SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications UNT Available in enhanced or standard design versions O CE M FA SUR Low profile surface mount package E2000 series part numbers designed for AMD, DEC, LSI, Motorola, and National transceivers RoHS peak reflow temperature rating 245C Electrical Specifications @25C / Operating Temperature 0C to +70C RoHS Compliant Part Number Insertion Loss to 10 MHz (dB MAX) PE-68025QNL* PE-68026NL* PE-68027QNL* PE-68056NL E2001QNL E2003QNL E2007QNL E2009QNL -6.0 -1.0 -6.5 -1.0 -5.5 -6.0 -5.0 -1.0 Attenuation (TX) (dB MIN) 30 MHz -35 -30 -35 -30 -30 -30 -30 -30 40 MHz 100 MHz -35 -35 -35 -35 -35 -35 -27 -27 -30 -35 -27 -27 -35 -40 -27 -27 Return Loss 5 MHz to 10 MHz (dB MIN) Crosstalk (db MIN) 100 -18 -18 -18 -18 -18 -18 -18 -18 5-10 MHz -35 -35 -35 -30 -30 -35 -25 -35 98 13 -15 -15 -15 -15 -15 -15 -15 -15 Common Mode Rejection (TX) (dB MIN) 5 MHz -60 -60 -60 -40 -35 -40 -35 -40 10 MHz -60 -60 -60 -30 -30 -35 -30 -35 50 MHz -55 -55 -55 -50 -55 -45 -55 -45 Hipot (Vrms MIN) 100 MHz 200MHz -50 -45 -50 -45 -50 -45 -45 -- -50 -- -30 -- -50 -- -45 -- 1500 1500 1500 1500 1500 1500 1500 1500 NOTE: Part numbers indicated with an asterisk (*) are enhanced performance parts. All transmit turns ratios are 1:1, except the E2009 which is 1: 1.414. For the PE-680XXNL part series, the receive and transmit sides meet IEEE 802.3i 1993 specifications, while transmit side is enhanced for FCC/VDE Class B system emissions requirement. Specifications reflect filter sections. Additional attenuation is due to predistortion resistors. Mechanical PE-680XXNL, E200XQNL Part Number E200XQNL PE-680XX/Q/NL PE-680XXNL / E200XQNL Dimension A 1.00/25,40 .920/23,37 DATE CODE COUNTRY OF ORIGIN Weight . . . . . . . . . . . . . . . Tube . . . . . . . . . . . . . . . . . Tape & Reel PE-680XX . . . . . . . . . . . . . E200X . . . . . . . . . . . . . . . . . . 2.5 grams . . . . 20/tube . . . 250/reel . . . 300/reel Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 1 Networking.PulseElectronics.com E115.E (03/19) SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications Resistor Values () Part Number PE-68025QNL PE-68026NL PE-68027QNL IC Manufacturer AMD Various National R1 TXD (+) = 61.9 -- TXOD (-) = 274 R2 TXP (+) = 422 -- TXO (+) = 66.5 R3 TXD (-) = 61.9 -- TXO (-) = 66.5 R4 TXP (-) = 422 -- TXOD (+) = 274 R5 1.2k -- 806 R6 RX (+) = 49.9 -- RX (+) = 49.9 R7 RX (-) = 49.9 -- RX (-) = 49.9 Schematic PE-68025QNL, PE-68026NL, PE-68027QNL RECEIVE CHANNEL TRANSMIT CHANNEL 1 UTP SIDE CHIP SIDE R1 LOW PASS FILTER R2 CHIP SIDE 1:1 UTP SIDE LOW PASS FILTER 16 8 1:1 9 R3 R5 2 100 W 7 5 3 R4 6 LOW PASS FILTER 4 10 12 11 LOW PASS FILTER 14 100 W NOTE: PE-68026NL does not contain resistors. They are an external configuration. Typical Application Circuit PE-68025QNL, PE-68026NL, PE-68027QNL ANALOG INTERFACE MODULE TWISTED PAIR TRANSMIT OUTPUTS 1 R1 3 2 R2 R3 5 4 R4 6 7 2 LOCATION OF REISITORS WHEN EX2001 IS USED Transceiver Chip R5 LPF RXI- 2 1 LPF 16 LPF TD+ RD- RJ-45 CONNECTOR LPF 15 TD- 3 RD+ 6 R6 RXI+ UTP 8 R7 14 13 12 11 10 9 .01F Networking.PulseElectronics.com E115.E (03/19) SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications Resistor Values () Part Number E2001QNL E2003QNL E2007QNL IC Manufacturer National AMD Motorola R1 R2 R3 R4 R5 R6 R7 348.0 61.9 39.0 53.6 422.0 -- 53.6 61.9 39 348.0 422.0 -- 806 1,210 -- 49.9 49.9 49.9 49.9 49.9 49.9 Schematic E2001QNL, E2003QNL, E2007QNL TRANSMIT CHANNEL 1 RECEIVE CHANNEL UTP SIDE CHIP SIDE R1 LOW PASS FILTER R2 CHIP SIDE 1:1 UTP SIDE LOW PASS FILTER 16 8 2 R5 R3 100 W 5 3 R6 15 R4 LOW PASS FILTER 4 6 NOTE 1 1:1 9 100 W 12 R7 11 LOW PASS FILTER 14 NOTE: Common Mode Choke on transmit channel for E2001QNL and E2003QNL. Typical Application Circuit E2001QNL, E2003QNL, E2007QNL ANALOG INTERFACE MODULE TWISTED PAIR TRANSMIT OUTPUTS 1 R1 3 4 R3 R4 2 R2 6 7 Transceiver Chip LPF UTP 8 2 1 R5 LPF RXI+ 16 TD+ RD- RJ-45 CONNECTOR LPF 15 TD- 3 RD+ LPF 6 R7 R6 14 13 RXI- 3 5 Networking.PulseElectronics.com 12 11 10 9 .01F E115.E (03/19) SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications Schematic E2009QNL, PE-68056NL TRANSMIT CHANNEL CHIP SIDE LOW PASS FILTER 1 LOW PASS FILTER 16 8 5 6 LOW PASS FILTER 14 Turns Ratio for Transmit: PE-68056NL is 1:1; E2009QNL is 1:1.414. Each module in this application contains low pass filers, isolation transformers, and common mode chokes. These components provide impedance matching, equipment isolation, and EMI suppression to comply with IEEE 802.3 requirements. The E2001QNL, E2003QNL, E2007QNL, PE-68025QNL and PE-68027QNL also provide the necessary data and pre-emphasis resistors recommended by most transceiver manufacturers. TXP- ANALOG INTERFACE MODULE TXDTXP+ TXD+ 1 5 3 6 7 UTP 8 2 Transceiver Chip 1 LPF 16 TD+ RD- RJ-45 CONNECTOR LPF 14 TD- 3 RD+ LPF 6 LPF 11 Application Notes E2009QNL, PE-68056NL 13 12 11 10 9 100W RXI- 9 NOTE: The PE-68056NL is designed for use with most transceivers requiring a turns ratio of 1:1 on transmit. The E2009QNL is designed for use with DEC and most other transceivers requiring a turns ratio of 1:1.414 on transmit. Typical Applications Circuit RXI+ UTP SIDE 12 LOW PASS FILTER 3 RECEIVE CHANNEL CHIP SIDE UTP SIDE NOTE: Resistors NOT included in this module. User compliance with FCC/CSPR Class B requirements can be achieved by applying rigorous design guidelines to suppress noise mechanisms. Attention to high frequency signal paths, proper PCB grounding techniques, and component placement are critical. Pins 5 and 12, when grounded, provide noise return paths. For PE-68025QNL, PE-68026NL, and PE-68027QNL, one of these pins (typically pin 12) must be decoupled with a bypass capacitor. The E2001QNL, E2003QNL, E2007QNL, E2009QNL, and PE-68056NL do not require the bypass capacitor, and pins 5 and 12 may be connected directly to ground. Recommended module orientation with respect to the RJ-45 connector is illustrated in each application circuit. Output pins 6 through 11 should be routed with short, matched traces to the connector for optimum EMI performance. Surface mount devices manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The products in this data sheet are transfer molded or open header in IC-style packaging, making them robust enough to withstand convection and infrared reflow solder temperatures up to 245C. In addition, compliant leads provide excellent solder-joint reliability with a coplanarity of .002" (0,05mm). For Tape & Reel orders, please add the suffix "T" to the end of the part number (i.e.PE-68025QNLT). For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 4 Networking.PulseElectronics.com E115.E (03/19)