Features Applications Dimensions of 6, 8 and 10mm Television sets Carbon element Low cost receivers Open frame construction Vertical or horizontal adjustment TDB06/TDB08/TDB10 - Trimming Potentiometer Electrical Characteristics Taper .........................................B (linear) Standard Resistance Range ............................500 ohms to 1M ohm (see standard resistance table) Resistance Tolerance .............30% std. Nominal Resistance Value ...............See standard resistance table Residual Resistance .........................Max. 100 ohms or 5% Environmental Characteristics Power Rating TDB06 ....................................0.05 watt TDB08/10 .................................0.1 watt Temperature ...................+5% and -30% resistance change after 5 hours at 70C Load ...........5% resistance change max. after 3 hours rated load Humidity ...15% resistance change max. after 5 hours in 95% RH at 40 Load Life...20% resistance change max. after rated load for 350 hours in 90% RH at 40 TDB06-5 TDB08-5 TDB10-4 TDB06-6 TDB08-3 TDB10-8 A A C C B B E D D 1.0 (.039) 3 PLACES E G RECOMMENDED PCB LAYOUT F Physical Characteristics Mechanical Angle...................280 20 Rotational Torque...............20 - 300 gcm Stop-End Strength ...........0.5 kgcm min. Mechanical Strength Base ..1 kgcm min. Contact Force ...........................20g min. Rotational Life ................15% resistance change max. after 100 rotational life tests Soldering Condition .............260C max. within 3 seconds RECOMMENDED PCB LAYOUT G TDB 08 - 3 103 B C Pin/Housing Style (Refer to drawing) Resistance Code (See table) Consult factory for other available options. G D E F G TDB-06-5 6.6 .260 7.2 .283 3.6 .142 3 .118 3.8 .150 6.9 .272 2.5 .089 TDB-08-5 8 .315 11 .433 4 .157 4 .157 4 .157 10 .394 2.5 .089 TDB-10-4 10 .394 15.3 .602 7.3 .278 5 .197 4 .157 15 .590 3.5 .138 Dimensions A B C D E F G Standard Resistance Table Resistance (Ohms) 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 H H Dimensions Model Size * 06 = 6.5mm * 08 = 8mm * 10 = 10mm 1.2 DIA. (.047) 3 PLACES G A How To Order 1.2 DIA. (.047) 3 PLACES Resistance Code 501 102 202 502 103 203 503 104 204 504 105 H TDB-06-6 6.6 .260 7.2 .283 3.6 .142 3.5 .138 2.3 .090 2.5 .089 2.5 .089 2.5 .089 TDB-08-3 8 .315 11 .433 4 .157 4 .157 3 .118 2.5 .089 2.5 .089 2.5 .089 DIMENSIONS ARE: TDB-10-8 10 .394 15.3 .602 7.3 .278 7 .275 3.5 .138 1 .039 1 .039 5 .197 METRIC (INCHES) Specifications are subject to change without notice.