C 1.0 1.2 1.4 VCE (V) 2007-10-01 TLP521-1,TLP521-2,TLP521-4 IC - IF 100 300 Current transfer ratio IC /IF (%) Collector current IC (mA) 30 10 Sample IC/IF - IF 500 Ta = 25C VCE=5V 50 VCE=0.4V A 5 3 Sample B Sample A 100 Sample B 50 30 Ta = 25C VCE=5V VCE=0.4V 10 5 0.3 1 1 3 10 30 Forward current IF 0.5 100 (mA) 0.3 VCE(sat) - Ta 0.20 Collector-emitter saturation voltage VCE(sat) (V) 0.1 0.05 0.03 0.3 3 1 10 Forward current IF 30 100 (mA) IF = 5mA IC = 1mA 0.16 0.12 0.08 0.04 0 -20 0 IC - Ta 1000 500 10mA 5 3 1mA IF = 0.5mA 100 tS 50 30 10 5 0.3 0.1 3 -20 0 20 100 tOFF 10 Switching time (s) Collector current IC (mA) 300 80 Ta = 25C IF = 16mA VCC= 5V 5mA 0.5 60 Ta () RL - Switching Time VCE = 5V 25mA 50 1 40 Ambient temperature 100 30 20 40 Ambient temperature 60 80 1 1 100 tON 3 10 30 100 300 Load resistance RL (k) Ta () 8 2007-10-01 TLP521-1,TLP521-2,TLP521-4 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 9 2007-10-01