16
PACKAGING
Littelfuse packaging specifications
Packaging
349 www.littelfuse.com
LITTELFUSE CASE QUANTITY QUANTITY COMPONENT TAPE REEL
PART NUMBER TYPE PER REEL PER BULK PACK SPACING (mm) SPACING (mm) DIMENSION (mm)
AB C
SMBJ series D0-214AA 3000 N/A 8 N/A 330
P6MSBJ series D0-214AA 3000 N/A 8 N/A 330
1KSMBJ series D0-214AA 3000 N/A 8 N/A 330
SA series D0-15 5000 1000 5 52.4 +/- 0.5 335
P6KE series D0-15 5000 1000 5 +/- 0.5 52.4 +/- 0.5 335
1.5KE, ICTE, MPTE, LCE series D0-201AD 1500 500 5 +/- 0.5 52.4 +/- 0.5 335
1N56, 1N60 series D0-13 1000 500 10 +/- 0.5 52.4 +/- 0.5 335
5KP series R6 1000 500 10 +/- 0.5 52.4 +/- 0.5 335
15KP series R6 1000 500 10 +/- 0.5 52.4 +/- 0.5 335
Foldbak series D0-201AD 1500 500 5 +/- 0.5 52.4 +/- 0.5 335
SLD series R6 1000 500 10 +/- 0.5 52.4 +/- 0.5 335
15KP cells / 5KP cells N/A N/A N/A N/A N/A N/A
T10A series D0-15 5000 1000 5 +/- 0.5 52.4 +/- 0.5 335
T10B series D0-201AD 1500 500 10 +/- 0.5 52.4 +/- 0.5 335
T10C series Case 3 N/A 500 N/A N/A N/A
SMBTJ series D0-214AA 3000 N/A 8 N/A 330
TO-220 series T0-220 N/A 500 N/A N/A N/A
1. T.V.S. PRODUCT
Littelfuse devices are available in Bulk or Tape and Reel
packaging, this option is requested by inserting either a ‘B’ or a
‘T’ into the Littelfuse part number.
Littelfuse’s standard practice for tape and reel product meets the
requirements of EIA Standard RS-296-D, “Lead Taping of
Components in Axial Lead Configuration for Automatic Insertion’,
level 1.
The quantity per reel or per bulk package are indicated below.
Orders for all Littelfuse T.V.S. axial product are only processed and
shipped in full reel / bulk increments, or multiples of.
Our surface-mount components are placed in embossed cavities
of anti-static/conductive carrier tape, and sealed with a cover
tape. The taped devices are supplied in reels in protective boxes.
The standard Littelfuse lead-tape packaging of surface-mount
components follow the requirements of EIA 481-1, shown below.
• Cover tape: This will not extend over the edge of the carrier
tape or extend over any part of the sprocket holes
• Carrier tape: This will release from the reel hub as the last
portion of the tape unwinds from the reel without damage
to the carrier tape and with the components remaining in
the cavities.
• Leader tape: A minimum length of 300mm leader (and
trailer) of tape will be provided before the first (and after
the last) component on the reel, with a minimum of forty
empty component carrier pockets covered with tape.