High-Speed Switching Diode Features: * * * * Fast Switching Speed Surface Mount Package Ideally Suited for Automatic Insertion For General Purpose Switching Applications High Conductance Applications: High speed switching application Max. Rating @ Ta = 25C unless otherwise specified Parameter Symbol Limits Unit Vrrm Vrms Vr 75 V Forward continuous current Ifm 200 mA Power dissipation Pd 225 mW Operating junction temperature range Tj 150 C Tstg -55 to +150 C Peak repetitive peak reverse voltage Working peak reverse voltage DC reverse voltage Operating and storage temperature range Electrical Characteristics @ Ta = 25C unless otherwise specified Parameter Reverse breakdown voltage Symbol Conditions Min. Max. Unit 75 - V mV Vr(br) Ir = 100A Forward voltage Vf1 Vf2 Vf3 Vf4 If = 1mA If = 10mA If = 50mA If = 150mA - 715 855 1,000 1250 Reverse current Ir Vr = 75V - 2.5 A Diode capacitance Cd Vr = 0V, f = 1MHz - 20 pF Reverse recovery time trr If = Ir = 10mA Vr = 5V, Rl=100 - 4 ns www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 High-Speed Switching Diode Typical Characteristics @ Ta = 25C unless otherwise specified www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 High-Speed Switching Diode Plastic surface mounted package Soldering Footprint Package Information Device Package Shipping MMBD914-7-F SOT-23 3,000 / Tape & Reel Part Number Table Description Part Number High-Speed Switching Diode MMBD914-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0