Agilent T-13/4 (5 mm) Precision Optical Performance InGaN Blue and Green Lamps Data Sheet Features * Well defined spatial radiation pattern * Viewing angles: 15 and 30 * High luminous output HLMP-CB15, HLMP-CB16, HLMP-CB30, HLMP-CB31, HLMP-CM15, HLMP-CM16, HLMP-CM30, HLMP-CM31 * Colors: 472 nm Blue, 526 nm Green * Superior resistance to moisture * UV resistant epoxy Description These high intensity blue and green LEDs are based on InGaN material technology. InGaN is the most efficient and cost effective material for LEDs in the blue and green region of the spectrum. The 472 nm typical dominant wavelength for blue and 526 nm typical dominant wavelength for green are well suited to color mixing in full color signs. These LED lamps are untinted, nondiffused, T-13/4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles. These lamps are made with an advanced optical grade epoxy, offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications. The high maximum LED junction temperature limit of +130C enables high temperature operation in bright sunlight conditions. The package epoxy contains both UV-A and UV-B inhibitors to reduce the effects of long term exposure to direct sunlight. Benefits * Superior performance in outdoor environments * Wavelengths suitable for color mixing in full color (RGB) signs Applications * Commercial outdoor signs * Automotive interior lights * Front panel indicators * Front panel backlighting These lamps are available in two viewing angle options to give the designer flexibility with optical design. CAUTION: HLMP-CBxx and HLMP-CMxx LEDs are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. LED Indicators Device Selection Guide Part Number HLMP-CB15-P00xx HLMP-CB15-R00xx HLMP-CB15-QT0xx HLMP-CB16-P00xx HLMP-CB16-QT0xx HLMP-CB30-K00xx HLMP-CB30-KN0xx HLMP-CB30-M00xx HLMP-CB30-MQ0xx HLMP-CB30-NRGxx HLMP-CB31-M00xx HLMP-CB31-M0Gxx HLMP-CB31-NRGxx HLMP-CM15-S00xx HLMP-CM15-SV0xx HLMP-CM15-W00xx HLMP-CM15-VY0xx HLMP-CM16-S00xx HLMP-CM16-VY0xx HLMP-CM30-M00xx HLMP-CM30-MQ0xx HLMP-CM30-S00xx HLMP-CM30-TWAxx HLMP-CM31-M00xx HLMP-CM31-TWAxx Typical Viewing Angle 15 15 15 15 15 30 30 30 30 30 30 30 30 15 15 15 15 15 15 30 30 30 30 30 30 Tolerance for intensity limit is 15%. 2 Color and Typ. Dominant Wavelength d (nm) Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Min. Luminous Intensity, Iv (mcd) at 20 mA 880 1500 1150 880 1150 310 310 520 520 680 520 520 680 1900 1900 5500 4200 1900 4200 520 520 1900 2500 520 2500 Typical Forward Voltage (V) at 20 mA 3.8 3.5 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.5 3.8 3.8 3.8 3.8 3.8 3.5 3.8 3.8 3.8 Leads with Stand-Offs No No No Yes Yes No No No No No Yes Yes Yes No No No No Yes Yes No No No No Yes Yes Package Drawing A A A B B A A A A A B B B A A A A B B A A A A B B Part Numbering System HLMP - X X XX - X X X XX Mechanical Options 00: Bulk DD: Ammo Pack YY: Flexi bin, Bulk ZZ: Flexi bin, Ammo Pack Color Bin Selection 0: Full color range A: Color bin 1 & 2 only G: Color bin 2, 3 & 4 only Maximum Intensity Bin 0: No maximum Iv bin limit Others: Refer to Intensity Bin Limit Table Minimum Intensity Bin Refer to Device Selection Guide Viewing Angle and Standoff Options 15: 15 degree without standoff 16: 15 degree with standoff 30: 30 degree without standoff 31: 30 degree with standoff Color B: Blue M: Green Package C: T-1 3/4 (5 mm) round lamp 3 Package Dimensions 5.00 0.20 (0.197 0.008) 5.00 0.20 (0.197 0.008) 8.71 0.20 (0.343 0.008) 1.14 0.20 (0.045 0.008) d 8.71 0.20 (0.343 0.008) 1.14 0.20 (0.045 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 31.60 MIN. (1.244) 1.50 0.15 (0.059 0.006) 0.70 (0.028) MAX. CATHODE LEAD CATHODE LEAD 1.00 MIN. (0.039) 0.50 0.10 SQ. TYP. (0.020 0.004) 5.80 0.20 (0.228 0.008) CATHODE FLAT 2.54 0.38 (0.100 0.015) HLMP-Cx15 and HLMP-Cx30 1.00 MIN. (0.039) CATHODE FLAT 0.50 0.10 SQ. TYP. (0.020 0.004) 5.80 0.20 (0.228 0.008) 2.54 0.38 (0.100 0.015) HLMP-Cx16 and HLMP-Cx31 HLMP-Cx16 HLMP-Cx31 d = 12.60 0.25 d = 12.22 0.50 (0.496 0.010) (0.481 0.020) Notes: 1. Dimensions in mm. 2. Tolerance 0.1 mm unless otherwise noted. 4 Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current[1] Peak Pulsed Forward Current Average Forward Current Reverse Voltage (I R = 100 A) Power Dissipation LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature Blue and Green 30 mA 100 mA 30 mA 5V 120 mW 130C -40C to +80C -40C to +100C 260C for 5 seconds Note: 1. Derate linearly as shown in Figure 5 for temperatures above 50C. Electrical/Optical Characteristics at TA = 25C Parameter Forward Voltage Reverse Voltage Peak Wavelength Blue (d = 472 nm) Green (d = 526 nm) Spectral Halfwidth Blue (d = 472 nm) Green (d = 526 nm) Capacitance Luminous Efficacy Blue (d = 472 nm) Green (d = 526 nm) Thermal Resistance 5 Symbol VF VR Min. Typ. 3.5 Max. 4.0 Units V 5 peak 470 524 nm 1/2 35 47 43 nm 75 520 240 lm/W C v RJ-PIN pF C/W Test Conditions IF = 20 mA IR = 100 A Peak of Wavelength of Spectral Distribution at IF = 20 mA Wavelength Width at Spectral Power Point at IF = 20 mA VF = 0, F = 1 MHz Emitted Luminous Power/Emitted Radiant Power LED Junction-toCathode Lead 30 GREEN BLUE 0.8 30 25 FORWARD CURRENT RELATIVE INTENSITY 0.9 IF - FORWARD CURRENT - mA 1.0 0.7 0.6 0.5 0.4 0.3 0.2 20 15 10 5 0.1 0 400 450 500 550 600 650 700 0.5 0 0 5 10 15 20 25 1.0 35 0.9 30 25 20 15 10 5 0 DOMINANT WAVELENGTH - nm NORMALIZED INTENSITY 40 60 80 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0 10 20 30 40 ANGULAR DISPLACEMENT - DEGREES Figure 7. Spatial radiation pattern - 30 lamps. 0.6 0.5 0.4 0.3 0.2 476 540 475 535 474 473 GREEN 525 472 BLUE 0 20 40 60 80 100 FORWARD CURRENT - mA Figure 8. Color vs. forward current. -10 0 10 20 30 Figure 6. Spatial radiation pattern - 15 lamps. 477 530 -20 ANGULAR DISPLACEMENT - DEGREES 478 545 520 0.7 0 -30 100 550 0.1 6 20 Figure 5. Maximum forward current vs. ambient temperature. 0.9 0.8 0.1 TA - AMBIENT TEMPERATURE - C 1.0 0 -40 -30 -20 -10 Figure 3. Forward current vs. forward voltage for devices with 3.8 V typical Vf. 40 IF - FORWARD CURRENT - mA Figure 4. Relative luminous intensity vs. forward current. 5 VF - FORWARD VOLTAGE - V 0 30 10 FORWARD VOLTAGE NORMALIZED INTENSITY IF - FORWARD CURRENT - mA INTENSITY NORMALIZED AT 20 mA 1.0 15 0 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 Figure 2. Forward current vs. forward voltage for devices with 3.5 V typical Vf. 1.5 20 0 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 WAVELENGTH - nm Figure 1. Relative intensity vs. wavelength. 25 471 120 Color Bin Limits (nm at 20 mA) Intensity Bin Limits Blue Bin ID 1 Color Range (nm) Min. Max. 460.0 464.0 2 464.0 468.0 3 468.0 472.0 4 472.0 476.0 5 476.0 480.0 Green Bin ID 1 Color Range (nm) Min. Max. 520.0 524.0 2 524.0 528.0 3 528.0 532.0 4 532.0 536.0 Bin Name K L M N P Q R S T U V W X Y Z 5 536.0 540.0 Tolerance for each intensity bin limit is 15%. Tolerance for each bin limit is 0.5 nm. Tolerance for each bin limit is 0.5 nm. Note: 1. All bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representatives for further information. 7 Min. 310 400 520 680 880 1150 1500 1900 2500 3200 4200 5500 7200 9300 12000 Max. 400 520 680 880 1150 1500 1900 2500 3200 4200 5500 7200 9300 12000 16000 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright (c) 2003 Agilent Technologies, Inc. Obsoletes 5988-8658EN August 1, 2003 5988-9962EN