DB LECTRO Inc. SMBJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts 600 Watts Peak Pulse Power SMBJ PART NUMBER UNIPOLAR SMBJ5.0A SMBJ6.0A SMBJ6.5A SMBJ7.0A SMBJ7.5A SMBJ8.0A SMBJ8.5A SMBJ9.0A SMBJ10A SMBJ11A SMBJ12A SMBJ13A SMBJ14A SMBJ15A SMBJ16A SMBJ17A SMBJ18A SMBJ20A SMBJ22A SMBJ24A SMBJ26A SMBJ28A SMBJ30A SMBJ33A SMBJ36A SMBJ40A SMBJ43A SMBJ45A SMBJ48A SMBJ51A SMBJ54A SMBJ58A SMBJ60A SMBJ64A SMBJ70A SMBJ75A SMBJ78A SMBJ85A SMBJ90A SMBJ100A SMBJ110A SMBJ120A SMBJ130A SMBJ150A SMBJ160A SMBJ170A BI-POLAR DEVICE MARKING CODE UNI SMBJ5.0CA KE SMBJ6.0CA KG SMBJ6.5CA KK SMBJ7.0CA KM SMBJ7.5CA KP SMBJ8.0CA KR SMBJ8.5CA KT SMBJ9.0CA KV SMBJ10CA KX SMBJ11CA KZ SMBJ12CA LE SMBJ13CA LG SMBJ14CA LK SMBJ15CA LM SMBJ16CA LP SMBJ17CA LR SMBJ18CA LT SMBJ20CA LV SMBJ22CA LX SMBJ24CA LZ SMBJ26CA ME SMBJ28CA MG SMBJ30CA MK SMBJ33CA MM SMBJ36CA MP SMBJ40CA MR SMBJ43CA MT SMBJ45CA MV SMBJ48CA MX SMBJ51CA MZ SMBJ54CA NE SMBJ58CA NG SMBJ60CA NK SMBJ64CA NM SMBJ70CA NP SMBJ75CA NR SMBJ78CA NT SMBJ85CA NV SMBJ90CA NX SMBJ100CA NZ SMBJ110CA PE SMBJ120CA PG SMBJ130CA PK SMBJ150CA PM SMBJ160CA PP SMBJ170CA PR BI AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ DE DG DK DM DP DR DT DV DX DZ EE EG EK EM EP ER REVERSE BREAKDOW BREAKDOWN TEST PEAK REVERSE MAXIMUM STAND- N VOLTAGE VOLTAGE CURRENT CLAMPING PULSE LEAKAGE OFF VBR(V) IT (mA) VOLTAGE CURRENT @ VRWM VBR(V) VOLTAGE Ipp (A) @Ipp Vc(V) IR(A) MIN.@IT MAX.@IT VRWM(V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 65.3 58.3 53.6 50.0 46.6 44.2 41.7 39.0 35.3 33.0 30.2 28.0 25.9 24.6 23.1 21.8 20.6 18.6 16.9 15.5 14.3 13.3 12.4 11.3 10.4 9.3 8.7 8.3 7.8 7.3 6.9 6.5 6.2 5.9 5.3 5.0 4.8 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 800 800 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10% DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 DB LECTRO Inc. SMBJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 600 Watt Peak Pulse Power FEATURES For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate(duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to BV for unidirectional types Typical IR less than 1mA above 10V High temperature soldering: 250C/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability 94V-O Dimensions in inches and (millimeters) MECHANICAL DATA Case JEDEC DO214AA. Molded plastic over glass passivated junction Terminal Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Color band denotes positive end (cathode) except Bidirectional Standard Packaging 12mm tape(EIA STD RS-481) Weight 0.003ounce, 0.093gram DEVICES FOR BIPOLAR APPLICATION For Bidirectional use C or CA Suffix for types SMBJ5.0 thru types SMBJ170 (e.g. SMBJ5.0C , SMBJ170CA) Electrical characteristics apply in both directions MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Minimum PPPM Peak Pulse Power Dissipation on 10/1000 s waveform (Note 1,2 ,FIG.1) Watts 600 SEE IPPM Peak Pulse Current of on 10/1000 s waveform (Note 1,FIG.3) Amps TABLE 1 Peak Forward Surge Current,8.3ms Single Half Sine-Wave IFSM Amps 100 Superimposed on Rated Load,(JEDEC Method) (Note 2,3) -55 to + TJ , TSTG Operating junction and Storage Temperature Range 150 Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 per Fig. 2 . 2 2.Mounted on 5.0mm (0.03mm thick) Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. RATING DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 DB LECTRO Inc. SMBJ SERIES RATINGS AND CHARACTERISTIC CURVES Ratings and Characteristic Curves(TA=25 unless otherwise noted) Fig. 1 - Peak Pulse Power Rating Fig.2 - Pulse Derating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% PPPM-Peak Pulse Power (kW) 100 10 1 0.2x0.2"(5.0x5.0mm) Copper Pad Areas 0.1 87.5 75 62.5 50 37.5 25 12.5 0 0.1s 1.0s 10s 100s 1.0ms 0 10ms td - Pulse Width (sec.) 50 75 100 125 150 175 200 TA - Ambient Temperature (C) Fig.4 - Typical Junction Capacitance 10000 Fig.3 - Pulse Waveform 6000 150 Measured at Zero Bias TJ = 25C tr = 10sec. CJ - Junction Capacitance(pF) IPPM - Peak Pulse Current,% IRSM 25 Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value- IPPM 2 10/1000sec.Waveform as defined by R.E.A. 50 1000 VR,Measured at Stand-Off Voltage, VWM 100 1000 td t - Time(ms) 2.0 3.0 0 1.0 0 3.0 4.0 10 1.0 4.0 TJ = 25C f = 1.0MHZ Vsig = 50mVp-p Uni-Directional Bi-Directional 10 100 200 VWM - Reverse Stand-Off Voltage (V) Fig.6 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typ.Transient Thermal Impedance 200 IFSM-Peak Forward Surge Current (A) Transient Thermal Impedance ( /W) 100 10 1.01 0.1 0.001 8.3ms Single Half Sine-Wave (JEDEC Method) Unidirectional Only 100 10 0.01 0.1 1 10 tp-Pulse Duration (sec) 100 1000 1 10 100 Number of Cycles at 60 Hz DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714