T16T SnubberlessTM, logic level and standard 16 A Triacs Features A2 Medium current Triac High static and dynamic commutation Low thermal resistance with clip bonding Packages is RoHS (2002/95/EC) compliant 600 V VRM G A1 A1 A2 Applications Value sensitive application General purpose ac line load switching Motor control circuits in power tools Small home appliances, lighting Inrush current limiting circuits Overvoltage crowbar protection G TO-220AB insulated (T16xxT-6I) Table 1. Description Available in through-hole, the T16T series of Triacs can be used as on/off or phase angle control function in general purpose ac switching where high commutation capability is required. Device summary Order code Symbol Value T1610T-6I IGT 3Q logic level 10 mA T1620T-6I T1635T-6I IGT 3Q Snubberless 20 / 35 mA This series can be designed-in in many value sensitive appliances thanks to the parameters guidance provided in the following pages. Provides insulation rated at 2500 V rms (TO-220AB insulated package). TM: Snubberless is a trademark of STMicroelectronics January 2010 Doc ID 16488 Rev 2 1/9 www.st.com 9 Characteristics T16T 1 Characteristics Table 2. Absolute maximum ratings (limiting values; Tj = 25 C, unless otherwise specified) Symbol IT(RMS) ITSM I t dI/dt VDSM / VRSM IGM PG(AV) Tstg Tj 2/9 Parameter On-state rms current (full sine wave) Value Unit Tc = 86 C 16 A Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) F = 50 Hz tp = 20 ms 120 F = 60 Hz tp = 16.7 ms 126 It Value for fusing tp = 10 ms Critical rate of rise of on-state current IG = 2 x IGT tr 100 ns F = 60 Hz Non repetitive surge peak off-state voltage Peak gate current A 105 As Tj = 125 C 50 A/s tp = 10 ms Tj = 25 C VDRM/VRRM + 100 V tp = 20 s Tj = 125 C 4 A Tj = 125 C 1 W Storage junction temperature range - 40 to + 150 C Operating junction temperature range - 40 to + 125 C Average gate power dissipation Doc ID 16488 Rev 2 T16T Characteristics Table 3. Electrical characteristics (Tj = 25 C, unless otherwise specified) T16xxT Symbol Test conditions Quadrant Unit T1610T T1620T T1635T IGT (1) VD = 12 V RL = 30 I - II - III 10 20 35 MAX. mA IV VGT VD = VDRM, RL = 3.3 k, Tj = 25 C ALL MAX. 1.3 V VGD VD = VDRM, RL = 3.3 k, Tj = 125 C ALL MIN. 0.2 V IH (2) IT = 500 mA MAX. I - III IL IV IG = 1.2 IGT VD = 67% VDRM, gate open Tj = 125 C (di/dt)c (2) 40 20 35 50 Tj = 150 C(3) 30 40 80 100 1000 2000 20 500 1000 6 16 V/s 8 Tj = 125 C 4 Without snubber MIN. A/ms 3 (dV/dt)c = 0.1 V/s (dV/dt)c = 10 V/s mA mA MIN. (dV/dt)c = 0.1 V/s (dV/dt)c = 10 V/s 25 MAX. II dV/dt (2) 12 Tj = 150 C(3) 1 Without snubber 3 12 1. minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1. 3. derating information for excess temperature above Tj max. Table 4. Static characteristics Symbol Test conditions Value Unit VT (1) ITM = 22.6 A, tp = 380 s Tj = 25 C MAX. 1.55 V VTO (1) Threshold voltage Tj = 125 C MAX. 0.85 V Dynamic resistance Tj = 125 C MAX. 30 m 5 A RD (1) IDRM IRRM Tj = 25 C VDRM = VRRM MAX. Tj = 125 C Tj = 150 C(2) VD = 0.9 x VDRM 1 mA TYP. 1.9 1. for both polarities of A2 referenced to A1. 2. derating information for excess temperature above Tj max. Doc ID 16488 Rev 2 3/9 Characteristics Table 5. T16T Thermal resistance Symbol Parameter Value Unit Rth(j-c) Junction to case (AC) 2.1 C/W Rth(j-a) Junction to ambient (DC) 60 C/W Figure 1. 20 Maximum power dissipation versus Figure 2. rms on-state current (full cycle) P(W) IT(RMS)(A) = 180 18 On-state rms current versus case temperature (full cycle) 180 = 180 16 TO-220 ins. 16 14 14 12 12 10 10 8 8 6 6 4 4 2 2 IT(RMS)(A) 0 0 0 1 2 Figure 3. 3.5 3 4 5 6 7 8 9 10 11 12 13 14 15 16 On-state rms current versus ambient temperature TC(C) 0 25 Figure 4. IT(RMS)(A) 50 75 100 125 Relative variation of thermal impedance versus pulse duration 1.0E+00 K = [Zth / Rth] Zth(j-c) = 180 3.0 Zth(j-a) TO-220AB 2.5 2.0 TO-220 ins. 1.0E-01 1.5 1.0 TO-220AB 0.5 0.0 Tp(s) Ta(C) 0 25 Figure 5. 1000 50 75 100 125 On state characteristics (maximum values) 1.0E-02 1.0E-03 1.0E-02 Figure 6. ITM(A) 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 Surge peak on state current versus number of cycles ITMS(A) 120 t = 20 ms 100 Non repetitive Tj initial = 25 C 100 One cycle 80 60 10 Tj = 125 C Tjmax: Vto = 0.85 V Rd = 25 mW Tj = 25 C VTM(V) 1 0 4/9 Repetitive Tc = 86 C 40 1 2 3 20 TO-220AB ins. 0 4 1 Doc ID 16488 Rev 2 Number of cycles 10 100 1000 T16T Characteristics Figure 7. 10000 Non repetitive surge peak on state current for a sinusoidal ITSM(A), It (As) Figure 8. 3.0 Tj initial = 25 C Relative variation of gate trigger current and gate trigger voltage versus junction temperature IGT, VGT[Tj] / IGT, VGT[Tj = 25 C] 2.5 1000 IGT Q3 2.0 IGT Q1-Q2 ITSM 1.5 dl /dt limitation: 50 A / s 100 1.0 It IGT Q1-Q2-Q3 0.5 tp(ms) 10 0.01 0.10 Figure 9. 2.5 1.00 10.00 0.0 -50 Tj(C) -25 0 25 50 75 100 125 Relative variation of holding Figure 10. Relative variation of critical rate of current and latching current versus decrease of main current versus junction temperature junction temperature IH, IL[Tj] / IH, IL[Tj = 25 C] 7 dV / dt [Tj] / dV / dt [Tj = 125 C] VD = VR = 402 V 6 2.0 5 1.5 4 3 1.0 IL 0.5 0.0 -50 IH 1 Tj(C) Tj(C) 0 -25 0 25 50 75 100 125 Figure 11. Relative variation of critical rate of decrease of main current versus junction temperature 8 1 2 25 50 75 100 125 Figure 12. Leakage current versus junction temperature for different values of blocking voltage (typical values) (dl / dt)c [Tj] / (dl / dt)c [Tj = 125 C] 1.0E+00 IDRM/IRRM [Tj; VDRM / VRRM] / IDRM/IRRM [Tj = 125 C; 700 V] VDRM = VRRM = 600 V 7 6 VDRM = VRRM = 400 V 1.0E-01 5 4 VDRM = VRRM = 200 V 3 1.0E-02 2 1 Tj(C) 0 25 50 75 1.0E-03 100 125 Doc ID 16488 Rev 2 25 50 75 100 125 5/9 Ordering information scheme 2 T16T Ordering information scheme Figure 13. Ordering information scheme T TRIAC Current 16 = 16 A Sensitivity 10 = 10 mA 20 = 20 mA 35 = 35 mA Application specific Voltage 6 = 600 V Package I = TO-220AB-Ins. 6/9 Doc ID 16488 Rev 2 16 10 T - 6 I T16T 3 Package mechanical data Package mechanical data Epoxy meets UL94, V0 Lead-free packages In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. TO-220AB insulated dimensions Dimensions Ref. Millimeters Min. A 15.20 a1 C B OI Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 OI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 b2 L F A I4 l3 c2 a1 l2 a2 M b1 c1 e M Doc ID 16488 Rev 2 2.60 0.102 7/9 Ordering information 4 Ordering information Table 7. 5 Ordering information Order code Marking T1610T-6I T1610T-6I T1620T-6I T1620T-6I T1635T-6I T1635T-6I Package Weight Base qty Delivery mode TO-220AB ins. 2.3 g 50 Tube Revision history Table 8. 8/9 T16T Document revision history Date Revision Changes 03-Dec-2009 1 Initial release. 18-Jan-2010 2 Updated pag.1. Doc ID 16488 Rev 2 T16T Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 16488 Rev 2 9/9