3MTM FourWall Header .100" x .100" Low Profile, SMT Straight, Straight and Rt Angle Through-Hole 2500 Series * Low profile, space saving design * Center slot polarization prevents mis-insertions and reduces insertion time * Dual slot polarization means broader compatibility with competitive polarization designs (not 10 pos.) * Optional retainer clip for locking sockets in place and increasing connection reliability in vibration-prone environments * Optional high temperature insulator suitable for "no lead" soldering operations * High temperature option in through-hole version suitable for "paste in hole" reflow soldering techniques * Exposed solder tails (on right angle version) provide ease of cleaning and reduced repair costs * Straight surface mount version available * See regulatory information appendix (RIA) for chemical compliance information Date Modified: October 22, 2008 TS-0770-F Sheet 1 of 5 Physical Insulator Glass Filled Polyester (PBT), Glass Filled Polyester (PCT)Material: High Temperature Option Flammability: UL 94V0 Color: Gray (PBT), Beige (PCT) or Black (PCT) Contact Material: Copper Alloy Plating Underplating: 100 " [ 2.54 m ] Nickel - Overall Wiping Area: Gold (See Ordering Information) Solder Tails: 200 " [ 5.08 m ] Tin Lead or Matte Tin (See Ordering Information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 2 A 9 Insulation Resistance: >1 x 10 W at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C Process Rating: 260C, (High Temperature and PCT insulator versions only), single pass, (profile per J-STD-020C) PBT insulator version, maximum molded insulator temperature 191C (solder wave process only) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM FourWall Header .100" x .100" Low Profile, Straight Through-Hole 2500 Series Inch (mm) Tolerance Unless Noted B NOTCH D .194 4.93 NOTCH E .228 5.79 .100 2.54 REF. .0 Inch .250 6.35 PIN 1 .100 2.54 REF. POSITION 1 ORIENTATION TRIANGLE .338 8.59 .1 .00 .000 .01 .005 [ ] Dimensions for Reference only C NOTCH B SEE TABLE 1 .0245 .0005 0.62 0.013 TYP NOTCH A SEE TABLE 1 & NOTE 1 .165 4.19 A NOTCH C SEE TABLE 1 & NOTE 1 .25 6.43 .243 6.17 .298 7.57 .390 9.91 .112 +/- .01[2.84] for 02&K2 versions .155 +/- .01[3.94] for 03 versions SECTION A-A A Table 1 A Dimensions Pin Qty A .788 (20.02) .708 (17.98) BC 14 .988 (25.10) .908 (22.06) BCDE 16 1.088 (27.64) 1.008 (25.60) ABCDE 20 1.288 (32.72) 1.208 (30.68) ABCDE 24 1.488 (37.80) 1.408 (35.76) ABCDE 26 1.588 (40.34) 1.508 (38.30) ABCDE 30 1.788 (45.42) 1.708 (43.38) ABCDE 34 1.988 (50.50) 1.908 (48.46) ABCDE 40 2.288 (58.12) 2.208 (56.08) ABCDE 50 2.788 (70.82) 2.708 (68.78) ABCDE 60 3.288 (83.52) 3.208 (81.48) ABCDE 64 3.488 (88.60) 3.408 (86.56) ABCDE Ordering Information X25XX60XX-XX Pin Quantity: (See Table 1) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Polarizing Notches 10 Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518). 2.Contact tails .0245 [0.622] wire with .0075 [0.191] corner radii & .028 [.072] diagonal. 3. See page 4 for kink tail positions. 4. Solder stand offs facilitate .01 clearance above board for reflow soldering. Prefix: Blank = Std. Temp. Gray (PBT)(UB or UG Pltg. Req'd) N = High Temp. Beige (PCT)(UB or UG Pltg. Req'd) N = High Temp. Black (PCT)(RB Pltg. Req'd) B Solder Tail 02 = for .062 [1.57] thick board 03 = for .094 to .125 [2.39 to 3.18] thick board K2 = for .062 [1.57] thick board Plating: UG = 15" [0.38m] Gold with 200" [5.08m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) UB = 30" [0.76m] Gold with 200" [5.05m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) RB = 30" [0.76m] Gold with 200" [5.08m] Matte Tin Solder Tails (RIA E1 & C1 apply) TS0770F Sheet 2 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM FourWall Header .100" x .100" Low Profile, Right Angle Through-Hole 2500 Series Table 1 .194 4.93 NOTCH E NOTCH D .228 5.79 .100 2.54 REF. .250 6.35 PIN 1 .100 2.54 REF. POSITION 1 ORIENTATION TRIANGLE Dimensions Pin Qty B NOTCH B SEE TABLE 1 NOTCH A SEE TABLE 1 & NOTE 1 .165 4.19 A .338 8.59 A Polarizing Notches B 10 .788 (20.02) .708 (17.98) BC 14 .988 (25.10) .908 (22.06) BCDE 16 1.088 (27.64) 1.008 (25.60) ABCDE 20 1.288 (32.72) 1.208 (30.68) ABCDE 24 1.488 (37.80) 1.408 (35.76) ABCDE 26 1.588 (40.34) 1.508 (38.30) ABCDE 30 1.788 (45.42) 1.708 (43.38) ABCDE 34 1.988 (50.50) 1.908 (48.46) ABCDE 40 2.288 (58.12) 2.208 (56.08) ABCDE 50 2.788 (70.82) 2.708 (68.78) ABCDE 60 3.288 (83.52) 3.208 (81.48) ABCDE 64 3.488 (88.60) 3.408 (86.56) ABCDE NOTCH C SEE TABLE 1 & NOTE 1 .0245 .0005 0.62 0.013 TYP .298 7.57 .390 9.91 .25 6.43 .243 6.17 .39 [9.9] .100 Ref [2.54] A A SECTION A-A .112 +/- .01[2.84] for 02&K2 versions .155 +/- .01[3.94] for 03 versions Inch (mm) Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005 [ ] Dimensions for Reference only Notes: 1. 2. 3. C Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518). Contacts tails .0245 [0.622] wire with .0075 [0.191] corner radii & .028 [.071] diagonal. See page 4 for kink tail positions. Ordering Information Prefix: Blank = Std. Temp. Gray (PBT)(UB or UG Pltg. Req'd) N = High Temp. Beige (PCT)(UB or UG Pltg. Req'd) N = High Temp. Black (PCT)(RB Pltg. Req'd) Pin Quantity: (See Table 1) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ X25XX50XX-XX Plating: UG = 15" [0.38m] Gold with 200" [5.08m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) UB = 30" [0.76m] Gold with 200" [5.05m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) RB = 30" [0.76m] Gold with 200" [5.08m] Matte Tin Solder Tails (RIA E1 & C1 apply) Solder Tail 02 = for .062 [1.57] thick board 03 = for .094 to .125 [2.39 to 3.18] thick board K2 = for .062 [1.57] thick board TS0770F Sheet 3 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM FourWall Header .100" x .100" Low Profile, Surface Mount Straight 2500 Series B NOTCH D .194 NOTCH E 4.93 C .228 5.79 Inch .338 8.59 [mm] Tolerance Unless Noted .359 9.11 .359 .250 6.35 9.12 .0 Inch .100 2.54 PIN 1 .100 NOTCH B SEE TABLE 1 2.54 REF. REF. VACUUM CAP .01 .005 VACUUM CAP REMOVED FOR CLARITY THIS VIEW NOTCH C SEE TABLE 1 & NOTE 1 .165 4.19 A .000 [ ] Dimensions for Reference only NOTCH A SEE TABLE 1 & NOTE 1 POSITION 1 ORIENTATION TRIANGLE .1 .00 .25 6.43 .010 0.25 .243 6.17 .400 .010 10.16 0.10 .298 7.57 .390 9.91 .0245 .0005 0.62 0.013 TYP A .170 4.32 .440 .010 11.18 0.10 SECTION A-A A Table 1 Dimensions Pin Qty A B Polarizing Notches Tape and Reel Pkg Code 10 .788 (20.02) .708 (17.98) BC WD (44 mm) 14 .988 (25.10) .908 (22.06) BCDE WD (44 mm) 16 1.088 (27.64) 1.008 (25.60) ABCDE WE (56 mm) 20 1.288 (32.72) 1.208 (30.68) ABCDE WE (56 mm) 24 1.488 (37.80) 1.408 (35.76) ABCDE WE (56 mm) 26 1.588 (40.34) 1.508 (38.30) ABCDE WF (72 mm) 30 1.788 (45.42) 1.708 (43.38) ABCDE WF (72 mm) 34 1.988 (50.50) 1.908 (48.46) ABCDE WF (72 mm) 40 2.288 (58.12) 2.208 (56.08) ABCDE WG(88 mm) 50 2.788 (70.82) 2.708 (68.78) ABCDE WG (88 mm) 60 3.288 (83.52) 3.208 (81.48) ABCDE WH (120 mm) 64 3.488 (88.60) 3.408 (86.56) ABCDE WH (120 mm) .050 [1.27] .470 [11.94] .200 [5.08] .070 [1.78] .270 [6.86] .100 Typ [2.54] P.C. Board Foot Print Notes: 1. Notches A & C will accommodate 3M Polarizing Key N3518. 2. Vacuum cap will be centered on connectors with odd # of pins/row. It will be offset away from pin 1 on connectors having an even # of pins per row (shown). 3. Coplanarity .004 for less than 30 position, .006 for 30 and above. X25XX6V0C-XX -XX Ordering Information Prefix: N = High Temp Black (PCT) (RB Plating Req'd) Pin Quantity: (See Table) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Packaging Options: WX = tape & reel packaging (see table 1) Plating: RB = 30" [0.76m] Gold with 200" [5.08m] Matte Tin Solder Tails (RIA E1 & C1 apply) TS0770F Sheet 4 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM FourWall Header .100" x .100" Low Profile, Accessories 2500 & 3000 Series Shrouded Header Total Number of Pins Number of Tails Kinked 10 4 3 4 16 4 3 4 13 4 21 14 4 20 3 4 24 3 4 26 3 4 30 3 4 34 5 4 36 7 4 40 7 4 50 7 4 60 7 4 64 11 4 Connector Pin Qty Positions Kinked 11 4 4 4 6 8 8 8 8 12 12 7 8 11 12 17 18 23 25 27 27 33 43 49 53 2500 Series 14 22 24 26 28 28 34 44 50 54 Dimension A 10 .81 (20.6) 14 1.02 (25.9) 16 1.12 (28.4) 20 1.32 (33.5) 24 1.52 (38.7) 26 1.63 (41.4) 30 1.83 (46.4) 34 2.03 (51.6) 40 2.33 (59.2) 50 2.83 (71.9) 60 3.33 (84.6) 64 3.53 (89.7) Kinked Tail Detail: Kink is located .05" below bottom surface of plastic. External radius of kink toward part centerline. Part Number Material Color 3505-33B 3505-33 Nylon Nylon Black Gray 35058XXX Connector Pin Count: (See Table) Clip Height Code 0 = .31 [ 7.9 ] for Sockets W/O Strain Relief 1 = .53 [ 13.5 ] for Sockets with Strain Relief A .11 [2.8] Maximum Uncoated Area (On both edges) .144 [3.66] .204 [5.18] .830 [21.08] .2 .1 [5.1] .057 [1.45] Clip Height Code Alternate Uncoated Area .573 [14.55] .043 [1.09] .118 [3.00] Short/Long Socket Retainer Clip Long Snap In Latch Note: Latches not compatible with reflow soldering. For reflow soldering, attach latches after soldering. Note: Stainless steel with gray polyurethane coating. Part Number Material Color Part Number Material Color Dim A 3201-3 3201-1 PCT PBT Black Gray N3518 3518 LCP PBT Black Gray 0.02 0.02 .118 [3.00] .370 [9.40] .102 [2.59] .267 [6.78] .030 Dia [0.76] Breakaway Tab .082 [2.10] Polarizing Post 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ .34 Ref [8.6] .09 [2.3] A .15 [3.8] Note: 3MTM Scotch-WeldTM Epoxy Adhesive 2216 B/A Polarizing Keys TS0770F Sheet 5 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-E Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-E Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217A-E 3M is a trademark of 3M Company.