LM317L
2
Absolute Maximum Ratings
Electrical Characteristics
(VI - VO = 5V, IO = 40mA, 0°C ≤ TJ ≤ +125°C, PDMAX = 625mW, unless otherwise specified)
• Load and Line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken
into account separately. Pulse testing with low duty cycle is used.
Parameter Symbol Value Unit
Input-Output Voltage Differential VI - VO40 V
Power Dissipation PDInternally limited W
Operating Junction Temperature Range Tj0 ~ +125 °C
Storage Temperature Range TSTG -65 ~+125 °C
Parameter Symbol Conditions Min. Typ. Max. Unit
*Line Regulation Rline TA = +25°C
3V ≤ VI − VO ≤ 40V -0.010.04
%/V
3V ≤ VI − VO ≤ 40V - 0.02 0.07
*Load Regulation Rloal
TA = +25°C
10mA ≤ IO ≤100mA
VO ≤ 5V
VO ≥5V
-5
0.1 25
0.5 mV
%/ VO
10mA ≤ IO ≤ 100mA
VO ≤ 5V
VO ≥ 5V -20
0.3 70
1.5 mV
%/ VO
Adjustment Pin Current IADJ -- 50 100 µA
Adjustment Pin Current Change ∆IADJ 3V ≤ VI - VO ≤ 40V
10mA ≤ IO ≤ 100mA
PD < PDMAX -0.2 5 µA
Reference Voltage VREF 3V < VI - VO <40V
10mA ≤ IO ≤100mA
PD ≤ PDMAX 1.20 1.25 1.30 V
Temperature Stability STT--0.7- %
Minimum Load Current to
Maintain Regulation IL(MIN) VI - VO = 40V - 3.5 10 mA
Maximum output Current IO(MAX) VI - VO ≤ 15V, PD < PDMAX 100 200 - mA
VI - VO ≤ 40V
PD < PDMAX, TA = +25°C25 50 -
RMS Noise, % of VOUT eNTA =+ 25°C, 10Hz < f <10KHz - 0.003 - %/ VO
Ripple Rejection RR VO = 10V, f = 120Hz
without CADJ
CADJ = 10uF 66 65
80 -dB
Long-Term Stability ST TJ = +125 °C, 1000 Hours - 0.3 - %