Series 511 Standard DIP Sockets with
Solder Tail Bifurcated Contacts
Note: Aries specializes in custom design and production. In addition to the stan-
dard products shown on this page, special materials, platings, sizes, and configu-
rations can be furnished, depending on quantities. Aries reserves the right to
change product specifications without notice.
FEATURES:
• Standard DIP sockets are available with solder tail or wire
wrap pins, all with bifurcated contacts. Consult Data Sheet
No. 12005 for wire wrap pins.
• Aries offers these standard DIP sockets in more sizes than
any other manufacturer.
SPECIFICATIONS:
• Standard body material is red UL 94-HB Glass-filled Nylon.
• High temperature body material is black UL 94v-0 4/6 Nylon.
• Bifurcated contacts are Grade A spring-tempered Phosphor
Bronze per QQ-B-750.
• Contact plating is either 50-150μ[1.27-3.81μm] 60/40
Tin/Lead Alloy, or 10μ[.25μm] min. Gold per MIL-G-45204
over 50μ[1.27μm] min. Nickel per QQ-N-290.
• Contact current rating=1 Amp.
• Operating temperature=221°F [105°C] Tin plating,
=257°F [125°C] Gold plating.
• Insertion Force=110 grams/pin average; Withdrawal
Force=75 grams/pin average.
• Accepts flat leads up to .014 thk. x .020 wide
[.36 x .51], round leads up to .020 [.51] in diameter.
• Socket accepts lead lengths from seating plane from .075-
.160 [1.91-4.06].
Mounting Considerations:
•Suggested PCB hole size=.035 ± .002 [.89 ± .05]. dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
CONTACT DETAIL
XX-X511-1XXX
ORDERING INFORMATION
No. of pins
(see table)
Row-to-row spacing:
2: ”C”=.200 [5.08]
3: “C”=.300 [7.62]
4: “C”=.400 [10.16]
6: “C”=.600 [15.24]
Series
Solder tail pin
Plating:
0=Tin
1=Gold
Optional suffix:
WR=Without rails
V0=UL 94V-0
plastic
Centers “C”
Width “D”
Avai l abl e Si zes
. 200 [5. 08]
. 290 [7. 36]
8, 10
. 300 [7. 62]
. 390 [9. 90]
8, 14-20
. 400 [10. 16]
. 490 [12. 45]
22
. 600 [15. 24]
. 690 [17. 54]
8-24, 28-40, 48
“A”=(NO. OF PINS PER ROW X .100 [2.54]) + .050 [1.27]
“B”=(NO. OF PINS PER ROW - 1) X .100 [2.54]
Consult Data Sheet No.
12005 for standard DIP
sockets with wire wrap
bifurcated contacts.
All tolerances ± .005 [.13]
unless otherwise specified
12004
REV. C
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
NORTH AMERICA
Frenchtown, NJ USA
TEL:(908) 996-6841
FAX:(908) 996-3891
EUROPE
TEL: +44 870 240 0249
FAX: +44 871 919 6033
europe@arieselec.com
http://www.arieselec.com • info@arieselec.com
ABCDEFG
