Features * * * * * * Unregulated Converters 1W Power in SMD package Pin compatible with R1D series -40C to +95C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1 certified, CB Report 5000m operation Description Low cost, low profile, open-frame 1W SMD isolated DC/DC dual output converters. The R1DX operates from 5V and offers 5, 9, 12 or 15 dual outputs. There is no minimum load requirement and the quiescent consumption is less than 150mW. Standard isolation is 1kVDC/1s and a /H version with 3kVDC/1s is available. The operating temperature is from -40C up to +95C without derating. The pin-out is industry standard and compatible with the R1D series, but at half the height. The converters are fully certified to IEC/EN/UL62368 and IEC/EN/UL60950 and are 10/10 RoHS-conform. Class A EMC conformity requires only an input capacitor and a simple low cost LC filter is all that is needed for Class B EMC. DC/DC Converter R1DX 1 Watt SMD Dual Output Selection Guide Part Number nom. Input Voltage [VDC] Output Voltage [VDC] Output Current [mA] Efficiency typ. (1) [%] max. Capacitive Load (2) [F] 5 5 100 78 1000 R1DX-0505 R1DX-0509 5 9 56 78 470 R1DX-0512 5 12 42 80 220 R1DX-0515 5 15 33 80 220 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resistive load IEC/EN62368-1 certified UL62368-1 certified IEC/EN60950-1 certified C22.2 No. 62368-1-14 certified CB Report EN55032 compliant EN55024 compliant Model Numbering R1 DX-__ __ /_ __ Output Power "Packaging (4)" Dual Isolation Voltage (3) nom. Output Voltage nom. Input Voltage Notes: Note3: Note4: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H", high isolation voltage (3kVDC/1 second) with suffix -R", standard packaging Tape and Reel with suffix -Tray" for optional tray packaging Ordering Examples: R1DX-0505-R R1DX-0515/H-Tray www.recom-power.com E224736 5Vin 5Vin 5Vout 15Vout 1kVDC/1 second isolation 3kVDC/1 second isolation tape and reel packaging tray packaging REV.: 5/2019 ECO-1 R1DX DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal input voltage, full load unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor Input Voltage Range 10.0% 40mA Quiescent Current Minimum Load 0% 20kHz Internal Operating Frequency Output Ripple and Noise (5) 60kHz 20MHz BW 100kHz 100mVp-p Notes: Note5: Measurements are made with a 0.1F MLCC across output (low ESR) DX-05xx Efficiency vs. Load 100 90 Efficiency [%] 80 70 60 50 40 30 5Vout 9Vout 12Vout 15Vout 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy 5.0% max. Line Regulation low line to high line Load Regulation 1.2% typ. at 1.0% of Vin typ. 5Vout all others 10% to 100% load 10.0% typ. / 15.0% max. 8.0% typ. / 10.0% max. Cross Regulation 6.5% max. Tolerance Envelope R1DX-0505(/H) R1DX-0509(/H) +15% Typic a l Loa +10% +7% +5% d Lin e Vnom Output Voltage [%] Output Voltage [%] +9% -2% -5% 10 50 Load L +5% ine Vnom -1% -5% 10 100 Typica l 50 100 Output Load [%] Output Load [%] continued on next page www.recom-power.com REV.: 5/2019 ECO-2 R1DX DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal input voltage, full load unless otherwise specified) Tolerance Envelope R1DX-0512(/H) R1DX-0515(/H) Output Voltage [%] +10% Typical L +5% +5% oad Lin e Vnom -1% -5% 10 50 100 Output Load [%] PROTECTIONS Parameter Type Value standard tested for 1 second rated for 1 minute (6) 1kVDC 500VAC with suffix "/H" tested for 1 second rated for 1 minute (6) Isolation Resistance 3kVDC 1.5kVAC 10G min. Isolation Capacitance 100pF max. Isolation Voltage I/P to O/P 1A max. 3A max. standard with suffix "/H" Leakage Current Insulation Grade Notes: Note6: Note7: functional For repeat Hi-Pot testing, reduce the time and/or the test voltage Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type Protection Circuit F1 L1 +Vin +Vin +Vout C1 Com -Vin -Vin -Vout +Vout Com -Vout ENVIRONMENTAL Parameter Operating Temperature Range Condition Value @ natural convection and full load (refer to derating graph) Operating Altitude Operating Humidity 5000m non-condensing 5% - 95% RH max. Pollution Degree PD2 Vibration MTBF -40C to +95C according to MIL-STD-202G according to MIL-HDBK-217F, G.B. +25C +95C 20900 x 10 hours 7200 x 10 hours continued on next page www.recom-power.com REV.: 5/2019 ECO-3 R1DX DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal input voltage, full load unless otherwise specified) Derating Graph (@ Chamber and natural convection 0.1m/s) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 95 Ambient Temperature [C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E224736 Information Technology Equipment, General Requirements for Safety (CB Scheme) E224736-4788277362-2 Information Technology Equipment, General Requirements for Safety Audio/video, information and communication technology equipment - Safety requirements (LVD) E224736 Audio/video, information and communication technology equipment - Safety requirements Audio/video, information and communication technology equipment - Safety requirements (CB Scheme) Standard UL60950-1, 2nd Edition 2014 CAN/CSA C22.2 No. 60950-1-07, 2nd Edition 2014 IEC60950-1:2005 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 UL62368, 2nd Edition, 2014 CAN/CSA -C22.2 No. 62368-1-14, 2nd Edition, 2014 EN62368-1:2014 + A11:2017 E224736-4788277362-1 RoHS2+ IEC62368-1:2014 2nd Edition RoHS 2011/65/EU + AM2015/863 EMC Compliance Condition Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement with external filter (see filter suggestion) Information technology equipment - Immunity characteristics Limits and methods of measurement EN55032:2015, Class A and B EN55024:2010 +A1:2015 Air: 2, 4, 6, 8kV Contact: 2, 4kV ESD Electrostatic discharge immunity test Standard / Criterion IEC61000-4-2:2008, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 3 V/m IEC61000-4-3:2006 + A2:2010, Criteria A Fast Transient and Burst Immunity 0.5kV IEC61000-4-4:2012, Criteria A Surge Immunity 0.5kV IEC61000-4-5:2014, Criteria B Immunity to conducted disturbances, induced by radio-frequency fields 3V r.m.s. IEC61000-4-6:2013, Criteria A 50Hz / 1A/m IEC61000-4-8:2009, Criteria A Power Magnetic Field Immunity continued on next page www.recom-power.com REV.: 5/2019 ECO-4 R1DX DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal input voltage, full load unless otherwise specified) EMC Filtering Suggestions for EN55032 C2 L1 +Vin +Vin +Vout +Vout C1 Com Com -Vin -Vin -Vout Component List Class A C2 L1 C1 4.7F MLCC 470pF/4kVDC C1 10H SMD Inductor -Vout Component List Class B C2 L1 10F MLCC 470pF/4kVDC 10H SMD Inductor DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case PCB black plastic (UL94V-0) FR4 (UL94V-0) Dimension (LxWxH) 15.24 x 11.10 x 8.00mm Weight 1.2g typ. suckable area Dimension Drawing (mm) CG 0.25 8.0 8.5 max. Pin Connection Pin # Dual 1 -Vin 2 +Vin 4 Com 5 -Vout 7 +Vout 10 NC 0.50 11.1 4x2.54= 10.16 Recommended Footprint Details 4 5 7 Top View 1 2 4 5 10.7 www.recom-power.com Pin Thickness: Lenght: 0.05mm +0.25/-0.50mm 10 Bottom View 10 1.27 2.54 15.24 1 2 CG= center of gravity NC= no connection Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 7 12.07 2.5 2.54 REV.: 5/2019 ECO-5 R1DX DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal input voltage, full load unless otherwise specified) INSTALLATION and APPLICATION Isolated DAC (10VDC) AVDD R1DX-0512/H +Vin +Vin +Vin +Vout GND +Vout +5V COM 5V -Vin R-78E5.0-0.5 +12V -Vin -Vout IC1 AVSS -12V AGND DGND R1 + R2 GAIN= R2 VCC DVDD CS RFB AVDD ISOLATION CLK DAC + IOUT +12V Vout - SDI -12V AVSS 10V 3kV Isolation R1 GND SDO R2 DGND AGND DGND AGND AGND PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity tape and reel (carton) reel 355.0 x 340.0 x 35.0mm 330.2 x 330.2 x 30.0mm tray 260.0 x 205.0 x 27.0mm tape and reel 250pcs tray 30pcs Tape Width Storage Temperature Range 24.0mm non-condensing Storage Humidity -55C to +125C 5% - 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 5/2019 ECO-6