Product Data Sheet
A Regal Brand
www.marathonsp.com 1
EPBCP45
Power Distribution Block
200 Amps 600 Volts AC/DC
Wire Range
• Line: (1) 3/0 - #14 AWG (70 mm2 - 2.5 mm2)
• Load: (4) #2 - #14 AWG (25 mm2 - 2.5 mm2)
Electrical Ratings
• 200 Amps
• 600V per UL 1953 & CSA 22.2 No. 158, class B & C requirements
• 1000V AC/DC per IEC 60947-7-1 (CE)
• Short circuit current ratings (SCCR): See SCCR section below for specications.
• CU9 - 90°C connector terminal rating with copper wire
• Touch protection: IP-20 (IEC 60529)
• Factory & Field Wiring
Agency Compliance
• UL Listed, Investigated to UL 1953, File QPQS.E309401
• CSA - certifed to C22.2 No. 158, File No. LR19766 (wire classes B & C only)
• CE compliant to IEC 60947-7-1
Material Information
• Insulator base:
• Thermoplastic
• Flammability rating of insulator base UL94V0
• Insulator base temperature rating: -40°C to 125°C (UL RTI)
• Connector: copper, tin plated
• Terminal set screws: steel, nickel plated
• Connector mounting screws: steel, zinc plated
• RoHS compliant
www.marathonsp.com 2PDS 0420 REV-H 12/19/17
Termination Specications
1 For information on copper stranded wire classes please visit:
http://www.marathonsp.com/exible-stranded-wire.php
• Copper solid wire range: 10 - 14 AWG
• Wire strip length: 7/8 in. (18mm)
• IP-20 protection: 3/0 - 2
• Terminal screw drive: 6 mm hex
Load Side Wire Size
(CU Stranded) Torque Wires /
Terminal Wire Class (UL) 1
2 5.7 N·m (50 lbf·in) 1 B, C
4 - 6 5.7 N·m (50 lbf·in) 1 B, C, G, H, I (DLO)
8 5.7 N·m (50 lbf·in) 1 - 2 B, C, G, H, I (DLO)
10 4.5 N·m (40 lbf·in) 1 - 2 B, C, G, H, I (DLO)
12 - 14 4.5 N·m (40 lbf·in) 1 - 4 B, C, G, H, I (DLO)
• Copper solid wire range: 10 - 14 AWG
• Wire strip length: 11/16 in. (17mm)
• IP-20 protection: 2 - 14
• Terminal screw drive 4 mm hex
Line Side Wire Size
(CU Stranded) Torque Wires /
Terminal Wire Class (UL) 1
3/0 20.3 N·m
(180 lbf·in) 1B, C
2/0 - 2 20.3 N·m
(180 lbf·in) 1 B, C, G, H, I (DLO)
4 20.3 N·m
(180 lbf·in) 1 B, C, G, H, I (DLO)
420.3 N·m
(180 lbf·in) 1 - 2 B, C
6 - 8 20.3 N·m
(180 lbf·in) 1 - 2 B, C, G, H, I (DLO)
10 - 14 5.6 N·m (50 lbf·in) 1 - 2 B, C, I (DLO)
www.marathonsp.com 3PDS 0420 REV-H 12/19/17
Short Circuit Current Ratings (SCCR)
• The suitable conductor ranges are limited to the table values only for achieving the SCCR in excess of the default
rating of 10,000A.
• Other conductor combinations within the “Terminal Specications” noted are suitable for achieving a SCCR of
10,000A (the default rating of terminal blocks).
• Enclosure size – Investigated with a minimum 16X12X6 enclosure. Use in smaller enclosures is subject to end use
evaluation.
SCCR With Fuses
* Any wire class evaluated (see terminal specication section)
Wire
Class
Suitable
Conductors
Max Overcurrent Protection Fuse Required
Amp Rating / Class SCCR RMS
Sym. Amps
600V. Max
Line Load J T RK1 RK5 G CC
B, C 3/0 - 8 2 - 8 225 225 200 60 60 30 100,000
B, C 3/0 - 8 8 - 12 100 110 100 30 60 30 100,000
G, H, I 2/0 - 8 4 - 8 225 225 200 60 60 30 100,000
G, H, I 2/0 - 8 8 - 12 100 110 100 30 60 30 100,000
(*) 3/0 - 14 2 - 14 None 10,000
Wire
Class
Suitable
Conductors
Overcurrent Protection Circuit Required
Voltage
AC Max.
Line Load Manufacturer Type Max Amperage
SCCR
RMS
Sym.
AMPS
B, C 2/0 - 8 2 - 10 Allen Bradley
140G-J6
140G-J0
140G-J15
140MG-J8
250 65 kA 480
B, C 3-10 (1) 3 - 10
with (1) 10 Siemens NCGA 80 35 kA 480
B, C 3/0 - 4 2 - 10 Square D
JDL36250 250 18kA
480
JGL36250 250 35kA
JJL36250 250 65kA
JLL36250 250 65kA
SCCR With Circuit Breakers
www.marathonsp.com 4PDS 0420 REV-H 12/19/17
Drawing
• Mounting (Panel):
• For use with M6 or #10 fastener.
• Mounting torque to be determined in end use application not to exceed 30 lbf·in (3.4 N·m)
• Marker cards:
• white plastic inserts to mark circuits available.
• Printing options available, consult customer service for specications.
• Allen wrenches (6mm):
4 mm 6 mm
• S & K tools 45954 45956
• Snap-on tools FAML4E FAML6E
• MAC tools XDLS4MM XDLS6MM
• McMaster Carr 8367A22 8367A24
• Armstrong 38-707 38-711
Installation & Accessories