Murata
Manufacturing Co., Ltd.
Cat.No.P50E
CERAFILr(Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr
(Filters/Traps
/Discriminators)
for AUDIO/VISUAL
EQUIPMENT
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
CONTENTS
Recycled Paper
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Numbering 2
CERAFILr 10.7MHz Small Chip Type SFECS Series 6
CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series 9
CERAFILr 10.7MHz Chip Type SFECV Series 11
CERAFILr 10.7MHz Standard Lead Type 14
CERAFILr 10.7MHz Low Loss Type 17
CERAFILr 10.7MHz Low Profile Type 20
CERAFILr 10.7MHz Low Spurious Response Type 23
CERAFILr 10.7MHz Wide Bandwidth Type 26
CERAFILr 10.7MHz Narrow Bandwidth Type 28
CERAFILr 10.7MHz for FM-IF Tuners 31
CERAFILr 10.7MHz High Selectivity Type SFTLA Series 36
CERAFILr 10.7MHz Related Data on Lead Type 39
CERAFILr 4.5-6.5MHz Chip Type SFSKA Series 40
CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series 41
CERAFILr 3.5-6.5MHz Low Profile Type SFSRL Series 46
CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/L Series 49
CERAFILr 455kHz Chip Type PFWCC Series 51
CERAFILr 455kHz Chip Type SFPCA Series 53
CERAFILr 455kHz SFULA/SFZLA Series 55
CERAFILr 455kHz PFSLA/PFWLA Series 58
CERAFILr 455kHz SFPLA/CFWLA Series 60
CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 62
CERAFILr 455kHz for Search-stop Signal Detection 64
CERAFILr 455kHz SF/PF Series Temperature Characteristics 65
CERAFILr 455kHz SF/PF/BF Series Application Circuit 66
Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 68
Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series 69
Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series 70
Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRD Series 73
Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRD Series 76
Ceramic Trap 3.5-6.5MHz Double Traps TPWRD Series 77
Ceramic Trap 3.5-6.5MHz Triple Traps TPTRD Series 79
Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series 80
Ceramic Discriminator 10.7MHz Standard Lead Type CDALA Series 84
Ceramic Discriminator 10.7MHz Appllied IC Reference Table 88
Ceramic Discriminator 10.7MHz Appllied Circuit 90
Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRH Series 92
Ceramic Discriminator 3.5-6.5MHz Low Profile Type CDSRL Series 94
Notice (Soldering and Mounting) 96
Notice (Handling) 100
Packaging 107
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
e
LA
w
E
q
SF
r
10M7
t
FAA0
y
-B0
(Global Part Number)
qProduct ID
wOscillation/Numbers of Element
CERAFILr for FM
SF Ceramic Filters Four-digit alphanumerics express
pass-bandwidth, center frequency tolerance,
rank, series, others.
Product ID
tProduct Specification
FAA0
Code Product Specification
p is expressed "A" or subsequent code, which indicates the size.
eStructure/Size
Bulk
Plastic Taping ø180mm
Plastic Taping ø330mm
1500pcs. /Radial Taping H0=18mm
1000pcs. /Radial Taping H0=18mm
yPackaging
-B0
-R0
-R1
-A0
-A1
Code Packaging
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between "tProduct Specification"
and "yPackaging".
2 Elements Thickness Expander mode
3 Elements Thickness Expander mode
2 Elements Thickness Expander mode
(2nd Harmonic)
2 Elements Thickness Expander mode
(3rd Over Tone)
E
T
V
K
Code Oscillation/Numbers of Element
Lead Type
Chip Type
Lp
Cp
Code Structure/Size
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
u
-B0
e
RA
w
S
r
4M50
y
00
t
CF
q
SF
(Global Part Number)
qProduct ID
wOscillation/Numbers of Element
CERAFILr for TV/VCR
SF Ceramic Filters
Product ID
tProduct Specification Code (1)
AF
BF
CF
DF
EF
Code Product Specification Code (1)
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between "tProduct Specification
Code (1)" and "yProduct Specification Code (2)".
eStructure/Size
Bulk
Radial Taping H0=18mm
Plastic Taping ø=330mm
Standard Bandwidth Type
Tight Bandwidth Type
Standard Bandwidth Type
Broad Bandwidth Type
Ultra-broad Bandwidth Type
yProduct Specification Code (2)
00
Code Product Specification Code (2)
Standard Type
uPackaging
-B0
-A0
-R1
Code Packaging
2 Elements Thickness Shear mode
3 Elements Thickness Expander mode
S
T
Code Oscillation/Numbers of Element
Lead Type
Chip Type
Rp
Kp
Code Structure/Size
p is expressed "A" or subsequent code, which indicates the size.
The code AF is only applied to SFT series.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Global Part Number)
qProduct ID
wOscillation/Numbers of Element
CERAFILr for AM
PF
SF
CF
Ceramic Filters
Ceramic Filters
Ceramic Filters
Standard Type
Product ID
tProduct Specification
P2A
Code Product Specification
ppA indicates standard type.
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
eStructure/Size
Bulk
Plastic Taping (ø180mm)
Plastic Taping (ø330mm)
Radial Taping H0=18mm
Magazine Cassette
yPackaging
-B0
-R0
-R1
-A0
-M0
Code Packaging
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "tProduct Specification"
and "yPackaging".
1 Element Length mode
2 Elements Length mode
1 Element Area Expansion mode
2 Elements Area Expansion mode
4 Elements Area Expansion mode
S
W
U
Z
P
Code Oscillation/Numbers of Element
Lead Type
Chip Type
Lp
Cp
Code Structure/Size
y
-B0
e
LA
w
W
r
450K
t
P2A
q
PF
y
-B0
e
LA
w
U
r
450K
t
C
q
BF
(Global Part Number)
qProduct ID
wOscillation/Numbers of Element
CERAFILr for Search-stop Signal Detection
BF Resonator Bandwidth
Product ID
tProduct Specification
Cp
Code Product Specification
rNominal Center Frequency
With standard type, p is omitted.
eStructure/Size
450kHz
450K
Code Nominal Center Frequency
Bulk
yPackaging
-B0
Code Packaging
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, "Individual Specification (serial number)"
and "Lead Shape (Lead Bend : B)" are added between "tProduct
Specification" and "yPackage Specification Code" upon
specification.
1 Element Area Expansion mode
U
Code Oscillation/Numbers of Element
Lead Type Standard
LA
Code Structure/Size
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz".
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
e
LA
w
A
r
10M7
t
GA
u
-B0
y
001
q
CD
(Global Part Number)
qProduct ID
wOscillation
Discriminators for FM
CD Discriminators
Product ID
tProduct Specification
GA
Code Product Specification
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "yIC" and "uPackaging".
eStructure/Size
Bulk
Radial Taping H0=18mm
Plastic Taping ø=180mm
Plastic Taping ø=330mm
yIC
001
Code IC
Applicable IC Control Code
uPackaging
-B0
-A0
-R0
-R1
Code Packaging
Thickness Expander mode
Thickness Shear mode
A
S
Code Oscillation
Lead Type
Chip Type
Lp
Cp
Code Structure/Size
p is expressed "A" or subsequent code, which indicates the size.
Two-digit alphanumerics express
type, center frequency, rank, others
rNominal Center Frequency
Expressed by four-digit alphanumerics . The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
y
00
u
-B0
e
RA
w
S
r
4M50
t
B
q
TP
(Global Part Number)
qProduct ID
wFunction
Ceramic Traps
TP Ceramic Traps
Product ID
tProduct Specification Code (1)
B
C
Code Product Specification (1)
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "yProduct Specification
Code (2)" and "uPackaging".
eStructure/Size
Bulk
Radial Taping H0=18mm
Plastic Taping ø=330mm
Broad-bandwidth Type
Low-capacitance Type
yProduct Specification Code (2)
00
Code Product Specification Code (2)
Standard Type
uPackaging
-B0
-A0
-R1
Code Packaging
Single Traps
Triple Traps
Double Traps
S
T
W
Code Function
Lead Type
Chip Type
Rp
Kp
Code Structure/Size
p is expressed "A" or subsequent code, which indicates the size.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
4
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
e
RH
w
S
r
4M50
t
E
y
K
i
-A0
u
048
q
CD
(Global Part Number)
qProduct ID
wOscillation
Discriminators for TV/VCR
CD Discriminators
Product ID
tProduct Specification Code (1)
C
E
Code Product Specification Code (1)
With non-standard products, a letter Indicating "Individual
Specification" is added between "uIC" and "iPackaging".
eStructure/Size
Bulk
Radial Taping H0=18mm
Three-terminals
Two-terminals
yProduct Specification Code (2)
K
Code Product Specification Code (2)
Specification
uIC
048
Code IC
Applicable IC control code
iPackaging
-B0
-A0
Code Packaging
Thickness Shear mode
S
Code Oscillation
Standard Type
Low-profile
RH
RL
Code Structure/Size
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
6
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Small Chip Type SFECS Series
SFECS10M7 series for FM-receivers are small, high
performance and super thin (1.5mm max.) filters.
Piezoelectric element is connected in the sandwich
shape by ceramics substrate.
They have 1.5mm max. thickness and small mounting area.
(3.45x3.1mm)
SFECS series and PFWCC (kHz filter for AM receiver)
enable customers to make AM/FM set so thin and small
sized.
■ Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.5mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
flexible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating temperature range :
-20 to +80 (degree C)
Storage temperature range :
-40 to +85 (degree C)
■ Applications
1. Small, thin radios
2. Headphone stereos
Input electrode marker
3.45±0.2
3.10±0.2
1.4±0.1
(1)
(4)
(2) (3)
0.7±0.30.7±0.30.7±0.3
(1.30) (1.30)
0.85±0.30.85±0.3
0~0.3 0~0.3
0.6±0.3
(1.35) (1.35)
0.6±0.3
0~0.3 0~0.3
0.4
+0.3
-0.2
(1) : Input
(2) : Ground
(3) : Float (Signal line)
(4) : Output
( ) : Reference
: EIAJ Monthly Code
(in mm)
Part Number Center
Frequency (fo)
(MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFECS10M7HA00-R0 10.700 ±30kHz - 180 ±40kHz 470 max. 4.5 ±2.0dB 30 min. 330
SFECS10M7GA00-R0 10.700 ±30kHz - 230 ±50kHz 510 max. 3.5 ±2.0dB 30 min. 330
SFECS10M7FA00-R0 10.700 ±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 30 min. 330
SFECS10M7EA00-R0 10.700 ±30kHz - 330 ±50kHz 700 max. 3.0 ±2.0dB 30 min. 330
SFECS10M7DF0021-R0 - 10.700 fn ±200kHz min. 950 max. 3.0 ±2.0dB 20 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
7
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Standard Land Pattern Dimensions
(4)
(1) (2) (3)
0.8 0.6 0.8 0.6 0.8
(1) : Input (2) : Ground (3) : Float Signal Line (4) : Out put
(in mm)
It shows solder resist land pattern.
0.3
0.3
0.3
1.051.401.05
0.1 0.1
0.10.10.10.1
■ Test Circuit
Rg=50Ω
R1=280Ω
R2=330Ω
C2=10pF
(Including stray capacitance
and Input capacitance of RF Voltmeter)
RF
Voltmeter
E2C2E1 R2
R1
Rg
S.S.G.
=-10dBm
(4)(1)
(2)
(3)
(1) : Input
(2) : Ground
(3) : Float
(4) : Output
■ Frequency Characteristics
SFECS10M7HA00-R0
Attenuation (dB)
G.D.T. (µsec.)
Frequency (MHz)
0
2
4
6
8
10
5.00
4.80
4.60
4.40
4.20
4.00
3.80
3.60
5.60
5.40
5.20
10.500 10.600 10.700 10.800 10.900
SFECS10M7GA00-R0
Attenuation (dB)
G.D.T. (µsec.)
Frequency (MHz)
0
2
4
6
8
10
5.00
4.80
4.60
4.40
4.20
4.00
3.80
3.60
3.40
3.20
3.00
10.500 10.600 10.700 10.800 10.900
SFECS10M7FA00-R0
Attenuation (dB)
G.D.T. (µsec.)
Frequency (MHz)
0
2
4
6
8
10
4.60
4.40
4.20
4.00
3.80
3.60
3.40
3.20
3.00
2.80
2.60
10.500 10.600 10.700 10.800 10.900
■ Frequency Characteristics (Spurious)
SFECS10M7HA00-R0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
8.700 9.700 10.700 11.700 12.700
SFECS10M7GA00-R0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
8.700 9.700 10.700 11.700 12.700
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
8
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFECS10M7FA00-R0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
8.700 9.700 10.700 11.700 12.700
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
9
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series
SFECD10M7 series for FM-receivers are small, high
performance and ultra thin (1.0mm max.) filters.
Piezoelectric element is connected in the sandwich
shape by very thin ceramics substrate.
They have 1.0mm max. thickness and small mounting area.
(3.45x3.1mm)
SFECD series enable customers to make RF modules so
thin and small sized.
■ Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.0mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
flexible PCB design.
3. Operating temperature range :
-20 to +80 (degree C)
Storage temperature range :
-40 to +85 (degree C)
■ Applications
1. Card type radios
2. Card type RKE modules
3. Card type PHS modules
: Marking
: EIAJ Monthly Code
: Center Frequency
Rank Code
: Reference( ) (in mm)
1.0 max.
3.1±0.2
3.45±0.2
(0.6)(0.6) (0.6)
(1.28)
(1.28)
0 to 0.4
(4)
(1.28)(1.28)
0.65±0.3
0.85±0.3
0.85±0.3
0 to 0.35 0 to 0.35
0 to 0.4
0.75±0.3
(2) (3)
(1) (2) (3)
0.65±0.3
0.55±0.3 (1) : Input
(2) : Ground
(3) : Float (Signal line)
(4) : Output
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFECD10M7FA00-R0 10.700 ±30kHz 280 ±50kHz 590 max. 3.0 ±2.0dB 30 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
10
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Standard Land Pattern Dimensions
(4) (2) (3)
(1) (2) (3)
0.8 0.5 0.8 0.5 0.8
(1) : Input (2) : Ground (3) : Float (Signal Line) (4) : Output
(in mm)
It shows solder resist land pattern.
0.3
0.3
0.3
1.051.401.05
0.1 0.1
0.10.10.10.1
■ Test Circuit
R1+Rg=R2=330Ω±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Ground
(3) : Float
(4) : Output
RF
Voltmeter
E2C2E1 R2
R1
Rg
S.S.G.
(4)(1)
(2)
(3)
(2)
(3)
■ Frequency Characteristics
SFECD10M7FA00-R0
Attenuation (dB)
G.D.T. (µsec.)
Frequency (MHz)
0
2
4
6
8
10
10
9
8
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
■ Frequency Characteristics (Spurious)
SFECD10M7FA00-R0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
8.700 9.700 10.700 11.700 12.700
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
11
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Chip Type SFECV Series
SFECV10M7 series for FM-receivers are monolithic type
ceramic filters which utilize the thickness expander
mode of the piezoelectric ceramic. SFECV series and
PFWCC(kHz filter for AM receiver) enable customers to
make AM/FM set so thin, and it can be of help to the
total chip circuit.
■ Features
1. Piezoelectric element is connected in the sandwich
shape by heat resistant substrate, thus it has
excellent mechanical strength, and it is
suitable for automatic mounting.
2. Various bandwidths are available. Select a suitable
type in accordance with the desired selectivity.
■ Applications
1. Small, thin radios
2. Automotive radios
3. Headphone steros
6.9±0.3
*
*
*
2.9±0.31.5±0.2
4.05±0.4
Bottom Electrode Side Electrode
1.2±0.5
1.0±0.5 1.0±0.5
1.2±0.3 1.2±0.5 1.5±0.2
(3) (2) (1)
(1) : Input
(2) : Ground
(3) : Output
** : EIAJ Monthly Code
** : Center Frequency Rank Code
: Marking
(in mm)
1.0±0.5
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFECV10M7KA00-R0 10.700 ±30kHz 110 ±30kHz 320 max. 6.0 ±2.0dB 35 min. 330
SFECV10M7JA00-R0 10.700 ±30kHz 150 ±40kHz 380 max. 5.5 ±2.0dB 35 min. 330
SFECV10M7HA00-R0 10.700 ±30kHz 180 ±40kHz 470 max. 4.0 ±2.0dB 35 min. 330
SFECV10M7GA00-R0 10.700 ±30kHz 230 ±50kHz 510 max. 3.5 ±2.0dB 35 min. 330
SFECV10M7FA00-R0 10.700 ±30kHz 280 ±50kHz 590 max. 3.0 ±2.0dB 35 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
12
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Standard Land Pattern Dimensions
(in mm)
Land
1.2
1.65
2.85 2.85
1.65
1.2 1.2
4.0
■ Test Circuit
(1) (3)
(2)
R2C2E2RF
Voltmeter
R1
E1
S.S.G.
=-10dBm
Rg
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF Volt Meter)
E1 : S.S.G. S.S.G. Output Voltage
(1): Input
(2): Ground
(3): Output
■ Frequency Characteristics
SFECV10M7KA00-R0
10.500 3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
10.600 10.700
Frequency (MHz)
Attenuation (dB)
10.800 10.900
G.D.T. (µsec.)
7
6
5
4
3
2
1
0
SFECV10M7JA00-R0
10.620 4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
10.660 10.700
Frequency (MHz)
Attenuation (dB)
10.740 10.780
G.D.T. (µsec.)
7
6
5
4
3
2
1
0
SFECV10M7HA00-R0
0
1
2
3
4
5
6
7
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
10.500 10.700 10.800 10.90010.600 Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
SFECV10M7GA00-R0
0 5.50
1 5.00
2 4.50
3 4.00
4 3.50
5 3.00
6 2.50
7 2.00
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
SFECV10M7FA00-R0
0 5.00
1 4.50
2 4.00
3 3.50
4 3.00
5 2.50
6 2.00
7 1.50
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
13
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics (Spurious)
SFECV10M7KA00-R0
8.700
70
60
50
40
30
20
10
0
9.700 10.700
Frequency (MHz)
Attenuation (dB)
11.700 12.700
SFECV10M7JA00-R0
8.700
70
60
50
40
30
20
10
0
9.700 10.700
Frequency (MHz)
Attenuation (dB)
11.700 12.700
SFECV10M7HA00-R0
0
10
20
30
40
50
60
70
8.700 10.7009.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
SFECV10M7GA00-R0
0
10
20
30
40
50
60
70
8.700 10.7009.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
SFECV10M7FA00-R0
0
10
20
30
40
50
60
70
8.700 10.7009.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
14
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Standard Lead Type
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
1. These miniature filters have high mechanical
strength.
2. Low loss, favorable waveform symmetry, and high
selectivity
3. Various band widths are available for applications
in wide to narrow bands.
4. Small dispersion and stable characteristics
5. Change in center frequency is typically within
+-30ppm/(degree C) at -20 to +80 (degree C).
6. High reliability
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7HA00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GA00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FA00-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFELA10M7HA00-B0 10.700 ±30kHz 180 ±40kHz 520 max. 7.0 max. 40 min. 330
SFELA10M7GA00-B0 10.700 ±30kHz 230 ±50kHz 570 max. 4.0 ±2.0dB 40 min. 330
SFELA10M7FA00-B0 10.700 ±30kHz 280 ±50kHz 650 max. 4.0 ±2.0dB 30 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
15
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELA10M7HA00-B0
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
0
1
2
3
4
5
6
710.500 10.600 10.700 10.800 10.900
Attenuation (dB)
G.D.T. (µsec.)
Frequency (MHz)
SFELA10M7GA00-B0
5.50
5.00
4.50
4.00
3.50
3.00
2.50
2.00
0
1
2
3
4
5
6
710.500 10.600 10.700 10.800 10.900
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
SFELA10M7FA00-B0
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
0
1
2
3
4
5
6
710.500 10.600 10.700 10.800 10.900
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
16
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics (Spurious)
SFELA10M7HA00-B0
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
SFELA10M7GA00-B0
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Attenuation (dB)
Frequency (MHz)
SFELA10M7FA00-B0
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
17
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Low Loss Type
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
1. Insertion loss is 1 to 1.5dB lower than
conventional products. These types are useful for
elevating the sensitivity of sets.
2. Small dispersion and stable characteristics
3. Excellent shape factor of frequency response
4. Good waveform symmetry (1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7JAA0-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7HAA0-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GAA0-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FAA0-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFELA10M7JAA0-B0 10.700 ±30kHz 150 ±40kHz 360 max. 4.5 ±2.0dB 35 min. 330
SFELA10M7HAA0-B0 10.700 ±30kHz 180 ±40kHz 470 max. 3.5 ±1.5dB 35 min. 330
SFELA10M7GAA0-B0 10.700 ±30kHz 230 ±50kHz 520 max. 3.0 ±2.0dB 35 min. 330
SFELA10M7FAA0-B0 10.700 ±30kHz 280 ±50kHz 590 max. 2.5 ±2.0dB 30 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
18
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELA10M7JAA0-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 7.50
Frequency (MHz)
G.D.T. (µsec.)
1 7.00
2 6.50
3 6.00
4 5.50
5 5.00
6 4.50
7 4.00
SFELA10M7HAA0-B0
Attenuation (dB)
0
1
2
3
4
5
6
710.500 10.600 10.700 10.800 10.900
6.50
6.00
5.50
5.00
4.50
4.00
3.50
3.00
Frequency (MHz)
G.D.T. (µsec.)
SFELA10M7GAA0-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
0
10.500 10.600 10.700 10.800 10.900
6.50
1 6.00
2 5.50
3 5.00
4 4.50
5 4.00
6 3.50
7 3.00
SFELA10M7FAA0-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
0 5.50
1 5.00
2 4.50
10.60010.500 10.700 10.800 10.900
3 4.00
4 3.50
5 3.00
6 2.50
7 2.00
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
19
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics (Spurious)
SFELA10M7JAA0-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7HAA0-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GAA0-B0
Frequency (MHz)
Attenuation (dB)
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
SFELA10M7FAA0-B0
Frequency (MHz)
Attenuation (dB)
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
20
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Low Profile Type
SFELB10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expancder mode
of the piezoelectric ceramic.
■ Features
1. Installed height is 6.0 mm, making it well suited
for compact, thin sets.
2. Environmental reliability is the same as those of
the ceramic filter SFELA10M7 series.
6.0 max.
(1) (2) (3)
7.5±2.0
5.0±1.0
3.0±1.0
2.5
±
0.2
2.5
±
0.2
1.3±0.1
0.3±0.1
0.5±0.1
1.5±0.1
E I A J
C O D E
M A R K I N G
in mm
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7KA00-B0
6.0 max.
(1) (2) (3)
7.5±2.0
5.0±1.0
3.0±1.0
2.5
±
0.2
2.5
±
0.2
1.3±0.1
0.3±0.1
0.5±0.1
1.5±0.1
E I A J
C O D E
M A R K I N G
in mm
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7JA00-B0
6.0 max.
(1) (2) (3)
7.5±2.0
5.0±1.0
3.0±1.0
2.5
±
0.2
2.5
±
0.2
1.3±0.1
0.3±0.1
0.5±0.1
1.5±0.1
E I A J
C O D E
M A R K I N G
in mm
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7HA00-B0
6.0 max.
(1) (2) (3)
7.5±2.0
5.0±1.0
3.0±1.0
2.5
±
0.2
2.5
±
0.2
1.3±0.1
0.3±0.1
0.5±0.1
1.5±0.1
E I A J
C O D E
M A R K I N G
in mm
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7GA00-B0
6.0 max.
(1) (2) (3)
7.5±2.0
5.0±1.0
3.0±1.0
2.5
±
0.2
2.5
±
0.2
1.3±0.1
0.3±0.1
0.5±0.1
1.5±0.1
E I A J
C O D E
M A R K I N G
in mm
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7FA00-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFELB10M7KA00-B0 10.700 ±30kHz 110 ±30kHz 350 max. 7.0 ±2.0dB 30 min. 330
SFELB10M7JA00-B0 10.700 ±30kHz 150 ±40kHz 360 max. 4.5 ±2.0dB 35 min. 330
SFELB10M7HA00-B0 10.700 ±30kHz 180 ±40kHz 470 max. 3.5 ±2.0dB 35 min. 330
SFELB10M7GA00-B0 10.700 ±30kHz 230 ±50kHz 570 max. 3.0 ±2.0dB 40 min. 330
SFELB10M7FA00-B0 10.700 ±30kHz 280 ±50kHz 650 max. 3.0 ±2.0dB 30 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
21
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELB10M7KA00-B0
Attenuation (dB)
10.620 10.660 10.700 10.740 10.780
0 8.00
Frequency (MHz)
G.D.T. (µsec.)
1 7.50
2 7.00
3 6.50
4 6.00
5 5.50
6 5.00
7 4.50
SFELB10M7JA00-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
1
10.700
7.00
10.60010.500 10.800 10.900
2 6.50
3 6.00
4 5.50
5 5.00
6 4.50
7 4.00
0 7.50
SFELB10M7HA00-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
0
10.70010.60010.500 10.800 10.900
7.00
1 6.50
2 6.00
3 5.50
4 5.00
5 4.50
6 4.00
7 3.50
SFELB10M7GA00-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.50
Frequency (MHz)
G.D.T. (µsec.)
1 6.00
2 5.50
3 5.00
4 4.50
5 4.00
6 3.50
7 3.00
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
22
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
SFELB10M7FA00-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
0
10.700 10.800 10.90010.60010.500
5.50
1 5.00
2 4.50
3 4.00
4 3.50
5 3.00
6 2.50
7 2.00
■ Frequency Characteristics (Spurious)
SFELB10M7KA00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELB10M7JA00-B0
Frequency (MHz)
Attenuation (dB)
10
10.700
20
30
40
50
60
70
0
9.7008.700 11.700 12.700
SFELB10M7HA00-B0
Frequency (MHz)
Attenuation (dB)
10
10.700
20
30
40
50
60
70
0
9.7008.700 11.700 12.700
SFELB10M7GA00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELB10M7FA00-B0
Frequency (MHz)
Attenuation (dB)
0
10
20
30
40
50
60
70 10.700 11.700 12.7009.7008.700
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
23
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Low Spurious Response Type
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
These types have lower spurious response compared
to the standard filters.
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
SFELA10M7KAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
SFELA10M7JAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
SFELA10M7HAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
SFELA10M7GAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
SFELA10M7FAB0-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFELA10M7KAB0-B0 10.700 ±30kHz 110 ±30kHz 350 max. 7.0 ±2.0dB 45/30 min. 330
SFELA10M7JAB0-B0 10.700 ±30kHz 150 ±40kHz 380 max. 5.5 ±2.0dB 45 min. 330
SFELA10M7HAB0-B0 10.700 ±30kHz 180 ±40kHz 520 max. 5.0 ±2.0dB 45 min. 330
SFELA10M7GAB0-B0 10.700 ±30kHz 230 ±50kHz 570 max. 3.0 ±2.0dB 45 min. 330
SFELA10M7FAB0-B0 10.700 ±30kHz 280 ±50kHz 650 max. 3.0 ±2.0dB 45 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to fo / fo to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
24
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELA10M7KAB0-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
0
10.700 10.740 10.78010.66010.620
8.00
1 7.50
2 7.00
3 6.50
4 6.00
5 5.50
6 5.00
7 4.50
SFELA10M7JAB0-B0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
0
10.700 10.800 10.90010.60010.500
7.00
1 6.50
6.00
3
2
5.50
4 5.00
5 4.50
6 4.00
7 3.50
SFELA10M7HAB0-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.50
Frequency (MHz)
G.D.T. (µsec.)
1 6.00
2 5.50
3 5.00
4 4.50
5 4.00
6 3.50
7 3.00
SFELA10M7GAB0-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.00
Frequency (MHz)
G.D.T. (µsec.)
1 5.50
2 5.00
3 4.50
4 4.00
5 3.50
6 3.00
7 2.50
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
25
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
SFELA10M7FAB0-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 5.00
Frequency (MHz)
G.D.T. (µsec.)
1 4.50
2 4.00
3 3.50
4 3.00
5 2.50
6 2.00
7 1.50
■ Frequency Characteristics (Spurious)
SFELA10M7KAB0-B0
Frequency (MHz)
Attenuation (dB)
0
10
20
30
40
50
60
70 10.700 11.700 12.7008.700 9.700
SFELA10M7JAB0-B0
Frequency (MHz)
Attenuation (dB)
0
10.700 11.700 12.7008.700 9.700
10
20
30
40
50
60
70
SFELA10M7HAB0-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GAB0-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7FAB0-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
26
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Wide Bandwidth Type
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
Realizes widerband characteristics not obtained by
conventional ceramic filters.
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7EA00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7DF00-B0
Part Number Center
Frequency (fo)
(MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFELA10M7EA00-B0 10.700 ±30kHz - 330 ±50kHz 680 max. 4.0 ±2.0dB 30 min. 330
SFELA10M7DF00-B0 - 10.700 fn±175 min. 950 max. 3.0 ±2.0dB 20 min. 470
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 8MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
(fn) means nominal center frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
27
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELA10M7EA00-B0
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0
1
2
3
4
5
6
710.300 10.500 10.700 10.900 11.100
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
SFELA10M7DF00-B0
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0
1
2
3
4
5
6
710.300 10.500 10.700 10.900 11.100
Attenuation (dB)
G.D.T. (µsec.)
Frequency (MHz)
■ Frequency Characteristics (Spurious)
SFELA10M7EA00-B0
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
SFELA10M7DF00-B0
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
28
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz Narrow Bandwidth Type
■ Features
SFELA10M7LFTA/KAH0, SFVLA/SFKLA series realizes
narrower band characteristics not obtained by
conventional ceramic filters. Besides, low spurious
and temperature characteristics are stable. This series
is suitable for European car-audio or AM up conversion
use that needs narrow band characteristics.
MARKING
7.0±2.0
2.5±0.2
0.5±0.1
1.4±0.1
1.65±0.1
2.5±0.2
7.0±2.05.0±1.03.0±1.0
0.3±0.1
(3) (2) (1)
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFVLA10M7MF00-B0
MARKING
7.0±2.0
2.5±0.2
0.5±0.1
1.4±0.1
1.65±0.1
2.5±0.2
7.0±2.05.0±1.03.0±1.0
0.3±0.1
(3) (2) (1)
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFVLA10M7LF00-B0
(1)
(2)
(3)
10.0±2.0
5.0±1.0
3.5
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
10.0±2.0
M A R K I N G
E I A J
C O D E
+1.5
–1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFKLA10M7NL00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7LFTA-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7KAH0-B0
Part Number Center
Frequency (fo)
(MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFVLA10M7MF00-B0 - 10.700 fn±13 min. 135 max. 5.0 ±2.0dB 35 min. 330
SFVLA10M7LF00-B0 - 10.700 fn±25 min. - 5.5 ±2.5dB 30 min. 330
SFKLA10M7NL00-B0 10.700 ±15kHz - 20 min. 95 max. 6.0 max. 24 min. 600
SFELA10M7LFTA-B0 - 10.700 fn±25 min. 280 max. 7.0 ±2.0dB 30 min. 330
SFELA10M7KAH0-B0 10.700 ±30kHz - 110 ±30kHz 350 max. 7.0 ±2.0dB 30 min. 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
29
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Center Frequency Rank Code (SFELA10M7KAH0-B0)
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFVLA10M7MF00-B0
Attenuation (dB)
10.620 10.660 10.700 10.740 10.780
0 19.0
Frequency (MHz)
G.D.T. (µsec.)
1 18.0
2 17.0
3 16.0
4 15.0
5 14.0
6 13.0
7 12.0
SFVLA10M7LF00-B0
Attenuation (dB)
10.620 10.660 10.700 10.740 10.780
0 13.0
Frequency (MHz)
G.D.T. (µsec.)
1 12.0
2 11.0
3 10.0
4 9.00
5 8.00
6 7.00
7 6.00
SFKLA10M7NL00-B0
Attenuation (dB)
10
0
10.600 10.650 10.700 10.750 10.800
Frequency (kHz)
SFELA10M7LFTA01-B0
0
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
1
2
3
4
5
6
7
8
910.580 10.640 10.700
Frequency (MHz)
10.760 10.820
Attenuation (dB)
G.D.T. (µsec.)
11.00
10.50
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
30
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
SFELA10M7KAH0-B0
8.00
7.50
7.00
6.50
6.00
5.50
5.00
4.50
0
1
2
3
4
5
6
710.620 10.660 10.700 10.740 10.780
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
■ Frequency Characteristics (Spurious)
SFVLA10M7MF00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFVLA10M7LF00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFKLA10M7NL00-B0
9.700
60
Frequency (MHz)
Attenuation (dB)
10.200 10.700 11.200 11.700
50
20
30
40
70
0
10
SFELA10M7LFTA01-B0
10.70010.2009.700
90
80
70
60
50
40
30
20
10
0
11.200 11.700
Attenuation (dB)
Frequency (MHz)
SFELA10M7KAH0-B0
10
20
30
40
50
60
0
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
31
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz for FM-IF Tuners
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
1. Little dispersion of amplitude characteristics and
phase characteristics (G. D. T. characteristics)
2. The SFELA10M7G_X series has G. D. T. characteristics
and is useful for obtaining low distortion.
SFELA10M7F_L series, in these ceramic filters,
being in harmony with flatness of G. D. T.,
roundness of the amplitude and selectivity
characteristics, therefore, these ceramic filters
are suitable to high-grade stereo tuners. Even in
mismatching conditions, they can keep little
distortion because of low Qm of ceramic material.
The SFELA10M7FA0G series is based on
SFELA10M7FA00/GA00/HA00, and it obtains high
selectivity with low loss.
There is little dispersion of amplitude and
G. D. T. characteristics, and low distortion rate
can be obtained.
3. All products are inspected the flatness of G. D. T.
characteristics.
MARKING
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
10.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1)
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7JAXE-B0
MARKING
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
10.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1)
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7HAXD-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7HA0G-B0
MARKING
EIAJ
CODE
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
11.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1) (in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GAXX-B0
MARKING
EIAJ
CODE
9.0 max.
0.5±0.1
1.7±0.1
1.38±0.2
11.0 max.5.0±1.0
4.0 max.
0.3±0.1
2.5±0.2 2.5±0.2
(3) (2) (1) (in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GAXA-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GALP03-B0
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
32
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GALM-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GA0G-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FALL-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FA0G-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
GDT Bandwidth
(kHz)
Input/Output
Impedance
(ohm)
SFELA10M7JAXE-B0 10.700 ±30kHz 150 ±30kHz 500 max. 14.0 max. 35 min. fo±50 min.[within 0.15µsec.] 330
SFELA10M7HAXD-B0 10.700 ±30kHz 180 ±30kHz 530 max. 14.0 max. 33 min. fo±60 min.[within 0.15µsec.] 330
SFELA10M7HA0G-B0 10.700 ±30kHz 180 ±40kHz 520 max. 7.0 max. 40 min. fo±45 min.[within 0.5µsec.] 330
SFELA10M7GAXX-B0 10.700 ±30kHz 250 ±40kHz 670 max. 12.0 max. 25 min. fo±110 min.[within 0.2µsec.] 330
SFELA10M7GAXA-B0 10.700 ±30kHz 220 ±40kHz 610 max. 12.5 max. 30 min. fo±80 min.[within 0.15µsec.] 330
SFELA10M7GALP03-B0 10.700 ±30kHz 250 ±50kHz 650 max. 10.0 max. 30 min. fo±65 min.[within 0.25µsec.] 330
SFELA10M7GALM-B0 10.700 ±30kHz 230 ±50kHz 600 max. 9.0 ±2.0dB 30 min. fo±60 min.[within 0.25µsec.] 330
SFELA10M7GA0G-B0 10.700 ±30kHz 230 ±50kHz 600 max. 7.0 max. 40 min. fo±60 min.[within 0.5µsec.] 330
SFELA10M7FALL-B0 10.700 ±30kHz 280 ±50kHz 700 max. 7.0 ±2.0dB 25 min. fo±70 min.[within 0.25µsec.] 330
SFELA10M7FA0G-B0 10.700 ±30kHz 280 ±50kHz 650 max. 4.0 ±2.0dB 30 min. fo±85 min.[within 0.5µsec.] 330
Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
33
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFELA10M7JAXE-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 5.00
Frequency (MHz)
G.D.T. (µsec.)
1 4.75
2 4.50
3 4.25
4 4.00
5 3.75
6 3.50
7 3.25
SFELA10M7HAXD-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 4.50
Frequency (MHz)
G.D.T. (µsec.)
1 4.25
2 4.00
3 3.75
4 3.50
5 3.25
6 3.00
7 2.75
SFELA10M7HA0G-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.00
Frequency (MHz)
G.D.T. (µsec.)
1 5.50
2 5.00
3 4.50
4 4.00
5 3.50
6 3.00
7 2.50
SFELA10M7GAXX-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.25
Frequency (MHz)
G.D.T. (µsec.)
1 3.00
2 2.75
3 2.50
4 2.25
5 2.00
6 1.75
7 1.50
SFELA10M7GAXA-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.75
Frequency (MHz)
G.D.T. (µsec.)
1 3.50
2 3.25
3 3.00
4 2.75
5 2.50
6 2.25
7 2.00
SFELA10M7GALP03-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.75
Frequency (MHz)
G.D.T. (µsec.)
1 3.50
2 3.25
3 3.00
4 2.75
5 2.50
6 2.25
7 2.00
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
34
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
SFELA10M7GALM-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 4.00
Frequency (MHz)
G.D.T. (µsec.)
1 3.75
2 3.50
3 3.25
4 3.00
5 2.75
6 2.50
7 2.25
SFELA10M7GA0G-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.00
Frequency (MHz)
G.D.T. (µsec.)
1 5.50
2 5.00
3 4.50
4 4.00
5 3.50
6 3.00
7 2.50
SFELA10M7FALL-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 3.25
Frequency (MHz)
G.D.T. (µsec.)
1 3.00
2 2.75
3 2.50
4 2.25
5 2.00
6 1.75
7 1.50
SFELA10M7FA0G-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 5.00
Frequency (MHz)
G.D.T. (µsec.)
1 4.50
2 4.00
3 3.50
4 3.00
5 2.50
6 2.00
7 1.50
■ Frequency Characteristics (Spurious)
SFELA10M7JAXE-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7HAXD-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7HA0G-B0
Attenuation (dB)
0
9.900 10.300 10.700 11.100 11.500
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GAXX-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
35
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFELA10M7GAXA-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GALP03-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GALM-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7GA0G-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7FALL-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFELA10M7FA0G-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
36
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 10.7MHz High Selectivity Type SFTLA Series
SFTLA10M7 series for FM-receivers are monolithic type
ceramic filters which use the thickness expander mode
of the piezoelectric ceramic.
■ Features
1. It has an excellent shape factor, and it is
possible to obtain 1.5 times more excellent
selectivity than SFELA10M7 series (by detuning
+-300 or 400kHz).
2. Good performance of spurious suppression
3. Having the same terminal pitch as the SFELA10M7
series, it easily replaces that series.
4. By replacing two SFELA10M7 series filters with one
SFTLA10M7 filter, more compact sets can be made.
5. Well-suited for 1-chip ICs
M A R K I N G
(1)(2)(3)
10.0±1.0
5.0±1.0
3.0±1.0
2.5±0.2
0.5±0.1
0.65±0.1
0.3±0.1
0.4±0.1
2.5±0.2
6.0±1.0
1.4±0.1
E I A J
C O D E
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFTLA10M7HA00-B0
M A R K I N G
(1)(2)(3)
10.0±1.0
5.0±1.0
3.0±1.0
2.5±0.2
0.5±0.1
0.65±0.1
0.3±0.1
0.4±0.1
2.5±0.2
6.0±1.0
1.4±0.1
E I A J
C O D E
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFTLA10M7GA00-B0
M A R K I N G
(1)(2)(3)
10.0±1.0
5.0±1.0
3.0±1.0
2.5±0.2
0.5±0.1
0.65±0.1
0.3±0.1
0.4±0.1
2.5±0.2
6.0±1.0
1.4±0.1
E I A J
C O D E
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFTLA10M7FA00-B0
Part Number Center
Frequency (fo)
(MHz)
3dB Bandwidth
(kHz) Attenuation
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation
(dB)
Input/Output
Impedance
(ohm)
SFTLA10M7HA00-B0 10.700 ±30kHz 180 ±40kHz 510 max. 5.5 ±2.5dB 50 min. 330
SFTLA10M7GA00-B0 10.700 ±30kHz 230 ±40kHz 650 max. 6.0 ±2.0dB 50 min. 330
SFTLA10M7FA00-B0 10.700 ±30kHz 280 ±50kHz 700 max. 6.0 ±2.0dB 50 min. 330
Attenuation Bandwidth : at 40dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]
Insertion Loss: at minimum loss point
Center frequency (fo) defined by the center of 3dB bandwidth.
(fn) means nominal center frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
37
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
■ Test Circuit
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Output
(3) :Ground
■ Frequency Characteristics
SFTLA10M7HA00-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 8.00
Frequency (MHz)
G.D.T. (µsec.)
1 7.50
2 7.00
3 6.50
4 6.00
5 5.50
6 5.00
7 4.50
SFTLA10M7GA00-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 7.00
Frequency (MHz)
G.D.T. (µsec.)
1 6.50
2 6.00
3 5.50
4 5.00
5 4.50
6 4.00
7 3.50
SFTLA10M7FA00-B0
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
0 6.00
Frequency (MHz)
G.D.T. (µsec.)
1 5.50
2 5.00
3 4.50
4 4.00
5 3.50
6 3.00
7 2.50
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
38
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics (Spurious)
SFTLA10M7HA00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFTLA10M7GA00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
SFTLA10M7FA00-B0
Attenuation (dB)
0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
10
20
30
40
50
60
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
CERAFILr 10.7MHz Related Data on Lead Type
39
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
SFELA10M7GA00-B0
Y20
Y40
Y20
0
W20
W40
0W20
Temperature (˚C)W40 W60 W80
Center frequency
Y20
Y2
Y1
0
W1
W2
0W20
Temperature (˚C)W40 W60 W80
Insertion loss
Y20
Y40
Y20
0
W20
W40
0W20
Temperature (˚C)W40 W60 W80
3dB Band width
Variation (kHz)Variation (dB)Variation (kHz)
SFELA10M7HA00-B0
Y20
Y40
Y20
0
W20
W40
0W20 W40 W60 W80
Y20
Y2
Y1
0
W1
W2
0W20 W40 W60 W80
Y20
Y40
Y20
0
W20
W40
0W20 W40 W60 W80
Temperature (˚C)
Center frequency
Temperature (˚C)
Insertion loss
Temperature (˚C)
3dB Band width
Variation (kHz)Variation (dB)Variation (kHz)
■ Matching Conditions
•When using ceramic filters, it is most important to
match the input/output load to impedance 330 ohm
(SFELA10M7DF00-B0 is 470 ohm and
SFKLA10M7NL00-B0 is 600 ohm matching).
Waveform symmetry is damaged when reactance is added
to the input/output load.
•Two ceramic filters directly connected can be used
for high selelctivity. For reducing waveform
variation, it is recommended to input a buffer AMP
between ceramic filters.
•The SFELA10M7 and SFTLA10M7 series are of
input/output symmetric structure so that in theory
there is no input/output directionality. Actual
circuits may use different input/output loading
conditions (for example, mismatched impedance) or
capacitance load. In such cases, the waveform will
be a little changed by the direction of the
input/output of the ceramic filters.
■ Loaded Resistance and Waveform (Rg+R1=330ohm)
SFELA10M7GA00-B0
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
R2=220ΩR2=330Ω
R2=560ΩR2=1kΩ
Attenuation (dB)Attenuation (dB)
Attenuation (dB)Attenuation (dB)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Group Delay Time (µsec.)Group Delay Time (µsec.)
Group Delay Time (µsec.)Group Delay Time (µsec.)
■ Loaded Capacitance and Waveform (Rg+R1=R2=330ohm)
SFELA10M7GA00-B0
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
0 1.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
C=10pF C=33pF
C=56pF C=82pF
Attenuation (dB)Attenuation (dB)
Attenuation (dB)Attenuation (dB)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Group Delay Time (µsec.)Group Delay Time (µsec.)
Group Delay Time (µsec.)Group Delay Time (µsec.)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
40
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 4.5-6.5MHz Chip Type SFSKA Series
SMD ceramic filter SFSKA_CF is a small and thin SMD
filter sealed with a metal cap.
Recommended for LCD-TVs, and small and thin tuners.
■ Features
1. High attenuation outside bandwidth
2. Small and thin pakage
3. Reflow-solderable (1) : Input
(2) : Ground
(3) : Output
7.9±0.2 3.0±0.1
8.5±0.2 3.8±0.2
1.8±0.2
0.5±0.1
0.6±0.2 1.0±0.1
1.3±0.2
2.5±0.2 2.5±0.2
0.3±0.1
1.3±0.2
(1) (2) (3) (in mm)
Part Number Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKA4M50CF00-R1 4.500 fn±60 min. 600 max. 6.0 max. 20 min.
[within 0 to fn] 15 min.
[within fn to 7.0MHz] 1000
Insertion Loss: at minimum loss point
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Land Pattern Dimensions
1.0 1.0
1.5 1.5
4.8
1.0
(in mm)
■ Test Circuit
E2
C2
R2 RF
Voltmeter
Rg
E1
R1
S.S.G.
(1) (2) (3)
R1+Rg=R2=1000Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1:S.S.G. Output voltage
(1) Input
(2) Ground
(3) Output
■ Frequency Characteristics
3.5 3.93.7 4.1 4.5 4.9 5.34.3
Attenuation (dB)
4.7
Frequency (MHz)
5.1 5.5
0
10
20
30
40
50
60
70
■ Frequency Characteristics (Spurious)
0.0 2.0 4.0
Attenuation (dB)
6.0
Frequency (MHz)
8.0 10.0
0
10
20
30
40
50
60
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
41
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series
As part of the environment protection activity, solder
for terminal plating and terminal-element connection
inside of ceramic filter SFSRA series contains no
lead (Pb).
This series also features thickness shear mode same
as SFSRH series (current type), which provides very
low spurious response within video signal band.
■ Features
1. Excellent spurious suppression characteristics
within video signal band.
2. Available 4 pass bandwidth variation to meet
various requests.
3. Low profile (H=7.0mm max.)
4. Lead dimension: Improved mounting reliability
(cut & clinch) due to round terminal.
M∗
10.0 max.
7.0
(Ref.)
2.5±0.2 2.5±0.2
7.0 max.3.5±0.5
0.48±0.1
0.9 (Ref.)
4.0 max.
3—0.8φ
(3) (2) (1) (in mm)
(1) : Input
(2) : Ground
(3) : Output
Part Number Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSRA4M50CF00-B0 4.500 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.0MHz] 1000
SFSRA4M50DF00-B0 4.500 fn±70 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.0MHz] 1000
SFSRA4M50EF00-B0 4.500 fn±125 min. 850 max. 6.0 max. 25 min.
[within 0 to fn] 18 min.
[within fn to 7.0MHz] 1000
SFSRA5M50BF00-B0 5.500 fn±50 min. 400 max. 8.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.5MHz] 600
SFSRA5M50CF00-B0 5.500 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to7.5MHz] 600
SFSRA5M50DF00-B0 5.500 fn±80 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.5MHz] 600
SFSRA5M74BF00-B0 5.742 fn±50 min. 400 max. 8.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.5MHz] 600
SFSRA5M74CF00-B0 5.742 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.5MHz] 600
SFSRA6M00CF00-B0 6.000 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 8.0MHz] 470
SFSRA6M00DF00-B0 6.000 fn±80 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 8.0MHz] 470
SFSRA6M50CF00-B0 6.500 fn±70 min. 650 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 8.5MHz] 470
SFSRA6M50DF00-B0 6.500 fn±80 min. 800 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 8.5MHz] 470
Insertion Loss: at minimum loss point
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
42
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
RF
Voltmeter
1
S.S.G.
Rg
R1
R2 C
32
Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)
■ Frequency Characteristics
SFSRA4M50CF00-B0
3.5 3.7 3.9 4.1 4.3 4.5
Frequency (MHz)
4.7 4.9 5.1 5.3 5.5
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA4M50DF00-B0
3.5 3.7 3.9 4.1 4.3 4.5
Frequency (MHz)
4.7 4.9 5.1 5.3 5.5
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA4M50EF00-B0
3.5 3.7 3.9 54 4.3 4.5
Frequency (MHz)
4.7 4.9 5.1 5.3 5.5
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M50BF00-B0
4.5 4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
5.7 5.9 6.1 6.3 6.5
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M50CF00-B0
4.5 4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
5.7 5.9 6.1 6.3 6.5
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M50DF00-B0
4.5 4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
5.7 5.9 6.1 6.3 6.5
50
60
70
40
30
20
10
0
Attenuation (dB)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
43
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
SFSRA5M74BF00-B0
4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
5.7 5.9 6.1 6.3 6.5 6.7
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M74CF00-B0
4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
5.7 5.9 6.1 6.3 6.5 6.7
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA6M00CF00-B0
5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
SFSRA6M00DF00-B0
Attenuation (dB)
Frequency (MHz)
5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0
50
60
70
40
30
20
10
0
SFSRA6M50CF00-B0
Attenuation (dB)
Frequency (MHz)
5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5
50
60
70
40
30
20
10
0
SFSRA6M50DF00-B0
Attenuation (dB)
Frequency (MHz)
5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5
50
60
70
40
30
20
10
0
■ Frequency Characteristics (Spurious)
SFSRA4M50CF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA4M50DF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
44
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFSRA4M50EF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M50BF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz) 6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M50CF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M50DF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M74BF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA5M74CF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA6M00CF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA6M00DF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
45
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFSRA6M50CF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
SFSRA6M50DF00-B0
0.0 1.0 2.0 3.0 4.0 5.0
Frequency (MHz)6.0 7.0 8.0 9.0 10.0
50
60
70
40
30
20
10
0
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
46
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 3.5-6.5MHz Low Profile Type SFSRL Series
SFSRL series are the Low-profile type of standard
SFSRA series.
■ Features
1. Installed height is 6.0mm, making it well suited
for compact, thin sets.
2. Electrical char. and performance are the same as
those of SFSRA series.
3. 2 types, narrow and middle bandwidth, are prepared.
5.0±1.0
0.5±0.1
1.1±0.1
10.0 max.
6.0 max.
M A R K I N G
E I A J
C O D E
4.0 max.
(3) (2) (1)
0.3±0.1
2.5 ±0.2±0.2 2.5
(in mm)
(1) : Input
(2) : Ground
(3) : Output
Part Number Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSRL4M50CF00-B0 4.500 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 7.0MHz] 1000
SFSRL4M50DF00-B0 4.500 fn±70 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 5.7MHz] 1000
SFSRL5M50CF00-B0 5.500 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 7.0MHz] 600
SFSRL5M50DF00-B0 5.500 fn±80 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 7.0MHz] 600
SFSRL6M00CF00-B0 6.000 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 7.5MHz] 470
SFSRL6M00DF00-B0 6.000 fn±80 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 7.5MHz] 470
SFSRL6M50CF00-B0 6.500 fn±70 min. 650 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 8.5MHz] 470
SFSRL6M50DF00-B0 6.500 fn±80 min. 800 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 8.0MHz] 470
Insertion Loss: at minimum loss point
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
RF
Voltmeter
1
S.S.G.
Rg
R1
R2 C
32
Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
47
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
SFSRL4M50CF00-B0
0
10
20
30
40
50
60
70 3.73.5 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
Attenuation (dB)
SFSRL4M50DF00-B0
3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
SFSRL5M50CF00-B0
0
10
20
30
40
50
60
70 4.74.5 4.9 5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5
Frequency (MHz)
Attenuation (dB)
SFSRL5M50DF00-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
4.5 4.7 4.9 5.1 5.3 5.5
Frequency (MHz)
5.7 5.9 6.1 6.3 6.5
SFSRL6M00CF00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.0 5.6 5.8 6.2 6.65.2 5.4 6.0 6.4 6.8 7.0
SFSRL6M00DF00-B0
0
10
20
30
40
50
60
70 5.25.0 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0
Frequency (MHz)
Attenuation (dB)
SFSRL6M50CF00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.5 6.1 6.3 6.7 7.15.7 5.9 6.5 6.9 7.3 7.5
SFSRL6M50DF00-B0
0
10
20
30
40
50
60
70 5.75.5 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5
Frequency (MHz)
Attenuation (dB)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
48
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFSRL4M50CF00-B0
0
10
20
30
40
50
60
70 1.00.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
Attenuation (dB)
SFSRL4M50DF00-B0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
SFSRL5M50CF00-B0
0
10
20
30
40
50
60
70 1.00.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
Attenuation (dB)
SFSRL5M50DF00-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
SFSRL6M00CF00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
SFSRL6M00DF00-B0
0
10
20
30
40
50
60
70 1.00.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
Attenuation (dB)
SFSRL6M50CF00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
SFSRL6M50DF00-B0
0
10
20
30
40
50
60
70 1.00.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
49
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/L Series
Chroma signals frequency conversion process is
involved in VCRs video signal processing circuit.
These SFSRA/SFSRH/SFSRL series are suitable for B.P.F.
■ Features
1. Frequency adjustment free.
2. Responsible for VHS. 8mm VCR system.
M∗
10.0 max.
7.0
(Ref.)
2.5±0.2 2.5±0.2
7.0 max.3.5±0.5
0.48±0.1
0.9 (Ref.)
4.0 max.
3—0.8φ
(3) (2) (1) (in mm)
(1) : Input
(2) : Ground
(3) : Output
SFSRA Series
5.0±1.0
0.5±0.1
1.1±0.1
10.0 max.
6.0 max.
M A R K I N G
E I A J
C O D E
4.0 max.
(3) (2) (1)
0.3±0.1
2.5 ±0.2±0.2 2.5
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFSRL Series
Part Number Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSRA4M43CF00-B0 4.430 fn±60 min. 600 max. 6.0 max. 30 min.
[within 0 to fn] 20 min.
[within fn to 7.0MHz] 1000
SFSRL4M32DF00-B0 4.320 fn±70 min. 750 max. 6.0 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 5.5MHz] 1000
SFSRL5M17DF00-B0 5.170 fn±70 min. 750 max. 7.5 max. 30 min.
[within 0 to fn] 15 min.
[within fn to 7.0MHz] 600
Insertion Loss: at minimum loss point
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
RF
Voltmeter
1
S.S.G.
Rg
R1
R2 C
32
Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
50
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
SFSRA4M43CF00-B0
70 4.74.54.3
Frequency (MHz)
Attenuation (dB)
4.1 5.3 5.55.14.93.93.5 3.7
60
50
40
30
20
10
0
SFSRL4M32DF00-B0
70
3.3 4.74.54.3
Frequency (MHz)
Attenuation (dB)
4.1 5.35.14.93.93.5 3.7
60
50
40
30
20
10
0
SFSRL5M17DF00-B0
0
10
20
30
40
50
60
70 4.44.2 4.6 4.8 5.0 5.2 5.4 5.6 5.8 6.0 6.2
Frequency (MHz)
Attenuation (dB)
■ Frequency Characteristics (Spurious)
SFSRA4M43CF00-B0
70
0.0 7.06.05.04.0 10.09.08.03.01.0 2.0
60
50
40
30
20
10
0
Frequency (MHz)
Attenuation (dB)
SFSRL4M32DF00-B0
70
0.0 7.06.05.04.0 10.09.08.03.01.0 2.0
60
50
40
30
20
10
0
Frequency (MHz)
Attenuation (dB)
SFSRL5M17DF00-B0
0
10
20
30
40
50
60
70 1.00.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
51
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz Chip Type PFWCC Series
PFWCC series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability, and adjustment-free operation.
Additionally its easy matching with IC helps create an
easy circuit design.
This is the most recommendable for portable radio with
small package. Especially, reflowable with SMD package.
■ Features
1. Center frequency range between 450 and 470 kHz
are available standard tolerance of +-2 kHz.
2. For frequency synthesizers, center frequencies
of 450, 459 and 468 kHz are available standard
tolerance of +-1 kHz.
5.7±0.3 4.0±0.2
1.2±0.2 1.2±0.2
5.0±0.3
1.0±0.21.0±0.2
1.5±0.2
OUT GND
IN GND
Input Mark
(2) (3)
(1) (4)
1.5±0.2
(in mm)
∗ ∗
Part Number Center
Frequency (fo)
(kHz)
3dB Bandwidth
(kHz) Selectivity (+)
(dB) Selectivity (-)
(dB) Insertion Loss
(dB)
Input/Output
Impedance
(ohm) Element
PFWCC450KS2A-R0 450 ±2.0kHz 5.5 ±1.5kHz 17 min.[fo+9kHz] 17 min.[fo-9kHz] 6.0 max. 3000 2
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Land Pattern Dimensions
6.0
1.5
4.0
1.2 1.2
6.0
(in:mm)
The solder resist should be printed except for the land
pattern on the P.C.B..
The material of P.C.B. is the epoxy resin of glass fabric
base (t=0.8mm)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
52
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recommended IFT
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
90
180pF
7×7mm IFT
(1)—(2) (2)—(3) (4)—(6)
85T 67T 23T
(Bottom view)
65
180pF
5×5mm IFT
(1)—(2) (2)—(3) (4)—(6)
84T 98T 33T
• Maching of CERAFILrPFWLA series with IFT is decided by the IFT secondary side
impedance, |Z2|. Set the |Z2| at about 4.2kΩ.
■ Test Circuit (CERAFILr Only)
(1) (2)
(4) (3)
S.S.G.
(Rg=50Ω)
3kΩ
RF
Voltmeter
3kΩ
■ Test Circuit (CERAFILr with IFT)
S.S.G.
(Rg=50Ω)
7pF
300kΩ
RF
Voltmeter
3kΩ
IFT
(1)
(4)
(1)
(3)
(2)
(2)
(3) (4)
(6)
■ Frequency Characteristics
IFT+PFWCC450KS2A-R0
70
60
50
40
30
20
10
0
Frequency (kHz)
Attenuation (dB)
430 440 450 460 470
■ Frequency Characteristics (Spurious)
IFT+PFWCC450KS2A-R0
70
60
50
40
30
20
10
0
0.000 1.000 2.000 3.000 4.000
Frequency (kHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
53
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz Chip Type SFPCA Series
SFPCA series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability and adjustment-free operation.
Additionally its easy matching with IC helps create an
easy circuit design.
■ Features
1. The filters are mountable by automatic placers
and can be reflow soldered and withstand
washing.
2. The filters are wide bandwidth and high
selectivity. So they are suitable for car radio
and multi band radio.
7.5±0.3
5.0max.
3.0±0.3
8.4max.
2.0±0.3
1.5±0.3
7.0±0.3
0.9±0.1
MARKING
EIAJ
CODE
2.0±0.3
(1) (2) (3)
1.5±0.3 1.6±0.3Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (+)
(dB) Selectivity (-)
(dB) Insertion Loss
(dB)
Input/Output
Impedance
(ohm) Element
SFPCA450KH1A-R1 450 ±1.0kHz fn±3.0 min. 40 min.[fn+9kHz] 40 min.[fn-9kHz] 6.0 max. 2000 4
SFPCA450KG1A-R1 450 ±1.0kHz fn±4.5 min. 40 min.[fn+10kHz] 40 min.[fn-10kHz] 6.0 max. 1500 4
SFPCA450KF4A-R1 450 ±1.5kHz fn±6.0 min. 40 min.[fn+12.5kHz] 40 min.[fn-12.5kHz] 6.0 max. 1500 4
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Land Pattern Dimensions
(in mm)
2.02.475 6.95
1.61.55 7.45 0.80.9
0.925 2.0 2.0
1.1
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
54
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recommended IFT
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
40
180pF
SFPCA
(1)—(2) (2)—(3) (4)—(6)
60T 125T 28T
(Bottom view)
• Matching of CERAFILrSFPCA series with IFT is decided by the Qu of IFT
and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because
a Qu value which is too high (e.g.,90) may produce ripple in the waveform.
It is recommended to match the impedance of |Z2| with that of the
CERAFILr.
■ Test Circuit
Rg+R1=R2=Input/Output Impedance
E1
R1
Rg
S.S.G.
0dBm
(1)
(2)
(3)
R2 E2 RF Voltmeter
Connection
(1):Input
(2):Ground
(3):Output
■ Frequency Characteristics
SFPCA450KH1A-R1
100
40
30
20
10
0
Attenuation (dB)
200
400
G.D.T. (µsec.)
425 450 475
Frequency (kHz)
90
80
70
60
50
360
280
320
240
160
120
80
40
0
SFPCA450KG1A-R1
100
40
30
20
10
0
Attenuation (dB)
0
200
400
G.D.T. (µsec.)
425 450 475
Frequency (kHz)
90
80
70
60
50
360
320
280
240
160
120
80
40
SFPCA450KF4A-R1
400
100
40
30
20
10
0
Attenuation (dB)
G.D.T. (µsec.)
425 450 475
Frequency (kHz)
90
80
70
60
50
0
240
280
320
360
40
80
120
160
200
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
55
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz SFULA/SFZLA Series
SFULA/SFZLA series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability, and adjustment-free operation.
Additionally its easy matching with IC helps create
an easy circuit design.
■ Features
1. Center frequency range between 450 to 470 kHz
are available standard tolerance of +-2 kHz.
2. For frequency synthesizers, center frequencies
of 450, 459 and 468 kHz are available standard
tolerance of +-1 kHz.
MARKING
9.0±0.3
(1)(2)(3)
7.0±0.3
3.5±0.3
3.5
1.75±0.5
1.1±0.1
0.8±0.1
2.5±0.22.5±0.2
0.25
0.1
EIAJ
CODE
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
+1.0
-0.5
SFULA Series
MARKING
9.0±0.3
7.0±0.3
7.0±0.5
3.5
3.5
±
0.5
1.1±0.1
0.8±0.1
2.5±0.2 2.5±0.2
0.25
0.1
EIAJ
CODE
(1) (2) (3)
(4)(5)(6)
1.75
±0.5
Connection
(1) : Input
(2)(5) : Ground
(3)(4) : Direct connection
(6) : Output (in mm)
+1.0
-0.5
SFZLA Series
Part Number Center
Frequency (fo)
(kHz)
3dB Bandwidth
(kHz) Selectivity (+)
(dB) Selectivity (-)
(dB) Insertion Loss
(dB)
Input/Output
Impedance
(ohm) Element
SFULA455KU2A-B0 455 ±2.0kHz 10.0 ±3.0kHz 4 min.[fo+10kHz] 6 min.[fo-10kHz] 5.0 max. 3000 1
SFULA455KU2B-B0 462 ±2.0kHz 10.0 ±3.0kHz 4 min.[fo+10kHz] 6 min.[fo-10kHz] 5.0 max. 3000 1
SFZLA455KN2A-B0 455.5 ±2.0kHz 4.0 ±1.0kHz 23 min.[fo+9kHz] 23 min.[fo-9kHz] 7.0 max. 3000 2
SFZLA455KS2A-B0 456 ±2.0kHz 5.5 ±1.0kHz 18 min.[fo+9kHz] 18 min.[fo-9kHz] 7.0 max. 3000 2
SFZLA455KT2A-B0 456 ±2.0kHz 7.0 ±1.0kHz 16 min.[fo+9kHz] 16 min.[fo-9kHz] 6.0 max. 3000 2
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Frequency Characteristics (CERAFILr with IFT)
Part Number Input Level (at 0.6mV output)
(dB)
Selectivity
6dB Band Width
(kHz) +9kHz off (dB)
IFT+SFULA455KU2B-B0
IFT+SFZLA455KN2A-B0
IFT+SFZLA455KS2A-B0
IFT+SFZLA455KT2A-B0
6.5
5.0
7.0
8.5
78
78
78
78
38
33
27
20
-9kHz off (dB)
23
Typ. value
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
56
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recommended IFT (7x7)
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
105
180pF
SFULApL
(1)—(2) (2)—(3) (4)—(6)
70T 115T 7T
(Bottom view)
90
180pF
SFZLApL
(1)—(2) (2)—(3) (4)—(6)
68T 84T 14T
• Maching of CERAFILrSFULA/SFZLA series with IFT is decided by the IFT secondary side
impedance, |Z2|. The design target values of |Z2| are :
For SFULApL : 300Ω
For SFZLApL : 1kΩ
■ Test Circuit (CERAFILr Only)
SFULA Series
(1) (3)
(2)
S.S.G.
(Rg=50Ω)
3kΩ
RF
Voltmeter
3kΩ
SFZLA Series
S.S.G.
(Rg=50Ω)
3kΩ
RF
Voltmeter
3kΩ
(1)
(2)
(3)
(6)
(5)
(4)
■ Test Circuit (CERAFILr with IFT)
SFULA Series
S.S.G.
(Rg=50Ω)
7pF
300kΩ
RF
Voltmeter
3kΩ
IFT (1)
(2)
(2)
(4)
(6)
(3)
(3)
(1)
SFZLA Series
S.S.G.
(Rg=50Ω)
7pF
300kΩ
RF
Voltmeter
3kΩ
IFT
(1)
(1)
(2)
(3)
(6)
(5)
(4)
(2)
(3) (4)
(6)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
57
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
IFT+SFULA455KU2B-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
435 445 455 465 475
Frequency (kHz)
IFT+SFZLA455KN2A-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
435 445 455 465 475
Frequency (kHz)
IFT+SFZLA455KS2A-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
435 445 455 465 475
Frequency (kHz)
IFT+SFZLA455KT2A-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
435 445 455 465 475
Frequency (kHz)
■ Frequency Characteristics (Spurious)
IFT+SFULA455KU2B-B0
70
60
80
50
40
30
20
10
0
Frequency (MHz)
Attennation (dB)
012345678910
IFT+SFZLA Series
70
60
80
50
40
30
20
10
0
0 1 2 3 4 5 6 7 8 9 10
Frequency (MHz)
Attennation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
58
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz PFSLA/PFWLA Series
PFSLA/PFWLA series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability, and adjustment-free operation.
Additionally its easy matching with IC helps create
an easy circuit design.
This is the most recommendable for portable radios
with small package.
■ Features
1. Center frequency range between 450 to 470 kHz
are available standard tolerance of +-2 kHz.
2. For frequency synthesizers, center frequencies
of 450, 459 and 468 kHz are available standard
tolerance of +-1 kHz.
1.4±0.1
6.0±1.0
1.4±0.1
0.5±0.1
2.5±0.2 2.5±0.2
0.3±0.1
3.0±1.0 5.0±1.0 5.0±1.0
(3) (1)(2)
(1) Input
(2) Ground
(3) Output
∗ : EIAJ Monthly Code
Marking :
(in mm)
∗
PFSLA Series
(3) (2) (1)
0.3±0.1
3.0±1.0
2.5±0.2 2.5±0.2
Marking :
(1) Input
(2) Ground
(3) Output
: Vender's Code
: EIAJ monthly Code
1.4±0.1
1.4±0.1
0.5±0.1
5.0±1.0 6.2 max.
6.0±1.0
(in mm)
PFWLA Series
Part Number Center
Frequency (fo)
(kHz)
3dB Bandwidth
(kHz) Selectivity (+)
(dB) Selectivity (-)
(dB) Insertion Loss
(dB)
Input/Output
Impedance
(ohm) Element
PFSLA455KP2A-B0 455 ±2.0kHz 4.5 ±1.5kHz 8 min.[fo+9kHz] 8 min.[fo-9kHz] 5.0 max. 3000 1
PFWLA450KP2A-B0 450 ±2.0kHz 4.5 ±1.5kHz 19 min.[fo+9kHz] 19 min.[fo-9kHz] 7.0 max. 3000 2
PFWLA450KS2A-B0 450 ±2.0kHz 5.5 ±1.5kHz 17 min.[fo+9kHz] 17 min.[fo-9kHz] 6.0 max. 3000 2
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 3dB bandwidth.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
59
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recommended IFT
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
90
180pF
7×7mm IFT
(1)—(2) (2)—(3) (4)—(6)
85T 67T 23T
(Bottom view)
65
180pF
5×5mm IFT
(1)—(2) (2)—(3) (4)—(6)
84T 98T 33T
• Maching of CERAFILrPFWLA series with IFT is decided by the IFT secondary side
impedance, |Z2|. Set the |Z2| at about 4.2kΩ.
■ Test Circuit (CERAFILr Only)
PFSLA/PFWLA Series
S.S.G.
(Rg=50Ω)
3kΩ
RF
Voltmeter
3kΩ
(1) (3)
(2)
■ Test Circuit (CERAFILr with IFT)
PFSLA/PFWLA Series
S.S.G.
(Rg=50Ω)
7pF
RF
Voltmeter
3kΩ
IFT
(1)
(1) (3)
(2)
(2)
(3) (4)
(6)
300kΩ
■ Frequency Characteristics
IFT+PFSLA455KP2A-B0
70
60
50
40
30
20
10
0
435 445 455 465 475
Frequency (kHz)
Attenuation (dB)
IFT+PFWLA450KS2A-B0
70
60
50
40
30
20
10
0
Frequency (kHz)
Attenuation (dB)
430 440 450 460 470
■ Frequency Characteristics (Spurious)
IFT+PFSLA455KP2A-B0
70
60
50
40
30
20
10
0
0.000 1.000 2.000 3.000 4.000
Frequency (kHz)
Attenuation (dB)
IFT+PFWLA450KS2A-B0
70
60
50
40
30
20
10
0
0.000 1.000 2.000 3.000 4.000
Frequency (kHz)
Attenuation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
60
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz SFPLA/CFWLA Series
■ Features
SFPLA/CFWLA series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability, high attenuation, and adjustment-free
operation. Additionally its easy matching with IC
helps create an easy circuit design.
This is the most recommendable for car-stereo and
all band radio with high attenuation.
3.0
±
0.3
7.0±0.3
4.2±0.3
7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7
±
0.3
(1)(2)
(3)
0.3±0.1
1.5max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
SFPLA Series
4.3±0.3
0.15
1.5max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1) : Input
(2)(3)(4) : Ground
(5) : Output
(in mm)
2.92.9——0.30.3
2.9±0.3
CFWLA Series
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (+)
(dB) Selectivity (-)
(dB) Insertion Loss
(dB)
Input/Output
Impedance
(ohm) Element
SFPLA450KJ1A-B0 450 ±1.0kHz fn±2.0 min. 40 min.[fn+7.5kHz] 40 min.[fn-7.5kHz] 6.0 max. 2000 4
SFPLA450KH1A-B0 450 ±1.0kHz fn±3.0 min. 40 min.[fn+9kHz] 40 min.[fn-9kHz] 6.0 max. 2000 4
CFWLA450KJFA-B0 450 (fn) fn±2.0 min. 50 min.[fn+7.5kHz] 50 min.[fn-7.5kHz] 7.0 max. 2000 6
CFWLA450KHFA-B0 450 (fn) fn±3.0 min. 50 min.[fn+9kHz] 50 min.[fn-9kHz] 6.0 max. 2000 6
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Recommended IFT (7x7)
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
40
180pF
SFPLA/CFULA/CFWLA
(1)—(2) (2)—(3) (4)—(6)
60T 125T 28T
(Bottom view)
• Matching of CERAFILrSFPLA/CFULA/CFWLA series with IFT is decided
by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at
about 40 because a Qu value which is too high (e.g.,90) may produce
ripple in the waveform. It is recommended to match the impedance of |Z2|
with that of the CERAFILr.
■ Test Circuit
Input Output
R1
Rg
SSG
Ground
R2 RF
Voltmeter
Rg+R1 =R2 : Input/Output Impedance
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
61
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
IFT+SFPLA450KH1A-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
430 440 450 460 470
Frequency (kHz)
IFT+CFWLA450KHFA-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
Frequency (kHz)
Attennation (dB)
■ Frequency Characteristics (Spurious)
IFT+SFPLA450KH1A-B0
70
60
80
50
40
30
20
10
0
012345678910
Frequency (kHz)
Attennation (dB)
IFT+CFWLA450KHFA-B0
70
60
80
50
40
30
20
10
0
012345678910
Frequency (kHz)
Attennation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
62
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series
■ Features
SFPLA/CFWLA/CFULA series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability, high attenuation, and adjustment-free
operation. Additionally its easy matching with IC
helps create an easy circuit design.
Especially, CFULA/CFWLA_Y series is the frequency
fidelity in the high sound area of an AM stereo will
be improved with wide band, flat group delay time
characteristics.
3.0
±
0.3
7.0±0.3
4.2±0.3
7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7
±
0.3
(1)(2)
(3)
0.3±0.1
1.5max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
SFPLA Series
4.3±0.3
0.15
1.5max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1) : Input
(2)(3)(4) : Ground
(5) : Output
(in mm)
2.92.9——0.30.3
2.9±0.3
CFWLA Series
3.0±0.3 7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7±0.3
(1)(2)
(3)
0.3±0.1
1.5max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
in mm
CFULA Series
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (+)
(dB) Selectivity (-)
(dB) Insertion Loss
(dB)
GDT 20µsec.
Bandwidth
(kHz)
Input/Output
Impedance
(ohm) Element
SFPLA450KG1A-B0 450 ±1.0kHz fn±4.5 min. 30 min.[fn+9kHz] 30 min.[fn-9kHz] 6.0 max. - 2000 4
SFPLA450KF1A-B0 450 ±1.0kHz fn±6.0 min. 40 min.[fn+12.5kHz] 40 min.[fn-12.5kHz] 6.0 max. - 2000 4
SFPLA450KE1A-B0 450 ±1.0kHz fn±7.5 min. 40 min.[fn+15kHz] 40 min.[fn-15kHz] 6.0 max. - 1500 4
SFPLA450KD1A-B0 450 ±1.0kHz fn±10.0 min. 40 min.[fn+20kHz] 40 min.[fn-20kHz] 4.0 max. - 1500 4
CFWLA450KGFA-B0 450 (fn) fn±4.5 min. 50 min.[fn+10kHz] 50 min.[fn-10kHz] 6.0 max. - 2000 6
CFWLA450KFFA-B0 450 (fn) fn±6.0 min. 50 min.[fn+12.5kHz] 50 min.[fn-12.5kHz] 6.0 max. - 2000 6
CFWLA450KEFA-B0 450 (fn) fn±7.5 min. 50 min.[fn+15kHz] 50 min.[fn-15kHz] 6.0 max. - 1500 6
CFWLA450KDFA-B0 450 (fn) fn±10.0 min. 50 min.[fn+20kHz] 50 min.[fn-20kHz] 4.0 max. - 1500 6
CFWLA450KG1Y-B0 450 ±1.0kHz fn±4.5 min. 50 min.[fn+15kHz] 50 min.[fn-15kHz] 11.0 max. fn±4.0 2000 6
CFULA450KG1Y-B0 450 ±1.0kHz fn±4.5 min. 40 min.[fn+15kHz] 40 min.[fn-15kHz] 10.0 max. fn±4.5 2000 4
CFWLA450KF1Y-B0 450 ±1.0kHz fn±6.0 min. 50 min.[fn+17.5kHz] 50 min.[fn-17.5kHz] 10.0 max. fn±5.0 2000 6
CFULA450KF1Y-B0 450 ±1.0kHz fn±6.0 min. 40 min.[fn+17.5kHz] 40 min.[fn-17.5kHz] 9.0 max. fn±6.0 2000 4
CFWLA450KD1Y-B0 450 ±1.0kHz fn±10.0 min. 50 min.[fn+25kHz] 50 min.[fn-25kHz] 8.0 max. fn±8.0 1500 6
CFULA450KD1Y-B0 450 ±1.0kHz fn±10.0 min. 40 min.[fn+25kHz] 40 min.[fn-25kHz] 7.0 max. fn±9.0 1500 4
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
63
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recommended IFT (7x7)
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
40
180pF
SFPLA/CFULA/CFWLA
(1)—(2) (2)—(3) (4)—(6)
60T 125T 28T
(Bottom view)
• Matching of CERAFILrSFPLA/CFULA/CFWLA series with IFT is decided
by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at
about 40 because a Qu value which is too high (e.g.,90) may produce
ripple in the waveform. It is recommended to match the impedance of |Z2|
with that of the CERAFILr.
■ Test Circuit
Input Output
R1
Rg
SSG
Ground
R2 RF
Voltmeter
Rg+R1 =R2 : Input/Output Impedance
■ Frequency Characteristics
IFT+SFPLA450KF1A-B0
0
10
20
30
40
50
60
70
Attenuation (dB)
430 440 450 460 470
Frequency (kHz)
IFT+CFWLA450KFFA-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
Frequency (kHz)
Attennation (dB)
IFT+CFULA450KF1Y-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
200
100
0
Group Delay Time (µsec.)
Frequency (kHz)
Attennation (dB)
IFT+CFWLA450KF1Y-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
200
100
0
Group Delay Time (µsec.)
Frequency (kHz)
Attennation (dB)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
64
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
CERAFILr 455kHz for Search-stop Signal Detection
BFULA series are narrow bandwidth filters. This filter
is used in the application which detects the carrier
peak with a narrow bandwidth amplifier, or an electronic
tuner as a stop signal detector.
■ Features
Most suitable for IC Station Detectors (SD).
0.25±0.05
5.0±0.2 (in mm)
MARKING
EIAJ
CODE
3.5±0.5 9.0±0.3 3.5±0.3
1.5max.
0.1±0.05
1.75±0.5
0.8±0.1
1.1±0.1
7.0±0.3
No directivity
Part Number Resonant Frequency (Fr)
(kHz) Delta F (Fa-Fr)
(kHz) Resonant Resistance
(ohm) Capacitance
(pF)
BFULA450KC-B0 450 ±1.0kHz 14.0 ±2.0kHz 20 max. 360 ±20%
BFULA450KC004-B0 450 ±0.8kHz 9.0 ±2.0kHz 30 max. 360 ±20%
BFULA450KK003-B0 450 ±1.0kHz 27.5 ±4.5kHz 30 max. 550 ±20%
fa-fr means difference between the anti-resonant frequency and the resonant frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Impedance Characteristics
BFULA450KC004-B0
445 450 455 460
500k
100k
50k
10k
5k
1k
500
100
50
10
5
1
Impedance (ohm)
Frequency (kHz)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
CERAFILr 455kHz SF/PF Series Temperature Characteristics
65
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ SFZLA455KS2A-B0
-
20 0
20 40 60 80
-
1
0
+1
-
20 0
20 40
60 80
-
1
0
-
1
+1
-
20 0
20 40 60 80
0
+1 Temperature (D)
Temperature (D)
Temperature (D)
Center Frequency
(kHz)
3dB Band Width
(kHz)
Insertion Los
(dB)
■ SFPLA450KH1A-B0
-
20 020 40 60 80
-
1
0
+1
-
20
020 40
60 80
-
1
0
-
1
+1
-
20 0
20 40 60 80
0
+1
Center Frequency
(kHz)
3dB Band Width
(kHz)
Insertion Los
(dB)
Temperature (D)
Temperature (D)
Temperature (D)
■ PFWLA450KS2A-B0
-
20 0
20 40 60 80
-
1
0
+1
-
20 020
40 60
80
-
1
0
+1
-
20
020 40 60 80
-
1
0
+1
Center Frequency
(kHz)
3dB Band Width
(kHz)
Insertion Los
(dB)
Temperature (D)
Temperature (D)
Temperature (D)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
CERAFILr 455kHz SF/PF/BF Series Application Circuit
66
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Car Radio
SFPLA450KH1A-B0/BFULA450KC004-B0
BFULA450KC004-B0
100k 10k
10k
Vtune
Vco(+8v)
20 19 18 17 16 14 13 12 11
10987654321
Station Det Out
430P
CF2
0.047µ
4.7µ7.5k
3.3µ
100µ
75
ANT
100k
100k
100k
3.3mH
51
47µ
0.022µ
0.022µ
0.022µ
0.022µ
0.047µ
x2
0.022µ
22µ
2SK315 1µ
0.033µ
0.022µ
CF1
CF1: PFWLA450KS1A-B0
SFZLA450KS1A-B0
SFPLA450KH1A-B0
100
0.47µ
2.7k
0.01µ
0.047µ
82
+
+
+
15
100µH
0.022µ
AF Out
LA1135(SANYO)
R
C
L
: Ω
: F
: H
Unit
PFSLA455KP2A-B0/PFWLA450KS2A-B0
µPC1216V2 (NEC)
0.01
µ
0.01
µ
1
µ
Det.
Output
Vcc
(+13V)
100
10
µ
22µ
22µ
4.7µH
Ant
Input
22µ0.033µ
3.3µ
4.7
µ
100µ
0.022µ
100p
120
PFSLA455KP2A-B0
560p
51p
3300p
2200p
3k
10k
220p
4.7k
PFWLA450KS2A-B0
1 193 5 7 9 11 13 15 17
2 184 6 8 10 12 14 16
33p
R
C
L
: Ω
: F
: H
Unit
■ Portable Radio
SFULA455KU2B-B0
+
+
+
+
+
+
+
+
1917679 14 225 26 15
8
28
27
3244212322
1
RIPPLE
FILTER
REGULATOR
TUNING
METER
VOL
CXA1019M (SONY)
FM IF
AMP
DETECTOR
AF
PRE/POWER
AMP
AM IF
AMP
DETECTOR
FM
FRONT
END
AM
FRONT
END
FM
BPF
10
13
12
20 161811 5
AGC
AMP
FM PF FM OSC
METER
AM IF
IN
Vcc
SP
AF IN
VOL
AM OSC
AM ANT
DEP
OUT
FM/AM
BAND SELECT
REG
OUT
FM DISCRI
FM IF
IN
FM CERAFIL®
(SFELA10M7FA00-B0) CERAMIC DISCRIMINATOR
(CDALA10M7CA001-B0)
IF
OUT
AM CERAFIL®
(SFULA455KU2B-B0)
R
R
C
L
: Ω
: F
: H
Unit
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
CERAFILr 455kHz SF/PF/BF Series Application Circuit
67
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Portable Radio
SFULA455KU2B-B0
L3
20p
22p
330p
8p
33k
22k
100k
5p
IS2236
CSBLA456
KE2ZF16-B0
CDALA10
M7GA16-B0
SFULA455
KU2B-B0 SFELA10
M7FA00-B0
TA8122AN (TOSHIBA)
100k
L1T1L2
15p
LPF1
MO AM
FM
ST
LPF2 VCO
L
++
-
+
+
-
+
-
-
-
FM
PF
AM
PF FM
OSC AM
OSC DEF
OUT MPX
IN OUT
LOUT
R
QUAD
ST
LED
+
-
TUN
LED
FM
IF IN
AM
IF IN
AM
AGC
FM
RF IN AM
MIX
FM
MIX GND2
Vcc2GND1
T2
OUT
IN Vcc1
10µ
0.022µ
0.1µ
4.7µ
4.7µ
0.015µ
0.033µ
33µ
10µ
0.015µ
0.1µ
22µ
0.022µ
560
560
24 23 22 20 19 18 17 16 15 14 13
654321 7 8 9 10 11 12
21
R
Vcc
+
-
(3V)
ST
DECODER
Phase
COM
Phase
COM
VCO
Freq
Divider HYS SW
ST
LED
TUN
LED
L
DET
FM
DET
FM
IF
AF PRE
AM
DET
AM
AGC
AM
MIX
AM
MIX
FM
OSC AM
OSC
AM/FM
MONO SW
AM
IF
FM
RF
AM
RF
BPF
R
C
L
: Ω
: F
: H
Unit
■ In Tr Circuit
BFULA450KK003-B0
RF
Volt meter
BFULA
450KK003-B0
S.S.G.
(10mV)
1mA
3k
1k
5k 15k
3k
0.01µ
0.01µ
+6V
R
C
L
: Ω
: F
: H
Unit
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
68
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
SMD ceramic trap TPSKA_B is small and thin SMD trap
sealed with a metal cap. Recommended for LCD-TVs, and
small and thin tuners.
■ Features
1. High attenuation and high performance group
delay time
2. Small and thin pakage
3. Reflow-solderable (1) : Input
(2) : Ground
(3) : Output
7.9±0.2 3.0±0.1
8.5±0.2 3.8±0.2
1.8±0.2
0.5±0.1
0.6±0.2 1.0±0.1
1.3±0.2
2.5±0.2 2.5±0.2
0.3±0.1
1.3±0.2
(1) (2) (3)
(in mm)
Part Number Nominal Center
Frequency (fn1)
(MHz)
Attenuation
(at fn1)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPSKA4M50B00-R1 4.500 35 min. 50 min.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Land Pattern Dimensions
1.0 1.0
1.5 1.5
4.8
1.0
■ Test Circuit
RF
Voltmeter
Rg
R1
L
S.S.G.
Rg=50Ω
R1=330Ω
R2=1.0kΩ
L=15µH
50ΩR2
■ Frequency Characteristics
Attenuation (dB)
Frequency (MHz)
4.0 4.24.1 4.3 4.5 4.7 4.94.4 4.6 4.8 5.0
0
10
20
30
40
50
60
70
■ Frequency Characteristics (Spurious)
Attenuation (dB)
Frequency (MHz)
0 1.0 2.0 3.0 4.0 5.0
G.D.T. (nsec)
0
10
20
30
40
50
60
70
80
700
600
500
400
300
200
100
0
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
69
24
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series
SMD ceramic trap TPWKA is small and thin SMD trap
sealed with a metal cap. Recommended for LCD-TVs, and
small and thin tuners.
This series consist of 2 wafers with 2 trap
frequencies. Recommended for Multi standard set.
■ Features
1. Good performance of attenuation
2. Small and thin package
3. Reflow-solderable
M∗
7.9±0.2 4.2±0.1
8.5±0.2 5.0±0.2
0.4±0.2 1.0±0.1
0.3±0.1
0.4±0.1
1.5±0.2
1.3±0.2
1.3±0.2
2.5±0.2 2.5±0.2
(1) : Input or Output
(2) : Ground
(3) : Output or Input
(in mm)
(1) (2) (3)
Part Number Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPWKA5M50B04-R1 5.500 5.742 30 min. 30 min. 50 min.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Land Pattern Dimensions
1.2
1.3 1.3
1.2 1.2
1.91.9
5.8
(in mm)
■ Test Circuit
50Ω
L = 8.2 µH
RF
Voltmeter
R1
R2
Rg
Rg = 50 Ω
R1 = 150 Ω
R2 = 330 Ω
C2 = 10pF (Including stray capacitance and input capacitance of RF voltmeter)
L
S.S.G.
C2
■ Frequency Characteristics
4.5 4.7 4.9 5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
■ Frequency Characteristics (Spurious)
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
70
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series
As part of the environment protection activity, solder
for terminal plating and terminal-element connection
inside of ceramic filter TPSRA series contain no
lead (Pb).
This series consist of two trap element on one wafer.
Suitable for the sound IF trap of CTV/VCR.
■ Features
1. Good performance of attenuation
2. Shape factor can be changed by the value of
Inductor "L".
3. Three-terminals type
4. Low profile (H=7.0mm max.)
5. Lead dimension:
Improved mounting reliability (cut & clinch) due to
round terminal.
M∗
10.0 max.
7.0
(Ref.)
2.5±0.2 2.5±0.2
(3) (2) (1)
(1) : Input
(2) : Ground
(3) : Output
7.0 max.3.5±0.5
0.48±0.1
0.9 (Ref.)
4.0 max.
3—0.8φ
(in mm)
Part Number Nominal Center
Frequency (fn1)
(MHz)
Attenuation
(at fn1)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPSRA4M50B00-B0 4.500 35 min. 50 min.
TPSRA4M50C00-B0 4.500 30 min. -
TPSRA5M50B00-B0 5.500 35 min. 70 min.
TPSRA5M74B00-B0 5.742 35 min. 70 min.
TPSRA6M00B00-B0 6.000 35 min. 70 min.
TPSRA6M50B00-B0 6.500 35 min. 70 min.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
TPSRA4M50B00-B0
Rg=50ohm
S.S.G.
220ohm
8.2µH
50ohm
2.2Kohm
R.F.
Voltmeter
TPSRA4M50C00-B0
R.F.
Voltmeter
1kohm
50ohm
15µH
Rg=50ohm
S.S.G.
330ohm
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
71
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
TPSRA5M50/5M74/6M00/6M50B00-B0
Rg=50ohm
S.S.G.
220ohm
15µH
50ohm
1Kohm
R.F.
Voltmeter
■ Frequency Characteristics
TPSRA4M50B00-B0
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0
TPSRA4M50C00-B0
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0
TPSRA5M50B00-B0
5.0 5.2 5.35.1 5.4 5.5 5.6 5.7 5.95.8 6.0
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
TPSRA5M74B00-B0
5.2 5.4 5.55.3 5.6 5.7 5.8 5.9 6.16.0 6.2
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
TPSRA6M00B00-B0
5.5 5.7 5.85.6 5.9 6.0 6.1 6.2 6.46.3 6.5
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
TPSRA6M50B00-B0
6.0 6.2 6.36.1 6.4 6.5 6.6 6.7 6.96.8 7.0
50
60
70
40
30
20
10
0
Attenuation (dB)
Frequency (MHz)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
72
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
TPSRA4M50B00-B0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
TPSRA4M50C00-B0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
TPSRA5M50B00-B0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
TPSRA5M74B00-B0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
TPSRA6M00B00-B0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
TPSRA6M50B00-B0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
200
400
600
800
50
60
70
40
30
20
10
0
G.D.T.(nesc)
Attenuation (dB)
Frequency (MHz)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
73
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRD Series
Ceramic Trap TPSRD_J series are two-terminals type.
Which are recommended for the attenuation of sound IF
in B/W TV and the attenuation of chroma signal in
Video Camcorder.
■ Features
1. Small-size, lightweight
2. High performance, durability
3. Easy to design due to two-terminals type
10.0 max.
5.0±1.0 10.0 max.
0.5±0.1
1.38±0.2
0.3±0.1
5.0 max.
5.0±0.2
T
E I A J
C O D E
J
in mm
Part Number Nominal Center
Frequency (fn1)
(MHz)
Attenuation
(at fn1)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPSRD3M58J00-B0 3.580 20 min. 20 min.[20dB Att.BW]
TPSRD4M43J00-B0 4.430 20 min. 40 min.[20dB Att.BW]
TPSRD4M50J00-B0 4.500 20 min. 30 min.[20dB Att.BW]
TPSRD5M50J00-B0 5.500 20 min. 30 min.[20dB Att.BW]
TPSRD6M00J00-B0 6.000 20 min. 40 min.[20dB Att.BW]
TPSRD6M50J00-B0 6.500 20 min. 40 min.[20dB Att.BW]
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
R.F.
Voltmeter
1KΩ
75Ω
Rg=50Ω
S.S.G.
50Ω
Ceramic
Trap
■ Frequency Characteristics
TPSRD3M58J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
3.1 3.4 3.5 3.7 3.93.2 3.3 3.6 3.8 4.0 4.1
TPSRD4M43J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
3.9 4.2 4.3 4.5 4.74.0 4.1 4.4 4.6 4.8 4.9
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
74
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TPSRD4M50J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
4.0 4.3 4.4 4.6 4.84.1 4.2 4.5 4.7 4.9 5.0
TPSRD5M50J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.0 5.3 5.4 5.6 5.85.1 5.2 5.5 5.7 5.9 6.0
TPSRD6M00J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.5 5.8 5.9 6.1 6.35.6 5.7 6.0 6.2 6.4 6.5
TPSRD6M50J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
6.0 6.3 6.4 6.6 6.86.1 6.2 6.5 6.7 6.9 7.0
■ Frequency Characteristics (Spurious)
TPSRD3M58J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPSRD4M43J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPSRD4M50J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPSRD5M50J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
75
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
TPSRD6M00J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPSRD6M50J00-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
76
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRD Series
Ceramic trap TPSRD_W series has same structure as
TPSRD_B series. But they can trap two individual
frequencies at one time. Recommended for two channel
multi-sound TV systems.
■ Features
1. Space saving
2. Three-terminals type
T
1.38±0.2
7.0±2.0
7.0±2.0
5.0±1.0
0.5±0.1
3.0±1.0
1.7±0.1
0.3±0.1
2.5 ±0.2±0.2 2.5
(3) (2) (1)
E I A J
C O D E
(in mm)
(1) : Input
(2) : Ground
(3) : Output
Part Number Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPSRD5M50W00-B0 5.500 5.742 32 min. 25 min. 70 min.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
R.F.
Voltmeter
1kohm
50ohm
15µH
Rg=50ohm
S.S.G.
330ohm
■ Frequency Characteristics
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.0 5.3 5.4 5.6 5.85.1 5.2 5.5 5.7 5.9 6.0
■ Frequency Characteristics (Spurious)
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
77
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 3.5-6.5MHz Double Traps TPWRD Series
Ceramic trap TPWRD_B series consist of two wafers with
two trap frequencies. Recommended for Dual standard
sets.
■ Features
1. Good performance of attenuation
2. Small and thin package
3. Three-terminals type
1.38±0.2
7.0±2.0
7.0±2.0
5.0±1.0
1.7±0.1
2.5
±
0.2
2.5
±
0.2
T W
3.5
±
1.0
0.3±0.1
0.5±0.1
B
E I A J
C O D E
(in mm)
(3) (2) (1)
(1) : Input
(2) : Ground
(3) : Output
Part Number Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPWRD5M50B02-B0 5.500 6.500 30 min. 30 min. 50 min.
TPWRD5M50B03-B0 5.500 6.000 30 min. 30 min. 50 min.
TPWRD5M50B04-B0 5.500 5.742 30 min. 30 min. 50 min.
TPWRD6M00B01-B0 6.000 6.500 30 min. 30 min. 70 min.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
Rg=50ohm
S.S.G.
150ohm
8.2µH
50ohm
330ohm
R.F.
Voltmeter
■ Frequency Characteristics
TPWRD5M50B02-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.0 5.6 5.8 6.2 6.65.2 5.4 6.0 6.4 6.8 7.0
TPWRD5M50B03-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
4.5 5.1 5.3 5.7 6.14.7 4.9 5.5 5.9 6.3 6.5
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
78
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TPWRD5M50B04-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
4.5 5.1 5.3 5.7 6.14.7 4.9 5.5 5.9 6.3 6.5
TPWRD6M00B01-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
5.0 5.6 5.8 6.2 6.65.2 5.4 6.0 6.4 6.8 7.0
■ Frequency Characteristics (Spurious)
TPWRD5M50B02-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPWRD5M50B03-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPWRD5M50B04-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
TPWRD6M00B01-B0
0
10
20
30
40
50
60
70
Frequency (MHz)
Attenuation (dB)
0.0 3.0 4.0 6.0 8.01.0 2.0 5.0 7.0 9.0 10.0
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
79
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Trap 3.5-6.5MHz Triple Traps TPTRD Series
Ceramic trap TPTRD_B series consist of 3 wafers with
3 trap frequencies. Recommended for Multi standard sets.
■ Features
1. Good performance of attenuation
2. Space saving for Multi set
3. Three-terminals type
1.38±0.2
7.0±2.0
8.0±2.0
5.0±1.0
1.7±0.1
2.5±0.2
2.5±0.2
T T
5.0 max.
0.3±0.1
0.5±0.1
B
E I A J
C O D E
(in mm)
(1) : Input
(2) : Ground
(3) : Output
(1)(2)(3)
Part Number Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Nominal Center
Frequency (fn3)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
Attenuation
(at fn3)
(dB)
30dB Attenuation
BW (fn1)
(kHz)
TPTRD5M50B01-B0 5.500 6.000 6.500 30 min. 30 min. 30 min. 50 min.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Test Circuit
Rg=50ohm
S.S.G.
150ohm
8.2µH
50ohm
330ohm
R.F.
Voltmeter
■ Frequency Characteristics
Frequency (MHz)
70
60
50
40
30
20
10
0
5.000 5.500 6.000 6.500 7.000
Attenuation (dB)
90
80
■ Frequency Characteristics (Spurious)
Frequency (MHz)
70
60
50
40
30
20
10
0
0.0 2.5 5.0 7.5 10.0
Attenuation (dB)
90
80
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
80
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
■ Features
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
4. Stable temperature characteristics
5. Recommended for Pb free soldering
4.1 max.
1.0 max.
4.5±0.1
0.2±0.2
2.0±0.1
0.3±0.2
0.4(ref.) 0.4(ref.)
1.4 max.
0.4±0.05
1.5±0.1
0.8±0.10.8±0.1
1.5±0.1 (in mm)
Part Number Center Frequency (fo)
(MHz) Recovered Audio 3dB BW
(kHz) Recovered Audio Output
(mV) Distortion
(%) IC Detection
Method
CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. TEA5757HL Quadrature
CDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. TA2154FN Quadrature
CDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. TRF6901 Quadrature
CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. LV23100V Quadrature
CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. TA31161 Quadrature
CDSCB10M7GF107-R0 10.700 (fn) fn±80 min. 52 min. 3.0 max. TA31272F Quadrature
CDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. TK14588V Quadrature
(fn) means nominal center frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
81
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Standard Land Pattern Dimensions
2.6
1.0 2.0 1.0
3.0
(in mm)
■ Test Circuit
CDSCB10M7GA105A-R0
48 41424344454647
13
12 20191817161514
4.7µ
X
150
S.S.G.
Vcc (3.0V)
0.1µ
0.47µ
TEA5757HL
(PHILIPS)
+
40
21
39
22
38
23
37
24
X : CDSCB10M7GA105A-R0
0.1µ
0.1µ10µ
100µ
10
100k
+
+
AFC (n)
AFC (p)
AF OUT
DC OUT
330p
0.22µ
11
10
9
8
7
6
5
4
3
2
1
25
26
27
28
29
30
31
32
33
34
35
36
0.1µ
Unit C
R: F
: Ω
CDSCB10M7GA113-R0
30 23242526272829
1 8765432
2.2µ
D.C. OUT
S.S.G.
Vcc (1.2V)
AF OUT
0.01µ
0.01µ
0.01µ
0.01µ
680p
TA2154FN (TOSHIBA)
+
22
9
21
10
20
11
19
12
18
13
17
14
16
15
X : CDSCB10M7GA113-R0
0.01µ
X
Unit C
R: F
: Ω
CDSCB10M7GA119-R0
0.01µ
0.01µ
0.01µ
0.01µ
0.01µ0.47µ
2.2µ0.1µ
0.1µ
0.22µ
4.7µ
120p
220k
68p
15p 82p
47p
1000p
100p
100p
10k
10k
1k
+
10
IF Input AF Output
Vcc (3.0V)
(TEXAS INSTRUMENTS)
TRF6901
PIC16F84
X
Unit C
R
L
: F
: Ω
: H
+
X : CDSCB10M7GA119-R0
1
2
3
4
5
6
7
8
9
10
11
12
36
35
34
33
32
31
30
29
28
27
26
25
13 14 15 16 17 18 19 20 21 22 23 24
48 47 46 45 44 43 42 41 40 39 38 37
18 17 16 15 14 13 12 11 10
1 2 3 4 5 6 7 8 9
CDSCB10M7GA121-R0
0.47µ
0.01µ
AF Output D.C. Output
LV23100V (SANYO)
PIC16F84 (Control IC)
10k
10k
10k
Vcc (3.2V)
1µ
0.047µ
0.047µ
2.2µ0.1µ
1k
0.047µ10k75
0.015µ0.01µ
100µ
10p
100p
10p
22µ
10µ
3.3k
+
1µ
+
+
+
+
+
+
S.G.
X
Unit C
R: F
: Ω
X : CDSCB10M7GA121-R0
36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19
1 2 3 4 5 6 7 98 10 11 12 13 14 15 16 17 18
18
1
17
2
16
3
15
4
14
5
13
6
12
7
10
9
11
8
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
82
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
CDSCB10M7GF072-R0
16
Vcc (3V)
9101112131415
1 8765432
IF IN
AF OUT
0.01µ
33µ0.01µ
R
10p
4.7µ
X
0.01µ
0.01µ
0.01µ
+
TA31161 (TOSHIBA)
X : CDSCB10M7GF072-R0
R : 820 Unit C
R
L
: F
: Ω
: H
CDSCB10M7GF107-R0
4 5 6 7 8 9321
21 20
19 18 17 16 15 14 13
10 11 12
222324
TA31272FN (TOSHIBA)
S.S.G.
X : CDSCB10M7GF107-R0
R : 1.2k
C : open
X R C
0.01µ0.1µ
0.01µ
AF OUTVcc (5.0V)
0.1µ
0.01µ
1000p
0.01µ
0.01µ
Unit C
R: F
: Ω
CDSCB10M7GF109-R0
0.01µ
0.01µ
Vcc (3V)
12k 51k
1000p
8p
+
S.S.G.
R
D.C. OUT AF OUT
X
0.01µ
0.01µ
0.01µ
0.01µ
4.7µ
51
0.01µ
1.2µ
TK14588V (TOKO)
Unit C
R
L
: F
: Ω
: H
X : CDSCB10M7GF109-R0
R : 820
910111213141516
87654321
■ Frequency Characteristics
CDSCB10M7GA105A-R0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100 dBµ
= ±75kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA113-R0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100 dBµ
= ±75kHz
= 1kHz
= 1.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
83
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
CDSCB10M7GA119-R0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
input
fdev.
fmod.
Vcc
= 100 dBµ
= ±60kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA121-R0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100 dBµ
= ±75kHz
= 1kHz
= 3.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GF072-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
100 10
1000 100
10 1
1 0.1
10.3 10.5 10.7 10.9 11.1
Input =
fdev. =
fmod. =
Vcc =
100dBµ
±80kHz
1kHz
3.0V
CDSCB10M7GF107-R0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
10.510.4 10.6 10.7 10.8 10.9 11.0
1
10
100
1000
0.1
1
10
100
AF Output
Distortion
Input Level
Mod. Freq.
Freq.Dev.
100dBµ
1000Hz
±40kHz
Input signal conditions
CDSCB10M7GF109-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
1000
100
10
1
100
10
1
0.1
10.3 10.5 10.7 10.9 11.1
Input =
fdev. =
fmod. =
Vcc =
100dBµ
±64kHz
1kHz
3.0V
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
84
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Discriminator 10.7MHz Standard Lead Type CDALA Series
CDALA10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in wide
bandwidths.
■ Features
1. Compact and excellent mechanical strength
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be obtained
without adjustment.
4. Stable temperature characteristics
5. We recommend combination: ceramic discriminator
CDALA10M7 series and "CERAFIL" SFELA10M7 of the
same frequency rank.
Freq. Rank (Color Dot)
5.0±1.0
8.0±1.0
5.0±1.0
0.4±0.1
3.0±1.0
0.5±0.1
0.3±0.1
0.65±0.1
(in mm)
5.0±0.2
M A R K I N G
E I A J
C O D E
CDALA10M7G_ Series
Freq. Rank (Color Dot)
5.0±1.0
8.0±1.0
5.0±1.0
0.4±0.1
3.0±1.0
0.5±0.1
0.3±0.1
0.65±0.1
(in mm)
5.0±0.2
M A R K I N G
E I A J
C O D E
CDALA10M7C_ Series
Part Number Center Frequency (fo)
(MHz) Recovered Audio 3dB BW
(kHz) Recovered Audio Output
(mV) Distortion
(%) IC Detection
Method
CDALA10M7GA001-B0 10.700 ±30kHz - - 0.6 max. CX20029 Quadrature
CDALA10M7GA016-B0 10.700 ±30kHz 300 min. within60 to 90mV 0.9 max. TA8122F Quadrature
CDALA10M7GA018-B0 10.700 ±30kHz 300 min. within60 to 90mV 0.9 max. TA8132N Quadrature
CDALA10M7GA046-B0 10.700 ±30kHz 330 min. 280 min. 1.0 max. LA1832 Quadrature
CDALA10M7GA048-B0 10.700 ±30kHz 400 min. 700 min. 1.0 max. LA1835 Quadrature
CDALA10M7GA092-B0 10.700 ±30kHz 300 min. 60 min. 1.0 max. TA2132P Quadrature
CDALA10M7CA001-B0 10.700 ±30kHz 242 min. 35 min. 1.0 max. CX20091 Quadrature
CDALA10M7CA005A-B0 10.700 ±30kHz 100 min. 600 min. 6.0 max. LA7770 Quadrature
CDALA10M7CA040-B0 10.700 ±30kHz 130 min. 40 min. 0.7 max. TEA5710 Quadrature
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
CDALA10M7GA018-B0: Color dot is different from standard series.
■ Standard Center Frequency Rank Code
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A,B,C,D,E
Combination A,B,C
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
85
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
CDALA10M7GA001-B0
100k
Fg=50
CDALA10M7GA001
1µ
0.01µ
280
AFC
CX20029
Vcc=+3.0V
Unit
R : Ω
C : F
S.S.G.
REF
AF OUTPUT
+ –
5 33
289
39 32
CDALA10M7GA016-B0
2.5µ
0.1µ
0.033µ
0.022µ
0.022µ
22µ
270
24k
330p
1k
VCC +3V DC Out AF Out
CDACV10M7GA016
SFELA10M7DF00
IF in
TA8122F (TOSHIBA)
+
+
123456789101112
24 23 22 21 20 19 18 17 16 15 14 13
Unit
R : Ω
C : F
CDALA10M7GA018-B0
24 23 22 21 20 19 18 17 16 15 14 13
1 2 3 4 5 6 7 8 9 10 11 12
TA8132N (TOSHIBA)
1F in Vcc 3V DC out AF out
SFELA10M7DF00
CDALA10M7GA018
0.022µ
0.1µ
24k
1k
270
2.2µ
0.033µ
22µ
0.022µ
330p
Vcc 3V
Unit
R : Ω
C : F
+
+
CDALA10M7GA046-B0
24 1314151617181920212223
1 12111098765432
LA1832 (SANYO)
AFC
IF-IN
300
0.047µ
0.047µ
100µ
75 10µ
2.2µ
270
REG
CDALA10M7GA046
3k
1µ
Vcc (5V)
AF OUT
+Unit
R : Ω
C : F
1µ
0.01µ
0.01µ
CSBLA456KE2ZF15
+
1200p
0.047µ5.6k
6.8k
+
3.3µ
22µ
1µ
++
+
CDALA10M7GA048-B0
3.3µ
LA1835 (SANYO)
VCC(7V)
Vt
AFC
47n +
+
15k
300
47n
75
IF-IN
0.047µ
0.047µ
10µ
10µ
10µ0.47µ
1µ
10µ
10µ
1µ
CSBLA456KE2ZF15 33n
1500p 33n
REG.
1k 1k 3k
Lch
Rch
20k
510
CDALA10M7GA048
5k
L. P. F.
L. P. F.
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
++
+
++ +
Unit
R : Ω
C : F
CDALA10M7GA092-B0
TA2132P(TOSHIBA)
+
DC OUT
AF OUT
Vcc(3.0V)
IF-IN
4.7µ
+
4.7µ
0.033µ
20k
270 0.01µ330p
CDALA10M7GA092
+
2.2µ
16
1
15
2
14
3
13
4
12
5
11
6
10
7
9
8
Unit
R : Ω
C : F
CDALA10M7CA001-B0
100µ
10µ
33µ
10µ
10µ
CDALA10M7CA001
0.1µ
0.01µ
0.01µIF in
1k
100
CX20090 (SONY)
VCC 5V AF Output AFC
Ref.
4.7µ
28 27 26 25 24 23 22 21 20 19 18 17 16 15
1 2 3 4 5 6 7 8 9 10 11 12 13 14
+
+
+
+
+
+
Unit
R : Ω
C : F
CDALA10M7CA005A-B0
20 19 18 17 16 15 14 13 12 11
12345678910
IC : LA7770 (SANYO)
DC Bias
+5V DC Bias
+5.2V
DATA OUT
0.01µ
470p
470p
0.1µ
0.01µ
0.01µ
0.01µ
0.01µ
33µ
0.022p
1000p
0.1µ
2k
5.6k
20k
10k
2k
5p
220p
10k
10k
Demod.OUT
CDALA10M7CA005A
+
-
Vcc=12V
IF IN
50
Unit
R : Ω
C : F
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
86
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
CDALA10M7CA040-B0
24 23 22 21 20 19 18 17 16 15 14 13
123456789101112
TEA5710 (PHILIPS)
100µ
0.01µ
0.22µ
10µ
100µ
0.01µ
0.01µ
1µ
0.22µ
VCC (3V)
AF-OUT
DC-OUT
S.S.G.
50
280
+ +
+
+
Unit
R : Ω
C : F
■ Frequency Characteristics
CDALA10M7GA001-B0
0.1
1
10
1
10
100
500
10.610.5 10.7 10.8 10.9 11.010.4 Frequency (MHz)
Input Level
Mod. Freq.
Freq.Dev.
110dBµ
400Hz
±22.5kHz
Input signal conditions
Recovered AF Output Voltage (mV)
Distortion (%)
Distortion
AF Output
CDALA10M7GA016-B0
0.1
1
10
1
10
100
500
10.610.5 10.7 10.8 10.9 11.010.4 Frequency (MHz)
80dBµ
1000Hz
±22.5kHz
Recovered AF Output Voltage (mV)
Distortion (%)
Distortion
AF Output
Input Level
Mod. Freq.
Freq.Dev.
Input signal conditions
CDALA10M7GA018-B0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
1
10
100
1000
0.1
1
10
100
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Input Level 80 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±22.5 kHz
Distortion
AF Output
Input signal conditions
CDALA10M7GA046-B0
Distortion (%)
Frequency (MHz)
1
10
100
1000
10.510.4 10.6 10.7 10.8 10.9 11.0
0.1
1
10
100
Input Level 112 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±75 kHz
AF Output
Distortion
Input signal conditions
Recovered AF Output Voltage (mV)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
87
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
CDALA10M7GA048-B0
0.1
1
10
1
10
100
500
10.610.5 10.7 10.8 10.9 11.010.4 Frequency (MHz)
Recovered AF Output Voltage (mV)
Input Level
Mod. Freq.
Freq.Dev.
112dBµ
1000Hz
±75kHz
Input signal conditions
Distortion
AF Output
Distortion (%)
CDALA10M7GA092-B0
10
1
0.1
10
100
500
1
Frequency (MHz)
10.510.4 10.6 10.7 10.8 10.9 11.0
AF Output
Distortion
Distortion (%)
Input signal conditions
Recovered AF Output Voltage (mV)
Input Level 80dBµ
Mod.Freq. 1000Hz
Freq.Dev. ±22.5kHz
CDALA10M7CA001-B0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
1
10
100
1000
10.510.4 10.6 10.7 10.8 10.9 11.0
0.1
1
10
100
Input Level 110 dBµ
Mod. Freq. 400 Hz
Freq. Dev. ±22.5 kHz
AF Output
Distortion
Input signal conditions
CDALA10M7CA005A-B0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
10
100
1000
5000
10.6 10.7 10.8
1
10
100
500
Input Level 100 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±75 kHz
AF Output
Distortion
Input signal conditions
CDALA10M7CA040-B0
Recovered AF Output Voltage (mV)
Distortion (%)
Frequency (MHz)
1
10
100
1000
10.5 10.6 10.7 10.8 10.9
0.1
1
10
100
10.4 11.0
Input Level 100 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±22.5 kHz
AF Output
Distortion
Input signal conditions
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Please see following table for reference applied IC.
If you can not find IC part number seeking, please contact our sales representative.
ex. : CDALA10M7GA016-B0
Suffix Number
CDSCB10M7GA105A-R0
Suffix Number
IC Manufacturer IC Part Number Suffix Number
SAMSUNG
SANYO
SONY
T. I.
KA22425
KA2244
KA22901
KA2292
KA2295
KA2297
KA2298B
KB22902
S1A0903
LA1150
LA1225M
LA1260
LA1805
LA1810
LA1814M
LA1816
LA1822
LA1823
LA1827M
LA1830
LA1831
LA1832 / M
LA1833
LA1835 / M
LA1838 / M
LA7770
LV23000M
LV23100V
CX1691M
CX-20029
CX-20076
CXA1030P
CXA1111
CXA1238
CXA1238N
CX1343M
CXA1376AM
CXA1538M / N / S
CXA1611
CXA1619B
CXA1991N
CX3067M
TRF6901
089
059
090
063
064
091
065
103
118A
070
108A
007
026
022
115
015
094
101
083
037
043
046
086
048
079
023
114
121
078
001
002
012
093
027
027N
032
054
069
075
117
068
076
119
IC Manufacturer IC Part Number Suffix Number
ATMEL
INFINEON
MATSUSHITA
MOTOROLA
NEC
PHILIPS
RFMD
ROHM
U2501B
U2765B
U4313B
U4490B
U829B
TDA1576T
TDA6160X
TDA6160-2X
AN6138SH
AN7004
AN7006S
AN7007SU
AN7232
MC13156
MC13158
MC13173
MC3363
µPC1391M
NE604
SA605
SA626
SA636DK
SA639
TBA120U
TBA229-2
TDA1596T
TDA2557
TEA5591
TEA5592
TEA5594
TEA5710
TEA5712T
TEA5757HL
TEA5762 / 5757
UAA3220TS
RF2905
RF2925
BA1440
BA1448
BA4110
BA4220
BA4230AF
BA4234L
BA4240L
028
095
081
034V
025
051
038
044
097
011
014A
013
053
049
073
052
087
056
020
042
047
096
085
029
021A
120
024
017
030
035
040
055
105A
061
098
111
104
019
060
066
041
005
004
067
Continued on the following page.
Ceramic Discriminator 10.7MHz Applied IC Reference Table
88
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
IC Manufacturer IC Part Number Suffix Number
TOKO
TOSHIBA
TK14570L
TK14581
TK14583V
TK14588V
TA2003
TA2007
TA2008A / AN
TA2022
TA2029
TA2046
TA2057
TA2099N
TA2104AFN
TA2104F
TA2111N / F / FN
TA2132
TA2132BP
TA2142FN
TA2149AN
TA2149N
TA2154FN
TA2159F
TA31161
TA31272F
TA7130P
TA7303P
TA7640AP
TA7765AF
TA8122AN / AF
TA8132AN / AF
TA8186
TA8721ASN
122
062
112
109
031
033
045
050
036
058
057
082
080
080A
077
092
092D
102
100A
100
113
116
072
107
009
008
006
071
016
018
039
088
Continued from the preceding page.
Ceramic Discriminator 10.7MHz Applied IC Reference Table
89
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Ceramic Discriminator 10.7MHz Applied Circuit
90
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ LA1140 (Automotive Radio)
16
4 105 146
1
2
3
12 9 11 13
8
7AFC
LA1140
(SANYO)
SFELA10M7HAA0-B0
SFELA10M7HAA0-B0
C.F.
AGC
C.F.
0.047 x 2
Vref.
+
+C9 0.047
C10 4.7µ
R13
12k
R14
L2
C11
33p
C8
0.047
C7
0.047
L1 2.2µH
R7 200
R8
330
R3R2
R6
330
R9
220k
R2
47k
R12
C14
0.047
C3
0.047
C2
0.022
C1
0.022
R1
100
R2
1k
R4
10k
C13
33p
22k
R10
C15
0.047
C6
C5C4
VR1
150k
1.8k1.8k 15
2.2µ
FRONT
END
+
■ CXA1019M (Radio)
R
FM PF FM OSC
W
W
W
W
W
W
W
W
1917678 14 225 26 13
8
28
27
3244212322
1
RIPPLE
FILTER
REGULATOR
TUNING
METER
VOL
CXA1019M(SONY)
FM IF
AMP
DETECTOR
AF
PRE
/
POWER
AMP
AM IF
AMP
DETECTOR
FM
FRONT
END
AM
FRONT
END
FM
BPF
METER
AM IF
IN
Vcc
SP
AF IN
VOL
AM OSC
AM ANT
DEP
OUT
FM/AM
BAND SELECT
REG
OUT
FM DISCRI
FM IF
IN
FM CERAFIL®
(SFELA10M7FA00-B0) CERAMIC DISCRIMINATOR
(CDALA10M7CA001-B0)
IF
OUT
AM CERAFIL®
(SFULA455KU2B-B0)
10
13
12
20 161811 5
No adjustment is needed the FM detection stage due to use the ceramic discriminator.
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Ceramic Discriminator 10.7MHz Applied Circuit
91
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ TA8122F (Radio)
L3
20p
22p
330p
8p
33k
22k
100k
5p
IS2236
CSBLA456KE2ZF16-B0
CDALA
10M7GA16-B0
SFELA10M7FA00-B0SFULA455KU2B-B0
TA8122F(TOSHIBA)
100k
L1T1L2
15p
LPF1
MO AM
FM
ST
LPF2 VCO
L
W
W
W
W
W
FM
PF
AM
PF FM
OSC AM
OSC DEF
OUT MPX
IN OUT
LOUT
R
QUAD
ST
LED
W
TUN
LED
FM
IF IN
AM
IF IN
AM
AGC
FM
RF IN AM
MIX
FM
MIX GND2
Vcc2GND1
T2
OUT
IN Vcc1
10µF
0.022µF
0.1µ
4.7µ
4.7µ
0.068µ
0.015µ
0.033µ
33µ
10µH
0.015µ
0.1µ
22µ
0.022µ
560
560
24 23 22 20 19 18 17 16 15 14 13
654321 7 8 9 10 11 12
21
R
Vcc
W(3V)
ST
DECODER
Phase
COM
Phase
COM
VCO
Freq
Divider HYX SW
ST
LED
TUN
LED
L
DET
FM
DET
FM
IF
AF PRE
FM
DET
AM
AGC
AM
MIX
AM
MIX
FM
OSC AM
OSC
AM/FM
MONO SW
AM
IF
FM
RF
AM
RF
BPF
Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK®)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
92
32
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRH Series
Ceramic discriminator CDSRH series is a wide band, low
profile type using thickness shear mode vibration.
■ Features
1. Low profile 8.0mm type
2. Suitable for Multi-sound Broadcasting system
3. Two-terminals type and three-terminals type are
available.
10.0 max.
8.0 max.
4.0max.
0.5±0.1
5.0±1.0
1.38±0.2
0.3±0.1
M A R K I N G E I A J
C O D E
(in mm)
5.0±0.2
CDSRH_EK Series
10.0 max.
8.0 max.
4.0 max.
(3) (2) (1)
1.38±0.2
5.0±1.0
0.5±0.1
1.7±0.1
0.3±0.1
2.5±0.2
2.5±0.2
M A R K I N G
EIAJ
CODE
(in mm)
(1) : Input
(2) : Ground
(3) : Output
CDSRH_CK Series
Part Number Nominal Center
Frequency (fn)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered Audio
Output Voltage (at fn)
(mV)
Distortion
(%) IC Detection Method
CDSRH4M50EK020-B0 4.500 fn±80 min. 245 min. 1.0 max. LA7550/7555 Quadrature
CDSRH4M50EK023-B0 4.500 fn±60 min. 230 min. 2.5 max. M51496P Quadrature
CDSRH4M50EK035-B0 4.500 fn±55 min. 240 min. 1.0 max. LA7680/7681 Quadrature
CDSRH4M50EK049-B0 4.500 fn±100 min. 220 min. 1.0 max. LA7577 Quadrature
CDSRH4M50EK060-B0 4.500 fn±90 min. 90 min. 1.0 max. M52318SP Quadrature
CDSRH4M50EK069-B0 4.500 fn±60 min. 320 min. 1.5 max. TA8701N Quadrature
CDSRH4M50EK070-B0 4.500 fn±50 min. 65 min. 1.5 max. M52007FP Quadrature
CDSRH5M50EK023-B0 5.500 fn±45 min. 220 min. 1.0 max. M51496P Quadrature
CDSRH5M50EK035-B0 5.500 fn±80 min. 350 min. 1.0 max. LA7680/7681 Quadrature
CDSRH5M50EK049-B0 5.500 fn±60 min. 500 min. 1.0 max. LA7577 Quadrature
CDSRH5M50EK054-B0 5.500 fn±100 min. 300 min. 1.2 max. TDA3857 Quadrature
CDSRH5M50EK060-B0 5.500 fn±70 min. 190 min. 1.5 max. M52318SP Quadrature
CDSRH5M74EK054-B0 5.742 fn±90 min. 340 min. 1.2 max. TDA3857 Quadrature
CDSRH6M00EK049-B0 6.000 fn±60 min. 500 min. 1.0 max. LA7577 Quadrature
CDSRH6M00EK054-B0 6.000 fn±90 min. 340 min. 1.5 max. TDA3857 Quadrature
CDSRH6M00EK060-B0 6.000 fn±60 min. 180 min. 2.5 max. M52318SP Quadrature
CDSRH6M50EK020-B0 6.500 fn±110 min. 350 min. 1.2 max. LA7550/7555 Quadrature
CDSRH6M50EK049-B0 6.500 fn±60 min. 500 min. 1.0 max. LA7577 Quadrature
CDSRH6M50EK054-B0 6.500 fn±90 min. 340 min. 1.5 max. TDA3857 Quadrature
CDSRH6M50EK060-B0 6.500 fn±60 min. 160 min. 2.5 max. M52318SP Quadrature
CDSRH4M50CK020-B0 4.500 fn±50 min. 280 min. 2.0 max. µPC1382C Quadrature
CDSRH4M50CK026-B0 4.500 fn±40 min. 70 min. 1.2 max. LA7530 Quadrature
CDSRH4M50CK029-B0 4.500 fn±65 min. 250 min. 1.2 max. M51365SP Quadrature
CDSRH4M50CK030-B0 4.500 fn±40 min. within130 +30/-20mV 3.0 max. M51348FP Quadrature
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
93
32
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Nominal Center
Frequency (fn)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered Audio
Output Voltage (at fn)
(mV)
Distortion
(%) IC Detection Method
Continued from the preceding page.
CDSRH5M50CK026-B0 5.500 fn±50 min. 500 min. 3.0 max. LA7530 Quadrature
CDSRH5M50CK029-B0 5.500 fn±70 min. 420 min. 1.5 max. M51365SP Quadrature
CDSRH5M50CK030-B0 5.500 fn±55 min. 150 min. 3.0 max. M51348FP Quadrature
CDSRH6M00CK026-B0 6.000 fn±50 min. 400 min. 3.0 max. LA7530 Quadrature
CDSRH6M00CK029-B0 6.000 fn±70 min. 450 min. 1.7 max. M51365SP Quadrature
CDSRH6M00CK030-B0 6.000 fn±55 min. 150 min. 3.0 max. M51348FP Quadrature
CDSRH6M50CK020-B0 6.500 fn±60 min. 480 min. 2.0 max. µPC1382C Quadrature
CDSRH6M50CK026-B0 6.500 fn±35 min. 400 min. 3.0 max. LA7530 Quadrature
CDSRH6M50CK029-B0 6.500 fn±70 min. 430 min. 2.0 max. M51365SP Quadrature
Characteristics shown above is as of 100% Dev.
Part Numbers are varied with applied IC.
Please note circuits and specifications are also varied with IC.
■ Test Circuit
CDSRH4M50EK049-B0
IF-in
AF-out
15n
5.6k
10n
10k
18µ
10n
680
LA7577 (SANYO)
1211108765432
24 1314151617181920212223
1
10n
100µ
Vcc (12V)
9
CDSRH4M50CK029-B0
M51365SP
(MITSUBISHI)
14
13
(1)
0.01µ4.7µ
10µ
+
+
Ground
IN
Ground
DC Out
AF Out
Vcc=12V
(3)
(2)
18 17
19
107 12
12p
680
50
0.01µ
0.01µ
0.01µ
680
3.3k
Unit C
R : F
: Ω
■ Frequency Characteristics
CDSRH4M50EK049-B0
300
100
10
1
10
1
0.1
4.3 4.5 4.7
Frequency (MHz)
Recovered AF Output Voltage (mV)
Distoriton (%)
Distoriton
AF Output
CDSRH4M50CK029-B0
Distoriton (%)
300
100
10
1
10
1
0.1
4.3 4.5 4.7
Frequency (MHz)
Recovered AF Output Voltage (mV)
AF Output
Distoriton
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
94
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment
Ceramic Discriminator 3.5-6.5MHz Low Profile Type CDSRL Series
Ceramic discriminator CDSRL series is a wide band, low
profile type using thickness shear mode vibration.
■ Features
1. Low profile 6.0mm type
2. Suitable for Multi-sound Broadcasting system
3. Two-terminals type and three-terminals type are
available.
10.0 max.
6.0 max.4.0max.
0.5±0.1
5.0±1.0
1.0±0.2
0.3±0.1
M A R K I N G E I A J
C O D E
(in mm)
5.0±0.2
CDSRL_EK Series
10.0 max.
6.0 max.
4.0 max.
(3) (2) (1)
1.1±0.1
5.0±1.0
0.5±0.1
1.7±0.1
0.3±0.1
2.5±0.22.5±0.2
M A R K I N G
E I A J
C O D E
(in mm)
(1) : Input
(2) : Ground
(3) : Output
CDSRL_CK Series
Part Number Nominal Center
Frequency (fn)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered Audio
Output Voltage (at fn)
(mV)
Distortion
(%) IC Detection Method
CDSRL4M50EK020-B0 4.500 fn±80 min. 245 min. 1.0 max. LA7550/7555 Quadrature
CDSRL5M50EK020-B0 5.500 fn±100 min. 330 min. 1.2 max. LA7550/7555 Quadrature
CDSRL4M50CK020-B0 4.500 fn±50 min. 280 min. 2.0 max. µPC1382C Quadrature
CDSRL4M50CK029-B0 4.500 fn±65 min. 250 min. 1.2 max. M51365SP Quadrature
CDSRL4M50CK030-B0 4.500 fn±40 min. within130 +30/-20mV 3.0 max. M51348FP Quadrature
CDSRL5M50CK030-B0 5.500 fn±55 min. 150 min. 3.0 max. M51348FP Quadrature
CDSRL6M00CK029-B0 6.000 fn±70 min. 450 min. 1.7 max. M51365SP Quadrature
CDSRL6M00CK030-B0 6.000 fn±55 min. 150 min. 3.0 max. M51348FP Quadrature
CDSRL6M50CK020-B0 6.500 fn±60 min. 480 min. 2.0 max. µPC1382C Quadrature
CDSRL6M50CK026-B0 6.500 fn±35 min. 400 min. 3.0 max. LA7530 Quadrature
Characteristics shown above is as of 100% Dev.
Part Numbers are varied with applied IC.
Please note circuits and specifications are also varied with IC.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
95
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
CDSRL4M50EK020-B0
LA7550 (SANYO)
1 2 6 7 8 9 11 12
24
SIF IN
Vcc 9V
DC5V Chang
0.01µ0.01µ
100µ
22µ
0.01µ
0.01µ
0.01µ
0.01µ
0.01µ
0.01µ
0.015µ
1.2k
5.6k
+ -
AF OUT
20 1519 18 17 14 13
CDSRL4M50CK029-B0
M51365SP
(MITSUBISHI)
14
13
(1)
0.01µ4.7µ
10µ
+
+
Ground
IN
Ground
DC Out
AF Out
Vcc=12V
(3)
(2)
18 17
19
107 12
12p
680
50
0.01µ
0.01µ
0.01µ
680
3.3k
Unit C
R : F
: Ω
■ Frequency Characteristics
CDSRL4M50EK020-B0
500
100
10
1
10
1
0.1
4.3 4.5 4.7
300
Frequency (MHz)
Recovered AF Output Voltage (mV)
Distoriton (%)
AF Output
Distoriton
CDSRL4M50CK029-B0
300
100
10
1
10
1
0.1
4.3 4.5 4.7
Distoriton
Frequency (MHz)
AF Output
Recovered AF Output Voltage (mV)
Distoriton (%)
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Soldering and Mounting)
96
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CERAFILr 10.7MHz Chip Type SFECS/SFECD Series
1. Standard Reflow Soldering Condition
(1) Reflow
The component cannot withstand washing.
2. Wash
Filter shall be soldered at +280±5˚C for 3.0±0.5 seconds.
The soldering iron shall not touch the filter while soldering.
(2) Soldering Iron
Temperature (˚C)
100
200
240
30 sec.
min. 30 sec.
max.
Peak
(240˚C max.)
Pre-heating
(120-170˚C)
Heating
(200˚C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
■ CERAFILr 10.7MHz Chip Type SFECV Series
1. Standard Reflow Soldering Condition
(1) Reflow
The component cannot withstand washing.
2. Wash
Lead terminal is directly contacted with the tip of
soldering iron at +280±5˚C for 3.0±0.5 seconds.
(2) Soldering Iron
60 30 Time(sec.)
5sec.
150
230
240
Temperaturu(°C)
Gradual Cooling
■ CERAFILr 10.7MHz Lead Type
The component cannot withstand washing.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Soldering and Mounting)
97
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CERAFILr 4.5-6.5MHz Chip Type
1. Standard Reflow Soldering Condition
(1) Reflow
The component cannot withstand washing.
2. Wash
Lead terminal is directly contacted with the tip of
soldering iron at +280±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
60 30
5 sec.
240
230
150
Temperature (°C)
Gradual Cooling
Time (sec.)
■ CERAFILr 3.5-6.5MHz Lead Type
The component cannot withstand washing.
■ CERAFILr 455kHz Chip Type PFWCC Series
1. Standard Reflow Soldering Condition
(1) Reflow
The component cannot withstand washing.
2. Wash
Lead terminal is directly contacted with the tip of
soldering iron at +280±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Gradual Cooling
5
sec.
150
230
240
30
60
Time (sec.)
Temperature (°C)
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Soldering and Mounting)
98
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 455kHz Chip Type SFPCA Series
1. Standard Reflow Soldering Condition
(1) Reflow
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
Water (Demineralized Water), Cleaning Water Solution
(Cleanthrough-750H, Pine Alpha 100S), Silicon
(Technocare FRW)
2. Wash
(1) Cleaning Solvent
Immersion Wash
2 minutes max. in above solvent at +60°C max.
Shower or Rinse Wash
2 minutes max. in above solvent at +60°C max.
(2) Cleaning Conditions
When components are immersed in solvent, be sure to
maintain the temperature of components below the
temperature of solvent.
Please do not use ultrasonic cleaning.
Total washing time should be within 4 minutes.
Please ensure the component is thoroughly evaluated
in your application circuit.
Please do not use chlorine, petroleum and alkali
cleaning solvents.
If you plan to use any other type of solvents, please
consult with Murata or Murata representative prior to
using.
(3) Notice
Electrode is soldered directly with the tip of soldering iron
at +350±5°C for 3±1 seconds.
(2) Soldering Iron
Peak
(235 °C max.)
Heating
(200 °C)
Gradual
Cooling
Pre-heating
(140-160 °C)
100
200
240
Temperature (°C)
30sec. min. 60sec.-120sec. 50sec. max. 120sec. min.
■ CERAFILr 455kHz Lead Type
The component cannot withstand washing.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Soldering and Mounting)
99
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Ceramic Trap 4.5-6.5MHz Chip Type
1. Standard Reflow Soldering Condition
(1) Reflow
The component cannot withstand washing.
2. Wash
Lead terminal is directly contacted with the tip of
soldering iron at +280±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
60 30
5 sec.
240
230
150
Temperature (°C)
Gradual
Cooling
Time (sec.)
■ Ceramic Trap 3.5-6.5MHz Lead Type
The component cannot withstand washing.
■ Ceramic Discriminator 10.7MHz Chip Type
1. Standard Reflow Soldering Condition
(1) Reflow
The component cannot withstand washing.
2. Wash
Lead terminal is directly contacted with the tip of
soldering iron at +280±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
5 sec
Gradual
Cooling
150
240
260
6060 Time (sec.)
Temperature (°C)
■ Ceramic Discriminator 10.7MHz Lead Type
The component cannot withstand washing.
■ Ceramic Discriminator 3.5-6.5MHz
The component cannot withstand washing.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
100
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CERAFILr 10.7MHz Chip Type SFECS/SFECD Series
1. The component will be damaged when an excessive
stress is applied.
2. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
3. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremly careful in determining shape and dimension
before designing the circuit board diagram.
5. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
6. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. The use
of solder containing Ag should be done to prevent the
electrode erosion.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated carefully.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of miscorrelation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
[Component layout close to board]
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
101
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 10.7MHz Chip Type SFECV Series
1. The component will be damaged when an excessive
stress is applied.
2. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
3. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to lower. To
prevent this, be extremely careful in determining shape
and dimension before designing the circuit board
diagram.
5. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
6. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. the use of
solder containing Ag should be done to prevent the
electrode erosion.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated carefully.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of mis-
correlation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
[Component direction]
[Component layout close to board]
Put the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
■ CERAFILr 10.7MHz Lead Type
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering discriminator with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
7. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miscorrelation if there is any deviation,
especially stray capacitance, from the test
circuit in the specification.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
102
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CERAFILr 4.5-6.5MHz Chip Type
1. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
2. Design layout of components on the PC board to
minimize the stress imposed on the wrap or flexure of the
board.
3. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
4. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
5. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component.
6. Cleaning or washing of the component is not acceptable
due to non sealed construction.
7. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated carefully.
8. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of
miscorrelation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
[Component direction]
[Component layout close to board]
Put the compon-
ent lateral to
the direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
■ CERAFILr 3.5-6.5MHz Lead Type
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Please contact Murata or Murata representative for
soldering condition, in case of using lead free
solder.
6. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
7. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
8. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miscorrelation if there is any
deviation, especially stray capacitance, from the
test circuit in the specification.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
103
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CERAFILr 455kHz Chip Type PFWCC Series
1. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
2. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
3. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to lower. To
prevent this, be extremly careful in determining shape
and dimension before designing the circuit board
diagram.
[Component direction]
[Component layout close to board]
Put the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
■ CERAFILr 455kHz Chip Type SFPCA Series
1. The component will be damaged when an excessive
stress is applied.
2. Use coupling capacitors to prevent applying D.C.
voltage between input-ground, output-ground of
"CERAFIL" as D.C. current may harm the component.
3. In the case that the component is cleaned, confirm
that no reliability degradation is created.
4. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in re-flow soldering.
6. The product, packed in the moisture-proof bag
(dry pack), is sensitive to moisture. The following
treatment is required before applying re-flow
soldering, to avoid package cracks or reliability
degradation caused by thermal stress. When unpacked,
store the component in an atmosphere of below 25
degree C and below 65% R.H., and solder within 48
hours.
■ CERAFILr 455kHz Lead Type
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component will be damaged when an excessive
stress is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
7. Accurate test circuit values are required to
measure electrical characteristics.
It may be a cause of miscorrelation if there is
any deviation, especially stray capacitance, from
the test circuit in the specification.
8. Use coupling capacitors to prevent applying D.C.
voltage between input-ground, output-ground of
"CERAFIL" as D.C. current may harm the component.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
104
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Ceramic Trap 4.5-6.5MHz Chip Type
1. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
2. Design layout of components on the PC board to
minimize the stress imposed on the wrap or flexure of the
board.
3. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
4. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
5. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component.
6. Cleaning or washing of the component is not acceptable
due to non sealed construction.
7. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated carefully.
8. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of
miscorrelation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
[Component direction]
[Component layout close to board]
Put the compon-
ent lateral to
the direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
■ Ceramic Trap 3.5-6.5MHz Lead Type
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Please contact Murata or Murata representative for
soldering condition, in case of using lead free
solder.
6. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
7. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
8. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miscorrelation if there is any
deviation, especially stray capacitance, from the
test circuit in the specification.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
105
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Ceramic Discriminator 10.7MHz Chip Type
1. The component mounted on the PCB may be damaged if
excess mechanical stress is applied.
2. Layout the components on the PCB to minimize the
stress imposed by the warp or flexure of the board.
3. After installing components, if solder is excessively
applied to the circuit board, mechanical stress will cause
destruction resistance characteristics to be lower. To
prevent this, be extremely careful in determining shape
and dimension before designing the circuit board diagram.
4. When the positioning claw or pick up nozzle are worn, the
excess load is applied to the components while
positioning or placing are performed. Careful checking
and maintenance are necessary to prevent unexpected
trouble.
5. When correcting component's position with a soldering
iron, the tip of the soldering iron should not directly touch
the chip component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. The use of solder containing Ag should be
considerd to prevent the electrode erosion.
6. Do not clean or wash the component as it is not
hermetically sealed.
7. In case of overcoating the part, coating conditions such
as material, curing temperature, and so on must be
evaluated deeply.
8. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of miscorrelation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
[Component direction]
[Component layout close to board]
Put the
component
laterally to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
■ Ceramic Discriminator 10.7MHz Lead Type
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering discriminator with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
7. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miscorrelation if there is any deviation,
especially stray capacitance, from the test
circuit in the specification.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Notice (Handling)
106
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Ceramic Discriminator 3.5-6.5MHz
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Please contact Murata or Murata representative for
soldering condition, in case of using lead free
solder.
6. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
7. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated carefully.
8. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miscorrelation if there is any
deviation, especially stray capacitance, from the
test circuit in the specification.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
107
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Minimum Quantity
SFECS
SFECD
SFECV
SFELA
SFELB
SFVLA
SFKLA
SFTLA
SFSKA
SFSRA
SFSRL
SFTRD
SFSRH
PFWCC
SFPCA
SFULA
SFZLA
PFSLA
PFWLA
SFPLA
CFWLA
CFULA
BFULA
TPSKA
TPWKA
TPSRA
TPSRD
TPWRD
TPTRD
CDSCB
CDALA
CDSRH
CDSRL
3,000
1,000
3,000
3,000
CERAFILr<10.7MHz>
CERAFILr<3.5-6.5MHz>
CERAFILr<455kHz>
Ceramic Traps<3.5-6.5MHz>
Ceramic Discriminators<10.7MHz>
Ceramic Discriminators<3.5-6.5MHz>
2,000
2,000
2,000
1,000
2,000
1,500
1,500
1,000
1,500
2,000
1,500
1,500
1,500
2,000
1,500
1,500
1,500
1,500
1,500
500
500
500
500
500
500
500
500
500
500
200
500
500
500
500
500
500
500
500
500
500
50
50
50
50
200
150
200
BoxMagazineBulkAmmo Pack
ø180mmø330mm
Taping
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
108
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 10.7MHz Chip Type
SFECS Series
Chip Filter
φ1.55T0.05
40T0.15
10 pitch accumulated
User direction of feed
Cover film
Peeling strength
0.1~0.7N
0.3T0.05
2.02T0.1
0.05
3˚max.
10˚ max.
(in mm)
5.5T0.05
4.3
4.0T0.1
2.0T0.05
4.0T0.1
3.45
3.35T0.1
12.0T0.2
· Part Number marked side is always facing up.
· The feeding holes side of cavity tape is always input terminal.
SFECD Series
Chip Filter
φ1.55T0.05
40T0.15
10 pitch accumulated
User direction of feed
Cover film
Peeling strength
0.1 to 0.7N
0.25T0.05
(1.25)
0.05
3˚max.
10˚ max.
(in mm)
5.5T0.05
(4.1)
4.0T0.1
2.0T0.05
4.0T0.1 (3.4)
3.35T0.1
12.0T0.2
· Part Number marked side is always facing up.
· The feeding holes side of cavity tape is always input terminal. ( ) : Reference
SFECV Series
1.7W0.1
Y0.05
12.0+0.08
-0.2
0.3T0.05 7.3T0.01
5.5T0.05 1.75T0.1
1.9T0.1
10° max.
Peeling strengh (0.1Y0.7N)
Cover film
Part number marked side is always facing up.
The feeding holes side of cavity tape is always input terminal. User Direction of Feed
3.0T0.1
4.0T0.1
φ1.5 W0.1
Y0.0 2.0T0.05 4.0T0.1
(in mm)
3° max.
∗
∗∗
∗
∗∗
∗
∗∗
∗
∗∗
∗
∗∗
Chip Filter
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
109
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 10.7MHz Lead Type SF_LA Series
(in mm)
Lead length under the hold down tape
Length of cut off
Pitch of components
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to component center
Lead spacing (I)
Lead spacing (II)
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of sprocket
hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
Item Code Dimensions Tolerance Remarks
L1
L2
P
P0
P1
P2
F
F1
dh
dS1
W
W0
W1
W2
H0
D0
t
P020
3.0 min.
2.0 max.
12.7
12.7
3.85
6.35
5.0
2.5
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
To distinguish the direction
Hold down tape doesn't exceed
the carrier tape
The pitch of 20 sprocket holes
±0.5
±0.2
±0.5
±0.5
±0.2
±1.0
±1.0
±0.5
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
–0.2
+0.5
–0
P2P
P1
P0
F
F1F1
W
L1
L2
W0
W1
H0
W2
D0
t
dS1
dh dh
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
110
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 4.5-6.5MHz Chip Type SFSKA Series
User direction of feed
Chip filter
Cover film
Peeling strength
(0.1—0.7N)
+0.1
–0.0
+0.1
–0.05
ø1.5 2.0±0.1 4.0±0.1
1.75±0.1
7.5±0.1
16.0±0.2
2.3±0.1
2.1
0.3±0.05 9.0±0.1
4.3±0.1
3˚ max.
10˚ max.
8.0±0.1
Part Number marked side is always facing up.
21.5±0.5
(ø330)
(ø80)
17.5±1.5
Empty
240-280 min.
400-560
40-190
ComponentsEmpty
Trailer Leader
Cover Film
2.2±0.5
ø13.0±0.2
(in mm)
Dimensions of carrier tapeDimensions of Reel
+0.1
–0.0
ø1.5
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
111
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 4.5-6.5MHz Lead Type SFSRA Series
(in mm)
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to
component center
Lead spacing (I)
Lead spacing (II)
Slant to the forward or backward
Width of carrier tape
Width of hold down tape
Position of Sprocket hole
Gap of hold down tape and carrier Tape
Distance between the center of
sprocket hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
Body tilt
Item Code Dimensions Tolerance Remarks
L1
P
P0
P1
P2
F1
F2
dh
W
W0
W1
W2
H0
D0
t
P020
dS
5.0 min.
12.7
12.7
3.85
6.35
2.5
2.5
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
0
±0.5
±0.2
±0.5
±0.5
±0.2
±0.2
±1.0
±0.5
±0.5
±0.5
±0.2
±0.2
±1.5
±1.0
Tolerance for Pitches 10ZP0=127±1
Hold down tape doesn't exceed the carrier tape.
The pitch of 20 sprocket holes
M M
P2P
dS
W
H0
W1
W0
L1
W2
D0
t
P0
P1F1F2
Direction Feed
dh dh
+0.5
–0
∗∗
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
112
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 455kHz Chip Type PFWCC Series
M∗
12.0±0.3
5.5±0.1 1.75±0.1
3° max.
10˚ max.
Cap Chip
4.0±0.1
2.0±0.1
ø1.55±0.1
8.0±0.1
5.4±0.1
Peeling strength
(0.1—0.7N)
Cover film
User direction of feed
0.3
(0.07)
3.15±0.1
(3.6 max.)
Part Number marked side is always facing up.
ø13.0±0.5
(ø180)
2.0
14.0±1.5
20.5 max. (in mm)
+0.5
-0.2
6.1±0.1
M∗
M∗
Dimensions of Carrier Tape Dimensions of Reel
■ CERAFILr 455kHz Chip Type SFPCA Series
Dimensions of Carrier Tape
User direction of feed
12.0±0.1
16.0±0.2
8.8±0.1
7.5±0.1 1.75±0.1
4.0±0.1
2.0±0.1
5.3±0.1
Ø1.5
7.4±0.1
+0.1
-0
Cover film
(in mm)
Dimensions of Reel
Label
Ø13.0±0.2
2.2±0.5
21.5±1.5
(Ø330)
(Ø80)
240~280
400~560
40~200
17.5±1.0
EmptyComponents
Cover Film
Empty
Trailer Leader
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
113
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 455kHz Lead Type PFSLA/PFWLA Series
(in mm)
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole (1)
Length from hole center to lead
Length from hole center to
component center
Lead spacing (1)
Lead spacing (2)
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of
sprocket hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (2)
Item Code Dimensions Note
L1
P
P0
P1
P2
F
F1
dh
dS1
W
W0
W1
W2
H0
D0
t
P020
3.0 min.
12.7
12.7
3.85
6.35
5.0
2.5
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
Tolerance
±0.5
±0.2
±0.5
±0.5
±0.2
±1.0
±1.0
±0.5
±0.5
±0.5
±0.2
±0.2
±1.5
Hold-down tape doesn't exceed the carrier tape.
The pitch of 20 sprocket holes
t
H0
W1
W0
D0
W2
P2
dS1
P
P0
F1F1
FP1
L1
dh dh
W
W0.5
Y0.2
W0.5
Y0.2
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
114
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 455kHz Lead Type SFULA Series
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with the
marking of products all facing toward the "muRata" mark on
a magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Dimensions of Magazine Cassette
Material : Polycarbonate
Camber of Case : ±1mm max. against entire length (reference)
Twist of Case : ±0.5mm max. (reference)
in mm
Tolerance unless otherwise specified : ±0.2
5.6±0.3
18.7±0.3
10±0.38.1±0.3
4.2±0.25
1.1 1.1
+0
–2
*
M*
M
390
■ CERAFILr 455kHz Lead Type SFZLA Series
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with the
marking of products all facing toward the "muRata" mark on
a magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Dimensions of Magazine Cassette
Material : Polycarbonate
Camber of Case : ±1mm max. against entire length (reference)
Twist of Case : ±0.5mm max. (reference)
in mm
Tolerance unless otherwise specified : ±0.2
1.1
1.1
7.6±0.25
9.0±0.3
18.7±0.3
10.0±0.3
8.1±0.3
+0
–2
*
M*
M*
M
390
■ CERAFILr 455kHz Lead Type SFPLA Series
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, which
ground terminals are all facing toward the "muRata" mark on
a magazine, and be closed with exclusive stoppers at the
both ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Dimensions of Magazine Cassette
Material : Polycarbonate
Camber of Case : ±1mm max. against entire length (reference)
Twist of Case : ±0.5mm max. (reference)
in mm
Tolerance unless otherwise specified : ±0.2
HP51M0003-02
405±1.0
9.0±0.3
7.6±0.25
18.7±0.3
10±0.38.1±0.3
1.1 1.1
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
115
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CERAFILr 455kHz Lead Type CFWLA Series
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with
ground terminals all facing toward the "muRata" mark on a
magazine, and be closed with exclusive stoppers at the both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note : Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Magazine should be packaged in a cardboard box.
MURATA model name, quantity and outgoing inspection
number should be indicated on the box.
Cardboard box may contain maximum 33 magazines (1,650
pieces of filter).
4. Dimensions of Magazine Cassette
Material : Polycarbonate
Camber of Case : ±1mm max. against entire length (reference)
Twist of Case : ±0.5mm max. (reference)
in mm
Tolerance unless otherwise specified : ±0.2
muRataHP51M0064
576.0±2.0
9.0±0.3
7.3±0.25
7.5±0.3
18.7±0.3
9.0±0.3
ANTISTATIC
5.3±0.3
0.6
■ Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
User direction of feed
Chip filter
Cover film
Peeling strength
(0.1—0.7N)
+0.1
–0.0
+0.1
–0.05
ø1.5 2.0±0.1 4.0±0.1
1.75±0.1
7.5±0.1
16.0±0.2
2.3±0.1
2.1
0.3±0.05 9.0±0.1
4.3±0.1
3˚ max.
10˚ max.
8.0±0.1
Part Number marked side is always facing up.
21.5±0.5
(ø330)
(ø80)
17.5±1.5
Empty
240-280 min.
400-560
40-190
ComponentsEmpty
Trailer Leader
Cover Film
2.2±0.5
ø13.0±0.2
(in mm)
Dimensions of carrier tapeDimensions of Reel
+0.1
–0.0
ø1.5
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
116
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Trap 4.5-6.5MHz Chip Type TPWKA Series
+0.1
–0.0
ø1.5
+0.1
–0.0
ø1.5
+0.1
–0.05
1.75
Part Number marked side is always facing up.
21.5±0.5
(ø330)
(ø80)
17.5±1.5
Empty
240-280 min.
400-560
40-190
ComponentsEmpty
Trailer Leader
Cover Film
2.2±0.5
ø13.0±0.2
(in mm)
Dimensions of carrier tapeDimensions of Reel
∗
∗
∗
2.0±0.1
5.5±0.18.0±0.1
4.0±0.1
1.75±0.1
16.0±0.2
7.5±0.1
9.0±0.1
0.3±0.05
1.95±0.1
Chip filter
3˚ max.
10˚ max.
peeling strength
(0.1—0.7N)
Cover film
User direction of feed
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
117
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Trap 4.5-6.5MHz Lead Type TPSRA Series
(in mm)
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to
component center
Lead spacing (I)
Lead spacing (II)
Slant to the forward or backward
Width of carrier tape
Width of hold down tape
Position of Sprocket hole
Gap of hold down tape and carrier Tape
Distance between the center of
sprocket hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
Body tilt
Item Code Dimensions Tolerance Remarks
L1
P
P0
P1
P2
F1
F2
dh
W
W0
W1
W2
H0
D0
t
P020
dS
5.0 min.
12.7
12.7
3.85
6.35
2.5
2.5
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
0
±0.5
±0.2
±0.5
±0.5
±0.2
±0.2
±1.0
±0.5
±0.5
±0.5
±0.2
±0.2
±1.5
±1.0
Tolerance for Pitches 10ZP0=127±1
Hold down tape doesn't exceed the carrier tape.
The pitch of 20 sprocket holes
M M
P2P
dS
W
H0
W1
W0
L1
W2
D0
t
P0
P1F1F2
Direction Feed
dh dh
+0.5
–0
∗∗
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
118
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Trap 3.5-6.5MHz Lead Type TPSRD Series
(in mm)
Hold down tape doesn't exceed the carrier tape
The pitch of 20 sprocket holes
P2P
P1
P0
F
W
L1
W0
W1
H0
W2
D0
t
dS1
Item Code Dimensions Tolerance Remarks
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to component center
Lead spacing
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
L1
P
P0
P1
P2
F
dh
dS1
W
W0
W1
W2
H0
D0
t
Po20
3.0 min.
12.7
12.7
3.85
6.35
5.0
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
———
±0.5
±0.2
±0.5
±0.5
±1.0
±1.0
±0.5
———
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
-0.0
+0.5
-0.2
dh dh
Gap of hold down tape and
carrier tape
Distance between the center of
sprocket hole and lead stopper
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
119
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Trap 3.5-6.5MHz Lead Type TPSRD_W/TPWRD/TPTRD Series
(in mm)
Lead length under the hold down tape
Length of cut off
Pitch of components
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to component center
Lead spacing (I)
Lead spacing (II)
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of sprocket
hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
Item Code Dimensions Tolerance Remarks
L1
L2
P
P0
P1
P2
F
F1
dh
dS1
W
W0
W1
W2
H0
D0
t
P020
3.0 min.
2.0 max.
12.7
12.7
3.85
6.35
5.0
2.5
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
To distinguish the direction
Hold down tape doesn't exceed
the carrier tape
The pitch of 20 sprocket holes
±0.5
±0.2
±0.5
±0.5
±0.2
±1.0
±1.0
±0.5
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
–0.2
+0.5
–0
P2P
P1
P0
F
F1F1
W
L1
L2
W0
W1
H0
W2
D0
t
dS1
dh dh
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
120
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Discriminator 10.7MHz Chip Type CDSCB Series
(in mm)
4.0±0.1
Cover film
4.0±0.1
2.0±0.05
12.0±0.2
(9.0)
ø1.5
+0.1
-0
ø1.5
+0.1
-0
5.5±0.05 1.75±0.1
4.7±0.1
Direction of feedPart number marked side is always facing up.
0.3±0.05
(1.7 max.)
1.1±0.1
3˚max.
2.2±0.1
Peeling strength
0.1-0.7N 10˚
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
121
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Discriminator 10.7MHz Lead Type CDALA Series
(in mm)
Hold down tape doesn't exceed the carrier tape
The pitch of 20 sprocket holes
P2P
P1
P0
F
W
L1
W0
W1
H0
W2
D0
t
dS1
Item Code Dimensions Tolerance Remarks
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to component center
Lead spacing
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
L1
P
P0
P1
P2
F
dh
dS1
W
W0
W1
W2
H0
D0
t
Po20
3.0 min.
12.7
12.7
3.85
6.35
5.0
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
———
±0.5
±0.2
±0.5
±0.5
±1.0
±1.0
±0.5
———
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
-0.0
+0.5
-0.2
dh dh
Gap of hold down tape and
carrier tape
Distance between the center of
sprocket hole and lead stopper
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
122
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Discriminator 3.5-6.5MHz CDSRH_EK Series
(in mm)
Hold down tape doesn't exceed the carrier tape
The pitch of 20 sprocket holes
P2P
P1
P0
F
W
L1
W0
W1
H0
W2
D0
t
dS1
Item Code Dimensions Tolerance Remarks
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to component center
Lead spacing
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
L1
P
P0
P1
P2
F
dh
dS1
W
W0
W1
W2
H0
D0
t
Po20
3.0 min.
12.7
12.7
3.85
6.35
5.0
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
———
±0.5
±0.2
±0.5
±0.5
±1.0
±1.0
±0.5
———
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
-0.0
+0.5
-0.2
dh dh
Gap of hold down tape and
carrier tape
Distance between the center of
sprocket hole and lead stopper
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Packaging
123
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Ceramic Discriminator 3.5-6.5MHz CDSRH_CK Series
(in mm)
Lead length under the hold down tape
Length of cut off
Pitch of components
Pitch of sprocket hole (I)
Length from hole center to lead
Length from hole center to component center
Lead spacing (I)
Lead spacing (II)
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of sprocket
hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (II)
Item Code Dimensions Tolerance Remarks
L1
L2
P
P0
P1
P2
F
F1
dh
dS1
W
W0
W1
W2
H0
D0
t
P020
3.0 min.
2.0 max.
12.7
12.7
3.85
6.35
5.0
2.5
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
To distinguish the direction
Hold down tape doesn't exceed
the carrier tape
The pitch of 20 sprocket holes
±0.5
±0.2
±0.5
±0.5
±0.2
±1.0
±1.0
±0.5
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
–0.2
+0.5
–0
P2P
P1
P0
F
F1F1
W
L1
L2
W0
W1
H0
W2
D0
t
dS1
dh dh
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Head Office
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
http://www.murata.com/
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note P50E.pdf 03.4.16
Note:
1. Export Control
<
For customers outside Japan
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
<
For customers in Japan
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.
qAircraft equipment wAerospace equipment
eUndersea equipment rPower plant equipment
tMedical equipment yTransportation equipment (vehicles, trains, ships, etc.)
uTraffic signal equipment iDisaster prevention / crime prevention equipment
oData-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.