Small dimensions Insulated face ends Versions with special dimensions can be supplied at short notice Construction B 32 510 ... B 32 512 Cut surfaces Metallized Polyester Film Capacitors (MKT) Partially Coated (Silver Blue Caps) Dielectric: polyethylene terephthalate (polyester) Stacked-film technology Insulated face ends Dimensions in mm Features Special dimensions available upon request High pulse strength Coating material covers the leads for a length of 0,8 mm from the capacitor body Typical applications Lead spacing 0,4 7,5 10,0 15,0 Diameter d1 Type 0,5 0,5 0,6 B 32 510 B 32 511 B 32 512 Terminals Parallel wire leads, tinned Also available with (3,0 0,5) mm lead length upon request Taped versions also available with crimped leads Marking Rated capacitance (coded), rated dc voltage Delivery mode Bulk (untaped) Taped, with straight leads or crimped leads (Ammo pack or reel) Capacitors with 7,5 mm lead spacings (taped versions) can be supplied with leads bent to fit 5 mm grids. For notes on taping, refer to page 279. Detail specification Homologated in accordance with CECC 30 401-007 Notes on mounting When mounting these capacitors, take into account creepage distances and clearances to adjacent live parts. The insulating strength of the cut surfaces to other live parts of the circuit is 1,5 times the capacitor's rated dc voltage, but is always at least 300 Vdc. 42 Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 Standard applications Lamp ballast circuits Energy-saving lamps MKT Overview of available types 10 mm B 32 511 46 15 mm B 32 512 47 Siemens Matsushita Components 250 Vdc 100 Vdc 100 Vdc 400 Vdc 250 Vdc 250 Vdc 400 Vdc 400 Vdc 7,5 mm B 32 510 44 100 Vdc Lead spacing Type Page 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 F 0,15 F 0,22 F 0,33 F 0,47 F 0,68 F 1,0 F 1,5 F 2,2 F 3,3 F 4,7 F 6,8 F 10 F 63 Vdc /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 B 32 510 ... B 32 512 43 B 32 510 MKT 7,5 Ordering codes and packing units, lead spacing 7,5 mm CR 63 Vdc (40 Vac) 0,22 F 0,33 F 0,47 F 0,68 F 1,0 F 1,5 F 2,2 F 0,10 F 0,15 F 0,22 F 0,33 F 0,47 F 0,68 F 1,0 F 1,5 F 33 nF 47 nF 68 nF 0,10 F 0,15 F 0,22 F 0,33 F 100 Vdc (63 Vac) 250 Vdc (160 Vac) Maximum dimensions b x h x l (mm) 2,6 x 3,0 x 3,4 x 4,0 x 4,8 x 5,9 x 7,3 x 3,0 x 3,0 x 3,0 x 3,5 x 4,2 x 5,0 x 6,3 x 7,5 x 3,0 x 3,0 x 3,4 x 4,0 x 4,7 x 5,7 x 7,2 x 6,4 x 10,0 6,8 x 10,0 7,0 x 10,0 7,4 x 10,0 8,0 x 10,0 8,8 x 10,0 9,4 x 10,0 5,9 x 10,0 5,9 x 10,0 6,3 x 10,0 6,9 x 10,0 7,3 x 10,0 7,7 x 10,0 8,2 x 10,0 9,4 x 10,0 6,0 x 10,0 6,4 x 10,0 6,9 x 10,0 7,3 x 10,0 8,2 x 10,0 8,7 x 10,0 9,4 x 10,0 Ordering code1) B32510-J224-+*** B32510-J334-+*** B32510-J474-+*** B32510-J684-+*** B32510-J105-+*** B32510-J155-+*** B32510-J225-+*** B32510-J1104-+*** B32510-J1154-+*** B32510-J1224-+*** B32510-J1334-+*** B32510-J1474-+*** B32510-J1684-+*** B32510-J1105-+*** B32510-J1155-+*** B32510-J3333-+*** B32510-J3473-+*** B32510-J3683-+*** B32510-J3104-+*** B32510-J3154-+*** B32510-J3224-+*** B32510-J3334-+*** Packing units (pcs) Ammo Reel pack 3550 2700 3150 2400 2820 2200 2550 2000 2050 1600 1570 1200 1220 1000 3550 2700 3400 2600 2900 2300 2700 2100 2270 1800 1850 1500 1450 1200 1170 900 3550 2700 3020 2300 2900 2300 2400 1900 2000 1600 1600 1300 1220 1000 Untaped 3000 3000 2500 2000 1500 1000 1000 3000 3000 3000 2500 2000 1500 1000 800 3000 3000 2500 2000 1500 1000 800 1) For instructions on how to determine the ordering code, see next page. 44 Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 VR (Vrms, f 60 Hz) /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 B 32 510 MKT 7,5 Ordering codes and packing units, lead spacing 7,5 mm VR (Vrms, f 60 Hz) CR 400 Vdc (200 Vac) 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 F 0,15 F Maximum dimensions b x h x l (mm) Ordering code1) 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,0 x 6,7 x 10,0 3,4 x 7,2 x 10,0 4,0 x 7,7 x 10,0 4,6 x 8,5 x 10,0 5,7 x 8,9 x 10,0 7,3 x 9,4 x 10,0 B32510-J6102-+*** B32510-J6152-+*** B32510-J6222-+*** B32510-J6332-+*** B32510-J6472-+*** B32510-J6682-+*** B32510-J6103-+*** B32510-J6153-+*** B32510-J6223-+*** B32510-J6333-+*** B32510-J6473-+*** B32510-J6683-+*** B32510-J6104-+*** B32510-J6154-+*** Packing units (pcs) Ammo Reel pack - - 3000 2300 3150 2400 2970 2300 3150 2400 3150 2400 3000 2300 3000 2300 2900 2300 2900 2300 2400 1900 2100 1600 1600 1300 1220 1000 Untaped 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2000 1500 1000 800 Capacitance tolerance: 20 % = M, 10 % = K, 5 % = J Special dimensions available upon request. For corresponding design rules, refer to page 238. 1) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required packing: - For straight leads: Ammo pack = 289, reel = 189 - For crimped leads: Ammo pack = 249, reel = 149 - Lead spacing changed from 7,5 to 5 mm by bending leads: Ammo pack = 259, reel = 159 The ordering code for untaped components ends after the tolerance code letter. Siemens Matsushita Components 45 /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 MKT B 32 511 10 Ordering codes and packing units, lead spacing 10 mm VR CR (Vrms, f 60 Hz) Maximum dimensions b x h x l (mm) Ordering code1) 0,33 F 0,47 F 0,68 F 1,0 F 1,5 F 2,2 F 250 Vdc 47 nF (160 Vac) 68 nF 0,10 F 0,15 F 0,22 F 0,33 F 0,47 F 400 Vdc 10 nF (200 Vac) 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 F 0,15 F 0,22 F 3,3 x 6,4 x 12,5 3,7 x 7,0 x 12,5 4,4 x 7,5 x 12,5 5,3 x 8,1 x 12,5 6,4 x 9,0 x 12,5 7,7 x 10,2 x 12,5 3,2 x 5,6 x 12,5 3,2 x 6,0 x 12,5 3,6 x 6,5 x 12,5 4,1 x 7,2 x 12,5 5,0 x 7,8 x 12,5 6,0 x 8,7 x 12,5 7,1 x 9,7 x 12,5 3,2 x 6,3 x 12,5 3,2 x 6,3 x 12,5 3,2 x 6,3 x 12,5 3,2 x 6,3 x 12,5 3,4 x 7,2 x 12,5 4,0 x 7,8 x 12,5 4,8 x 8,1 x 12,5 6,0 x 8,9 x 12,5 7,4 x 9,7 x 12,5 B32511-J1334-+*** B32511-J1474-+*** B32511-J1684-+*** B32511-J1105-+*** B32511-J1155-+*** B32511-J1225-+*** B32511-J3473-+*** B32511-J3683-+*** B32511-J3104-+*** B32511-J3154-+*** B32511-J3224-+*** B32511-J3334-+*** B32511-J3474-+*** B32511-J6103-+*** B32511-J6153-+*** B32511-J6223-+*** B32511-J6333-+*** B32511-J6473-+*** B32511-J6683-+*** B32511-J6104-+*** B32511-J6154-+*** B32511-J6224-+*** 100 Vdc (63 Vac) Packing units (pcs) Ammo Reel pack 1460 2100 1320 2000 1100 1700 920 1400 750 1100 610 900 1760 2400 1490 2200 1360 2000 1140 1700 930 1400 760 1200 630 900 1460 2100 1630 2300 1520 2200 1460 2100 1460 2100 1200 1800 980 1400 760 1200 610 900 Untaped 2200 2000 1500 1000 800 500 2900 2500 2000 1500 1000 800 500 2500 2500 2500 2500 2000 1500 1000 800 500 Capacitance tolerance: 20 % = M, 10 % = K, 5 % = J Special dimensions available upon request. For corresponding design rules, refer to page 238. 1) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required packing form: - For straight leads: Ammo pack = 289, reel = 189 - For crimped leads: Ammo pack = 249, reel = 149 The ordering code for untaped components ends after the tolerance code letter. 46 Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 B 32 512 MKT 15 Ordering codes and packing units, lead spacing 15 mm VR (Vrms, f 60 Hz) CR 100 Vdc (63 Vac) 1,0 F 1,5 F 2,2 F 3,3 F 4,7 F 6,8 F 10 F 0,22 F 0,33 F 0,47 F 0,68 F 1,0 F 1,5 F 2,2 F 3,3 F 22 nF 33 nF 47 nF 68 nF 0,10 F 0,15 F 0,22 F 0,33 F 0,47 F 0,68 F 1,0 F 250 Vdc (160 Vac) 400 Vdc (200 Vac) Maximum dimensions b x h x l (mm) Ordering code1) 4,2 x 7,5 x 17,5 5,0 x 8,5 x 17,5 5,9 x 9,2 x 17,5 7,0 x 10,5 x 17,5 8,3 x 11,8 x 17,5 10,0 x 13,0 x 17,5 12,8 x 14,2 x 17,5 4,2 x 6,8 x 17,5 5,0 x 7,4 x 17,5 6,0 x 7,9 x 17,5 7,0 x 9,0 x 17,5 8,0 x 10,5 x 17,5 9,7 x 12,2 x 17,5 11,7 x 14,0 x 17,5 14,9 x 15,7 x 17,5 4,3 x 6,8 x 17,5 4,3 x 6,8 x 17,5 4,3 x 6,8 x 17,5 4,3 x 6,8 x 17,5 4,3 x 6,8 x 17,5 4,9 x 7,7 x 17,5 5,7 x 8,7 x 17,5 7,0 x 9,5 x 17,5 8,3 x 10,5 x 17,5 9,9 x 12,0 x 17,5 11,9 x 13,7 x 17,5 B32512-J1105-+*** B32512-J1155-+*** B32512-J1225-+*** B32512-J1335-+*** B32512-J1475-+*** B32512-J1685-+*** B32512-J1106-+*** B32512-J3224-+*** B32512-J3334-+*** B32512-J3474-+*** B32512-J3684-+*** B32512-J3105-+*** B32512-J3155-+*** B32512-J3225-+*** B32512-J3335-+*** B32512-J6223-+*** B32512-J6333-+*** B32512-J6473-+*** B32512-J6683-+*** B32512-J6104-+*** B32512-J6154-+*** B32512-J6224-+*** B32512-J6334-+*** B32512-J6474-+*** B32512-J6684-+*** B32512-J6105-+*** Packing units (pcs) Ammo Reel pack 1450 1600 1200 1300 1000 1100 850 900 700 850 590 600 450 500 1450 1600 1200 1300 1000 1100 850 900 740 800 600 600 500 500 390 400 1450 1500 1450 1500 1500 1600 1500 1600 1400 1500 1250 1300 1050 1100 850 900 700 800 590 600 490 500 Untaped 900 650 500 400 300 200 150 1000 800 600 450 350 250 150 100 1000 1000 1000 1000 1000 700 500 400 300 150 150 Capacitance tolerance: 20 % = M, 10 % = K, 5 % = J Special dimensions available upon request. For corresponding design rules, refer to page 238. 1) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required packing:. - For straight leads: Ammo pack = 289, reel = 189 - For crimped leads: Ammo pack = 249, reel = 149 The ordering code for untaped components ends after the tolerance code letter. Siemens Matsushita Components 47 B 32 510 ... B 32 512 MKT Technical data Reliability: Reference conditions Failure rate Service life Failure criteria: Total failure Failure due to variation of parameters DC test voltage Category voltage VC Operation with dc voltage or ac voltage Vrms up to 60 Hz Category voltage for short operating periods Dissipation factor tan (in 10-3) at 20 C (upper limit values) Insulation resistance Ris or time constant = CR Ris at 20 C, rel. humidity 65 % (minimum as-delivered values) 55/100/561) - 55 C + 100 C 56 days/40 C/93 % relative humidity Capacitance change |C/C| 5% Dissipation factor change tan 3 10-3 (at 1 kHz) 5 10-3 (at 10 kHz) Insulation resistance Ris 50 % of minimum or time constant = CR Ris as-delivered values 0,5 VR; 40 C 2 10-9/h = 2 fit For a conversion table for other operating conditions and temperatures, refer to page 276. 200 000 h Short circuit or open circuit Capacitance change |C/C| > 10 % Dissipation factor tan > 2 upper limit value Insulation resistance Ris < 150 M (CR 0,33 F) or time constant = CR Ris < 50 s (CR > 0,33 F) 1,4 VR, 2 s T 85 C: VC = 1,0 VR or 1,0 Vrms T 100 C: VC = 0,8 VR or 0,8 Vrms T 100 C: VC = 1,25 VR or 1,0 Vrms for max. 2000 h T 125 C: VC = 0,5 VR or 0,5 Vrms for max. 1000 h at 1 kHz 10 kHz 100 kHz VR 100 Vdc 250 Vdc CR 0,1 F 0,1 F < CR 1 F 8 8 15 15 30 - CR 0,33 F 3750 M 7500 M CR > 1 F 10 - - CR > 0,33 F 1250 s 2500 s 1) According to CECC 30401-007, test criteria must be met after exposure to damp heat for 21 days. 48 Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 Climatic category in accordance with IEC 68-1 Lower category temperature Tmin Upper category temperature Tmax Damp heat test Limit values after damp heat test1) /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 B 32 510 ... B 32 512 MKT Impedance Z versus frequency f (typical values) Pulse handling capability Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth) VR 63 Vdc 100 Vdc 250 Vdc 400 Vdc Max. rate of voltage rise Vpp/ in V/s (for Vpp = VR) Lead spacing 7,5 mm 10 mm 120 - 150 75 200 150 275 175 15 mm - 50 100 125 For Vpp < VR , the permissible voltage rise rate value Vpp/ may be multiplied by the factor VR/Vpp. Also refer to the calculation example on page 250. VR 63 Vdc 100 Vdc 250 Vdc 400 Vdc Pulse characteristic k0 in V2/s (for Vpp VR) Lead spacing 7,5 mm 10 mm 15 000 - 30 000 15 000 100 000 75 000 220 000 140 000 Siemens Matsushita Components 15 mm - 10 000 50 000 100 000 49 MKT B 32 510 7,5 Permissible ac voltage Vrms versus frequency f Lead spacing 7,5 mm 100 Vdc/ 63 Vac Vac Vac Vrms Vrms 250 Vdc/ 160 Vac 400 Vdc/ 200 Vac Vac Vrms 50 Vac Vrms Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 63 Vdc/ 40 Vac /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 B 32 511 MKT 10 Permissible ac voltage Vrms versus frequency f Lead spacing 10 mm 100 Vdc/ 63 Vac 250 Vdc/ 160 Vac Vac Vrms Vac Vrms 400 Vdc/ 200 Vac Vac Vrms Siemens Matsushita Components 51 MKT B 32 512 15 Permissible ac voltage Vrms versus frequency f Lead spacing 15 mm 100 Vdc/ 63 Vac 250 Vdc/ 160 Vac Vac Vac Vrms /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512 Vrms 400 Vdc/ 200 Vac Vac Vrms 52 Siemens Matsushita Components