E-8 APEMwww.apem.com
E
G series
Slide switches - telecom grade
Distinctive features and specifications
MATERIALS
• Case : PES
• Actuator : polyamide, glass
filled
• Cover : stainless steel
• Contacts
0: brass, gold plated
1: silver
2: silver, gold plated
5: special contact, lower
rating, minimum quantity :
consult factory
• Terminal seal : epoxy
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- silver contacts (codes 1 or 2) : 3A 30VDC
- gold plated brass contacts (code 0) : 0,4VA 20VAC or DC max.
• Initial contact resistance : 10 mΩ
• Insulation resistance : 1.000 MΩmin.
• Dielectric strength : 1.000 Vrms 50 Hz min.
• Electrical life with resistive load :
- silver contacts (codes 1 or 2) : 2 positions : 40.000 cycles
3 positions : 20.000 cycles
- gold plated brass contacts (code 0) : 60.000 cycles (0,4VA max.)
GENERAL SPECIFICATIONS
• Travel : 2,20 mm (.086), except actuator N on SP model : 2,60 mm (.102)
• Operating temperature : -30°C to +85°C
• Recommended soldering : 300°C 5 sec. max.
❑Panel and PC mount models
❑6 actuator lengths
❑Wide variety of contact materials
The company reserves the right to change specifications without notice.
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page8
UG1410A
APEM www.apem.com E-9
E
G series
Slide switches - telecom grade
Overview
G
SERIES
Actuators
C3,50 mm (.137)
H5,10 mm (.200)
Standard
L6,40 mm (.251)
B7,65 mm (.301)
E9,10 mm (.358)
N9,50 mm (.374)
Types L, B and E for
single pole models only.
Electrical functions
6ON - ON
9ON OFF ON
Terminals
S0 Solder lugs
P0 Straight PC
W0 Right angle, horizontal
WW Right angle, vertical
Y0 Straight PC with short
bracket
Y4 Straight PC with tall
bracket
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Packaging unit : 100 pieces for SP solder lug (S0) and straight terminal (P0) models.
50 pieces for other models.
Special options 2
00 No epoxy seal
01 Epoxy sealed
terminals
10 Extended terminals
11 Same as 10, with
epoxy seal
Contact and terminal
materials
0Brass, gold plated
1Silver
2Silver, gold plated
5Special contact, lower
rating
Special options 1
00 Standard model
10 Switch without ground
plate
11 10,35 mm (.407)
PC terminals
12 Same as 11, without
ground plate
Number
of poles
3Single pole
4Double pole
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page9
E-10 APEMwww.apem.com
E
G series
Slide switches - telecom grade
Right angle terminals - horizontal
Solder lug terminals
MODEL
STRUCTURE
Single pole Double pole
GH36S0 GH46S0 ON - ON
GH39S0 GH49S0 ON OFF ON
Straight PC terminals
Single pole Double pole
GH36P0 GH46P0 ON - ON
GH39P0 GH49P0 ON OFF ON
Single pole Double pole
GH36W0 GH46W0 ON - ON
GH39W0 GH49W0 ON OFF ON
•Solder lug, straight PC or right angle terminals
• Single and double pole configurations
Shown with standard actuator (type H)
1 2 3
(.070)
(.043)
(.165)
(.074)
4.20
1.90
1.80
1.10
(.232)
(.157)
5.90
4.00
(.043)
1.10
19.50
(.767)
17.53
(.690)
3.85
(.151)
11.40
(.448)
5.10
(.200)
0.30
(.011)
3.85
(.151)
10.55
(.415)
7.60
(.299)
4.40
(.173)
4.70
(.185)
0.30 6.65
2.40
6.10
5.10
4.20 6.35
19.50
17.53
3.85
0.80
0.50
12.70
3.85
5.80
(.228)
(.500)
(.151)
(.011)
(.200)
(.019)
(.031)
(.165) (.250)
(.151)
(.767)
(.690)
(.261)
(.094)
(.240)
(.240)
(.094)
6.10
2.40
(.031)
(.019)
(.500)
12.70
0.50
0.80
(.185)
4.70
(.261)
(.151)
3.85
6.65
(.043)
(.062 DIA)
(.185)
1.10
4.70
Ø1.60
(.157) (.324)
8.254.00
4.70
(.185)
Ø1.60
(.062 DIA)
1.10
(.043)
3.85
(.151)
3.85
(.151)
0.80
(.031)
4.70
(.185)
0.50
(.019)
12.70
(.500)
4.75
(.187)
4.00
(.157)
9.50
(.374)
5.10
(.200)
11.40
(.448)
4.70
(.185)
(.185)
4.70
(.019)
0.50
(.185)
4.70
(.031)
0.80
(.500)
12.70
(.151)
3.85
(.200)
5.10
(.151)
(.046)
(.051)
(.019)
(.031)
(.151)
(.185)
(.375)
(.185)
(.519)
(.062 DIA)
(.535)
(.169)
(.185)
4.70
1.17
1.30
Ø1.60
9.53
4.70
13.20
0.80
0.50
4.70
3.85
13.60
3.85
4.30
9.53
(.375)
(.129)
3.30
0.50
0.80
(.031)
(.019)
13.60
3.85
(.535)
(.151)
4.70
(.185)
13.20
(.519)
(.185)
4.70
Ø1.60
(.062 DIA)
12.70
(.500)(.150)
3.81
(.500)
12.70
3.85
(.151)
5.70
(.224)
3.10
(.122)
Order with epoxy sealed terminals (option 01).
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page10
APEM www.apem.com E-11
E
G series
Slide switches - telecom grade
PANEL CUT-OUT
Solder lug
model
Straight PC terminals - tall bracket : Y4
Straight PC terminals - short bracket : Y0
Right angle terminals - vertical
Single pole Double pole
GH36WW GH46WW ON - ON
GH39WW GH49WW ON OFF ON
Single pole Double pole
GH36Y0 GH46Y0 ON - ON
GH39Y0 GH49Y0 ON OFF ON
Single pole Double pole
GH36Y4 GH46Y4 ON - ON
GH39Y4 GH49Y4 ON OFF ON
PCB MOUNTING
(.295)
(.151) (.151)
(.537)
(.185)
(.125)
(.185)
(.019)
(.031)
(.620)
(.185)
(.125)
3.85 3.85
3.18
0.50
0.80
15.75
4.70
7.50
13.65
4.70
4.70
3.18
(.062 DIA)
Ø1.60
(.015)
0.40
3.85
(.151)
4.70
(.185)
(.015)
15.75
0.80
0.50
(.620)
(.031)
(.019)
0.40
11.40
3.85
(.151)
(.448)
7.50
(.295)
4.75
(.187)
15.75
(.620)
(.125)
3.18
(.620)
15.75
4.70
(.185)
4.70
(.185)
14.90
(.586)
Ø1.60
(.062 DIA)
(.295)
(.151) (.151)
(.362)
(.185)
(.125)
(.185)
(.019)
(.031)
(.620)
(.185)
(.125)
3.85 3.85
3.18
0.50
0.80
15.75
4.70
7.50
9.20
4.70
4.70
3.18
(.062 DIA)
Ø1.60
(.015)
0.40
3.85
(.151)
4.70
(.185)
(.015)
15.75
0.80
0.50
(.620)
(.031)
(.019)
0.40
11.40
3.85
(.151)
(.448)
7.50
(.295)
4.75
(.187)
15.75
(.620)
(.125)
3.18
(.620)
15.75
4.70
(.185)
4.70
(.185)
10.46
(.411)
Ø1.60
(.062 DIA)
(.151)
(.043)
(.261)
(.500)
(.151)
(.400)
(.185)
(.150)
(.175)
(.400)
(.110)
1.10
3.85
12.70
2.80
3.85
10.16
3.81
6.65
4.70
10.16
4.45
(.062 DIA)
Ø1.60
6.35
(.250)
3.85
(.151)
12.70
(.500)
(.250)
6.35
4.70
(.185)
3.85
(.151)
(.187)
4.75
(.187)
4.75
(.150)
3.81
(.500)
12.70
(.448)
11.40
(.500)
12.70
(.110)
2.80
Ø1.60
(.062 DIA)
(.324)
8.25
9.50
(.374)
(.129)
3.30
5.70
(.224)
(.500)
12.70
6.35
(.250)
(.362)
9.20
10.46
(.411)
(.537)
13.65
14.90
(.586)
6.65
(.261)
11.40
(.448)
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page11
E-12 APEMwww.apem.com
E
G series
Slide switches - telecom grade
CONTACT AND TERMINAL MATERIALS
0Brass, gold plated
1Silver
2Silver, gold plated
5Special contact, lower rating, minimum quantity : consult factory
ACTUATORS
G H ....
Dimensions below are for solder lug (S0) and straight terminals (P0) models.
For other models (WO - WW - Y0 - Y4), height is less 0,4 mm (.015).
Replace second digit (H) of basic model number with
one of the codes below.
H
E
L
NB
C
Standard For single pole only
For single pole only For single pole only
(.137)
3.50
(.301)
7.65
(.358)
9.10
9.50
(.374)
(.200)
5.10
(.251)
6.40
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page12
APEM www.apem.com E-13
E
G series
Slide switches - telecom grade
SPECIAL OPTIONS 1
00 Standard switch as presented under "Model Structure"
10 Switch without ground plate
For right angle only (W0 and WW models)
11 10,35 mm (.407) long PC terminals
12 10,35 mm (.407) long PC terminals without ground plate
10
11
12
SPECIAL OPTIONS 2
00 No epoxy seal
01 Epoxy sealed terminals
(compulsory on solder lug models)
10 Extended terminals
For vertical right angle (WW models)
11 Extended terminals as above, with epoxy seal
10
11
10.35
(.407)
(.850)
21.60
EPOXY
(.407)
10.35
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page13
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
GB36W000001 GB36W010001 GC36S010001 GE36P000001 GH46P011201 GL36W000001 GH36P000001
GH36P010001 GH36S000001 GH36S010001 GH36W000001 GH36W010001 GH36WW00001 GH36WW10001
GH36Y000001 GH36Y010001 GH36Y400001 GH36Y410001 GH39P000001 GH39P010001 GH39S000001
GH39S010001 GH39W000001 GH39WW00001 GH39WW10001 GH39Y010001 GH39Y400001 GH46P000001
GH46P010001 GH46S010001 GH46W000001 GH46W010001 GH46WW00001 GH46WW10001 GH49P010001
GH49S010001 GH49W000001 GH49WW00001