42 Siemens Matsushita Components
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
Small dimensions
Insulated face ends
Versions with special dimensions
can be supplied at short notice
Construction
Dielectric: polyethylene terephthalate
(polyester)
Stacked-film technology
Insulated face ends
Features
Special dimensions available upon request
High pulse strength
Coating material covers the leads for a
length of 0,8 mm from the capacitor body
Typical applications
Standard applications
Lamp ballast circuits
Energy-saving lamps
Terminals
Parallel wire leads, tinned
Also available with (3,0 ±0,5) mm lead length upon request
Taped versions also available with crimped leads
Marking
Rated capacitance (coded),
rated dc voltage
Delivery mode
Bulk (untaped)
Taped, with straight leads or crimped leads (Ammo pack or reel)
Capacitors with 7,5 mm lead spacings (taped versions) can be supplied with leads bent to fit
5 mm grids.
For notes on taping, refer to page 279.
Detail specification
Homologated in accordance with CECC 30 401-007
Notes on mounting
When mounting these capacitors, take into account creepage distances and clearances to adjacent
live parts. The insulating strength of the cut surfaces to other live parts of the circuit is 1,5 times the
capacitor’s rated dc voltage, but is always at least 300 Vdc.
Dimensions in mm
Lead spacing
±0,4 Diameter
d
1Type
7,5 0,5 B 32 510
10,0 0,5 B 32 511
15,0 0,6 B 32 512
Cut
surfaces
Metallized Polyester Film Capacitors (MKT)
Partially Coated (Silver Blue Caps) B 32 510 … B 32 512
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
Siemens Matsushita Components 43
MKT
Overview of available types
Lead spacing 7,5 mm 10 mm 15 mm
Type B 32 510 B 32 511 B 32 512
Page 44 46 47
1,0 nF
400 Vdc
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
400 Vdc
15 nF
22 nF
400 Vdc
33 nF
250 Vdc
47 nF
250 Vdc
68 nF
0,10 µF
100 Vdc
0,15 µF
0,22 µF
63 Vdc
250 Vdc
0,33 µF
100 Vdc
0,47 µF
0,68 µF
1,0 µF
100 Vdc
1,5 µF
2,2 µF
3,3 µF
4,7 µF
6,8 µF
10 µF
B 32 510 … B 32 512
44 Siemens Matsushita Components
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
MKT
7,5
Ordering codes and packing units, lead spacing 7,5 mm
V
R
(
V
rms,
f
60 Hz)
C
RMaximum
dimensions
b
×
h
×
l
(mm)
Ordering code1) Packing units (pcs)
Ammo
pack Reel Untaped
63 Vdc
(40 Vac) 0,22 µF 2,6 × 6,4 × 10,0 B32510-J224-+*** 3550 2700 3000
0,33 µF 3,0 × 6,8 × 10,0 B32510-J334-+*** 3150 2400 3000
0,47 µF 3,4 × 7,0 × 10,0 B32510-J474-+*** 2820 2200 2500
0,68 µF 4,0 × 7,4 × 10,0 B32510-J684-+*** 2550 2000 2000
1,0 µF 4,8 × 8,0 × 10,0 B32510-J105-+*** 2050 1600 1500
1,5 µF 5,9 × 8,8 × 10,0 B32510-J155-+*** 1570 1200 1000
2,2 µF 7,3 × 9,4 × 10,0 B32510-J225-+*** 1220 1000 1000
100 Vdc
(63 Vac) 0,10 µF 3,0 × 5,9 × 10,0 B32510-J1104-+*** 3550 2700 3000
0,15 µF 3,0 × 5,9 × 10,0 B32510-J1154-+*** 3400 2600 3000
0,22 µF 3,0 × 6,3 × 10,0 B32510-J1224-+*** 2900 2300 3000
0,33 µF 3,5 × 6,9 × 10,0 B32510-J1334-+*** 2700 2100 2500
0,47 µF 4,2 × 7,3 × 10,0 B32510-J1474-+*** 2270 1800 2000
0,68 µF 5,0 × 7,7 × 10,0 B32510-J1684-+*** 1850 1500 1500
1,0 µF 6,3 × 8,2 × 10,0 B32510-J1105-+*** 1450 1200 1000
1,5 µF 7,5 × 9,4 × 10,0 B32510-J1155-+*** 1170 900 800
250 Vdc
(160 Vac) 33 nF 3,0 × 6,0 × 10,0 B32510-J3333-+*** 3550 2700 3000
47 nF 3,0 × 6,4 × 10,0 B32510-J3473-+*** 3020 2300 3000
68 nF 3,4 × 6,9 × 10,0 B32510-J3683-+*** 2900 2300 2500
0,10 µF 4,0 × 7,3 × 10,0 B32510-J3104-+*** 2400 1900 2000
0,15 µF 4,7 × 8,2 × 10,0 B32510-J3154-+*** 2000 1600 1500
0,22 µF 5,7 × 8,7 × 10,0 B32510-J3224-+*** 1600 1300 1000
0,33 µF 7,2 × 9,4 × 10,0 B32510-J3334-+*** 1220 1000 800
1) For instructions on how to determine the ordering code, see next page.
B 32 510
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
Siemens Matsushita Components 45
MKT
7,5
Capacitance tolerance: ±20 % =ˆ M, ±10 % =ˆ K, ±5 % =ˆ J
Special dimensions available upon request. For corresponding design rules, refer to page 238.
400 Vdc
(200 Vac) 1,0 nF 3,0 × 6,7 × 10,0 B32510-J6102-+*** 3000
1,5 nF 3,0 × 6,7 × 10,0 B32510-J6152-+*** 3000 2300 3000
2,2 nF 3,0 × 6,7 × 10,0 B32510-J6222-+*** 3150 2400 3000
3,3 nF 3,0 × 6,7 × 10,0 B32510-J6332-+*** 2970 2300 3000
4,7 nF 3,0 × 6,7 × 10,0 B32510-J6472-+*** 3150 2400 3000
6,8 nF 3,0 × 6,7 × 10,0 B32510-J6682-+*** 3150 2400 3000
10 nF 3,0 × 6,7 × 10,0 B32510-J6103-+*** 3000 2300 3000
15 nF 3,0 × 6,7 × 10,0 B32510-J6153-+*** 3000 2300 3000
22 nF 3,0 × 6,7 × 10,0 B32510-J6223-+*** 2900 2300 3000
33 nF 3,4 × 7,2 × 10,0 B32510-J6333-+*** 2900 2300 2500
47 nF 4,0 × 7,7 × 10,0 B32510-J6473-+*** 2400 1900 2000
68 nF 4,6 × 8,5 × 10,0 B32510-J6683-+*** 2100 1600 1500
0,10 µF 5,7 × 8,9 × 10,0 B32510-J6104-+*** 1600 1300 1000
0,15 µF 7,3 × 9,4 × 10,0 B32510-J6154-+*** 1220 1000 800
Ordering codes and packing units, lead spacing 7,5 mm
V
R
(
V
rms,
f
60 Hz)
C
RMaximum
dimensions
b
×
h
×
l
(mm)
Ordering code1) Packing units (pcs)
Ammo
pack Reel Untaped
1) Replace the + by the code letter for the required capacitance tolerance.
Replace the *** by the code number for the required packing:
- For straight leads: Ammo pack = 289, reel = 189
- For crimped leads: Ammo pack = 249, reel = 149
- Lead spacing changed from 7,5 to 5 mm by bending leads: Ammo pack = 259, reel = 159
The ordering code for untaped components ends after the tolerance code letter.
B 32 510
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
46 Siemens Matsushita Components
MKT
10
Capacitance tolerance: ±20 % =ˆ M, ±10 % =ˆ K, ±5 % =ˆ J
Special dimensions available upon request. For corresponding design rules, refer to page 238.
Ordering codes and packing units, lead spacing 10 mm
V
R
(
V
rms,
f
60 Hz)
C
RMaximum
dimensions
b
×
h
×
l
(mm)
Ordering code1) Packing units (pcs)
Ammo
pack Reel Untaped
100 Vdc
(63 Vac) 0,33 µF 3,3 × 6,4 × 12,5 B32511-J1334-+*** 1460 2100 2200
0,47 µF 3,7 × 7,0 × 12,5 B32511-J1474-+*** 1320 2000 2000
0,68 µF 4,4 × 7,5 × 12,5 B32511-J1684-+*** 1100 1700 1500
1,0 µF 5,3 × 8,1 × 12,5 B32511-J1105-+*** 920 1400 1000
1,5 µF 6,4 × 9,0 × 12,5 B32511-J1155-+*** 750 1100 800
2,2 µF 7,7 × 10,2 × 12,5 B32511-J1225-+*** 610 900 500
250 Vdc
(160 Vac) 47 nF 3,2 × 5,6 × 12,5 B32511-J3473-+*** 1760 2400 2900
68 nF 3,2 × 6,0 × 12,5 B32511-J3683-+*** 1490 2200 2500
0,10 µF 3,6 × 6,5 × 12,5 B32511-J3104-+*** 1360 2000 2000
0,15 µF 4,1 × 7,2 × 12,5 B32511-J3154-+*** 1140 1700 1500
0,22 µF 5,0 × 7,8 × 12,5 B32511-J3224-+*** 930 1400 1000
0,33 µF 6,0 × 8,7 × 12,5 B32511-J3334-+*** 760 1200 800
0,47 µF 7,1 × 9,7 × 12,5 B32511-J3474-+*** 630 900 500
400 Vdc
(200 Vac) 10 nF 3,2 × 6,3 × 12,5 B32511-J6103-+*** 1460 2100 2500
15 nF 3,2 × 6,3 × 12,5 B32511-J6153-+*** 1630 2300 2500
22 nF 3,2 × 6,3 × 12,5 B32511-J6223-+*** 1520 2200 2500
33 nF 3,2 × 6,3 × 12,5 B32511-J6333-+*** 1460 2100 2500
47 nF 3,4 × 7,2 × 12,5 B32511-J6473-+*** 1460 2100 2000
68 nF 4,0 × 7,8 × 12,5 B32511-J6683-+*** 1200 1800 1500
0,10 µF 4,8 × 8,1 × 12,5 B32511-J6104-+*** 980 1400 1000
0,15 µF 6,0 × 8,9 × 12,5 B32511-J6154-+*** 760 1200 800
0,22 µF 7,4 × 9,7 × 12,5 B32511-J6224-+*** 610 900 500
1) Replace the + by the code letter for the required capacitance tolerance.
Replace the *** by the code number for the required packing form:
- For straight leads: Ammo pack = 289, reel = 189
- For crimped leads: Ammo pack = 249, reel = 149
The ordering code for untaped components ends after the tolerance code letter.
B 32 511
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
Siemens Matsushita Components 47
MKT
15
Capacitance tolerance: ±20 % =ˆ M, ±10 % =ˆ K, ±5 % =ˆ J
Special dimensions available upon request. For corresponding design rules, refer to page 238.
Ordering codes and packing units, lead spacing 15 mm
V
R
(
V
rms,
f
60 Hz)
C
RMaximum
dimensions
b
×
h
×
l
(mm)
Ordering code1) Packing units (pcs)
Ammo
pack Reel Untaped
100 Vdc
(63 Vac) 1,0 µF 4,2 × 7,5 × 17,5 B32512-J1105-+*** 1450 1600 900
1,5 µF 5,0 × 8,5 × 17,5 B32512-J1155-+*** 1200 1300 650
2,2 µF 5,9 × 9,2 × 17,5 B32512-J1225-+*** 1000 1100 500
3,3 µF 7,0 × 10,5 × 17,5 B32512-J1335-+*** 850 900 400
4,7 µF 8,3 × 11,8 × 17,5 B32512-J1475-+*** 700 850 300
6,8 µF 10,0 × 13,0 × 17,5 B32512-J1685-+*** 590 600 200
10 µF 12,8 × 14,2 × 17,5 B32512-J1106-+*** 450 500 150
250 Vdc
(160 Vac) 0,22 µF 4,2 × 6,8 × 17,5 B32512-J3224-+*** 1450 1600 1000
0,33 µF 5,0 × 7,4 × 17,5 B32512-J3334-+*** 1200 1300 800
0,47 µF 6,0 × 7,9 × 17,5 B32512-J3474-+*** 1000 1100 600
0,68 µF 7,0 × 9,0 × 17,5 B32512-J3684-+*** 850 900 450
1,0 µF 8,0 × 10,5 × 17,5 B32512-J3105-+*** 740 800 350
1,5 µF 9,7 × 12,2 × 17,5 B32512-J3155-+*** 600 600 250
2,2 µF 11,7 × 14,0 × 17,5 B32512-J3225-+*** 500 500 150
3,3 µF 14,9 × 15,7 × 17,5 B32512-J3335-+*** 390 400 100
400 Vdc
(200 Vac) 22 nF 4,3 × 6,8 × 17,5 B32512-J6223-+*** 1450 1500 1000
33 nF 4,3 × 6,8 × 17,5 B32512-J6333-+*** 1450 1500 1000
47 nF 4,3 × 6,8 × 17,5 B32512-J6473-+*** 1500 1600 1000
68 nF 4,3 × 6,8 × 17,5 B32512-J6683-+*** 1500 1600 1000
0,10 µF 4,3 × 6,8 × 17,5 B32512-J6104-+*** 1400 1500 1000
0,15 µF 4,9 × 7,7 × 17,5 B32512-J6154-+*** 1250 1300 700
0,22 µF 5,7 × 8,7 × 17,5 B32512-J6224-+*** 1050 1100 500
0,33 µF 7,0 × 9,5 × 17,5 B32512-J6334-+*** 850 900 400
0,47 µF 8,3 × 10,5 × 17,5 B32512-J6474-+*** 700 800 300
0,68 µF 9,9 × 12,0 × 17,5 B32512-J6684-+*** 590 600 150
1,0 µF 11,9 × 13,7 × 17,5 B32512-J6105-+*** 490 500 150
1) Replace the + by the code letter for the required capacitance tolerance.
Replace the *** by the code number for the required packing:.
- For straight leads: Ammo pack = 289, reel = 189
- For crimped leads: Ammo pack = 249, reel = 149
The ordering code for untaped components ends after the tolerance code letter.
B 32 512
48 Siemens Matsushita Components
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
MKT
Technical data
Climatic category
in accordance with IEC 68-1 55/100/561)
Lower category temperature
T
min
Upper category temperature
T
max
55 °C
+ 100 °C
Damp heat test 56 days/40 °C/93% relative humidity
Limit values after damp
heat test1) Capacitance change |
C
/
C
| 5 %
Dissipation factor change tan δ≤ 3 103 (at 1 kHz)
5 103 (at 10 kHz)
Insulation resistance
R
is 50 % of minimum
or time constant τ =
C
R
R
is as-delivered values
Reliability:
Reference conditions
Failure rate 0,5
V
R;40°C
2109/h = 2 fit
For a conversion table for other operating conditions and tem-
peratures, refer to page 276.
Service life 200 000 h
Failure criteria:
Total failure
Failure due to variation
of parameters
Short circuit or open circuit
Capacitance change |
C
/
C
|> 10 %
Dissipation factor tan δ> 2 upper limit value
Insulation resistance
R
is < 150 M(
C
R 0,33 µF)
or time constant τ =
C
R
R
is <50 s (
C
R > 0,33 µF)
DC test voltage 1,4
V
R, 2 s
Category voltage
V
C
Operation with dc voltage or
ac voltage
V
rms up to 60 Hz
T
85 °C:
V
C = 1,0
V
R or 1,0
V
rms
T
100 °C:
V
C = 0,8
V
R or 0,8
V
rms
Category voltage for
short operating periods
T
100 °C:
V
C = 1,25
V
R or 1,0
V
rms for max. 2000 h
T
125 °C:
V
C = 0,5
V
R or 0,5
V
rms for max. 1000 h
Dissipation factor tan δ(in 103)
at 20 °C
(upper limit values)
Insulation resistance
R
is
or time constant τ =
C
R
R
is
at 20 °C, rel. humidity 65 %
(minimum as-delivered values)
1) According to CECC 30401-007, test criteria must be met after exposure to damp heat for 21 days.
C
R 0,1 µF 0,1 µF<
C
R1µF
C
R> 1 µF
at 1 kHz 8 8 10
10 kHz 15 15
100 kHz 30
V
R
C
R 0,33 µF
C
R> 0,33 µF
100 Vdc 3750 M1250 s
250 Vdc 7500 M2500 s
B 32 510 … B 32 512
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
Siemens Matsushita Components 49
MKT
Pulse handling capability
Maximum permissible voltage change per unit of time for non-sinusoidal voltages
(pulse, sawtooth)
For
V
pp <
V
R , the permissible voltage rise rate value
V
pp/τ may be multiplied by the factor
V
R/
V
pp.
Also refer to the calculation example on page 250.
Impedance
Z
versus
frequency
f
(typical values)
V
RMax. rate of voltage rise
V
pp/τ in V/µs (for
V
pp =
V
R)
Lead spacing
7,5 mm 10 mm 15 mm
63 Vdc 120
100 Vdc 150 75 50
250 Vdc 200 150 100
400 Vdc 275 175 125
V
RPulse characteristic
k
0 in V2/µs (for
V
pp
V
R)
Lead spacing
7,5 mm 10 mm 15 mm
63 Vdc 15 000
100 Vdc 30 000 15 000 10 000
250 Vdc 100 000 75 000 50 000
400 Vdc 220 000 140 000 100 000
B 32 510 … B 32 512
50 Siemens Matsushita Components
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
MKT
7,5
Permissible ac voltage
V
rms versus frequency
f
Lead spacing 7,5 mm
63 Vdc/40 Vac 100 Vdc/63 Vac
250 Vdc/160 Vac 400 Vdc/200 Vac
Vac
V
rms
Vac
V
rms
Vac
V
rms
Vac
V
rms
B 32 510
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
Siemens Matsushita Components 51
MKT
10
Permissible ac voltage
V
rms versus frequency
f
Lead spacing 10 mm
100 Vdc/63 Vac 250 Vdc/160 Vac
400 Vdc/200 Vac
Vac
V
rms
Vac
V
rms
Vac
V
rms
B 32 511
52 Siemens Matsushita Components
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32510-512
MKT
15
Permissible ac voltage
V
rms versus frequency
f
Lead spacing 15 mm
100 Vdc/63 Vac 250 Vdc/160 Vac
400 Vdc/200 Vac
Vac
V
rms
Vac
V
rms
Vac
V
rms
B 32 512