IRFD014, SiHFD014 Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) * Dynamic dV/dt Rating 60 RDS(on) () VGS = 10 V * For Automatic Insertion 0.20 Available RoHS* Qg (Max.) (nC) 11 * End Stackable Qgs (nC) 3.1 * 175 C Operating Temperature 5.8 * Fast Switching Qgd (nC) Configuration Single COMPLIANT * Ease of Paralleling * Simple Drive Requirements * Compliant to RoHS Directive 2002/95/EC D HVMDIP DESCRIPTION Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The 4 pin DIP package is a low cost machine-insertable case style which can be stacked in multiple combinations on standard 0.1" pin centers. The dual drain serves as a thermal link to the mounting surface for power dissipation levels up to 1 W. G S G D S N-Channel MOSFET ORDERING INFORMATION Package HVMDIP IRFD014PbF SiHFD014-E3 IRFD014 SiHFD014 Lead (Pb)-free SnPb ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 60 Gate-Source Voltage VGS 20 Continuous Drain Current Pulsed Drain VGS at 10 V TA = 25 C TA = 100 C Currenta ID IDM Linear Derating Factor Single Pulse Avalanche Energyb Maximum Power Dissipation EAS TA = 25 C Peak Diode Recovery dV/dtc Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) for 10 s UNIT V 1.7 1.2 A 14 0.0083 W/C 130 mJ PD 1.3 W dV/dt 4.5 V/ns TJ, Tstg - 55 to + 175 300d C Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = 25 V, starting TJ = 25 C, L = 52 mH, Rg = 25 , IAS = 1.7 A (see fig. 12). c. ISD 10 A, dI/dt 90 A/s, VDD VDS, TJ 175 C. d. 1.6 mm from case. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 www.vishay.com 1 IRFD014, SiHFD014 Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER Maximum Junction-to-Ambient SYMBOL TYP. MAX. UNIT RthJA - 120 C/W SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = 250 A 60 - - V VDS/TJ Reference to 25 C, ID = 1 mA - 0.063 - V/C Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) VDS = VGS, ID = 250 A 2.0 - 4.0 V Gate-Source Leakage IGSS VGS = 20 V - - 100 nA Zero Gate Voltage Drain Current IDSS Gate-Source Threshold Voltage Drain-Source On-State Resistance Forward Transconductance RDS(on) gfs VDS = 60 V, VGS = 0 V - - 25 VDS = 48 V, VGS = 0 V, TJ = 150 C - - 250 ID = 1.0 Ab VGS = 10 V VDS = 25 V, ID = 1.0 Ab A - - 0.20 0.96 - - S - 310 - Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5 - 160 - - 37 - - - 11 - - 3.1 Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd - - 5.8 Turn-On Delay Time td(on) - 10 - tr - 50 - - 13 - - 19 - - 4.0 - Rise Time Turn-Off Delay Time td(off) Fall Time tf Internal Drain Inductance LD Internal Source Inductance LS VGS = 10 V ID = 10 A, VDS = 48 V see fig. 6 and 13b VDD = 30 V, ID = 10 A Rg = 24 , RD = 2.7 , see fig. 10b Between lead, 6 mm (0.25") from package and center of die contact D pF nC ns nH G - 6.0 - - - 1.7 - - 14 S Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Currenta ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton MOSFET symbol showing the integral reverse p - n junction diode D A G S TJ = 25 C, IS = 1.7 A, VGS = 0 Vb TJ = 25 C, IF = 10 A, dI/dt = 100 A/sb - - 1.6 V - 70 140 ns - 0.20 0.40 C Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 s; duty cycle 2 %. www.vishay.com 2 Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 IRFD014, SiHFD014 Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) TA = 25 C Fig. 1 - Typical Output Characteristics, TA = 25 C Fig. 3 - Typical Transfer Characteristics TA = 175 C Fig. 2 - Typical Output Characteristics, TA = 175 C Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 IRFD014, SiHFD014 Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 7 - Typical Source-Drain Diode Forward Voltage TA = 25 C TJ = 175 C SINGLE PULSE Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 Fig. 8 - Maximum Safe Operating Area Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 IRFD014, SiHFD014 Vishay Siliconix RD VDS VGS D.U.T. ID, Drain Current (A) Rg + - VDD 10 V Pulse width 1 s Duty factor 0.1 % Fig. 10a - Switching Time Test Circuit VDS 90 % 10 % VGS TA, Ambient Temperature (C) td(on) td(off) tf Fig. 10b - Switching Time Waveforms Thermal Response (ZthJA) Fig. 9 - Maximum Drain Current vs. Ambient Temperature tr t1, Rectangular Pulse Duration (s) Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Ambient Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 www.vishay.com 5 IRFD014, SiHFD014 Vishay Siliconix L Vary tp to obtain required IAS VDS VDS tp VDD D.U.T Rg + - IAS V DD VDS 10 V 0.01 W tp Fig. 12a - Unclamped Inductive Test Circuit IAS Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 k QG 10 V 12 V 0.2 F 0.3 F QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig. 13b - Gate Charge Test Circuit Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 IRFD014, SiHFD014 Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations * Low stray inductance * Ground plane * Low leakage inductance current transformer + - - Rg * * * * + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor "D" D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 14 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91128. Document Number: 91125 S10-2466-Rev. C, 25-Oct-10 www.vishay.com 7 Package Information Vishay Siliconix HVM DIP (High voltage) 0.248 [6.29] 0.240 [6.10] 0.043 [1.09] 0.035 [0.89] 0.197 [5.00] 0.189 [4.80] 0.133 [3.37] 0.125 [3.18] 0.180 [4.57] 0.160 [4.06] 0.094 [2.38] 0.086 [2.18] A L 0.160 [4.06] 0.140 [3.56] 0 to 15 2x 0.017 [0.43] 0.013 [0.33] 0.045 [1.14] 2 x 0.035 [0.89] E min. 0.024 [0.60] 4x 0.020 [0.51] 0.100 [2.54] typ. E max. INCHES MILLIMETERS DIM. MIN. MAX. MIN. A 0.310 0.330 7.87 MAX. 8.38 E 0.300 0.425 7.62 10.79 L 0.270 0.290 6.86 7.36 ECN: X10-0386-Rev. B, 06-Sep-10 DWG: 5974 Note 1. Package length does not include mold flash, protrusions or gate burrs. Package width does not include interlead flash or protrusions. Document Number: 91361 Revision: 06-Sep-10 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000