TECHNICAL DATA SHEET
ADAPTOR
RPC-2.92 PLUG – RPC-2.40 JACK 02S109-K00S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page
P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499
www.rosenberger.de email: info@rosenberger.de 1 / 2
RF_35/12.04/3.0
All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
RPC-2.92 mechanically compatible with RPC-3.50 and SMA
RPC-2.40 mechanically compatible with RPC-1.85
Documents
N/A
Material and plating
Connector parts Material Plating
Center contact Beryllium copper Gold, min. 1.27 µm, over chemical nickel
Outer contact Stainless steel Passivated
Coupling nut Stainless steel Passivated
Dielectric PS
Gasket Silicone
TECHNICAL DATA SHEET
ADAPTOR
RPC-2.92 PLUG – RPC-2.40 JACK 02S109-K00S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page
P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499
www.rosenberger.de email: info@rosenberger.de 2 / 2
RF_35/12.04/3.0
f(GHz)
Electrical data
Impedance 50 Ω
Frequency DC to 40 GHz
Return loss ≥ 28 dB, DC to 12 GHz
≥ 25 dB, 12 GHz to 26.5 GHz
≥ 20 dB, 26.5 GHz to 40 GHz
Insertion loss ≤ 0.05 x dB
Insulation resistance ≥ 5 GΩ
Center contact resistance RPC-2.92 ≤ 3.0 mΩ
Outer contact resistance RPC-2.92 ≤ 2.0 mΩ
Center contact resistance RPC-2.40 ≤ 4.0 mΩ
Outer contact resistance RPC-2.40 ≤ 2.5 mΩ
Test voltage 500 V rms
Working voltage 150 V rms
RF-leakage ≥ 100 dB up to 1 GHz
Mechanical data
Mating cycles ≥ 500
Center contact captivation ≥ 22 N
Coupling test torque RPC-2.92 1.70 Nm
Recommended torque RPC-2.92 0.80 Nm to 1.10 Nm
Coupling test torque RPC-2.40 1.65 Nm
Recommended torque RPC-2.40 0.80 Nm to 1.10 Nm
Environmental data
Temperature range -40°C to +85°C
Thermal shock MIL-STD-202, Method 107, Condition B
Corrosion MIL-STD-202, Method 101, Condition B
Vibration MIL-STD-202, Method 204, Condition D
Shock MIL-STD-202, Method 213, Condition I
Moisture resistance MIL-STD-202, Method 106
2002/95/EC (RoHS) compliant
Tooling
N/A
Suitable cables
N/A
Packing
Standard 1 pce in box
Weight 5.9 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
Herbert Babinger 16/07/04 Moder 28.01.10 d00 10-0035 M. Knoll 26/01/10
While the information has been carefully compiled to the best of our knowled
g
e, nothin
g
is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infrin
g
e existin
g
patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
