NOT the LATEST
REVISION
1206 1210
Rated Power @ 70°C: 0.125W 0.2W
Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0
Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
Tolerance (%): 0.1 0.5 1 0.1 0.5 1
Code letter: BD F BD F
Selection Series: E24 & E96 E24 & E96
Temp. Coefficient (ppm/°C): 15 25 50 15 25 50 15 25 50 15 25 50 15 25 50 15 25 50
Code Letter: DEC DECD ECDEC DECDEC
Limiting Element Voltage: 150V 150V
Max. Overload Voltage: 300V 300V
Operating Temp. Range: -55 to +155°C -55 to +155°C
Climatic Category (°C): 55/125/55 55/125/55
Insulation Resistance Dry Min: 1000MΩ 1000MΩ
Stability: 0.5% 0.5%
2010 2512
Rated Power @ 70°C: 0.25W 0.5W
Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0
Max: 1M0 3M0 1M0 3M0 1M0 3M0 1M0 3M0 1M0 3M0 1M0 3M0
Tolerance (%): 0.1 0.5 1 0.1 0.5 1
Code letter: BD F BD F
Selection Series: E24 & E96 E24 & E96
Temp. Coefficient (ppm/°C): 15 25 50 15 25 50 15 25 50 15 25 50 15 25 50 15 25 50
Code Letter: DECDECD ECDECDECD EC
Limiting Element Voltage: 150V 150V
Max. Overload Voltage: 300V 300V
Operating Temp. Range: -55 to +155°C -55 to +155°C
Climatic Category (°C): 55/125/55 55/125/55
Insulation Resistance Dry Min: 1000MΩ 1000MΩ
Stability: 0.5% 0.5%
Characteristics - Environmental
Item Requirement Test Method
Tol. ≤ 0.05% Tol. > 0.05%
Temperature Coefficient AS per TCRs specified in value range table on page 1 +25/-55/+25/+125/+25°C
of Resistance (TCR):
Short Time Overload: ∆R ±0.05% ∆R ±0.2% RCWV* 2.5 or max. overload
∆R ±0.2% for high power rating voltage for 5 seconds
Insulation Resistance: >1000MΩ Apply 100VDC for 1 minute
∆R ±0.05% ∆R ±0.2% 70 ±2°C, max. working voltage
Endurance: >7kΩ ∆R ±0.5% for 1000hrs with 1.5hrs
∆R ±0.5% for high power rating “ON” and 0.5 hrs “OFF”
Damp Heat with Load: ∆R ±0.05% ∆R ±0.3% 40 ±2°C, 90 - 95% R.H. max. working voltage
∆R ±0.5% for high power rating hrs with 1.5hrs “ON” and 0.5hrs “OFF”
Bending Strength: ∆R ±0.05% ∆R ±0.2% Bending amplitude 3mm for 10 seconds
Solderability: 95% min. coverage 245 ±5°C for 3 seconds
Resistance to Soldering Heat: ∆R ±0.05% ∆R ±0.2% 260 ±5°C for 10 seconds
Dielectric Withstand Voltage: By Type Max. overload voltage for 1 minute
Thermal Shock: ∆R ±0.05% ∆R ±0.25% -55°C to +150°C, 100 cycles
Low Temperature Operation: ∆R ±0.05% ∆R ±0.2% 1 hour, -65°C, followed by 45 minutes of RCWV
∆R ±0.5% for high power rating
Reference Standards: MIL-STD-202, JIS-C 5201-1
Storage Temperature: 25±3°C; Humidity < 80%RH
Thin Film Precision Resistors
Type CPF Series
1773200 CIS WR 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Marking Codes - Case Sizes 0805 to 2512
Resistance: 100Ω 2.2KΩ 10KΩ 49.9KΩ 100KΩ
Marking Code: 1000 2201 1002 4992 1003
IEC 4 Digit Marking
Case Sizes 0603
E24 10 11 12 13 15 16 18 20 22 24 27 30
33 36 39 43 47 51 56 62 68 75 82 91
E24 3 Digit Marking - Example: 101=100Ω 102=1KΩ
Code E96 Code E96 Code E96 Code E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Code AB C DE F GH X YZ
Multiplier 10010110210310410510610710-1 10-2 10-3
0603 E96 Marking Code Table
E96 3 Digit Marking - Examples: 14C=13K7Ω, 13C=13K3Ω, 68B=4K99Ω, 68X=49.9Ω
Thin Film Precision Resistors
Type CPF Series
1773200 CIS WR 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
14C
Dimensions
Part Number LW H a b Weight (g)
1000 pieces
CPF0201 0.58 ±0.05 0.29 ±0.05 0.23 ±0.05 0.12 ±0.05 0.15 ±0.05 0.14
CPF0402 1.00 ±0.05 0.50 ±0.05 0.30 ±0.05 0.20 ±0.10 0.20 ±0.10 0.54
CPF0603 1.55 ±0.10 0.80 ±0.10 0.45 ±0.10 0.30 ±0.20 0.30 ±0.20 1.83
CPF0805 2.00 ±0.15 1.25 ±0.15 0.55 ±0.10 0.30 ±0.20 0.40 ±0.25 4.71
CPF1206 3.05 ±0.15 1.55 ±0.15 0.55 ±0.10 0.42 ±0.20 0.35 ±0.25 9.02
CPF1210 3.10 ±0.15 2.40 ±0.15 0.55 ±0.10 0.40 ±0.20 0.55 ±0.25 10.00
CPF2010 4.90 ±0.15 2.40 ±0.15 0.55 ±0.10 0.60 ±0.30 0.50 ±0.25 23.61
CPF2512 6.30 ±0.15 3.10 ±0.15 0.55 ±0.10 0.60 ±0.30 0.50 ±0.25 38.08
L
a
W
t
b
1. Alumina Substrate
2. Bottom Electrode (Ag)
3. Top Electrode (Ag-Pd)
4. Edge Electrode (NiCr)
5. Barrier Layer (Ni)
6. External Electrode (Sn)
7. Resistor Layer (NiCr)
8. Overcoat (Epoxy)
9. Marking
-55 -40 -20 0 20 40 60 70 80 100 120 140 155
100
80
60
40
20
0
Rated Load (%)
Ambient Temperature (°C)
For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve.
Power Derating Curve
Recommend Land Pattern
Type AB C
CPF0201 0.25 0.3 0.40 ±0.2
CPF0402 0.5 0.5 0.60 ±0.2
CPF0603 0.8 1.0 0.90 ±0.2
CPF0805 1.0 1.0 1.35 ±0.2
CPF1206 2.0 1.15 1.70 ±0.2
CPF1210 2.0 1.15 2.50 ±0.2
CPF2010 3.6 1.4 2.50 ±0.2
CPF2512 4.9 1.6 3.10 ±0.2
Thin Film Precision Resistors
Type CPF Series
1773200 CIS WR 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Packaging Quantity & Reel Specifications
Type øA øB øC WTPaper Embossed
Tape (EA) Plastic Tape (EA)
CPF0201 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 9.5 ±1.0 11.5 ±1.0 1000 / 5000 -
CPF0402 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 9.5 ±1.0 11.5 ±1.0 1000 / 5000 -
CPF0603 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 9.5 ±1.0 11.5 ±1.0 1000 / 5000 -
CPF0805 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 9.5 ±1.0 11.5 ±1.0 1000 / 5000 -
CPF1206 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 9.5 ±1.0 11.5 ±1.0 1000 / 5000 -
CPF1210 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 9.5 ±1.0 11.5 ±1.0 1000 / 5000 -
CPF2010 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 13.5 ±1.0 15.5 ±1.0 - 4000
CPF2512 178.0 ±1.0 60.0 +1.0 13.5 ±0.7 13.5 ±1.0 15.5 ±1.0 - 4000
Paper Tape Specification
Type A B W E F P0P1P2øD0T
CPF0201 0.40 ±0.05 0.70 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 2.00 ±0.05 2.00 ±0.05 1.55 ±0.03 0.42 ±0.02
CPF0402 0.70 ±0.05 1.16 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 2.00 ±0.05 2.00 ±0.05 1.55 ±0.05 0.40 ±0.03
CPF0603 1.10 ±0.05 1.90 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.60 ±0.03
CPF0805 1.60 ±0.05 2.37 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.75 ±0.05
CPF1206 2.00 ±0.05 3.55 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.75 ±0.05
CPF1210 2.75 ±0.05 3.40 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.05 4.00 ±0.10 2.00 ±0.05 1.60 ±0.10 0.75 ±0.05
Thin Film Precision Resistors
Type CPF Series
1773200 CIS WR 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
CPF 0603 B 100R E1
Common Part
CPF - Chip
precision
film resistor
Package Size
0201
0402
0603
0805
1206
1210
2010
2512
Tolerance
B - ± 0.1%
D - ±0.5%
F - ± 1%
Value
100R
(100 Ohms)
1K0
(1000 Ohms)
100K
(100,000 Ohms)
TCR
D - 15ppm
E - 25ppm
C - 50ppm
Packaging
1 - 1K REEL
Blank - 5K REEL
How to Order
Embossed Plastic Tape Specifications
Type A B W E F P0P1P2øD0T
CPF2010 2.85 ±0.10 5.45 ±0.10 12.0 ±0.10 1.75 ±0.10 5.5 ±0.05 4.00 ±0.05 4.00 ±0.10 2.00 ±0.05 1.50 +0.10 1.00 ±0.20
CPF2512 3.40 ±0.10 6.65 ±0.10 12.0 ±0.10 1.75 ±0.10 5.5 ±0.05 4.00 ±0.05 4.00 ±0.10 2.00 ±0.05 1.50 +0.10 1.00 ±0.20
Thin Film Precision Resistors
Type CPF Series
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
