ESG SERIES ESG series capacitors are suitable for electronic ballast and other long life equipment. Load life 105, 5000 hours assured. Characteristics 160 ~450V -25 ~ + 105 10 to 220 uF I0.04CV or 10uA, whichever is greater (After 2 minutes) 20% at 120Hz , 20 160 200 250 350 400 450 0.15 0.15 0.15 0.20 0.20 0.22 Less than specified value Voltage Range Temperature Range Capacitance Range Leakage Current Capacitance Tolerance Dissipation Factor WV tan Load life after application of Leakage current the rated voltage for 5000 hrs Capacitance change Within 20% of initial value at 105 tan Less than 200% of specified value Shelf life (at 105) After 1000 hrs no load test, leakage current, capacitance and tansame as load life value. Diagram of dimensions D p d 10 5.0 0.6 13 5.0 0.6 16 7.5 0.8 18 7.5 0.8 22 10.0 0.8 Ripple Current Coefficients Frequency (Hz) 50 60 120 0.80 0.80 1.00 1K 10K 10K 1.50 1.70 1.90 Multiplier Correction Factor Temperature() Multiplier 65 2.00 85 1.65 105 1.00 29 ESG SERIES Dimensions, Maximum Permissible Ripple Current & Impedance WV Item uF 160 Impedance ()max DxL(mm) 20 100KHz Ripple Current mA(rms) 105 120Hz 250 Ripple Impedance Impedance Current mA ()max ()max (rms) DxL(mm) DxL(mm) 20 20 105 100KHz 100KHz 120Hz Ripple Current mA(rms) 105 120Hz 10 10x16 2.70 115 10x20 2.00 210 10x20 1.90 200 22 10x20 1.35 195 10x20 1.25 255 13x20 1.50 350 33 13x20 1.15 250 13x20 0.65 350 13x25 1.30 400 47 13x20 0.95 300 13x20 0.54 490 13x25 0.56 500 68 13x25 0.65 390 13x25 0.38 530 16x25 0.42 600 100 16x25 0.50 560 16x25 0.22 810 18x31.5 0.38 660 220 16x31.5 0.22 730 18x31.5 0.19 970 22x41 0.25 750 WV Item uF 30 200 350 Impedance ()max DxL(mm) 20 100KHz 400 Ripple Current mA(rms) 105 120Hz Impedance ()max DxL(mm) 20 100KHz 450 Ripple Current mA(rms) 105 120Hz Impedance ()max DxL(mm) 20 100KHz Ripple Current mA(rms) 105 120Hz 10 13x20 1.30 180 10x20 13x20 3.40 2.90 165 180 13x25 3.82 130 22 13x20 1.28 250 13x25 2.72 320 16x25 2.98 170 33 13x25 1.15 320 16x25 1.30 350 16x31.5 2.50 215 47 16x25 0.70 440 16x31.5 0.97 450 68 16x31.5 0.62 450 18x31 0.70 420 100 18x31 0.60 354 18x41 0.56 405