
O
* High current capability
* High surge current capability
* High reliability
* High efficiency
* Low power loss
* Low cost
* Low forward voltage drop
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.339 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL SB
220S SB
230S SB
240S SB
250S SB
260S SB
270S SB
280S SB
290S SB
2B0S UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 70 80 90 100 Volts
Maximum RMS Voltage VRMS 14 21 28 35 42 49 56 63 70 Volts
Maximum DC Blocking Voltage VDC 20 30 40 50 60 70 80 90 100 Volts
Maximum Average Forward Current
0.375", 9.5mm Lead Length See Fig.1 IF(AV)2.0 Amps.
Peak Forward Surge Current,
8.3ms single half sine wave superimposed
on rated load (JEDEC Method) IFSM 60 Amps.
Maximum Forward Voltage at IF = 2.0 Amps. (Note 1) VF0.5 0.74 0.79 Volt.
Maximum Reverse Current at
Rated DC Blocking Voltage (Note 1) IR0.5 mA
Junction Temperature Range TJ - 65 to + 125 - 65 to + 150 °C
Storage Temperature Range TSTG - 65 to + 150 °C
Notes :
(1) Pulse Test : Pulse Width = 300 µs, Duty Cycle = 2%. UPDATE : MAY 10, 1999
RATING
DO - 41
0.205 (5.20)
0.160 (4.10)
0.107 (2.74)
0.080 (2.03)
0.034 (0.86)
0.028 (0.71)
1.00 (25.4)
MIN.
1.00 (25.4)
MIN.
Dimensions in inches and ( millimeters )