RTB14012F (2-1419108-5) - Tyco Electronics

446

P&B

Dimensions are shown for

reference purposes only.

Dimensions are in inches over

(millimeters) unless otherwise

specified.

Catalog 1308242

Issued 3-03 (pdf revised 1-06)

Specifications and availability

subject to change.

www.tycoelectronics.com

Technical support:

Refer to inside back cover.

RT series (DC Coil)

16 Amp PC Board

Miniature Relay

File E22575

File LR15734

NR 6106

Users should thoroughly review the technical data before selecting a product

part number. It is recommended that users also seek out the pertinent

approvals files of the agencies/laboratories and review them to ensure the

product meets the requirements for a given application.

Features

• SPST through DPDT contact arrangements.

• Immersion cleanable and flux tight versions available.

• VDE 10mm spacing, 5kV dielectric, coil to contacts.

• UL Class F (155°C) coil insulation system.

• Conforms to UL 508, 1873, 353 and 1950.

• Low profile; 15.7mm height.

• Sensitive coil; 400mW.

• Withstand surge voltage of 10,000V.

• Potter & Brumfield or Schrack brand.

Contact Data

Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2,3.

2 Form A (DPST-NO) Wiring Diagram Code 5.

1 Form C (SPDT) Wiring Diagram Code 1, 2, 3.

2 Form C (DPDT) Wiring Diagram Code 5.

Material: Silver-nickel 90/10.

Minimum Load: 12V/100mA.

Expected Mechanical Life: 10 million operations.

Initial Contact Resistance: 100 milliohms max @ 1A 12VDC.

Designed to meet UL/CSA/VDE ratings @ 25°C with relay

properly vented. Remove vent nib after soldering and

cleaning.

Ratings @ 25°C

Initial Dielectric Strength

Between Open Contacts: >1,000VAC (1 minute).

Between Poles (code 5): >2,500VAC (1 minute).

Between Coil and Contacts: >5,000VAC (1 minute).

Surge Voltage (DC): >10,000VAC x (1.2 x 50 µsec).

Coil Data @ 25°C

Voltage: 5 to 110VDC.

Nominal Power @ 25°C: 400mW.

Duty Cycle: Continuous.

Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC

and 50% rel. humidity.

Coil Construction: UL Class F (155°C).

Operate Data @ 25°C

Must Operate Voltage(DC): 70% of nominal.

Must Release Voltage(DC): 10% of nominal.

Operate Time (Excluding Bounce):

7 ms, typ., 15ms max. at nom. voltage.

Release Time (Excluding Bounce):

3 ms, typ., 6ms max. at nom. voltage.

Environmental Data

Temperature Range:

Storage: -40°C to +105°C.

Operating: -40°C to +85°C at rated current.

Vibration, Operational

N.O.:0.065”(1.65mm) max. excursions from 10 - 55 Hz:

N.C.:0.032”(0.82mm) max. excursions from 10 - 55 Hz:

with no contact opening >10µs.

Mechanical Data

Termination: Printed circuit terminals.

Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case.

RT B, C, D, E: Immersion cleanable, plastic case.

Weight: 0.35 oz. (10g) approximately.

DC Must Nominal

Nominal Resistance Operate Coil

Voltage in Ohms Voltage Current

VDC ±10% VDC (mA) – 50/60Hz.

005 62 3.5 80

006 90 4.2 66.7

009 202 6.3 44.4

012 360 8.4 33.3

018 810 12.6 22.2

024 1,440 16.8 16.7

048 5,760 33.6 8.3

060 9,000 42.0 8.0

110 30,250 77.0 4.3

Coil Data @ 25°C

Max. Ambient Temp. vs. Coil Voltage

100

140

180

220

260

300

020 40 60 80 100

0 A

Max. Allowable Ambient Temp. (°C)

Applied Coil Voltage (% of rated nom.)

8 A

16A

12A

A: Coil temperature = Ambient temperature.

B: 110% of nominal coil voltage at rated contact load.

* Form A only

** Form B only

Code NO/NC Load Type Operations

1 10A/10A @ 277VAC Resistive/GP 100K

10A/10A @ 30VDC Resistive 100K

12A/12A @ 250VAC Resistive/GP 30K

12A/12A @ 30VDC Resistive 30K

3/4 HP @ 480VAC* Motor 6K

1/2 HP @ 240VAC* Motor 6K

1/3 HP @ 120VAC* Motor 6K

48 LRA/10 FLA @ 240VAC* Motor 30K

TV-3 @ 120VAC* Tungsten 25K

A300, 720VA @ 240VAC* Pilot Duty 30K

3 16A/16A @ 250VAC Resistive/GP 50K

20A/20A @ 277VAC Resistive/GP 30K

20A/20A @ 24VDC Resistive 30K

16A/16A @ 30VDC Resistive 30K

1 HP @ 480VAC* Motor 6K

1 HP @ 240VAC* Motor 6K

1/2 HP @ 120VAC* Motor 6K

60 LRA/10 FLA @ 250VAC* Motor 30K

TV-5 @ 120VAC* Tungsten 25K

A300, 720VA @ 240VAC* Pilot Duty 30K

B300, 360VA @ 240VAC** Pilot Duty 30K

5 8A/8A @ 277VAC Resistive/GP 100K

8A/8A @ 30VDC Resistive 100K

10A/10A @ 250VAC Resistive/GP 30K

10A/10A @ 30VDC Resistive 30K

1/2 HP @ 240VAC* Motor 6K

1/4 HP @ 120VAC* Motor 6K

34.8 LRA/6 FLA @ 120VAC* Motor 30K

17.4 LRA/5 FLA @ 240VAC* Motor 30K

B300, 360VA @ 240VAC* Pilot Duty 30K

TV-3 @120VAC* Tungsten 25K

447

P&B

Dimensions are shown for

reference purposes only.

Dimensions are in inches over

(millimeters) unless otherwise

specified.

Catalog 1308242

Issued 3-03 (pdf revised 1-06)

Specifications and availability

subject to change.

www.tycoelectronics.com

Technical support:

Refer to inside back cover.

Typical Part Number BRT B 3 4 012 F

1. Basic Series:

RT = Miniature, printed circuit board relay.

2. Enclosure:

1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1).

2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). C = 1 pole 12A, Pinning 5mm, sealed (Code 2).

3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3).

4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5).

3. Contact Arrangement:

1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.)

2 = 2 Form C (DPDT) (Requires wiring diagram code 5.)

3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.)

4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.)

4. Contact Material:

4 = Silver-nickel 90/10 (standard stock).

5. Coil Voltage:

005 = 5VDC 009 = 9VDC 018 = 18VDC 048 = 48VDC 110 = 110VDC

006 = 6VDC 012 = 12VDC 024 = 24VDC 060 = 60VDC

5. Coil Insulation Classification, Brand and Case Color

F = UL Class F, Potter & Brumfield Brand, Black Case Leave Blank = UL Class F, Schrack Brand, Orange Case

Our authorized distributors are more likely to stock the following items for immediate delivery.

RT114012F

RT114024F

RTB14005F

RTB14012F

RTB14024F

RTB34012F

RTB34024F

RT314012F

RT314024F

RTD14005F

RTD14012F

RTD14024F

RTD34012F

RT424012F

RT424024F

RTE24005F

RTE24012F

RTE24024F

RTE44012F

RTE44024F

Ordering Information (DC Coil Models)

Outline Dimensions

Wiring Diagrams (Bottom View)

.276

(7.0)

.300

(7.62)

.300

(7.62)

.800

(20.32)

.051 DIA.

(1.30)

.800

(20.32)

.400

(10.16)

.051 DIA.

(1.30)

051 DIA.

(1.30)

.051 DIA.

(1.30) .300

(7.62)

.800

(20.32)

.400

(10.16)

.051 DIA.

(1.30)

.051 DIA.

(1.30)

PC Board Layouts (Bottom View)

Breaking Capacity

0.1

0.5

0.1

0.5

10 20 50 100 200 300 10 20 50 100 200 300

DC Voltage DC Voltage

Contact Current

1 Pole 12A 1 Pole 16A 2 Pole 8A

Codes 1 & 2 Code 3 Code 5

1 Pole 12A

3.5mm

1 Pole 16A

2 Pole 8A

5mm

Code 1

1 Pole 2 Pole

A: 1 Contact.

B: 2 Contacts in series.

Contact Life for Resistive AC Load (Typical)

107

0 0.8 1.6 2.4 3.2 4.0

Breaking Capacity (kVA)

Operations

106

105

104

0.4 1.2 2.0 2.8 3.6

A: 8A Model

B: 12A Model

C: 16A Model

Note: Data from 250VAC @ 70°C.

Code 3 & 5

.62

(15.7)

.50

(12.7)

1.1 4

(29)

6X .031 X .020

(.80 X .52)

2X .020 X .020

(.52 X .52)

.17

(4.3)

A: 16A Version.

B: 12A Version.

Notes: 1. On single throw models, only necessary terminals are present.

2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1

in (2.5 - 2.54 mm) can be used.

Note: On single throw models, only necessary terminals are present.

1 Pole 12A

5mm

Code 2