RS401L - RS407L 4.0A BRIDGE RECTIFIER NOT RECOMMENDED FOR NEW DESIGNS, PLEASE USE GBU4005 - GBU410 Features * Plastic Package has UL Flammability Classification * * * * * 94V-0 Surge Overload Rating of 200A Peak Ideal for Oriented Circuit Board High Reliability and Low Leakage Rating to 1000V PIV UL Recognized Under Component Index, File Number E94661 A RS-4L B - + C H Mechanical Data * Case: RS-4L, Plastic * Terminals: Plated Leads Solderable per G MIL-STD-202, Method 208 * Mounting Position: Any * Approx. Weight: 5.6 grams D Dim Min Max A 18.5 19.5 B 15.4 16.0 C 19.0 - D 6.2 6.5 E 4.6 5.6 G 1.5 2.0 H 1.3 Typical All Dimensions in mm E Maximum Ratings and Electrical Characteristics E E @ TA = 25C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol RS 401L RS 402L RS 403L RS 404L RS 405L RS 406L RS 407L Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRSM 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Output Current at TA = 50C Peak Forward Surge Current, 8.3 ms half sine-wave superimposed on rated load (JEDEC Method) I(AV) 4.0 A IFSM 200 A VF 1.0 V IR 10.0 1.0 mA mA I2t Rating for fusing (t<8.3ms) I2 t 166 A2 s Operating Temperature Range TJ -55 to +150 C TSTG -55 to +150 C Maximum Forward Voltage at 3.0A Maximum DC Reverse Current at Rated DC Blocking Voltage Storage Temperature Range DS21315 Rev. 5 - 3 TA = 25C TC = 100C 1 of 2 www.diodes.com RS401L-RS407L a Diodes Incorporated 4 3 2 1 Single Phase Half Wave 60 Hz Resistive or Inductive Load 1.0 0.1 TJ = 25C Pulse Width = 300 ms 2% Duty Cycle 0.01 0 IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FWD CURRENT (A) 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 20 40 60 80 100 120 140 TC, CASE TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 10 1.0 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 3 Typical Reverse Characteristics DS21315 Rev. 5 - 3 IFSM, PEAK FORWARD SURGE CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 5 250 200 150 100 50 8.3ms Single Half Sine-Wave JEDEC Method 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Max Non-Repetitive Peak Fwd Surge Current 2 of 2 www.diodes.com RS401L-RS407L