Ordering number:EN2931A SB10-05A2, SB10-05A3 Schottky Barrier Diode 50V, 1.0A Rectifier Applications Package Dimensions * High frequency rectification (switching regulators, converters, choppers). unit:mm 1208 [SB10-05A2] Features * Low forward voltage (VF max=0.58V). * Fast reverse recovery time (trr max=30ns). * Low switching noise. * Average rectified current (IO=1.0A). C:Cathode A:Anode unit:mm 1209 [SB10-05A3] C:Cathode A:Anode Specifications Absolute Maximum Ratings at Ta = 25C Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Rectified Current Symbol Conditions Ratings Unit VRRM VRSM IO Surge Forward Current IFSM Junction Temperature Tj Storage Temperature Tstg 50 V 55 V SB10-05A2 50Hz, resistive load, sine wave, Ta=33C (L=8mm, 10x10mm2 print land) 1.0 A SB10-05A3 50Hz, resistive load, sine wave, Ta=29C (L=3mm, 5x5mm2 print land) 1.0 A 50Hz sine wave, 1 cycle 25 A 125 C -40 to +125 C Electrical Characteristics at Ta = 25C Parameter Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance (Junction-Ambient) Conditons Symbol Ratings min typ max Unit VF IR IF=1.0A 0.58 V VR=50V 1.0 mA trr IFM=1A, -dIF/dt=50A/s Rth(j-a) No fin, device only 30 ns 140 C/W SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 43098HA (KT)/D198TA, TS No.2931-1/3 SB10-05A2, SB10-05A3 No.2931-2/3 SB10-05A2, SB10-05A3 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1998. Specifications and information herein are subject to change without notice. PS No.2931-3/3