!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. P50E.pdf 03.4.16 CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr (Filters/Traps /Discriminators) for AUDIO/VISUAL EQUIPMENT Murata Manufacturing Co., Ltd. Cat.No.P50E catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CONTENTS 1 2 CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 3 Part Numbering 2 4 1 CERAFILr 10.7MHz Small Chip Type SFECS Series 6 2 CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series 9 3 CERAFILr 10.7MHz Chip Type SFECV Series 11 4 CERAFILr 10.7MHz Standard Lead Type 14 5 CERAFILr 10.7MHz Low Loss Type 17 6 CERAFILr 10.7MHz Low Profile Type 20 7 CERAFILr 10.7MHz Low Spurious Response Type 23 9 8 CERAFILr 10.7MHz Wide Bandwidth Type 26 10 9 CERAFILr 10.7MHz Narrow Bandwidth Type 28 10 CERAFILr 10.7MHz for FM-IF Tuners 31 11 CERAFILr 10.7MHz High Selectivity Type SFTLA Series 36 12 CERAFILr 10.7MHz Related Data on Lead Type 39 13 12 CERAFILr 4.5-6.5MHz Chip Type SFSKA Series 40 13 CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series 41 14 CERAFILr 3.5-6.5MHz Low Profile Type SFSRL Series 46 14 15 15 CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/L Series 49 16 16 CERAFILr 455kHz Chip Type PFWCC Series 51 17 CERAFILr 455kHz Chip Type SFPCA Series 53 17 18 CERAFILr 455kHz SFULA/SFZLA Series 55 18 19 CERAFILr 455kHz PFSLA/PFWLA Series 58 19 20 CERAFILr 455kHz SFPLA/CFWLA Series 60 21 CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 62 22 CERAFILr 455kHz for Search-stop Signal Detection 64 20 21 CERAFILr 455kHz SF/PF Series Temperature Characteristics 65 22 CERAFILr 455kHz SF/PF/BF Series Application Circuit 66 23 Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 68 23 24 Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series 69 24 25 Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series 70 25 26 Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRD Series 73 27 Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRD Series 76 26 28 Ceramic Trap 3.5-6.5MHz Double Traps TPWRD Series 77 29 Ceramic Trap 3.5-6.5MHz Triple Traps TPTRD Series 79 30 Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series 80 31 Ceramic Discriminator 10.7MHz Standard Lead Type CDALA Series 84 Ceramic Discriminator 10.7MHz Appllied IC Reference Table 88 30 Ceramic Discriminator 10.7MHz Appllied Circuit 90 31 32 Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRH Series 92 33 Ceramic Discriminator 3.5-6.5MHz Low Profile Type CDSRL Series 32 94 Notice (Soldering and Mounting) 96 Notice (Handling) 100 Packaging 107 Recycled Paper 5 6 7 8 11 27 28 29 33 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. o Part Numbering CERAFILr for FM (Global Part Number) SF E LA q w e 10M7 FAA0 r -B0 t y qProduct ID tProduct Specification Product ID Code SF Ceramic Filters FAA0 wOscillation/Numbers of Element Product Specification Four-digit alphanumerics express pass-bandwidth, center frequency tolerance, rank, series, others. Code Oscillation/Numbers of Element E 2 Elements Thickness Expander mode T 3 Elements Thickness Expander mode Code V 2 Elements Thickness Expander mode (2nd Harmonic) -B0 Bulk -R0 Plastic Taping o180mm K 2 Elements Thickness Expander mode (3rd Over Tone) -R1 Plastic Taping o330mm -A0 1500pcs. /Radial Taping H0=18mm -A1 1000pcs. /Radial Taping H0=18mm eStructure/Size Code Structure/Size Lp Lead Type Cp Chip Type yPackaging Packaging Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging". p is expressed "A" or subsequent code, which indicates the size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". CERAFILr for TV/VCR (Global Part Number) SF S RA 4M50 CF 00 -B0 q w e r t y u qProduct ID tProduct Specification Code (1) Product ID SF Ceramic Filters wOscillation/Numbers of Element Code Product Specification Code (1) AF Standard Bandwidth Type BF Tight Bandwidth Type CF Standard Bandwidth Type Code Oscillation/Numbers of Element DF Broad Bandwidth Type S 2 Elements Thickness Shear mode EF Ultra-broad Bandwidth Type T 3 Elements Thickness Expander mode The code AF is only applied to SFT series. yProduct Specification Code (2) eStructure/Size Code Structure/Size Code Product Specification Code (2) Rp Lead Type 00 Standard Type Kp Chip Type p is expressed "A" or subsequent code, which indicates the size. uPackaging Code Packaging rNominal Center Frequency -B0 Bulk Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". -A0 Radial Taping H0=18mm -R1 Plastic Taping o=330mm Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification Code (1)" and "yProduct Specification Code (2)". 2 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr for AM (Global Part Number) PF W LA 450K P2A -B0 q w e r t y tProduct Specification qProduct ID Product ID PF Ceramic Filters SF Ceramic Filters CF Ceramic Filters Code Product Specification P2A Standard Type ppA indicates standard type. yPackaging wOscillation/Numbers of Element Code Packaging Oscillation/Numbers of Element -B0 Bulk S 1 Element Length mode -R0 Plastic Taping (o180mm) W 2 Elements Length mode -R1 Plastic Taping (o330mm) Code U 1 Element Area Expansion mode -A0 Radial Taping H0=18mm Z 2 Elements Area Expansion mode -M0 Magazine Cassette P 4 Elements Area Expansion mode eStructure/Size Code Structure/Size Lp Lead Type Cp Chip Type Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging". p is "A" or subsequent code, which indicates the size. It varies depending on vibration mode and number of elements. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz". CERAFILr for Search-stop Signal Detection (Global Part Number) BF U LA q w e 450K C -B0 r t y qProduct ID tProduct Specification Product ID BF Resonator Code Product Specification Cp Bandwidth With standard type, p is omitted. wOscillation/Numbers of Element Code Oscillation/Numbers of Element U 1 Element Area Expansion mode eStructure/Size Code Structure/Size LA Lead Type Standard yPackaging Code Packaging -B0 Bulk Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, "Individual Specification (serial number)" and "Lead Shape (Lead Bend : B)" are added between "tProduct Specification" and "yPackage Specification Code" upon specification. rNominal Center Frequency Code Nominal Center Frequency 450K 450kHz 3 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Ceramic Traps (Global Part Number) TP S RA 4M50 q w e r 00 -B0 t y u B qProduct ID tProduct Specification Code (1) Product ID TP Ceramic Traps Code Product Specification (1) B Broad-bandwidth Type C Low-capacitance Type wFunction yProduct Specification Code (2) Code Function S Single Traps Code Product Specification Code (2) T Triple Traps 00 Standard Type W Double Traps uPackaging eStructure/Size Code Code Structure/Size Rp Lead Type Kp Chip Type p is expressed "A" or subsequent code, which indicates the size. rNominal Center Frequency Packaging -B0 Bulk -A0 Radial Taping H0=18mm -R1 Plastic Taping o=330mm Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "yProduct Specification Code (2)" and "uPackaging". Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". Discriminators for FM (Global Part Number) CD A LA 10M7 GA 001 -B0 q w e r t y u qProduct ID tProduct Specification Product ID CD Discriminators Code Product Specification GA Two-digit alphanumerics express type, center frequency, rank, others wOscillation Oscillation A Thickness Expander mode Code IC S Thickness Shear mode 001 Applicable IC Control Code eStructure/Size uPackaging Packaging Code Structure/Size Code Lp Lead Type -B0 Bulk Cp Chip Type -A0 Radial Taping H0=18mm -R0 Plastic Taping o=180mm -R1 Plastic Taping o=330mm p is expressed "A" or subsequent code, which indicates the size. rNominal Center Frequency Expressed by four-digit alphanumerics . The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". 4 yIC Code Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, an alphanumerics indicating "Individual Specification" is added between "yIC" and "uPackaging". P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Discriminators for TV/VCR (Global Part Number) CD S RH 4M50 q w e r E K t y 048 -A0 u i yProduct Specification Code (2) qProduct ID Product ID CD Discriminators wOscillation Code Product Specification Code (2) K Specification uIC Code Oscillation Code IC S Thickness Shear mode 048 Applicable IC control code eStructure/Size iPackaging Code Structure/Size Code RH Standard Type -B0 Packaging Bulk RL Low-profile -A0 Radial Taping H0=18mm With non-standard products, a letter Indicating "Individual Specification" is added between "uIC" and "iPackaging". rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". tProduct Specification Code (1) Code Product Specification Code (1) C Three-terminals E Two-terminals 5 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 1 CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Small Chip Type SFECS Series 3.450.2 3.100.2 SFECS10M7 series for FM-receivers are small, high performance and super thin (1.5mm max.) filters. Piezoelectric element is connected in the sandwich shape by ceramics substrate. They have 1.5mm max. thickness and small mounting area. (3.45x3.1mm) SFECS series and PFWCC (kHz filter for AM receiver) enable customers to make AM/FM set so thin and small sized. 1.40.1 Input electrode marker +0.3 0~0.3 0.60.3 0.4-0.2 0.60.3 0~0.3 0.850.3 (1.35) (1.35) 0.70.3 0.70.3 0.70.3 (1) (2) (4) 0.850.3 Features (3) 0~0.3 (1) : Input (2) : Ground (3) : Float (Signal line) (4) : Output ( ) : Reference : EIAJ Monthly Code (in mm) (1.30) (1.30) 0~0.3 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.5mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating temperature range : -20 to +80 (degree C) Storage temperature range : -40 to +85 (degree C) Applications 1. Small, thin radios 2. Headphone stereos Part Number Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFECS10M7HA00-R0 10.700 30kHz - 180 40kHz 470 max. 4.5 2.0dB 30 min. 330 SFECS10M7GA00-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 30 min. 330 SFECS10M7FA00-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 30 min. 330 SFECS10M7EA00-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 30 min. 330 - 10.700 fn 200kHz min. 950 max. 3.0 2.0dB 20 min. 330 SFECS10M7DF0021-R0 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 6 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit 1 0.1 Standard Land Pattern Dimensions 0.3 (3) (2) R1 1.05 0.1 (4) 0.1 1.40 0.3 (1) E1 0.3 (3) 0.1 R2 C2 E2 RF Voltmeter S.S.G. =-10dBm 1.05 (2) 0.1 (1) (4) Rg 0.1 0.8 0.6 0.8 0.6 Rg=50 R1=280 R2=330 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) 0.8 (1) : Input (2) : Ground (3) : Float Signal Line (4) : Out put (in mm) It shows solder resist land pattern. (1) : Input (2) : Ground (3) : Float (4) : Output Frequency Characteristics SFECS10M7HA00-R0 SFECS10M7GA00-R0 0 5.60 5.00 4.80 5.40 5.20 2 2 4.60 4.60 4.40 6 4.40 Attenuation (dB) 4.80 4 G.D.T. (sec.) Attenuation (dB) 5.00 4 4.20 4.00 6 3.80 4.20 3.60 4.00 8 8 3.40 3.80 10 10.500 10.600 10.700 10.800 10.900 G.D.T. (sec.) 0 3.20 3.60 10 10.500 10.600 Frequency (MHz) 10.700 10.800 10.900 3.00 Frequency (MHz) SFECS10M7FA00-R0 0 4.60 4.40 2 4.20 3.80 3.60 6 3.40 G.D.T. (sec.) Attenuation (dB) 4.00 4 3.20 8 3.00 2.80 10 10.500 10.600 10.700 10.800 10.900 2.60 Frequency (MHz) Frequency Characteristics (Spurious) SFECS10M7GA00-R0 0 0 10 10 Attenuation (dB) Attenuation (dB) SFECS10M7HA00-R0 20 30 40 50 8.700 20 30 40 9.700 10.700 Frequency (MHz) 11.700 12.700 50 8.700 9.700 10.700 11.700 12.700 Frequency (MHz) Continued on the following page. 7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFECS10M7FA00-R0 0 10 Attenuation (dB) 1 20 30 40 50 8.700 9.700 10.700 Frequency (MHz) 8 11.700 12.700 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment 2 CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series 1.0 max. 3.450.2 3.10.2 SFECD10M7 series for FM-receivers are small, high performance and ultra thin (1.0mm max.) filters. Piezoelectric element is connected in the sandwich shape by very thin ceramics substrate. They have 1.0mm max. thickness and small mounting area. (3.45x3.1mm) SFECD series enable customers to make RF modules so thin and small sized. 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) Features (1) (4) (2) (3) (2) (3) (1.28)(1.28) 0 to 0.35 0.750.3 0.850.3 0.850.3 0.650.3 0.550.3 0.650.3 0 to 0.35 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Operating temperature range : -20 to +80 (degree C) Storage temperature range : -40 to +85 (degree C) (1) : Input (2) : Ground (3) : Float (Signal line) (4) : Output : Marking : EIAJ Monthly Code : Center Frequency Rank Code ( ) : Reference (in mm) Applications 1. Card type radios 2. Card type RKE modules 3. Card type PHS modules Part Number SFECD10M7FA00-R0 Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) 10.700 30kHz 280 50kHz 590 max. 3.0 2.0dB 30 min. 330 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 9 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Dimensions 0.1 2 Test Circuit (3) (3) (3) (2) 1.05 (2) 0.1 0.3 (4) (2) R1 1.40 0.3 (1) 0.1 E1 (3) 0.1 R2 C2 E2 S.S.G. 1.05 (2) 0.1 0.3 (1) (4) Rg RF Voltmeter 0.1 0.8 0.5 0.8 0.5 0.8 (1) : Input (2) : Ground (3) : Float (Signal Line) (4) : Output (in mm) It shows solder resist land pattern. Frequency Characteristics R1+Rg=R2=3305%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Ground (3) : Float (4) : Output Frequency Characteristics (Spurious) SFECD10M7FA00-R0 SFECD10M7FA00-R0 0 10 0 9 2 10 8 6 5 6 4 Attenuation (dB) 4 G.D.T. (sec.) Attenuation (dB) 7 20 30 3 8 2 40 1 10 10.500 10.600 10.700 Frequency (MHz) 10 10.800 10.900 0 50 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Chip Type SFECV Series 3 6.90.3 4.050.4 SFECV10M7 series for FM-receivers are monolithic type ceramic filters which utilize the thickness expander mode of the piezoelectric ceramic. SFECV series and PFWCC(kHz filter for AM receiver) enable customers to make AM/FM set so thin, and it can be of help to the total chip circuit. 2.90.3 1.20.5 1.20.3 * * * (3) (2) (1) Side Electrode 1.50.2 Bottom Electrode Features 1. Piezoelectric element is connected in the sandwich shape by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 2. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 1.50.2 1.20.5 : Marking 1.00.5 1.00.5 ** : EIAJ Monthly Code ** : Center Frequency Rank Code 1.00.5 (1) : Input (2) : Ground (3) : Output (in mm) Applications 1. Small, thin radios 2. Automotive radios 3. Headphone steros Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFECV10M7KA00-R0 10.700 30kHz 110 30kHz 320 max. 6.0 2.0dB 35 min. 330 SFECV10M7JA00-R0 10.700 30kHz 150 40kHz 380 max. 5.5 2.0dB 35 min. 330 SFECV10M7HA00-R0 10.700 30kHz 180 40kHz 470 max. 4.0 2.0dB 35 min. 330 SFECV10M7GA00-R0 10.700 30kHz 230 50kHz 510 max. 3.5 2.0dB 35 min. 330 SFECV10M7FA00-R0 10.700 30kHz 280 50kHz 590 max. 3.0 2.0dB 35 min. 330 Part Number Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 11 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Dimensions 1.2 1.2 Test Circuit 1.2 (1): Input (2): Ground (3): Output 3 R1 (2) Rg 4.0 (3) (1) E1 R2 C2 E2 S.S.G. =-10dBm 1.65 1.65 2.85 2.85 Land RF Voltmeter Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. S.S.G. Output Voltage (in mm) Frequency Characteristics 8.00 1 6.50 1 7.50 2 6.00 2 7.00 3 5.50 3 6.50 4 5.00 4 6.00 5 4.50 5 5.50 6 4.00 6 5.00 3.50 7 7 10.600 10.700 Frequency (MHz) 10.800 10.900 4.50 10.620 1 5.50 2 5.00 3 4.50 4 4.00 5 3.50 6 3.00 10.600 10.700 Frequency (MHz) 10.800 10.900 5.00 1 4.50 2 4.00 3 3.50 4 3.00 5 2.50 6 2.00 12 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 1.50 G.D.T. (sec.) Attenuation (dB) SFECV10M7FA00-R0 0 7 10.740 10.780 0 5.50 1 5.00 2 4.50 3 4.00 4 3.50 5 3.00 6 2.50 7 2.50 7 Attenuation (dB) 6.00 10.500 10.700 Frequency (MHz) SFECV10M7GA00-R0 0 G.D.T. (sec.) Attenuation (dB) SFECV10M7HA00-R0 10.660 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 2.00 G.D.T. (sec.) 10.500 Attenuation (dB) 0 G.D.T. (sec.) SFECV10M7JA00-R0 7.00 G.D.T. (sec.) Attenuation (dB) SFECV10M7KA00-R0 0 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFECV10M7JA00-R0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFECV10M7KA00-R0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 10 10 20 20 30 40 11.700 12.700 40 50 60 60 10.700 Frequency (MHz) 10.700 Frequency (MHz) 30 50 9.700 9.700 SFECV10M7GA00-R0 0 Attenuation (dB) Attenuation (dB) SFECV10M7HA00-R0 0 70 8.700 3 11.700 12.700 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFECV10M7FA00-R0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 13 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Standard Lead Type 4 7.02.0 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE Features 7.02.0 MARKING 0.50.1 2.50.2 2.50.2 3.01.0 SFELA10M7HA00-B0 0.30.1 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 MARKING EIAJ CODE 7.02.0 1. These miniature filters have high mechanical strength. 2. Low loss, favorable waveform symmetry, and high selectivity 3. Various band widths are available for applications in wide to narrow bands. 4. Small dispersion and stable characteristics 5. Change in center frequency is typically within +-30ppm/(degree C) at -20 to +80 (degree C). 6. High reliability 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELA10M7GA00-B0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELA10M7FA00-B0 0.30.1 2.50.2 2.50.2 (3) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) SFELA10M7HA00-B0 10.700 30kHz 180 40kHz SFELA10M7GA00-B0 10.700 30kHz 230 50kHz SFELA10M7FA00-B0 10.700 30kHz 280 50kHz Part Number (in mm) (1) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) 520 max. 7.0 max. 40 min. 330 570 max. 4.0 2.0dB 40 min. 330 650 max. 4.0 2.0dB 30 min. 330 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 14 (2) (1) : Input (2) : Ground (3) : Output P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C 4 Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 5.50 1 5.50 1 5.00 2 5.00 2 4.50 3 4.50 3 4.00 4 4.00 4 3.50 5 3.50 5 3.00 6 3.00 6 2.50 2.50 7 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 0 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) SFELA10M7GA00-B0 6.00 G.D.T. (sec.) Attenuation (dB) SFELA10M7HA00-B0 0 2.00 5.00 1 4.50 2 4.00 3 3.50 4 3.00 5 2.50 6 2.00 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) Attenuation (dB) SFELA10M7FA00-B0 0 1.50 15 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFELA10M7HA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 4 SFELA10M7GA00-B0 0 30 40 50 60 60 9.700 10.700 Frequency (MHz) 11.700 12.700 11.700 12.700 SFELA10M7FA00-B0 0 10 20 Attenuation (dB) 40 50 70 8.700 30 40 50 60 70 8.700 16 30 9.700 10.700 Frequency (MHz) 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Low Loss Type 7.02.0 5 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE Features 7.02.0 MARKING 1. Insertion loss is 1 to 1.5dB lower than conventional products. These types are useful for elevating the sensitivity of sets. 2. Small dispersion and stable characteristics 3. Excellent shape factor of frequency response 4. Good waveform symmetry 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 SFELA10M7JAA0-B0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 3.01.0 (3) MARKING MARKING 7.02.0 7.02.0 EIAJ CODE 0.50.1 (3) (2) (1) : Input (2) : Ground (3) : Output SFELA10M7FAA0-B0 0.30.1 2.50.2 2.50.2 3.01.0 SFELA10M7GAA0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) (1) (2) 7.02.0 EIAJ CODE (1) : Input (2) : Ground (3) : Output 7.02.0 SFELA10M7HAA0-B0 0.30.1 2.50.2 2.50.2 (in mm) (1) (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELA10M7JAA0-B0 10.700 30kHz 150 40kHz 360 max. 4.5 2.0dB 35 min. 330 SFELA10M7HAA0-B0 10.700 30kHz 180 40kHz 470 max. 3.5 1.5dB 35 min. 330 SFELA10M7GAA0-B0 10.700 30kHz 230 50kHz 520 max. 3.0 2.0dB 35 min. 330 SFELA10M7FAA0-B0 10.700 30kHz 280 50kHz 590 max. 2.5 2.0dB 30 min. 330 Part Number Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 17 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code 5 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 6.50 1 7.00 1 6.00 2 6.50 2 5.50 3 6.00 3 5.00 4 5.50 4 4.50 5 5.00 5 4.00 6 4.50 6 3.50 4.00 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.800 10.900 3.00 SFELA10M7FAA0-B0 0 5.50 1 6.00 1 5.00 2 5.50 2 4.50 3 5.00 3 4.00 4 4.50 4 3.50 5 4.00 5 3.00 6 3.50 6 2.50 3.00 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 6.50 7 18 10.700 Frequency (MHz) 0 G.D.T. (sec.) Attenuation (dB) SFELA10M7GAA0-B0 10.600 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 2.00 G.D.T. (sec.) 7 Attenuation (dB) 0 G.D.T. (sec.) SFELA10M7HAA0-B0 7.50 G.D.T. (sec.) Attenuation (dB) SFELA10M7JAA0-B0 0 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFELA10M7HAA0-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7JAA0-B0 0 30 40 30 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 10 10 20 20 30 40 60 60 11.700 11.700 12.700 11.700 12.700 40 50 10.700 Frequency (MHz) 10.700 Frequency (MHz) 30 50 9.700 9.700 SFELA10M7FAA0-B0 0 Attenuation (dB) Attenuation (dB) SFELA10M7GAA0-B0 0 70 8.700 5 40 12.700 70 8.700 9.700 10.700 Frequency (MHz) 19 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Low Profile Type 5.01.0 1.50.1 1.30.1 0.50.1 1. Installed height is 6.0 mm, making it well suited for compact, thin sets. 2. Environmental reliability is the same as those of the ceramic filter SFELA10M7 series. 3.01.0 SFELB10M7KA00-B0 0.30.1 2.50.2 2.50.2 (1) EIAJ CODE EIAJ CODE MARKING 0.50.1 0.50.1 3.01.0 SFELB10M7HA00-B0 in mm (3) (1) MARKING in mm (3) 7.52.0 EIAJ CODE 6.0 max. 7.52.0 (2) (1) : Input (2) : Ground (3) : Output MARKING 0.50.1 3.01.0 2.50.2 2.50.2 (1) (2) (1) : Input (2) : Ground (3) : Output SFELB10M7FA00-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.50.1 1.30.1 5.01.0 1.50.1 1.30.1 EIAJ CODE 6.0 max. (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 (1) 5.01.0 1.50.1 1.30.1 5.01.0 1.50.1 1.30.1 SFELB10M7GA00-B0 in mm (3) 6.0 max. MARKING (2) (1) : Input (2) : Ground (3) : Output 7.52.0 6.0 max. 7.52.0 SFELB10M7JA00-B0 EIAJ CODE MARKING Features 0.30.1 6 SFELB10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expancder mode of the piezoelectric ceramic. 6.0 max. 7.52.0 in mm (3) (1) (2) (1) : Input (2) : Ground (3) : Output in mm (3) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELB10M7KA00-B0 10.700 30kHz 110 30kHz 350 max. 7.0 2.0dB 30 min. 330 SFELB10M7JA00-B0 10.700 30kHz 150 40kHz 360 max. 4.5 2.0dB 35 min. 330 SFELB10M7HA00-B0 10.700 30kHz 180 40kHz 470 max. 3.5 2.0dB 35 min. 330 SFELB10M7GA00-B0 10.700 30kHz 230 50kHz 570 max. 3.0 2.0dB 40 min. 330 SFELB10M7FA00-B0 10.700 30kHz 280 50kHz 650 max. 3.0 2.0dB 30 min. 330 Part Number Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 20 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C 6 Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 8.00 1 7.50 1 7.00 2 7.00 2 6.50 3 6.50 3 6.00 4 6.00 4 5.50 5 5.50 5 5.00 6 5.00 6 4.50 4.50 7 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 10.500 10.700 Frequency (MHz) 10.800 10.900 4.00 SFELB10M7GA00-B0 7.00 0 6.50 1 6.50 1 6.00 2 6.00 2 5.50 3 5.50 3 5.00 4 5.00 4 4.50 5 4.50 5 4.00 6 4.00 6 3.50 3.50 7 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 0 G.D.T. (sec.) Attenuation (dB) SFELB10M7HA00-B0 10.600 7.50 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) 7 Attenuation (dB) 0 G.D.T. (sec.) SFELB10M7JA00-B0 0 G.D.T. (sec.) Attenuation (dB) SFELB10M7KA00-B0 3.00 Continued on the following page. 21 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 6 5.50 1 5.00 2 4.50 3 4.00 4 3.50 5 3.00 6 2.50 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) Attenuation (dB) SFELB10M7FA00-B0 0 2.00 Frequency Characteristics (Spurious) SFELB10M7JA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELB10M7KA00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 SFELB10M7FA00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 22 9.700 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELB10M7GA00-B0 0 Attenuation (dB) Attenuation (dB) SFELB10M7HA00-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Low Spurious Response Type 7.52.0 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE 1.380.2 1.70.1 These types have lower spurious response compared to the standard filters. 0.50.1 7 5.01.0 Features 7.02.0 MARKING 3.01.0 (3) 7.52.0 MARKING MARKING 7.02.0 7.52.0 EIAJ CODE EIAJ CODE 0.50.1 (3) (1) (2) 7.52.0 7.52.0 MARKING MARKING EIAJ CODE EIAJ CODE 0.50.1 (3) (2) SFELA10M7FAB0-B0 (1) 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 3.01.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 SFELA10M7GAB0-B0 3.01.0 (1) (2) 7.02.0 (3) SFELA10M7HAB0-B0 0.30.1 2.50.2 2.50.2 3.01.0 0.30.1 2.50.2 2.50.2 7.02.0 0.50.1 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 SFELA10M7JAB0-B0 (1) (2) 7.02.0 SFELA10M7KAB0-B0 0.30.1 2.50.2 2.50.2 (3) (2) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFELA10M7KAB0-B0 10.700 30kHz 110 30kHz 350 max. 7.0 2.0dB 45/30 min. 330 SFELA10M7JAB0-B0 10.700 30kHz 150 40kHz 380 max. 5.5 2.0dB 45 min. 330 SFELA10M7HAB0-B0 10.700 30kHz 180 40kHz 520 max. 5.0 2.0dB 45 min. 330 SFELA10M7GAB0-B0 10.700 30kHz 230 50kHz 570 max. 3.0 2.0dB 45 min. 330 SFELA10M7FAB0-B0 10.700 30kHz 280 50kHz 650 max. 3.0 2.0dB 45 min. 330 Part Number Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to fo / fo to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 23 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 8.00 1 7.50 1 6.50 2 7.00 2 6.00 3 6.50 3 5.50 4 6.00 4 5.00 5 5.50 5 4.50 6 5.00 6 4.00 4.50 7 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 10.500 SFELA10M7HAB0-B0 10.600 10.700 Frequency (MHz) 10.800 10.900 7.00 3.50 SFELA10M7GAB0-B0 0 6.00 1 6.00 1 5.50 2 5.50 2 5.00 3 5.00 3 4.50 4 4.50 4 4.00 5 4.00 5 3.50 6 3.50 6 3.00 3.00 7 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 6.50 G.D.T. (sec.) 0 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) 7 Attenuation (dB) 0 G.D.T. (sec.) SFELA10M7JAB0-B0 0 G.D.T. (sec.) Attenuation (dB) SFELA10M7KAB0-B0 Attenuation (dB) 7 CODE 2.50 Continued on the following page. 24 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 5.00 1 4.50 2 4.00 3 3.50 4 3.00 5 2.50 6 2.00 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) Attenuation (dB) SFELA10M7FAB0-B0 0 7 1.50 Frequency Characteristics (Spurious) SFELA10M7JAB0-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7KAB0-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 12.700 8.700 0 10 10 20 20 30 40 60 60 9.700 10.700 Frequency (MHz) 11.700 12.700 40 50 8.700 11.700 30 50 70 10.700 Frequency (MHz) SFELA10M7GAB0-B0 0 Attenuation (dB) Attenuation (dB) SFELA10M7HAB0-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELA10M7FAB0-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 25 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Wide Bandwidth Type 7.02.0 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE Features Realizes widerband characteristics not obtained by conventional ceramic filters. 5.01.0 1.380.2 1.70.1 0.50.1 SFELA10M7EA00-B0 3.01.0 0.30.1 2.50.2 2.50.2 (3) (1) : Input (2) : Ground (3) : Output (in mm) (1) (2) 7.02.0 EIAJ CODE 7.02.0 MARKING 5.01.0 1.380.2 1.70.1 0.50.1 2.50.2 2.50.2 SFELA10M7DF00-B0 3.01.0 0.30.1 8 7.02.0 MARKING (3) Part Number Center Frequency (fo) (MHz) SFELA10M7EA00-B0 SFELA10M7DF00-B0 (in mm) (1) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) 10.700 30kHz - 330 50kHz 680 max. 4.0 2.0dB 30 min. 330 - 10.700 fn175 min. 950 max. 3.0 2.0dB 20 min. 470 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 8MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. (fn) means nominal center frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code 26 (2) (1) : Input (2) : Ground (3) : Output CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg Voltmeter C R2 S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) 8 Frequency Characteristics 4.00 1 4.00 1 3.50 2 3.50 2 3.00 3 3.00 3 2.50 4 2.50 4 2.00 5 2.00 5 1.50 6 1.50 6 1.00 1.00 7 7 10.300 10.500 10.700 Frequency (MHz) 10.900 11.100 Attenuation (dB) 0 10.300 10.500 10.700 Frequency (MHz) 10.900 11.100 G.D.T. (sec.) SFELA10M7DF00-B0 4.50 G.D.T. (sec.) Attenuation (dB) SFELA10M7EA00-B0 0 0.50 Frequency Characteristics (Spurious) SFELA10M7DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7EA00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 27 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz Narrow Bandwidth Type 7.0 2.0 Features 7.0 2.0 EIAJ CODE 5.0 1.0 1 .65 0. 1 1 .40 .1 0. 50 .1 3.0 1.0 0.30 .1 2.50.2 2.50.2 SFVLA10M7MF00-B0 (3) (2) (1 ) (in mm) 7.0 2.0 EIAJ CODE 1. 650.1 1.380.2 1.70.1 5.0 1.0 1. 40. 1 0. 50. 1 5.01.0 EI AJ CODE 10.02.0 MARKING MARKING 0.50.1 (1 ) +1.5 3.5 -1.0 SFKLA10M7NL00-B0 (in mm) (3) 7.02.0 MARKING MARKING EIAJ CODE 0.50.1 0.50.1 2.50.2 2.50.2 SFELA10M7KAH0-B0 3.01.0 3.01.0 (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 (3) 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (in mm) (1) (2) 7.02.0 EIAJ CODE (1) : Input (2) : Ground (3) : Output 7.02.0 (2) 2.50.2 2.50.2 7.02.0 (3) (1) : Input (2) : Ground (3) : Output 0.30.1 3.0 1.0 0.30. 1 2.50.2 2.50.2 SFVLA10M7LF00-B0 SFELA10M7LFTA-B0 (1) : Input (2) : Ground (3) : Output 10.02.0 7.0 2.0 0.30.1 9 MARKING SFELA10M7LFTA/KAH0, SFVLA/SFKLA series realizes narrower band characteristics not obtained by conventional ceramic filters. Besides, low spurious and temperature characteristics are stable. This series is suitable for European car-audio or AM up conversion use that needs narrow band characteristics. (in mm) (1) (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFVLA10M7MF00-B0 - 10.700 fn13 min. 135 max. 5.0 2.0dB 35 min. 330 SFVLA10M7LF00-B0 - 10.700 fn25 min. - 5.5 2.5dB 30 min. 330 SFKLA10M7NL00-B0 10.700 15kHz - 20 min. 95 max. 6.0 max. 24 min. 600 SFELA10M7LFTA-B0 - 10.700 fn25 min. 280 max. 7.0 2.0dB 30 min. 330 SFELA10M7KAH0-B0 10.700 30kHz - 110 30kHz 350 max. 7.0 2.0dB 30 min. 330 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 28 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code (SFELA10M7KAH0-B0) CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) 9 RF Rg Voltmeter C R2 S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 19.0 0 13.0 1 18.0 1 12.0 2 17.0 2 11.0 3 16.0 3 10.0 4 15.0 4 9.00 5 14.0 5 8.00 6 13.0 6 7.00 12.0 7 7 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 G.D.T. (sec.) Attenuation (dB) 0 10.620 SFKLA10M7NL00-B0 10.660 10.700 Frequency (MHz) 10.740 10.780 G.D.T. (sec.) SFVLA10M7LF00-B0 6.00 SFELA10M7LFTA01-B0 Attenuation (dB) 10 10.600 10.650 10.700 Frequency (kHz) 10.750 10.800 0 11.00 1 10.50 2 10.00 3 9.50 4 9.00 5 8.50 6 8.00 7 7.50 8 7.00 9 10.580 10.640 10.700 10.760 10.820 G.D.T. (sec.) 0 Attenuation (dB) Attenuation (dB) SFVLA10M7MF00-B0 6.50 Frequency (MHz) Continued on the following page. 29 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 8.00 1 7.50 2 7.00 3 6.50 4 6.00 5 5.50 6 5.00 7 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 G.D.T. (sec.) Attenuation (dB) SFELA10M7KAH0-B0 0 4.50 9 Frequency Characteristics (Spurious) SFVLA10M7LF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFVLA10M7MF00-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 SFKLA10M7NL00-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELA10M7LFTA01-B0 0 0 10 10 20 30 Attenuation (dB) Attenuation (dB) 20 40 50 30 40 50 60 70 60 80 70 9.700 10.200 10.700 11.200 11.700 Frequency (MHz) SFELA10M7KAH0-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 30 9.700 10.700 Frequency (MHz) 11.700 12.700 90 9.700 10.200 10.700 Frequency (MHz) 11.200 11.700 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz for FM-IF Tuners 9.0 max. SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE 2.50.2 2.50.2 (3) (2 ) (in mm) 10. 0 ma x. MARKING EIAJ CODE 5.0 1.0 1. 38 0.2 1. 70 .1 0.5 0. 1 (3) (2 ) ( 1) (in mm) 9.0 max. 11 .0 max. 7.02.0 MARKING EIAJ CODE EIAJ CODE 5.01.0 0.5 0. 1 (1) : Input (2) : Ground (3) : Output SFELA10M7GAXX-B0 2.50.2 2.50.2 (in mm) (3) (1) (2) (2) (in mm) 1.380.2 1.70.1 0.50.1 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output (in mm) SFELA10M7GALP03-B0 0.30.1 2.50.2 2.50.2 4.0 max. (1 ) 5.01.0 0. 50.1 7.02.0 EIAJ CODE 5 .0 1.0 1. 380. 2 1. 70. 1 MARKING 3.01.0 EI AJ CODE 11.0 m ax. MARKING (2 ) (1 ) 7.02.0 9. 0 ma x. (3) (1) : Input (2) : Ground (3) : Output 4.0 max. 3.01.0 0.30.1 2.50.2 2.50.2 0. 30 .1 0.50.1 5. 01 .0 1. 38 0.2 1. 70 .1 1.380.2 1.70.1 (3) (1) : Input (2) : Ground (3) : Output 4.0 max. SFELA10M7HAXD-B0 2.50.2 2.50.2 MARKING 0.3 0.1 (1) 9.0 max. 7.02.0 SFELA10M7HA0G-B0 (1) : Input (2) : Ground (3) : Output 4.0 max. SFELA10M7JAXE-B0 0.3 0.1 0.5 0. 1 0.3 0.1 1. Little dispersion of amplitude characteristics and phase characteristics (G. D. T. characteristics) 2. The SFELA10M7G_X series has G. D. T. characteristics and is useful for obtaining low distortion. SFELA10M7F_L series, in these ceramic filters, being in harmony with flatness of G. D. T., roundness of the amplitude and selectivity characteristics, therefore, these ceramic filters are suitable to high-grade stereo tuners. Even in mismatching conditions, they can keep little distortion because of low Qm of ceramic material. The SFELA10M7FA0G series is based on SFELA10M7FA00/GA00/HA00, and it obtains high selectivity with low loss. There is little dispersion of amplitude and G. D. T. characteristics, and low distortion rate can be obtained. 3. All products are inspected the flatness of G. D. T. characteristics. 5.0 1.0 1. 38 0.2 1. 70 .1 Features SFELA10M7GAXA-B0 10. 0 ma x. MARKING (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Continued on the following page. 31 10 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 7.02.0 MARKING MARKING EIAJ CODE 7.02.0 7.02.0 EIAJ CODE 0.50.1 0.50.1 (3) 7.02.0 MARKING MARKING EIAJ CODE 0.50.1 SFELA10M7FA0G-B0 (in mm) (1) Center 3dB Bandwidth Frequency (fo) (kHz) (MHz) 3.01.0 3.01.0 (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 (3) 5.01.0 0.50.1 Part Number (in mm) 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (1) : Input (2) : Ground (3) : Output (1) (2) 7.02.0 EIAJ CODE SFELA10M7FALL-B0 3.01.0 (in mm) (1) (2) 7.02.0 10 SFELA10M7GA0G-B0 7.02.0 3.01.0 (3) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 SFELA10M7GALM-B0 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 7.02.0 Continued from the preceding page. (3) Insertion Spurious Loss Attenuation (dB) (dB) Attenuation (kHz) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) GDT Bandwidth (kHz) Input/Output Impedance (ohm) SFELA10M7JAXE-B0 10.700 30kHz 150 30kHz 500 max. 14.0 max. 35 min. fo50 min.[within 0.15sec.] 330 SFELA10M7HAXD-B0 10.700 30kHz 180 30kHz 530 max. 14.0 max. 33 min. fo60 min.[within 0.15sec.] 330 SFELA10M7HA0G-B0 10.700 30kHz 180 40kHz 520 max. 7.0 max. 40 min. fo45 min.[within 0.5sec.] 330 SFELA10M7GAXX-B0 10.700 30kHz 250 40kHz 670 max. 12.0 max. 25 min. fo110 min.[within 0.2sec.] 330 SFELA10M7GAXA-B0 10.700 30kHz 220 40kHz 610 max. 12.5 max. 30 min. fo80 min.[within 0.15sec.] 330 SFELA10M7GALP03-B0 10.700 30kHz 250 50kHz 650 max. 10.0 max. 30 min. fo65 min.[within 0.25sec.] 330 SFELA10M7GALM-B0 10.700 30kHz 230 50kHz 600 max. 9.0 2.0dB 30 min. fo60 min.[within 0.25sec.] 330 SFELA10M7GA0G-B0 10.700 30kHz 230 50kHz 600 max. 7.0 max. 40 min. fo60 min.[within 0.5sec.] 330 SFELA10M7FALL-B0 10.700 30kHz 280 50kHz 700 max. 7.0 2.0dB 25 min. fo70 min.[within 0.25sec.] 330 SFELA10M7FA0G-B0 10.700 30kHz 280 50kHz 650 max. 4.0 2.0dB 30 min. fo85 min.[within 0.5sec.] 330 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 32 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 10 5.00 0 4.50 1 4.75 1 4.25 2 4.50 2 4.00 3 4.25 3 3.75 4 4.00 4 3.50 5 3.75 5 3.25 6 3.50 6 3.00 3.25 7 0 6.00 0 3.25 1 5.50 1 3.00 2 5.00 2 2.75 3 4.50 3 2.50 4 4.00 4 2.25 5 3.50 5 2.00 6 3.00 6 1.75 2.50 7 0 3.75 0 3.75 1 3.50 1 3.50 2 3.25 2 3.25 3 3.00 3 3.00 4 2.75 4 2.75 5 2.50 5 2.50 6 2.25 6 2.25 2.00 7 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.500 10.600 10.700 Frequency (MHz) 10.800 10.800 10.900 2.75 10.600 10.700 Frequency (MHz) 10.800 10.900 1.50 10.900 Attenuation (dB) Attenuation (dB) SFELA10M7GALP03-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7GAXA-B0 7 10.700 Frequency (MHz) SFELA10M7GAXX-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7HA0G-B0 10.600 G.D.T. (sec.) 10.500 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) 7 Attenuation (dB) 0 G.D.T. (sec.) SFELA10M7HAXD-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7JAXE-B0 2.00 Continued on the following page. 33 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 6.00 1 3.75 1 5.50 2 3.50 2 5.00 3 3.25 3 4.50 4 3.00 4 4.00 5 2.75 5 3.50 6 2.50 6 3.00 2.25 7 0 3.25 0 5.00 1 3.00 1 4.50 2 2.75 2 4.00 3 2.50 3 3.50 4 2.25 4 3.00 5 2.00 5 2.50 6 1.75 6 2.00 1.50 7 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 0 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) SFELA10M7GA0G-B0 4.00 G.D.T. (sec.) Attenuation (dB) SFELA10M7GALM-B0 0 2.50 10 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) Attenuation (dB) SFELA10M7FA0G-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7FALL-B0 1.50 Frequency Characteristics (Spurious) SFELA10M7HAXD-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7JAXE-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.100 12.700 40 50 10.300 11.700 30 50 70 9.900 10.700 Frequency (MHz) SFELA10M7GAXX-B0 0 Attenuation (dB) Attenuation (dB) SFELA10M7HA0G-B0 9.700 11.500 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 34 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFELA10M7GALP03-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7GAXA-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 10 SFELA10M7GA0G-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7GALM-B0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELA10M7FA0G-B0 0 Attenuation (dB) Attenuation (dB) SFELA10M7FALL-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 35 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz High Selectivity Type SFTLA Series 10.01.0 SFTLA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE 0.40.1 Features 1.40.1 0.50.1 2.50.2 2.50.2 3.01.0 SFTLA10M7HA00-B0 0.30.1 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) 10.01.0 MARKING EIAJ CODE 6.01.0 1. It has an excellent shape factor, and it is possible to obtain 1.5 times more excellent selectivity than SFELA10M7 series (by detuning +-300 or 400kHz). 2. Good performance of spurious suppression 3. Having the same terminal pitch as the SFELA10M7 series, it easily replaces that series. 4. By replacing two SFELA10M7 series filters with one SFTLA10M7 filter, more compact sets can be made. 5. Well-suited for 1-chip ICs 5.01.0 0.650.1 0.40.1 5.01.0 0.650.1 1.40.1 0.50.1 3.01.0 SFTLA10M7GA00-B0 0.30.1 2.50.2 2.50.2 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) 10.01.0 EIAJ CODE 6.01.0 MARKING 0.40.1 5.01.0 0.650.1 1.40.1 0.50.1 2.50.2 2.50.2 3.01.0 SFTLA10M7FA00-B0 0.30.1 11 6.01.0 MARKING (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Input/Output Impedance (ohm) SFTLA10M7HA00-B0 10.700 30kHz 180 40kHz 510 max. 5.5 2.5dB 50 min. 330 SFTLA10M7GA00-B0 10.700 30kHz 230 40kHz 650 max. 6.0 2.0dB 50 min. 330 SFTLA10M7FA00-B0 10.700 30kHz 280 50kHz 700 max. 6.0 2.0dB 50 min. 330 Part Number Attenuation Bandwidth : at 40dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. (fn) means nominal center frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 36 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C 11 S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 7.00 1 7.50 1 6.50 2 7.00 2 6.00 3 6.50 3 5.50 4 6.00 4 5.00 5 5.50 5 4.50 6 5.00 6 4.00 4.50 7 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 0 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) SFTLA10M7GA00-B0 8.00 G.D.T. (sec.) Attenuation (dB) SFTLA10M7HA00-B0 0 3.50 6.00 1 5.50 2 5.00 3 4.50 4 4.00 5 3.50 6 3.00 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) Attenuation (dB) SFTLA10M7FA00-B0 0 2.50 37 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics (Spurious) SFTLA10M7GA00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFTLA10M7HA00-B0 0 30 40 50 60 60 9.700 10.700 Frequency (MHz) 11.700 12.700 SFTLA10M7FA00-B0 0 10 Attenuation (dB) 20 30 40 50 60 70 8.700 38 40 50 70 8.700 11 30 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr 10.7MHz Related Data on Lead Type Temperature Characteristics Variation (kHz) W20 SFELA10M7HA00-B0 Center frequency 0 Y20 W2 W1 Y20 0 W20 W40 Temperature (C) W60 W80 Insertion loss Variation (dB) Y40 0 Y1 Y2 W40 W20 Y20 0 W20 W40 Temperature (C) W60 W80 Variation (kHz) Variation (kHz) Variation (dB) Variation (kHz) SFELA10M7GA00-B0 W40 3dB Band width 0 Y20 Y40 Y20 0 W20 W40 Temperature (C) W60 W80 W40 W20 Center frequency 0 Y20 Y40 W2 W1 Y20 0 W20 W40 Temperature (C) W60 W80 0 W20 W40 Temperature (C) W60 W80 0 W20 W40 Temperature (C) W60 W80 Insertion loss 0 Y1 Y2 W40 W20 Y20 3dB Band width 0 Y20 Y40 Y20 11 Matching Conditions *When using ceramic filters, it is most important to match the input/output load to impedance 330 ohm (SFELA10M7DF00-B0 is 470 ohm and SFKLA10M7NL00-B0 is 600 ohm matching). Waveform symmetry is damaged when reactance is added to the input/output load. *Two ceramic filters directly connected can be used for high selelctivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic filters. *The SFELA10M7 and SFTLA10M7 series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic filters. Loaded Resistance and Waveform (Rg+R1=330ohm) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=1k 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) Attenuation (dB) R2=560 0 1 2 3 4 5 6 7 R2=330 Attenuation (dB) 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0 Group Delay Time (sec.) SFELA10M7GA00-B0 R2=220 0 1 2 3 4 5 6 7 Loaded Capacitance and Waveform (Rg+R1=R2=330ohm) Attenuation (dB) C=56pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=82pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=33pF Attenuation (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0 Group Delay Time (sec.) Attenuation (dB) 0 1 2 3 4 5 6 7 Group Delay Time (sec.) SFELA10M7GA00-B0 C=10pF 39 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 4.5-6.5MHz Chip Type SFSKA Series SMD ceramic filter SFSKA_CF is a small and thin SMD filter sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. 7.90.2 3.00.1 1.80.2 Features 0.50.1 8.50.2 1. High attenuation outside bandwidth 2. Small and thin pakage 3. Reflow-solderable 0.60.2 3.80.2 1.00.1 1.30.2 0.30.1 1.30.2 (1) (2) (3) (1) : Input (2) : Ground (3) : Output (in mm) 2.50.2 2.50.2 12 Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSKA4M50CF00-R1 4.500 fn60 min. 600 max. 6.0 max. 20 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 1000 Insertion Loss: at minimum loss point The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 1.0 1.0 1.5 Test Circuit (1) (2) (3) 1.0 1.5 (1) Input (2) Ground (3) Output R1 4.8 Rg E1 R2 C2 E2 RF Voltmeter S.S.G. R1+Rg=R2=1000 5%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1:S.S.G. Output voltage (in mm) Frequency Characteristics (Spurious) 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) Frequency Characteristics 30 40 50 60 40 50 60 70 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 40 30 4.9 5.1 5.3 5.5 0.0 2.0 4.0 6.0 Frequency (MHz) 8.0 10.0 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series 0.9 (Ref.) 2.50.2 2.50.2 4.0 max. 0.480.1 7.0 (Ref.) Features 1. Excellent spurious suppression characteristics within video signal band. 2. Available 4 pass bandwidth variation to meet various requests. 3. Low profile (H=7.0mm max.) 4. Lead dimension: Improved mounting reliability (cut & clinch) due to round terminal. 3.50.5 M 7.0 max. 10.0 max. As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter SFSRA series contains no lead (Pb). This series also features thickness shear mode same as SFSRH series (current type), which provides very low spurious response within video signal band. (3) (2) (1) 3--0.8 (1) : Input (2) : Ground (3) : Output (in mm) 13 Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSRA4M50CF00-B0 4.500 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRA4M50DF00-B0 4.500 fn70 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRA4M50EF00-B0 4.500 fn125 min. 850 max. 6.0 max. 25 min. [within 0 to fn] 18 min. [within fn to 7.0MHz] 1000 SFSRA5M50BF00-B0 5.500 fn50 min. 400 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA5M50CF00-B0 5.500 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to7.5MHz] 600 SFSRA5M50DF00-B0 5.500 fn80 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA5M74BF00-B0 5.742 fn50 min. 400 max. 8.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA5M74CF00-B0 5.742 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.5MHz] 600 SFSRA6M00CF00-B0 6.000 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.0MHz] 470 SFSRA6M00DF00-B0 6.000 fn80 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.0MHz] 470 SFSRA6M50CF00-B0 6.500 fn70 min. 650 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.5MHz] 470 SFSRA6M50DF00-B0 6.500 fn80 min. 800 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 8.5MHz] 470 Insertion Loss: at minimum loss point The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 41 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Test Circuit 1 2 3 R1 Rg S.S.G. R2 RF Voltmeter C Rg+R1=R2=Input and Output Impedance C=10pF (Including stray capacitance and input capacitance of RF voltmeter) Frequency Characteristics SFSRA4M50CF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 13 SFSRA4M50DF00-B0 0 30 40 30 40 50 50 60 60 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 70 3.5 5.5 3.7 3.9 0 10 10 20 20 30 40 50 60 3.9 54 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 5.5 70 4.5 4.7 4.9 10 10 20 20 30 40 60 60 5.1 5.3 5.5 5.7 Frequency (MHz) 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 6.5 40 50 4.9 5.5 30 50 4.7 5.3 SFSRA5M50DF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRA5M50CF00-B0 0 70 4.5 5.1 40 60 3.7 4.9 30 50 70 3.5 4.3 4.5 4.7 Frequency (MHz) SFSRA5M50BF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRA4M50EF00-B0 4.1 5.9 6.1 6.3 6.5 70 4.5 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 6.5 Continued on the following page. 42 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics SFSRA5M74BF00-B0 SFSRA5M74CF00-B0 0 0 10 10 20 Attenuation (dB) Attenuation (dB) 20 30 40 50 30 40 50 60 60 70 4.7 4.9 5.1 5.3 5.5 5.7 5.9 Frequency (MHz) 6.1 6.3 6.5 6.7 70 4.7 4.9 5.1 0 0 10 10 20 20 30 40 60 60 5.4 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 70 5.0 7.0 10 10 20 20 Attenuation (dB) Attenuation (dB) 0 30 40 5.2 5.4 60 60 6.3 6.5 6.7 Frequency (MHz) 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 7.0 7.1 7.3 7.5 40 50 6.1 5.6 30 50 5.9 6.7 SFSRA6M50DF00-B0 0 5.7 6.5 13 SFSRA6M50CF00-B0 70 5.5 6.3 40 50 5.2 6.1 30 50 70 5.0 5.5 5.7 5.9 Frequency (MHz) SFSRA6M00DF00-B0 Attenuation (dB) Attenuation (dB) SFSRA6M00CF00-B0 5.3 6.9 7.1 7.3 70 5.5 7.5 5.7 5.9 6.1 6.3 6.5 6.7 Frequency (MHz) 6.9 Frequency Characteristics (Spurious) SFSRA4M50DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA4M50CF00-B0 0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 Continued on the following page. 43 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFSRA5M50BF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA4M50EF00-B0 0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 SFSRA5M50CF00-B0 0 10 10 20 20 30 40 60 60 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 10 10 20 20 30 40 60 60 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 10 10 20 20 30 40 50 60 3.0 4.0 5.0 6.0 Frequency (MHz) 8.0 9.0 10.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 40 60 2.0 7.0 30 50 1.0 4.0 5.0 6.0 Frequency (MHz) SFSRA6M00DF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRA6M00CF00-B0 0 70 0.0 3.0 40 50 2.0 10.0 30 50 1.0 9.0 SFSRA5M74CF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRA5M74BF00-B0 0 70 0.0 8.0 40 50 1.0 7.0 30 50 70 0.0 4.0 5.0 6.0 Frequency (MHz) SFSRA5M50DF00-B0 0 Attenuation (dB) Attenuation (dB) 13 3.0 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) Continued on the following page. 44 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFSRA6M50DF00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA6M50CF00-B0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 13 45 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 3.5-6.5MHz Low Profile Type SFSRL Series SFSRL series are the Low-profile type of standard SFSRA series. Features 5.01.0 1.10.1 1. Installed height is 6.0mm, making it well suited for compact, thin sets. 2. Electrical char. and performance are the same as those of SFSRA series. 3. 2 types, narrow and middle bandwidth, are prepared. 2.5 0.2 2.5 0.2 4.0 max. 0.30.1 0.50.1 (3) 14 EIAJ CODE MARKING 6.0 max. 10.0 max. (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSRL4M50CF00-B0 4.500 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 1000 SFSRL4M50DF00-B0 4.500 fn70 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 5.7MHz] 1000 SFSRL5M50CF00-B0 5.500 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 600 SFSRL5M50DF00-B0 5.500 fn80 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 600 SFSRL6M00CF00-B0 6.000 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 7.5MHz] 470 SFSRL6M00DF00-B0 6.000 fn80 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 7.5MHz] 470 SFSRL6M50CF00-B0 6.500 fn70 min. 650 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 8.5MHz] 470 SFSRL6M50DF00-B0 6.500 fn80 min. 800 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 8.0MHz] 470 Insertion Loss: at minimum loss point The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 1 2 3 R1 Rg S.S.G. R2 Rg+R1=R2=Input and Output Impedance C=10pF (Including stray capacitance and input capacitance of RF voltmeter) 46 C RF Voltmeter P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics SFSRL4M50DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRL4M50CF00-B0 0 30 40 30 40 50 50 60 60 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Frequency (MHz) 4.9 5.1 5.3 70 3.5 5.5 3.7 3.9 10 10 20 20 30 40 60 60 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 70 4.5 6.5 10 20 20 Attenuation (dB) Attenuation (dB) 10 30 40 4.7 4.9 60 60 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 70 5.0 7.0 5.2 5.4 10 10 20 20 30 40 60 60 6.1 6.3 6.5 6.7 Frequency (MHz) 6.1 6.3 6.5 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 7.0 6.9 7.1 7.3 7.5 40 50 5.9 5.9 30 50 5.7 5.3 5.5 5.7 Frequency (MHz) SFSRL6M50DF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRL6M50CF00-B0 0 70 5.5 5.1 40 50 5.6 5.5 30 50 5.4 5.3 SFSRL6M00DF00-B0 0 5.2 5.1 14 SFSRL6M00CF00-B0 0 70 5.0 4.9 40 50 5.1 4.7 30 50 4.9 4.5 SFSRL5M50DF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRL5M50CF00-B0 4.7 4.3 Frequency (MHz) 0 70 4.5 4.1 6.9 7.1 7.3 7.5 70 5.5 5.7 5.9 6.1 6.3 6.5 6.7 Frequency (MHz) Continued on the following page. 47 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFSRL4M50DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRL4M50CF00-B0 0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 10 10 20 20 Attenuation (dB) Attenuation (dB) 0 30 40 60 60 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 10 10 20 20 30 40 60 60 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 10 10 20 20 30 40 60 60 48 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 40 50 2.0 4.0 5.0 6.0 Frequency (MHz) 30 50 1.0 3.0 SFSRL6M50DF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRL6M50CF00-B0 0 70 0.0 10.0 40 50 2.0 9.0 30 50 1.0 8.0 SFSRL6M00DF00-B0 0 Attenuation (dB) Attenuation (dB) SFSRL6M00CF00-B0 0 70 0.0 7.0 40 50 2.0 6.0 30 50 1.0 5.0 SFSRL5M50DF00-B0 0 70 0.0 4.0 Frequency (MHz) SFSRL5M50CF00-B0 14 3.0 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/L Series 0.480.1 1. Frequency adjustment free. 2. Responsible for VHS. 8mm VCR system. 0.9 (Ref.) 7.0 (Ref.) Features 3.50.5 M 7.0 max. 10.0 max. Chroma signals frequency conversion process is involved in VCRs video signal processing circuit. These SFSRA/SFSRH/SFSRL series are suitable for B.P.F. 4.0 max. 2.50.2 2.50.2 SFSRA Series (3) (2) (1) 3--0.8 (1) : Input (2) : Ground (3) : Output (in mm) EIAJ CODE MARKING 6.0 max. 10.0 max. 15 5.01.0 1.10.1 2.5 0.2 2.5 0.2 4.0 max. SFSRL Series 0.30.1 0.50.1 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) SFSRA4M43CF00-B0 4.430 fn60 min. 600 max. 6.0 max. 30 min. [within 0 to fn] 20 min. [within fn to 7.0MHz] 1000 SFSRL4M32DF00-B0 4.320 fn70 min. 750 max. 6.0 max. 30 min. [within 0 to fn] 15 min. [within fn to 5.5MHz] 1000 SFSRL5M17DF00-B0 5.170 fn70 min. 750 max. 7.5 max. 30 min. [within 0 to fn] 15 min. [within fn to 7.0MHz] 600 Insertion Loss: at minimum loss point The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 1 2 3 R1 Rg S.S.G. R2 C RF Voltmeter Rg+R1=R2=Input and Output Impedance C=10pF (Including stray capacitance and input capacitance of RF voltmeter) 49 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics SFSRL4M32DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA4M43CF00-B0 0 30 40 30 40 50 50 60 60 70 70 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 3.3 5.5 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 Frequency (MHz) Frequency (MHz) SFSRL5M17DF00-B0 0 10 Attenuation (dB) 20 15 30 40 50 60 70 4.2 4.4 4.6 4.8 5.0 5.2 5.4 Frequency (MHz) 5.6 5.8 6.0 6.2 Frequency Characteristics (Spurious) SFSRL4M32DF00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFSRA4M43CF00-B0 0 30 40 50 60 60 70 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 Frequency (MHz) SFSRL5M17DF00-B0 10 20 30 40 50 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 0 Attenuation (dB) 40 50 70 0.0 50 30 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz Chip Type PFWCC Series 1.20.2 1.20.2 (2) (3) (1) (4) 1.50.2 1.00.2 GND 5.00.3 IN 1.00.2 Input Mark PFWCC series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. This is the most recommendable for portable radio with small package. Especially, reflowable with SMD package. OUT GND 4.00.2 1.50.2 5.70.3 Features (in mm) 1. Center frequency range between 450 and 470 kHz are available standard tolerance of +-2 kHz. 2. For frequency synthesizers, center frequencies of 450, 459 and 468 kHz are available standard tolerance of +-1 kHz. Center 3dB Bandwidth Frequency (fo) (kHz) (kHz) Part Number PFWCC450KS2A-R0 450 2.0kHz 5.5 1.5kHz Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element 17 min.[fo+9kHz] 17 min.[fo-9kHz] 6.0 max. 3000 2 16 Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 6.0 1.5 6.0 4.0 1.2 1.2 (in:mm) The solder resist should be printed except for the land pattern on the P.C.B.. The material of P.C.B. is the epoxy resin of glass fabric base (t=0.8mm) 51 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Recommended IFT Type Winding Specification S(3) 5x5mm IFT 7x7mm IFT Item (1)--(2) (2)--(3) (4)--(6) (1)--(2) (2)--(3) (4)--(6) 85T 67T 23T 84T 98T 33T (4)S (2) (1) (6) (Bottom view) No load Qu 90 65 Tuning Capacitance 180pF 180pF * Maching of CERAFILrPFWLA series with IFT is decided by the IFT secondary side impedance, |Z2|. Set the |Z2| at about 4.2k. Test Circuit (CERAFILr Only) Test Circuit (CERAFILr with IFT) 7pF (1) (2) IFT (4) (3) RF Voltmeter 3k S.S.G. (Rg=50) 300k (3) (1) (2) (4) (3) (4) (2) S.S.G. (Rg=50) (1) 3k 3k RF Voltmeter (6) 16 Frequency Characteristics Frequency Characteristics (Spurious) IFT+PFWCC450KS2A-R0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+PFWCC450KS2A-R0 0 30 40 40 50 50 60 60 70 70 430 440 450 Frequency (kHz) 52 30 460 470 0.000 1.000 2.000 Frequency (kHz) 3.000 4.000 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz Chip Type SFPCA Series 7.50.3 SFPCA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. 8.4max. 7.00.3 3.00.3 MARKING EIAJ CODE 5.0max. 0.90.1 2.00.3 1.50.3 2.00.3 Features 1.60.3 Connection (1) : Input (2) : Ground (3) : Output (1) (2) (3) 1. The filters are mountable by automatic placers and can be reflow soldered and withstand washing. 2. The filters are wide bandwidth and high selectivity. So they are suitable for car radio and multi band radio. (in mm) Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) SFPCA450KH1A-R1 450 1.0kHz fn3.0 min. SFPCA450KG1A-R1 450 1.0kHz fn4.5 min. SFPCA450KF4A-R1 450 1.5kHz fn6.0 min. 40 min.[fn+12.5kHz] Part Number 1.50.3 Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element 40 min.[fn+9kHz] 40 min.[fn-9kHz] 6.0 max. 2000 4 40 min.[fn+10kHz] 40 min.[fn-10kHz] 6.0 max. 1500 4 40 min.[fn-12.5kHz] 6.0 max. 1500 4 Selectivity (+) (dB) 17 Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 6.95 2.0 1.1 0.925 2.0 2.0 0.9 1.55 7.45 1.6 2.475 0.8 Standard Land Pattern Dimensions (in mm) 53 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Recommended IFT Test Circuit Type SFPCA Item Winding Specification (1)--(2) (2)--(3) (4)--(6) R1 S(3) (4)S (2) (3) (1) (2) (1) (6) 60T 125T 28T Rg (Bottom view) No load Qu R2 E1 RF Voltmeter Connection E2 S.S.G. 0dBm 40 (1):Input (2):Ground Tuning Capacitance 180pF (3):Output * Matching of CERAFILrSFPCA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Rg+R1=R2=Input/Output Impedance Frequency Characteristics 17 400 10 360 10 360 20 320 20 320 30 280 30 280 40 240 40 240 50 200 50 200 60 160 60 160 70 120 70 120 80 80 80 80 90 40 90 40 0 100 100 425 450 475 Frequency (kHz) 400 10 360 20 320 30 280 40 240 50 200 60 160 70 120 80 80 90 40 450 Frequency (kHz) 54 475 0 G.D.T. (sec.) Attenuation (dB) SFPCA450KF4A-R1 425 425 450 Frequency (kHz) 0 100 Attenuation (dB) 0 475 0 G.D.T. (sec.) SFPCA450KG1A-R1 400 G.D.T. (sec.) Attenuation (dB) SFPCA450KH1A-R1 0 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz SFULA/SFZLA Series 3.50.3 7.00.3 SFULA/SFZLA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. 9.00.3 MARKING +1.0 3.5 -0.5 EIAJ CODE 1.10.1 Features 0.25 0.80.1 1. Center frequency range between 450 to 470 kHz are available standard tolerance of +-2 kHz. 2. For frequency synthesizers, center frequencies of 450, 459 and 468 kHz are available standard tolerance of +-1 kHz. 0.1 (3) 1.750.5 SFULA Series Connection (1) : Input (2) : Ground (3) : Output (in mm) (2) (1) 2.50.2 2.50.2 7.00.5 7.00.3 EIAJ +1.0 3.5 -0.5 CODE 9.00.3 MARKING 1.10.1 0.25 0.1 SFZLA Series (1) (2) (3) (6) (5) (4) 2.50.2 2.50.2 Part Number Center 3dB Bandwidth Frequency (fo) (kHz) (kHz) 3.5 1.75 0.5 0.5 0.80.1 Connection (1) : Input (2)(5) : Ground (3)(4) : Direct connection (6) : Output (in mm) Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element SFULA455KU2A-B0 455 2.0kHz 10.0 3.0kHz 4 min.[fo+10kHz] 6 min.[fo-10kHz] 5.0 max. 3000 1 SFULA455KU2B-B0 462 2.0kHz 10.0 3.0kHz 4 min.[fo+10kHz] 6 min.[fo-10kHz] 5.0 max. 3000 1 SFZLA455KN2A-B0 455.5 2.0kHz 4.0 1.0kHz 23 min.[fo+9kHz] 23 min.[fo-9kHz] 7.0 max. 3000 2 SFZLA455KS2A-B0 456 2.0kHz 5.5 1.0kHz 18 min.[fo+9kHz] 18 min.[fo-9kHz] 7.0 max. 3000 2 SFZLA455KT2A-B0 456 2.0kHz 7.0 1.0kHz 16 min.[fo+9kHz] 16 min.[fo-9kHz] 6.0 max. 3000 2 Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Frequency Characteristics (CERAFILr with IFT) Selectivity 6dB Band Width (kHz) +9kHz off (dB) IFT+SFULA455KU2B-B0 6.5 20 IFT+SFZLA455KN2A-B0 5.0 38 78 IFT+SFZLA455KS2A-B0 7.0 33 78 IFT+SFZLA455KT2A-B0 8.5 27 78 Part Number -9kHz off (dB) Input Level (at 0.6mV output) (dB) 23 78 Typ. value 55 18 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Recommended IFT (7x7) Type Winding Specification S(3) SFZLApL SFULApL Item (1)--(2) (2)--(3) (4)--(6) (1)--(2) (2)--(3) (4)--(6) 70T 115T 7T 68T 84T 14T (4)S (2) (1) (6) (Bottom view) No load Qu 105 90 Tuning Capacitance 180pF 180pF * Maching of CERAFILrSFULA/SFZLA series with IFT is decided by the IFT secondary side impedance, |Z2|. The design target values of |Z2| are : For SFULApL : 300 For SFZLApL : 1k Test Circuit (CERAFILr Only) SFULA Series 3k (1) SFZLA Series (3) 3k (2) RF Voltmeter (4) (2) (5) (1) (6) S.S.G. (Rg=50) 3k 3k S.S.G. (Rg=50) (3) RF Voltmeter 18 Test Circuit (CERAFILr with IFT) SFULA Series SFZLA Series 7pF 7pF (1) IFT (1) 56 (4) (2) (6) (4) (2) (5) IFT (2) 300k RF Voltmeter S.S.G. (Rg=50) (3) (1) (6) (4) (2) (1) 3k S.S.G. (Rg=50) (3) 3k 300k (3) (3) (6) RF Voltmeter P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Frequency Characteristics IFT+SFZLA455KN2A-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+SFULA455KU2B-B0 0 30 40 30 40 50 50 60 60 70 70 435 445 455 465 475 435 445 455 Frequency (kHz) IFT+SFZLA455KS2A-B0 475 465 475 IFT+SFZLA455KT2A-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) 465 Frequency (kHz) 30 40 30 40 50 50 60 60 70 70 435 445 455 465 475 435 445 455 Frequency (kHz) Frequency (kHz) 18 Frequency Characteristics (Spurious) IFT+SFZLA Series 0 10 10 20 20 30 30 Attennation (dB) Attennation (dB) IFT+SFULA455KU2B-B0 0 40 50 40 50 60 60 70 70 80 0 1 2 3 4 5 6 Frequency (MHz) 7 8 9 10 80 0 1 2 3 4 5 6 7 8 9 10 Frequency (MHz) 57 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz PFSLA/PFWLA Series PFSLA/PFWLA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. This is the most recommendable for portable radios with small package. 5.01.0 6.01.0 5.01.0 1.40.1 1.40.1 0.50.1 3.01.0 0.30.1 PFSLA Series Marking : 2.50.2 2.50.2 Features (3) 1. Center frequency range between 450 to 470 kHz are available standard tolerance of +-2 kHz. 2. For frequency synthesizers, center frequencies of 450, 459 and 468 kHz are available standard tolerance of +-1 kHz. (2) (1) Input (2) Ground (3) Output : EIAJ Monthly Code (in mm) (1) 6.2 max. 6.01.0 5.01.0 1.40.1 1.40.1 PFWLA Series (3) (2) Marking : (1) Input (2) Ground (3) Output 2.50.2 2.50.2 3.01.0 0.30.1 0.50.1 : Vender's Code : EIAJ monthly Code (1) (in mm) 19 Part Number Center 3dB Bandwidth Frequency (fo) (kHz) (kHz) Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element PFSLA455KP2A-B0 455 2.0kHz 4.5 1.5kHz 8 min.[fo+9kHz] 8 min.[fo-9kHz] 5.0 max. 3000 1 PFWLA450KP2A-B0 450 2.0kHz 4.5 1.5kHz 19 min.[fo+9kHz] 19 min.[fo-9kHz] 7.0 max. 3000 2 PFWLA450KS2A-B0 450 2.0kHz 5.5 1.5kHz 17 min.[fo+9kHz] 17 min.[fo-9kHz] 6.0 max. 3000 2 Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 58 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Recommended IFT Type Winding Specification S(3) 5x5mm IFT 7x7mm IFT Item (1)--(2) (2)--(3) (4)--(6) (1)--(2) (2)--(3) (4)--(6) 85T 67T 23T 84T 98T 33T (4)S (2) (1) (6) (Bottom view) No load Qu 90 65 Tuning Capacitance 180pF 180pF * Maching of CERAFILrPFWLA series with IFT is decided by the IFT secondary side impedance, |Z2|. Set the |Z2| at about 4.2k. Test Circuit (CERAFILr Only) Test Circuit (CERAFILr with IFT) PFSLA/PFWLA Series PFSLA/PFWLA Series 7pF 3k (1) (3) (1) (3) IFT 300k (2) (4) (2) (3) (2) S.S.G. (Rg=50) 3k RF Voltmeter 3k S.S.G. (Rg=50) (1) RF Voltmeter (6) Frequency Characteristics 19 IFT+PFWLA450KS2A-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+PFSLA455KP2A-B0 30 40 30 40 50 50 60 60 70 70 435 445 455 465 475 430 440 Frequency (kHz) 450 460 470 3.000 4.000 Frequency (kHz) Frequency Characteristics (Spurious) IFT+PFWLA450KS2A-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) IFT+PFSLA455KP2A-B0 0 30 40 30 40 50 50 60 60 70 0.000 1.000 2.000 Frequency (kHz) 3.000 4.000 70 0.000 1.000 2.000 Frequency (kHz) 59 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz SFPLA/CFWLA Series MARKING SFPLA/CFWLA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. This is the most recommendable for car-stereo and all band radio with high attenuation. 7.30.3 EIAJ CODE 2.70.3 (1) (3) SFPLA Series 0.60.1 1.20.5 Connection (1) : Input (2) : Ground (3) : Output 4.20.3 (2) 0.80.1 3.00.3 1.5max. 0.150.05 0.30.1 Features 7.00.3 8.00.3 (in mm) 3.30.5 11.00.5 7.50.5 EIAJ CODE 3.50.5 0.15 2.90.3 0.80.1 20 (2) (1) (5) 4.30.3 1.350.5 2.30.5 (4) (3) 0.60.1 2.60.3 2.90.3 2.9 2.9-- --0.3 1.20.5 CFWLA Series 1.5max. 7.00.5 MARKING Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element SFPLA450KJ1A-B0 450 1.0kHz fn2.0 min. 40 min.[fn+7.5kHz] 40 min.[fn-7.5kHz] 6.0 max. 2000 4 SFPLA450KH1A-B0 450 1.0kHz fn3.0 min. 40 min.[fn+9kHz] 40 min.[fn-9kHz] 6.0 max. 2000 4 CFWLA450KJFA-B0 450 (fn) fn2.0 min. 50 min.[fn+7.5kHz] 50 min.[fn-7.5kHz] 7.0 max. 2000 6 CFWLA450KHFA-B0 450 (fn) fn3.0 min. 50 min.[fn+9kHz] 50 min.[fn-9kHz] 6.0 max. 2000 6 Part Number Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Recommended IFT (7x7) Type SFPLA/CFULA/CFWLA Item Winding Specification S(3) Test Circuit (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T R1 (4)S Input Output Rg (2) (1) (6) RF R2 SSG (Bottom view) No load Qu 40 Tuning Capacitance 180pF * Matching of CERAFILrSFPLA/CFULA/CFWLA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Voltmeter Ground Rg+R1 =R2 : Input/Output Impedance Continued on the following page. 60 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics IFT+CFWLA450KHFA-B0 0 10 10 20 20 Attennation (dB) Attenuation (dB) IFT+SFPLA450KH1A-B0 0 30 40 30 40 50 50 60 60 70 430 440 450 460 470 70 430 440 450 Frequency (kHz) Frequency (kHz) 460 470 Frequency Characteristics (Spurious) IFT+CFWLA450KHFA-B0 0 10 10 20 20 Attennation (dB) Attennation (dB) IFT+SFPLA450KH1A-B0 0 30 40 50 30 40 50 60 60 70 70 80 0 1 2 3 4 5 6 Frequency (kHz) 7 8 9 10 80 0 1 2 3 4 5 6 Frequency (kHz) 7 8 9 10 20 61 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series MARKING 7.30.3 EIAJ CODE 2.70.3 (2) (3) SFPLA Series 21 2.00.3 Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) 3.00.3 (2) CFULA Series (in mm) (1) (3) 1.20.5 0.60.1 Connection (1) : Input (2) : Ground (3) : Output in mm 3.30.5 Selectivity (+) (dB) Selectivity (-) (dB) Insertion Loss (dB) 30 min.[fn+9kHz] 30 min.[fn-9kHz] 0.30.1 7.30.3 2.70.3 Connection (1) : Input (2)(3)(4) : Ground (5) : Output 3.00.3 1.5max. 0.60.1 0.80.1 4.20.3 (1) 4.30.3 1.350.5 2.30.5 Part Number 1.5max. 0.150.05 1.20.5 7.00.3 7.00.5 0.80.1 2.60.3 2.90.3 2.9 2.9-- --0.3 (2) (in mm) EIAJ CODE 3.50.5 0.15 (5) Connection (1) : Input (2) : Ground (3) : Output 3.30.5 MARKING 7.50.5 EIAJ CODE (4) (3) 0.60.1 1.20.5 8.00.3 MARKING CFWLA Series (1) 0.80.1 4.20.3 0.150.05 11.00.5 2.90.3 1.5max. SFPLA/CFWLA/CFULA series for AM use is one of the most recommendable intermediate filters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally its easy matching with IC helps create an easy circuit design. Especially, CFULA/CFWLA_Y series is the frequency fidelity in the high sound area of an AM stereo will be improved with wide band, flat group delay time characteristics. 0.30.1 Features 7.00.3 8.00.3 GDT 20sec. Input/Output Bandwidth Impedance Element (kHz) (ohm) SFPLA450KG1A-B0 450 1.0kHz fn4.5 min. 6.0 max. - 2000 4 SFPLA450KF1A-B0 450 1.0kHz fn6.0 min. 40 min.[fn+12.5kHz] 40 min.[fn-12.5kHz] 6.0 max. - 2000 4 SFPLA450KE1A-B0 450 1.0kHz fn7.5 min. 40 min.[fn+15kHz] 40 min.[fn-15kHz] 6.0 max. - 1500 4 SFPLA450KD1A-B0 450 1.0kHz fn10.0 min. 40 min.[fn+20kHz] 40 min.[fn-20kHz] 4.0 max. - 1500 4 CFWLA450KGFA-B0 450 (fn) fn4.5 min. 50 min.[fn+10kHz] 50 min.[fn-10kHz] 6.0 max. - 2000 6 CFWLA450KFFA-B0 450 (fn) fn6.0 min. 50 min.[fn+12.5kHz] 50 min.[fn-12.5kHz] 6.0 max. - 2000 6 CFWLA450KEFA-B0 450 (fn) fn7.5 min. 50 min.[fn+15kHz] 50 min.[fn-15kHz] 6.0 max. - 1500 6 CFWLA450KDFA-B0 450 (fn) fn10.0 min. 50 min.[fn+20kHz] 50 min.[fn-20kHz] 4.0 max. - 1500 6 CFWLA450KG1Y-B0 450 1.0kHz fn4.5 min. 50 min.[fn+15kHz] 50 min.[fn-15kHz] 11.0 max. fn4.0 2000 6 CFULA450KG1Y-B0 450 1.0kHz fn4.5 min. 40 min.[fn+15kHz] 40 min.[fn-15kHz] 10.0 max. fn4.5 2000 4 CFWLA450KF1Y-B0 450 1.0kHz fn6.0 min. 50 min.[fn+17.5kHz] 50 min.[fn-17.5kHz] 10.0 max. fn5.0 2000 6 CFULA450KF1Y-B0 450 1.0kHz fn6.0 min. 40 min.[fn+17.5kHz] 40 min.[fn-17.5kHz] 9.0 max. fn6.0 2000 4 CFWLA450KD1Y-B0 450 1.0kHz fn10.0 min. 50 min.[fn+25kHz] 50 min.[fn-25kHz] 8.0 max. fn8.0 1500 6 450 1.0kHz fn10.0 min. 40 min.[fn+25kHz] 40 min.[fn-25kHz] 7.0 max. fn9.0 1500 4 CFULA450KD1Y-B0 Insertion Loss: at minimum loss point Center frequency (fo) is defined by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 62 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Recommended IFT (7x7) Type SFPLA/CFULA/CFWLA Item Winding Specification S(3) Test Circuit (1)--(2) (2)--(3) (4)--(6) 60T 125T 28T Input R1 (4)S Output Rg (2) (1) (6) RF R2 SSG (Bottom view) No load Qu 40 Tuning Capacitance 180pF Voltmeter Ground * Matching of CERAFILrSFPLA/CFULA/CFWLA series with IFT is decided by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because a Qu value which is too high (e.g.,90) may produce ripple in the waveform. It is recommended to match the impedance of |Z2| with that of the CERAFILr. Rg+R1 =R2 : Input/Output Impedance Frequency Characteristics IFT+CFWLA450KFFA-B0 0 10 10 20 20 Attennation (dB) Attenuation (dB) IFT+SFPLA450KF1A-B0 0 30 40 50 30 40 50 60 60 70 440 450 460 70 430 470 440 Frequency (kHz) 460 470 IFT+CFWLA450KF1Y-B0 10 10 20 200 30 100 40 0 50 60 Attennation (dB) 0 Group Delay Time (sec.) Attennation (dB) IFT+CFULA450KF1Y-B0 0 70 430 450 Frequency (kHz) 21 20 200 30 100 40 0 50 Group Delay Time (sec.) 430 60 440 450 Frequency (kHz) 460 470 70 430 440 450 460 470 Frequency (kHz) 63 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment 3.50.3 CERAFILr 455kHz for Search-stop Signal Detection BFULA series are narrow bandwidth filters. This filter is used in the application which detects the carrier peak with a narrow bandwidth amplifier, or an electronic tuner as a stop signal detector. 1.5max. MARKING 9.00.3 7.00.3 EIAJ CODE Most suitable for IC Station Detectors (SD). 3.50.5 Features No directivity 1.750.5 0.10.05 0.250.05 0.80.1 1.10.1 5.00.2 (in mm) Resonant Frequency (Fr) (kHz) Delta F (Fa-Fr) (kHz) Resonant Resistance (ohm) Capacitance (pF) BFULA450KC-B0 450 1.0kHz 14.0 2.0kHz 20 max. 360 20% BFULA450KC004-B0 450 0.8kHz 9.0 2.0kHz 30 max. 360 20% BFULA450KK003-B0 450 1.0kHz 27.5 4.5kHz 30 max. 550 20% Part Number fa-fr means difference between the anti-resonant frequency and the resonant frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Impedance Characteristics BFULA450KC004-B0 500k 100k 50k 10k 22 Impedance (ohm) 5k 1k 500 100 50 10 5 1 445 64 450 455 Frequency (kHz) 460 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr 455kHz SF/PF Series Temperature Characteristics SFPLA450KH1A-B0 +1 Temperature (D) 20 40 60 80 0 -20 0 -1 Center Frequency (kHz) Center Frequency (kHz) SFZLA455KS2A-B0 40 0 -20 60 80 Temperature (D) 0 -1 +1 Temperature (D) 20 40 60 80 0 -20 0 -1 Insertion Los (dB) 20 0 20 40 0 20 40 60 80 -1 0 60 80 Temperature (D) -20 -1 3dB Band Width (kHz) Insertion Los (dB) Temperature (D) -20 0 +1 +1 3dB Band Width (kHz) +1 +1 Temperature (D) 20 40 60 80 0 -20 0 -1 Insertion Los (dB) Center Frequency (kHz) PFWLA450KS2A-B0 +1 20 40 -20 80 0 Temperature (D) -1 +1 40 60 0 -20 0 80 20 Temperature (D) -1 3dB Band Width (kHz) 60 0 +1 -20 0 0 -1 20 40 60 80 Temperature (D) 22 65 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr 455kHz SF/PF/BF Series Application Circuit Car Radio SFPLA450KH1A-B0/BFULA450KC004-B0 10 220p 4.7 3k 2200p 22 33p 10 16 18 1 0.01 CF1 3 5 7 9 11 13 15 17 100k 100k 2SK315 PFWLA450KS2A-B0 CF1: PFWLA450KS1A-B0 SFZLA450KS1A-B0 SFPLA450KH1A-B0 19 1 10k 9 14 3.3 8 7 47 6 0.022 5 0.01 12 100 22 0.022 100k 51 0.047 x2 100H 3.3mH 4 0.022 0.022 + 0.022 3 10 PC1216V2 (NEC) 75 2 1 0.022 1 ANT 8 0.022 11 6 22 12 0.033 51p 13 LA1135(SANYO) 4 PFSLA455KP2A-B0 560p 14 0.033 0.01 3.3 15 100p 2 22 16 120 4.7H AF Out 4.7k 17 2.7k 3300p 100 82 7.5k 18 + 10k + 0.47 Ant Input 0.022 100 19 0.047 0.047 20 10k 4.7 430P Vtune 100k PFSLA455KP2A-B0/PFWLA450KS2A-B0 BFULA450KC004-B0 CF2 Vco(+8v) Station Det Out 100 Unit R: C:F L:H Det. Output Vcc (+13V) Unit R: C:F L:H Portable Radio SFULA455KU2B-B0 FM PF FM OSC FM CERAFIL(R) CERAMIC DISCRIMINATOR (SFELA10M7FA00-B0) (CDALA10M7CA001-B0) + R IF OUT 9 FM BPF 12 AM ANT 13 7 6 FM FRONT END 2 14 17 FM/AM BAND SELECT + FM IF IN FM DISCRI FM IF AMP DETECTOR 19 METER 25 26 RIPPLE FILTER TUNING METER 15 Vcc REGULATOR 8 REG OUT + 28 1 CXA1019M (SONY) 10 AM FRONT END AM IF AMP DETECTOR VOL AGC AMP AM IF IN 11 5 18 20 16 22 AM OSC + AF PRE/POWER AMP 23 DEP OUT 21 4 24 AF IN 27 + SP 3 + + + 22 AM CERAFIL(R) (SFULA455KU2B-B0) VOL Unit R: C:F L:H Continued on the following page. 66 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr 455kHz SF/PF/BF Series Application Circuit Continued from the preceding page. Portable Radio SFULA455KU2B-B0 24 23 FM OSC 22 DEF OUT 21 20 19 FM OSC AM OSC AF AM MIX AM RF 1 2 FM MIX 3 AM AGC AM MIX 4 AM AGC + 33 GND1 BPF 5 - MPX IN 18 AM IF IN 15 Phase COM Phase COM VCO FM IF IN FM IF 8 FM DET 9 GND2 TUN LED 10 TUN LED 14 OUT R L R 4.7 13 ST DECODER Freq Divider HYS TA8122AN (TOSHIBA) SW ST LED 11 12 ST LED QUAD 0.033 560 10 0.015 0.1 16 L DET 7 OUT L 17 T2 0.022 VCO AM/FM MONO SW AM IF 6 Vcc2 LPF2 4.7 + + - - LPF1 PRE AM DET AM MIX FM RF FM RF IN AM OSC AM + SFULA455 SFELA10 KU2B-B0 M7FA00-B0 CDALA10 M7GA16-B0 + - 22 OUT Vcc1 MO - + 560 AM PF IN FM PF + FM 0.015 10 15p ST 22k T1 CSBLA456 KE2ZF16-B0 0.1 100k 8p 0.022 33k 5p L2 22p L1 20p L3 100k 330p IS2236 Vcc (3V) Unit R: C:F L:H In Tr Circuit BFULA450KK003-B0 15k 3k +6V 0.01 0.01 3k 1k 1mA S.S.G. (10mV) 5k 22 BFULA 450KK003-B0 RF Volt meter Unit R: C:F L:H 67 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series SMD ceramic trap TPSKA_B is small and thin SMD trap sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. 7.90.2 3.00.1 1.80.2 Features 0.50.1 8.50.2 1. High attenuation and high performance group delay time 2. Small and thin pakage 3. Reflow-solderable 0.60.2 3.80.2 1.00.1 1.30.2 0.30.1 (1) : Input (2) : Ground (3) : Output 1.30.2 (1) (2) (3) (in mm) 2.50.2 2.50.2 Part Number Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) 4.500 35 min. 50 min. TPSKA4M50B00-R1 The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions Test Circuit L 1.0 1.0 1.5 1.0 R1 1.5 Rg 4.8 50 R2 RF Voltmeter S.S.G. Rg=50 R1=330 R2=1.0k 23 0 0 700 10 10 600 20 30 40 50 60 20 500 30 400 40 300 50 200 60 100 70 0 80 70 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 68 4.7 4.8 4.9 5.0 0 1.0 2.0 3.0 Frequency (MHz) 4.0 5.0 G.D.T. (nsec) Frequency Characteristics (Spurious) Attenuation (dB) Attenuation (dB) Frequency Characteristics L=15H P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series 7.90.2 4.20.1 1.50.2 M 0.40.1 SMD ceramic trap TPWKA is small and thin SMD trap sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. This series consist of 2 wafers with 2 trap frequencies. Recommended for Multi standard set. 1.00.1 Features 1. Good performance of attenuation 2. Small and thin package 3. Reflow-solderable 5.00.2 1.30.2 8.50.2 0.40.2 (1) (2) (3) 2.50.2 2.50.2 1.30.2 0.30.1 (1) : Input or Output (2) : Ground (3) : Output or Input (in mm) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) 30dB Attenuation BW (fn1) (kHz) TPWKA5M50B04-R1 5.500 5.742 30 min. 30 min. 50 min. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Land Pattern Dimensions 1.2 1.2 1.2 L 1.3 R1 1.9 1.3 Test Circuit Rg R2 50 C2 RF Voltmeter 5.8 S.S.G. 1.9 L = 8.2 H Rg = 50 R1 = 150 R2 = 330 C2 = 10pF (Including stray capacitance and input capacitance of RF voltmeter) (in mm) 24 0 0 10 10 800 20 600 30 400 40 200 50 50 0 60 60 20 30 40 70 4.5 70 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 6.5 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 G.D.T.(nesc) Frequency Characteristics (Spurious) Attenuation (dB) Attenuation (dB) Frequency Characteristics 10.0 69 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series M Features 1. Good performance of attenuation 2. Shape factor can be changed by the value of Inductor "L". 3. Three-terminals type 4. Low profile (H=7.0mm max.) 5. Lead dimension: Improved mounting reliability (cut & clinch) due to round terminal. 0.9 (Ref.) 2.50.2 2.50.2 4.0 max. 0.480.1 7.0 (Ref.) 3.50.5 As part of the environment protection activity, solder for terminal plating and terminal-element connection inside of ceramic filter TPSRA series contain no lead (Pb). This series consist of two trap element on one wafer. Suitable for the sound IF trap of CTV/VCR. 7.0 max. 10.0 max. 3--0.8 (3) (2) (1) Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) TPSRA4M50B00-B0 4.500 35 min. 50 min. TPSRA4M50C00-B0 4.500 30 min. - TPSRA5M50B00-B0 5.500 35 min. 70 min. TPSRA5M74B00-B0 5.742 35 min. 70 min. TPSRA6M00B00-B0 6.000 35 min. 70 min. TPSRA6M50B00-B0 6.500 35 min. 70 min. Part Number (1) : Input (2) : Ground (3) : Output (in mm) The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit TPSRA4M50B00-B0 TPSRA4M50C00-B0 15H 8.2H 330ohm 25 220ohm Rg=50ohm S.S.G. 1kohm R.F. Voltmeter 50ohm 2.2Kohm S.S.G. 50ohm Rg=50ohm R.F. Voltmeter Continued on the following page. 70 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit TPSRA5M50/5M74/6M00/6M50B00-B0 15H 220ohm S.S.G. R.F. Voltmeter 1Kohm 50ohm Rg=50ohm Frequency Characteristics TPSRA4M50C00-B0 0 10 Attenuation (dB) 0 10 20 30 40 20 30 40 50 50 60 60 70 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 4.7 4.8 4.9 70 4.0 5.0 4.1 4.2 4.3 0 0 10 10 20 30 40 60 5.3 5.4 5.5 5.6 Frequency (MHz) 5.7 5.8 5.9 70 5.2 6.0 5.4 0 10 Attenuation (dB) 0 20 30 40 6.0 6.1 6.2 6.7 6.8 6.9 7.0 40 60 60 5.9 6.0 6.1 Frequency (MHz) 5.9 30 50 5.8 5.6 5.7 5.8 Frequency (MHz) 20 50 5.7 5.5 TPSRA6M50B00-B0 10 5.6 5.0 25 5.3 TPSRA6M00B00-B0 70 5.5 4.9 40 60 5.2 4.8 30 50 5.1 4.7 20 50 70 5.0 4.4 4.5 4.6 Frequency (MHz) TPSRA5M74B00-B0 Attenuation (dB) Attenuation (dB) TPSRA5M50B00-B0 Attenuation (dB) Attenuation (dB) TPSRA4M50B00-B0 6.2 6.3 6.4 6.5 70 6.0 6.1 6.2 6.3 6.4 6.5 6.6 Frequency (MHz) Continued on the following page. 71 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) TPSRA4M50B00-B0 TPSRA4M50C00-B0 600 30 400 40 200 50 0 60 800 20 600 30 400 40 200 50 0 60 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 10.0 0 1.0 2.0 TPSRA5M50B00-B0 400 40 200 50 0 10.0 10 800 20 600 30 400 40 200 50 0 70 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 0 1.0 2.0 TPSRA6M00B00-B0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 TPSRA6M50B00-B0 0 0 20 600 30 400 40 200 50 0 Attenuation (dB) 800 G.D.T.(nesc) 10 Attenuation (dB) 9.0 60 60 10 800 20 600 30 400 40 200 50 0 60 60 72 8.0 G.D.T.(nesc) 30 Attenuation (dB) 600 G.D.T.(nesc) Attenuation (dB) 800 20 70 7.0 0 0 25 4.0 5.0 6.0 Frequency (MHz) TPSRA5M74B00-B0 10 70 3.0 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 G.D.T.(nesc) 70 10 G.D.T.(nesc) 20 Attenuation (dB) 0 800 G.D.T.(nesc) Attenuation (dB) 0 10 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRD Series 10.0 max. T J 10.0 max. Ceramic Trap TPSRD_J series are two-terminals type. Which are recommended for the attenuation of sound IF in B/W TV and the attenuation of chroma signal in Video Camcorder. EIAJ CODE 1. Small-size, lightweight 2. High performance, durability 3. Easy to design due to two-terminals type 5.01.0 1.380.2 Features 5.00.2 5.0 max. 0.30.1 0.50.1 Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) TPSRD3M58J00-B0 3.580 20 min. 20 min.[20dB Att.BW] TPSRD4M43J00-B0 4.430 20 min. 40 min.[20dB Att.BW] TPSRD4M50J00-B0 4.500 20 min. 30 min.[20dB Att.BW] TPSRD5M50J00-B0 5.500 20 min. 30 min.[20dB Att.BW] TPSRD6M00J00-B0 6.000 20 min. 40 min.[20dB Att.BW] TPSRD6M50J00-B0 6.500 20 min. 40 min.[20dB Att.BW] Part Number in mm The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 75 1K 50 Rg=50 R.F. Voltmeter Ceramic Trap S.S.G. 26 Frequency Characteristics TPSRD4M43J00-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPSRD3M58J00-B0 0 30 40 30 40 50 50 60 60 70 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (MHz) 3.8 3.9 4.0 4.1 70 3.9 4.0 4.1 4.2 4.3 4.4 4.5 Frequency (MHz) 4.6 4.7 4.8 4.9 Continued on the following page. 73 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics TPSRD5M50J00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPSRD4M50J00-B0 30 40 30 40 50 50 60 60 70 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Frequency (MHz) 4.7 4.8 4.9 70 5.0 5.0 5.1 5.2 0 0 10 10 20 20 30 40 60 60 5.7 5.8 5.9 6.0 6.1 Frequency (MHz) 5.8 5.9 6.0 6.7 6.8 6.9 7.0 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 40 50 5.6 5.7 30 50 70 5.5 5.4 5.5 5.6 Frequency (MHz) TPSRD6M50J00-B0 Attenuation (dB) Attenuation (dB) TPSRD6M00J00-B0 5.3 6.2 6.3 6.4 70 6.0 6.5 6.1 6.2 6.3 6.4 6.5 6.6 Frequency (MHz) Frequency Characteristics (Spurious) 0 10 10 20 20 30 40 30 40 50 50 60 60 70 0.0 26 TPSRD4M43J00-B0 0 Attenuation (dB) Attenuation (dB) TPSRD3M58J00-B0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 0 0 10 10 20 20 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 4.0 5.0 6.0 Frequency (MHz) TPSRD5M50J00-B0 Attenuation (dB) Attenuation (dB) TPSRD4M50J00-B0 3.0 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) Continued on the following page. 74 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) TPSRD6M50J00-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPSRD6M00J00-B0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 26 75 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRD Series 7.02.0 Ceramic trap TPSRD_W series has same structure as TPSRD_B series. But they can trap two individual frequencies at one time. Recommended for two channel multi-sound TV systems. 7.02.0 T EIAJ CODE Features 5.01.0 1.380.2 1.70.1 0.50.1 2.5 0.2 2.5 0.2 3.01.0 0.30.1 1. Space saving 2. Three-terminals type (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) 30dB Attenuation BW (fn1) (kHz) TPSRD5M50W00-B0 5.500 5.742 32 min. 25 min. 70 min. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 15H 330ohm 1kohm 50ohm Rg=50ohm R.F. Voltmeter S.S.G. Frequency Characteristics 0 0 10 10 20 20 30 40 30 40 50 50 60 60 70 5.0 76 Attenuation (dB) Attenuation (dB) 27 Frequency Characteristics (Spurious) 5.1 5.2 5.3 5.4 5.5 5.6 Frequency (MHz) 5.7 5.8 5.9 6.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 10.0 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz Double Traps TPWRD Series 7.02.0 T W B 7.02.0 Ceramic trap TPWRD_B series consist of two wafers with two trap frequencies. Recommended for Dual standard sets. EIAJ CODE 1. Good performance of attenuation 2. Small and thin package 3. Three-terminals type 5.01.0 1.380.2 1.70.1 Features 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output 3.51.0 0.30.1 0.50.1 (3) (2) (in mm) (1) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) 30dB Attenuation BW (fn1) (kHz) TPWRD5M50B02-B0 5.500 6.500 30 min. 30 min. 50 min. TPWRD5M50B03-B0 5.500 6.000 30 min. 30 min. 50 min. TPWRD5M50B04-B0 5.500 5.742 30 min. 30 min. 50 min. TPWRD6M00B01-B0 6.000 6.500 30 min. 30 min. 70 min. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 8.2H 150ohm Rg=50ohm 330ohm 50ohm S.S.G. R.F. Voltmeter Frequency Characteristics TPWRD5M50B03-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPWRD5M50B02-B0 30 40 30 40 50 50 60 60 70 5.0 5.2 5.4 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 7.0 28 70 4.5 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 6.5 Continued on the following page. 77 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics TPWRD6M00B01-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPWRD5M50B04-B0 30 40 30 40 50 50 60 60 70 4.5 4.7 4.9 5.1 5.3 5.5 5.7 Frequency (MHz) 5.9 6.1 6.3 70 5.0 6.5 5.2 5.4 5.6 5.8 6.0 6.2 Frequency (MHz) 6.4 6.6 6.8 7.0 7.0 8.0 9.0 10.0 7.0 8.0 9.0 10.0 Frequency Characteristics (Spurious) TPWRD5M50B03-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) TPWRD5M50B02-B0 30 40 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 7.0 8.0 9.0 70 0.0 10.0 1.0 2.0 0 0 10 10 20 20 30 40 28 78 30 40 50 50 60 60 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) 4.0 5.0 6.0 Frequency (MHz) TPWRD6M00B01-B0 Attenuation (dB) Attenuation (dB) TPWRD5M50B04-B0 3.0 7.0 8.0 9.0 10.0 70 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (MHz) P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Trap 3.5-6.5MHz Triple Traps TPTRD Series 8.02.0 T T B 7.02.0 Ceramic trap TPTRD_B series consist of 3 wafers with 3 trap frequencies. Recommended for Multi standard sets. EIAJ CODE Features 1.380.2 1. Good performance of attenuation 2. Space saving for Multi set 3. Three-terminals type 5.01.0 1.70.1 0.30.1 0.50.1 5.0 max. 2.50.2 2.50.2 (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Part Number Nominal Center Frequency (fn1) (MHz) Nominal Center Frequency (fn2) (MHz) Nominal Center Frequency (fn3) (MHz) Attenuation (at fn1) (dB) Attenuation (at fn2) (dB) Attenuation (at fn3) (dB) 30dB Attenuation BW (fn1) (kHz) TPTRD5M50B01-B0 5.500 6.000 6.500 30 min. 30 min. 30 min. 50 min. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Test Circuit 8.2H 150ohm 50ohm 330ohm Rg=50ohm S.S.G. R.F. Voltmeter Frequency Characteristics (Spurious) 0 0 10 10 20 20 30 Attenuation (dB) Attenuation (dB) Frequency Characteristics 40 50 60 30 50 60 70 70 80 80 90 5.000 29 40 5.500 6.000 Frequency (MHz) 6.500 7.000 90 0.0 2.5 5.0 7.5 10.0 Frequency (MHz) 79 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment 0.30.2 Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series 0.20.2 1.4 max. 4.50.1 2.00.1 CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). 0.40.05 1.0 max. 4.1 max. 0.4(ref.) 0.4(ref.) 0.80.1 0.80.1 Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Recommended for Pb free soldering 1.50.1 Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion (MHz) (kHz) (mV) (%) Part Number 1.50.1 (in mm) IC Detection Method CDSCB10M7GA105A-R0 10.700 30kHz 220 min. 110 min. 1.5 max. TEA5757HL Quadrature CDSCB10M7GA113-R0 10.700 30kHz 300 min. 110 min. 1.0 max. TA2154FN Quadrature CDSCB10M7GA119-R0 10.700 30kHz 500 min. 75 min. 1.0 max. TRF6901 Quadrature CDSCB10M7GA121-R0 10.700 30kHz 390 min. 80 min. 1.0 max. LV23100V Quadrature CDSCB10M7GF072-R0 10.700 (fn) fn150 min. 130 min. 2.0 max. TA31161 Quadrature CDSCB10M7GF107-R0 10.700 (fn) fn80 min. 52 min. 3.0 max. TA31272F Quadrature CDSCB10M7GF109-R0 10.700 (fn) fn100 min. 170 min. 3.0 max. TK14588V Quadrature (fn) means nominal center frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 30 80 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Dimensions 2.6 3.0 1.0 2.0 1.0 (in mm) Test Circuit CDSCB10M7GA105A-R0 CDSCB10M7GA113-R0 Vcc (1.2V) 35 3 34 4 33 5 32 6 31 TEA5757HL (PHILIPS) 100k 28 27 26 25 29 9 28 10 27 26 12 24 23 22 21 20 19 18 17 16 11 12 13 14 15 TA2154FN (TOSHIBA) 1 2 3 4 5 6 7 8 9 10 + X 30 8 11 DC OUT 29 0.01 7 30 S.S.G. 2.2 680p 2 0.01 + 100 0.01 10 + 48 47 46 45 44 43 42 41 40 39 38 37 0.1 1 36 0.01 0.1 0.01 Vcc (3.0V) D.C. OUT AF OUT X : CDSCB10M7GA113-R0 Unit C : F R: S.S.G. 10 25 0.47 0.1 + X AFC (n) 0.22 150 AF OUT X : CDSCB10M7GA105A-R0 Unit C : F R: CDSCB10M7GA119-R0 CDSCB10M7GA121-R0 Vcc (3.0V) IF Input 10p 10p 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 LV23100V (SANYO) 35 3 34 32 5 6 TRF6901 31 7 (TEXAS INSTRUMENTS) 30 8 29 9 28 100p 10 27 11 26 12 25 13 14 15 16 17 18 19 20 21 22 23 24 0.01 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 10k 10 1000p 33 4 2 + 0.047 + 47p + 0.47 0.01 3.3k 0.1 + 1 0.22 0.47 + S.G. 100p 10k + PIC16F84 (Control IC) PIC16F84 2 3 4 5 1k 2.2 6 7 1 8 2 3 4 5 6 7 8 9 9 10k + 30 10k 18 17 16 15 14 13 12 11 10 18 17 16 15 14 13 12 11 10 1 100p 2 1 X X 48 47 46 45 44 43 42 41 40 39 38 37 36 1 1 10k 0.01 82p 10 0.015 22+ 0.047 4.7 Vcc (3.2V) 0.01 220k 15p 0.047 120p 75 0.01 D.C. Output AF Output 68p 0.01 0.01 AF Output 100 4.7 AFC (p) 330p 0.1 13 14 15 16 17 18 19 20 21 22 23 24 0.1 X : CDSCB10M7GA119-R0 Unit C : F R: L:H 1k X : CDSCB10M7GA121-R0 2.2 + 10k 0.1 Unit C : F R: Continued on the following page. 81 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit CDSCB10M7GF072-R0 CDSCB10M7GF107-R0 Vcc (5.0V) Vcc (3V) AF OUT 0.01 0.01 4.7 R 0.01 0.01 24 23 22 21 20 19 18 17 16 15 14 13 X TA31272FN (TOSHIBA) 15 14 13 12 11 10 2 3 4 5 6 0.01 16 1 9 7 8 9 TA31161 (TOSHIBA) 2 3 4 5 6 7 8 0.01 0.1 0.01 0.01 1 X : CDSCB10M7GF072-R0 R : 820 Unit C : F R: L:H + 33 0.01 IF IN 10 11 12 1000p 10p 0.01 AF OUT X R C 0.1 X : CDSCB10M7GF107-R0 R : 1.2k C : open Unit C : F R: S.S.G. CDSCB10M7GF109-R0 1.2 Vcc (3V) R X 0.01 D.C. OUT AF OUT 0.01 1000p 8p 12k 16 15 1 2 14 13 12 0.01 51k 11 10 9 7 8 5 6 + S.S.G. 4.7 4 0.01 0.01 0.01 3 51 0.01 TK14588V (TOKO) X : CDSCB10M7GF109-R0 R : 820 Unit C : F R: L:H Frequency Characteristics CDSCB10M7GA105A-R0 1000 CDSCB10M7GA113-R0 100 1000 10 100 100 10 1 1 30 10 Distortion 10 1 1 0.1 0.1 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.0V 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 Distortion (%) Distortion Recovered AF Output Voltage (mV) AF Output Distortion (%) Recovered AF Output Voltage (mV) AF Output 100 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 1.2V 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 Frequency (MHz) Continued on the following page. 82 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics CDSCB10M7GA119-R0 1000 CDSCB10M7GA121-R0 100 1000 10 100 100 AF Output 1 10 Distortion 10 1 1 0.1 Distortion (%) Recovered AF Output Voltage (mV) 1 Distortion (%) Distortion 10 0.1 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.2V input = 100 dB fdev. = 60kHz fmod. = 1kHz Vcc = 3.0V 10.4 10.5 10.6 10.7 10.8 10.9 11.0 10.3 11.1 10.4 10.5 10.6 10.7 10.8 10.9 CDSCB10M7GF072-R0 1000 11.1 CDSCB10M7GF107-R0 100 100 1000 10 1 1 Recovered AF Output Voltage (mV) 10 T.H.D. (%) 100 AF Output Voltage (mV) 11.0 Frequency (MHz) Frequency (MHz) 100 10 AF Output Distortion 1 10 0.1 Distortion (%) 10.3 Input signal conditions 0.1 1 Input Level Mod. Freq. Freq.Dev. 10.3 10.5 10.7 Frequency (MHz) 10.9 Input = 100dB fdev. = 80kHz fmod. = 1kHz Vcc = 3.0V 11.1 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 100dB 1000Hz 40kHz 11.0 CDSCB10M7GF109-R0 1000 100 100 10 10 1 1 10.3 T.H.D. (%) AF Output Voltage (mV) Recovered AF Output Voltage (mV) AF Output 100 30 0.1 10.5 10.7 Frequency (MHz) 10.9 11.1 Input = 100dB fdev. = 64kHz fmod. = 1kHz Vcc = 3.0V 83 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Discriminator 10.7MHz Standard Lead Type CDALA Series 8.01.0 MARKING Freq. Rank (Color Dot) 5.01.0 CDALA10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in wide bandwidths. EIAJ CODE 5.01.0 0.40.1 0.650.1 Features 3.01.0 5.00.2 CDALA10M7G_ Series (in mm) 8.01.0 MARKING Freq. Rank (Color Dot) 5.01.0 1. Compact and excellent mechanical strength 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. We recommend combination: ceramic discriminator CDALA10M7 series and "CERAFIL" SFELA10M7 of the same frequency rank. 0.30.1 0.50.1 EIAJ CODE 5.01.0 0.40.1 0.650.1 5.00.2 3.01.0 0.30.1 0.50.1 CDALA10M7C_ Series (in mm) Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion (MHz) (kHz) (mV) (%) Part Number IC Detection Method CDALA10M7GA001-B0 10.700 30kHz - - 0.6 max. CX20029 Quadrature CDALA10M7GA016-B0 10.700 30kHz 300 min. within60 to 90mV 0.9 max. TA8122F Quadrature CDALA10M7GA018-B0 10.700 30kHz 300 min. within60 to 90mV 0.9 max. TA8132N Quadrature CDALA10M7GA046-B0 10.700 30kHz 330 min. 280 min. 1.0 max. LA1832 Quadrature CDALA10M7GA048-B0 10.700 30kHz 400 min. 700 min. 1.0 max. LA1835 Quadrature CDALA10M7GA092-B0 10.700 30kHz 300 min. 60 min. 1.0 max. TA2132P Quadrature CDALA10M7CA001-B0 10.700 30kHz 242 min. 35 min. 1.0 max. CX20091 Quadrature CDALA10M7CA005A-B0 10.700 30kHz 100 min. 600 min. 6.0 max. LA7770 Quadrature CDALA10M7CA040-B0 10.700 30kHz 130 min. 40 min. 0.7 max. TEA5710 Quadrature The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CDALA10M7GA018-B0: Color dot is different from standard series. Standard Center Frequency Rank Code 31 84 CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Test Circuit CDALA10M7GA001-B0 CDALA10M7GA016-B0 DC Out AF Out 33 1 32 39 TA8122F (TOSHIBA) 1 2 CDALA10M7GA018 1k 270 0.022 5.6k 8 1200p + 22 0.047 24 23 22 1 2 3 21 4 0.047 16 15 14 + 1 13 (SANYO) 6 7 8 9 10 11 12 3k 2.2 CDALA10M7GA046 10 1 0.047 + Unit R: C:F REG 100 Unit R: C:F Vcc (5V) CDALA10M7GA048-B0 CDALA10M7GA092-B0 DC OUT CSBLA456KE2ZF15 2.2 29 28 27 26 1 2 3 4 5 25 24 23 22 21 20 19 18 17 16 11 12 13 14 15 LA1835 (SANYO) 7 8 9 10 15 1 2 14 13 11 10 9 7 8 TA2132P(TOSHIBA) 20k 3k + 10 + + 0.47 3 + 4 VCC(7V) 6 Unit R: C:F IF-IN CDALA10M7CA001-B0 AF Output 5 Unit R: C:F CDALA10M7GA048 REG. VCC 5V 12 4.7 1k 1k IF-IN 10 16 Vcc(3.0V) + 1 10 510 + 0.047 0.047 6 CDALA10M7GA092 270 0.01 30 Rch Lch 10 10 + + 0.033 L. P. F. + 1 15k 5k AF OUT + 20k 3.3 + L. P. F. 33n 330p 1500p 4.7 33n 47n 5 17 75 IF-IN Vt 300 18 270 Vcc 3V 75 19 300 + 0.022 CDALA10M7CA005A-B0 AFC 10 3 0.1 2k 0.1 470p 10k 20k 4 5 6 13 7 11 12 13 14 8 12 11 9 10 5p 50 1k Vcc=12V + 14 + - 31 0.01 9 15 IC : LA7770 (SANYO) (SONY) 8 16 0.01 7 2 17 0.01 6 1 18 0.01 5 19 33 4 10 3 CDALA10M7CA001 2 100 1 220p 20 0.022p CX20090 18 17 16 15 Demod.OUT 10k CDALA10M7CA005A DATA OUT 28 27 26 25 24 23 22 21 20 19 10k 2k 1000p + + + 5.6k 10 4.7 + 0.01 33 0.1 100 10 + DC Bias +5.2V DC Bias +5V 470p IF in 0.01 0.01 AFC 47n 20 LA1832 6.8k 9 10 11 12 22 0.01 + + 1 + 3.3 0.1 0.022 330p 7 CDACV10M7GA016 AF OUT AFC 6 9 10 11 12 CSBLA456KE2ZF15 0.01 24k 270 5 8 Unit R: C:F + 0.033 7 CDALA10M7GA046-B0 TA8132N (TOSHIBA) 4 6 + DC out AF out 2.2 24 23 22 21 20 19 18 17 16 15 14 13 3 5 SFELA10M7DF00 IF in Unit R: C:F SFELA10M7DF00 2 4 Vcc=+3.0V Vcc 3V 1 3 22 CDALA10M7GA001 28 CDALA10M7GA018-B0 1F in 0.1 24 23 22 21 20 19 18 17 16 15 14 13 AF OUTPUT - 100k Fg=50 9 S.S.G. + CX20029 0.022 5 0.01 24k REF 280 + 0.033 AFC 2.5 330p 1k VCC +3V IF IN Ref. Unit R: C:F Unit R: C:F Continued on the following page. 85 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit CDALA10M7CA040-B0 VCC (3V) + 0.01 100 + AF-OUT 100 10 + 0.01 + 1 DC-OUT 24 23 22 21 20 19 18 TEA5710 1 2 3 4 5 17 16 15 14 13 10 11 12 (PHILIPS) 6 7 8 9 0.01 0.22 280 0.22 50 Unit R: C:F S.S.G. Frequency Characteristics CDALA10M7GA001-B0 CDALA10M7GA016-B0 500 100 10 10 1 Recovered AF Output Voltage (mV) AF Output Distortion (%) Recovered AF Output Voltage (mV) 100 Distortion 1 10.4 10.6 10.7 10.8 Frequency (MHz) 10.9 10 1 Distortion 1 0.1 10.5 10 AF Output 0.1 Input signal conditions Input signal conditions Input Level Mod. Freq. Freq.Dev. Input Level Mod. Freq. Freq.Dev. 110dB 400Hz 22.5kHz 10.4 11.0 10.5 CDALA10M7GA018-B0 1000 Distortion (%) 500 10.6 10.7 10.8 Frequency (MHz) 10.9 80dB 1000Hz 22.5kHz 11.0 CDALA10M7GA046-B0 100 1000 100 1 Distortion 1 0.1 31 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 10 100 Distortion 10 1 1 0.1 Distortion (%) 10 Recovered AF Output Voltage (mV) 10 AF Output 100 Distortion (%) Recovered AF Output Voltage (mV) AF Output Input signal conditions Input signal conditions Input Level 80 dB Mod. Freq. 1000 Hz Freq. Dev. 22.5 kHz Input Level 112 dB Mod. Freq. 1000 Hz Freq. Dev. 75 kHz 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) Continued on the following page. 86 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics CDALA10M7GA048-B0 CDALA10M7GA092-B0 500 500 AF Output Recovered AF Output Voltage (mV) 10 10 100 1 Distortion AF Output 10 1 Distortion 0.1 1 1 Distortion (%) 10 Distortion (%) Recovered AF Output Voltage (mV) 100 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Input signal conditions 112dB 1000Hz 75kHz 10.4 10.5 11.0 10.6 10.7 10.8 10.9 11.0 Input Level Mod.Freq. Freq.Dev. 80dB 1000Hz 22.5kHz Frequency (MHz) CDALA10M7CA001-B0 1000 CDALA10M7CA005A-B0 100 5000 500 AF Output 100 Distortion 100 10 1 10 0.1 1 Distortion Input signal conditions Input signal conditions Input Level 100 dB Input Level 110 dB Mod. Freq. 400 Hz Freq. Dev. 22.5 kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 Distortion (%) 1 10 Recovered AF Output Voltage (mV) 10 AF Output Distortion (%) Recovered AF Output Voltage (mV) 1000 100 Mod. Freq. 1000 Hz Freq. Dev. 75 kHz 10.6 10.7 10.8 Frequency (MHz) CDALA10M7CA040-B0 100 100 10 AF Output Distortion 10 1 1 0.1 Distortion (%) Recovered AF Output Voltage (mV) 1000 31 Input signal conditions Input Level 100 dB Mod. Freq. 1000 Hz Freq. Dev. 22.5 kHz 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) 87 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied IC Reference Table Please see following table for reference applied IC. If you can not find IC part number seeking, please contact our sales representative. ex. : CDALA10M7GA016-B0 Suffix Number CDSCB10M7GA105A-R0 Suffix Number IC Manufacturer ATMEL INFINEON MATSUSHITA MOTOROLA NEC PHILIPS RFMD 31 ROHM IC Part Number Suffix Number U2501B 028 U2765B 095 U4313B IC Manufacturer IC Part Number Suffix Number KA22425 089 KA2244 059 081 KA22901 090 U4490B 034V KA2292 063 U829B 025 KA2295 064 SAMSUNG TDA1576T 051 KA2297 091 TDA6160X 038 KA2298B 065 TDA6160-2X 044 KB22902 103 AN6138SH 097 S1A0903 118A AN7004 011 LA1150 070 SANYO AN7006S 014A LA1225M 108A AN7007SU 013 LA1260 007 AN7232 053 LA1805 026 MC13156 049 LA1810 022 MC13158 073 LA1814M 115 MC13173 052 LA1816 015 MC3363 087 LA1822 094 PC1391M 056 LA1823 101 NE604 020 LA1827M 083 SA605 042 LA1830 037 SA626 047 LA1831 043 SA636DK 096 LA1832 / M 046 SA639 085 LA1833 086 TBA120U 029 LA1835 / M 048 TBA229-2 021A LA1838 / M 079 TDA1596T 120 LA7770 023 TDA2557 024 LV23000M 114 TEA5591 017 LV23100V 121 TEA5592 030 CX1691M 078 TEA5594 035 CX-20029 001 TEA5710 040 CX-20076 002 TEA5712T 055 CXA1030P 012 093 SONY TEA5757HL 105A CXA1111 TEA5762 / 5757 061 CXA1238 027 UAA3220TS 098 CXA1238N 027N RF2905 111 CX1343M 032 RF2925 104 CXA1376AM 054 BA1440 019 CXA1538M / N / S 069 BA1448 060 CXA1611 075 BA4110 066 CXA1619B 117 BA4220 041 CXA1991N 068 BA4230AF 005 CX3067M 076 BA4234L 004 TRF6901 119 BA4240L 067 T. I. Continued on the following page. 88 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied IC Reference Table Continued from the preceding page. IC Manufacturer TOKO TOSHIBA IC Part Number Suffix Number TK14570L 122 TK14581 062 TK14583V 112 TK14588V 109 TA2003 031 TA2007 033 TA2008A / AN 045 TA2022 050 TA2029 036 TA2046 058 TA2057 057 TA2099N 082 TA2104AFN 080 TA2104F 080A TA2111N / F / FN 077 TA2132 092 TA2132BP 092D TA2142FN 102 TA2149AN 100A TA2149N 100 TA2154FN 113 TA2159F 116 TA31161 072 TA31272F 107 TA7130P 009 TA7303P 008 TA7640AP 006 TA7765AF 071 TA8122AN / AF 016 TA8132AN / AF 018 TA8186 039 TA8721ASN 088 31 89 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied Circuit LA1140 (Automotive Radio) L1 2.2H AGC R7 200 C3 0.047 C7 0.047 VR1 150k C8 0.047 L2 SFELA10M7HAA0-B0 R4 10k R6 SFELA10M7HAA0-B0 330 C.F. 16 12 9 11 R13 12k 13 1 C1 0.022 0.047 C6 R8 330 FRONT END R2 C.F. 1.8k R3 C2 0.022 C4 1.8k R2 1k C5 AFC 7 + C9 0.047 C10 4.7 LA1140 (SANYO) 2 + 8 3 4 5 6 14 22k 0.047 x 2 R9 220k R10 2.2 C14 0.047 15 + C11 33p 10 R12 R1 100 Vref. R14 C13 33p R2 47k C15 CXA1019M (Radio) FM PF FM OSC CERAMIC DISCRIMINATOR FM CERAFIL(R) (SFELA10M7FA00-B0) (CDALA10M7CA001-B0) W R 8 FM BPF AM ANT 12 IF FM IF OUT IN 6 14 17 7 FM FRONT END FM/AM BAND SELECT W 2 FM DISCRI FM IF AMP DETECTOR 19 METER 25 26 Vcc RIPPLE FILTER TUNING METER 13 REGULATOR 8 REG OUT W 28 13 1 CXA1019M(SONY) 10 11 AM FRONT END 5 18 AM IF AMP DETECTOR AM IF IN 20 16 22 AM OSC W AF PRE/POWER AMP VOL 23 DEP OUT 21 W 4 24 AF IN 27 W SP 3 W W AM CERAFIL(R) (SFULA455KU2B-B0) VOL No adjustment is needed the FM detection stage due to use the ceramic discriminator. Continued on the following page. 31 90 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Ceramic Discriminator 10.7MHz Applied Circuit Continued from the preceding page. TA8122F (Radio) CSBLA456KE2ZF16-B0 23 FM OSC 22 2 20 19 FM OSC AM OSC AF 3 PRE FM DET AM AGC AM MIX 4 5 AM AGC W BPF AM IF IN LPF2 VCO 16 15 Phase COM Phase COM VCO FM IF IN FM IF 8 FM DET 9 GND2 TUN LED 10 TUN LED 0.022 L 0.015 14 OUT R R 4.7 13 HYX TA8122F(TOSHIBA) SW ST LED 11 12 ST LED QUAD 0.033 560 SFULA455KU2B-B0 4.7 W W ST DECODER Freq Divider T2 10H OUT L 17 L DET 7 0.015 AM AM/FM MONO SW AM IF 6 Vcc2 0.1 LPF1 18 33 FM MIX MPX IN 21 AM MIX FM RF GND1 DEF OUT AM MIX AM RF 1 AM OSC W SFELA10M7FA00-B0 W CDALA 10M7GA16-B0 22 OUT Vcc1 24 FM RF IN W W FM 560 AM PF IN FM PF MO 0.068 10F 15p ST 22k T1 0.1 L2 100k 8p 0.022F 33k 5p 22p L1 20p L3 100k 330p IS2236 Vcc (3V) Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK(R)) 31 91 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRH Series 10.0 max. MARKING 8.0 max. Ceramic discriminator CDSRH series is a wide band, low profile type using thickness shear mode vibration. EIAJ CODE Features 1. Low profile 8.0mm type 2. Suitable for Multi-sound Broadcasting system 3. Two-terminals type and three-terminals type are available. 5.01.0 1.380.2 0.50.1 5.00.2 4.0max. 0.30.1 CDSRH_EK Series (in mm) EIAJ M A R K I N G CODE 5.01.0 1.380.2 1.70.1 2.50.2 2.50.2 4.0 max. 0.30.1 0.50.1 CDSRH_CK Series (3) 32 8.0 max. 10.0 max. (2) (1) (1) : Input (2) : Ground (3) : Output (in mm) Part Number Nominal Center Frequency (fn) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output Voltage (at fn) (mV) Distortion (%) IC Detection Method CDSRH4M50EK020-B0 4.500 fn80 min. 245 min. 1.0 max. LA7550/7555 Quadrature CDSRH4M50EK023-B0 4.500 fn60 min. 230 min. 2.5 max. M51496P Quadrature CDSRH4M50EK035-B0 4.500 fn55 min. 240 min. 1.0 max. LA7680/7681 Quadrature CDSRH4M50EK049-B0 4.500 fn100 min. 220 min. 1.0 max. LA7577 Quadrature CDSRH4M50EK060-B0 4.500 fn90 min. 90 min. 1.0 max. M52318SP Quadrature CDSRH4M50EK069-B0 4.500 fn60 min. 320 min. 1.5 max. TA8701N Quadrature CDSRH4M50EK070-B0 4.500 fn50 min. 65 min. 1.5 max. M52007FP Quadrature CDSRH5M50EK023-B0 5.500 fn45 min. 220 min. 1.0 max. M51496P Quadrature CDSRH5M50EK035-B0 5.500 fn80 min. 350 min. 1.0 max. LA7680/7681 Quadrature CDSRH5M50EK049-B0 5.500 fn60 min. 500 min. 1.0 max. LA7577 Quadrature CDSRH5M50EK054-B0 5.500 fn100 min. 300 min. 1.2 max. TDA3857 Quadrature CDSRH5M50EK060-B0 5.500 fn70 min. 190 min. 1.5 max. M52318SP Quadrature CDSRH5M74EK054-B0 5.742 fn90 min. 340 min. 1.2 max. TDA3857 Quadrature CDSRH6M00EK049-B0 6.000 fn60 min. 500 min. 1.0 max. LA7577 Quadrature CDSRH6M00EK054-B0 6.000 fn90 min. 340 min. 1.5 max. TDA3857 Quadrature CDSRH6M00EK060-B0 6.000 fn60 min. 180 min. 2.5 max. M52318SP Quadrature CDSRH6M50EK020-B0 6.500 fn110 min. 350 min. 1.2 max. LA7550/7555 Quadrature CDSRH6M50EK049-B0 6.500 fn60 min. 500 min. 1.0 max. LA7577 Quadrature CDSRH6M50EK054-B0 6.500 fn90 min. 340 min. 1.5 max. TDA3857 Quadrature CDSRH6M50EK060-B0 6.500 fn60 min. 160 min. 2.5 max. M52318SP Quadrature CDSRH4M50CK020-B0 4.500 fn50 min. 280 min. 2.0 max. PC1382C Quadrature CDSRH4M50CK026-B0 4.500 fn40 min. 70 min. 1.2 max. LA7530 Quadrature CDSRH4M50CK029-B0 4.500 fn65 min. 250 min. 1.2 max. M51365SP Quadrature CDSRH4M50CK030-B0 4.500 fn40 min. within130 +30/-20mV 3.0 max. M51348FP Quadrature Continued on the following page. 92 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Part Number Nominal Center Frequency (fn) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output Voltage (at fn) (mV) Distortion (%) CDSRH5M50CK026-B0 5.500 fn50 min. 500 min. CDSRH5M50CK029-B0 5.500 fn70 min. 420 min. CDSRH5M50CK030-B0 5.500 fn55 min. CDSRH6M00CK026-B0 6.000 CDSRH6M00CK029-B0 IC Detection Method 3.0 max. LA7530 Quadrature 1.5 max. M51365SP Quadrature 150 min. 3.0 max. M51348FP Quadrature fn50 min. 400 min. 3.0 max. LA7530 Quadrature 6.000 fn70 min. 450 min. 1.7 max. M51365SP Quadrature CDSRH6M00CK030-B0 6.000 fn55 min. 150 min. 3.0 max. M51348FP Quadrature CDSRH6M50CK020-B0 6.500 fn60 min. 480 min. 2.0 max. PC1382C Quadrature CDSRH6M50CK026-B0 6.500 fn35 min. 400 min. 3.0 max. LA7530 Quadrature CDSRH6M50CK029-B0 6.500 fn70 min. 430 min. 2.0 max. M51365SP Quadrature Characteristics shown above is as of 100% Dev. Part Numbers are varied with applied IC. Please note circuits and specifications are also varied with IC. Test Circuit CDSRH4M50CK029-B0 IF-in 680 (2) 3.3k 10n 23 22 21 20 19 18 17 16 15 14 0.01 13 IN 3 4 5 6 7 8 18 9 10 11 12 14 4.7 AF Out + 7 10 12 Vcc (12V) 0.01 10n 10n Vcc=12V 100 10k 15n 5.6k 2 680 1 DC Out 17 M51365SP 19 (MITSUBISHI) 50 LA7577 (SANYO) 18 13 + 10 0.01 24 AF-out 12p (3) 680 (1) 0.01 CDSRH4M50EK049-B0 Ground Ground Unit C : F R: Frequency Characteristics CDSRH4M50EK049-B0 CDSRH4M50CK029-B0 300 300 10 1 100 10 10 1 Distoriton Distoriton 1 0.1 4.3 4.5 Frequency (MHz) Distoriton (%) 10 Recovered AF Output Voltage (mV) AF Output 100 Distoriton (%) Recovered AF Output Voltage (mV) AF Output 4.7 1 0.1 4.3 4.5 4.7 Frequency (MHz) 32 93 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment Ceramic Discriminator 3.5-6.5MHz Low Profile Type CDSRL Series 10.0 max. EIAJ CODE MARKING Features 1. Low profile 6.0mm type 2. Suitable for Multi-sound Broadcasting system 3. Two-terminals type and three-terminals type are available. 6.0 max. Ceramic discriminator CDSRL series is a wide band, low profile type using thickness shear mode vibration. 5.01.0 1.00.2 5.00.2 4.0max. CDSRL_EK Series 0.30.1 0.50.1 (in mm) EIAJ CODE MARKING 5.01.0 1.10.1 1.70.1 2.50.2 2.50.2 4.0 max. 0.30.1 0.50.1 CDSRL_CK Series (3) Part Number Nominal Center Frequency (fn) (MHz) CDSRL4M50EK020-B0 CDSRL5M50EK020-B0 6.0 max. 10.0 max. (2) (1) (1) : Input (2) : Ground (3) : Output (in mm) Recovered Audio 3dB BW (kHz) Recovered Audio Output Voltage (at fn) (mV) Distortion (%) IC Detection Method 4.500 fn80 min. 245 min. 1.0 max. LA7550/7555 Quadrature 5.500 fn100 min. 330 min. 1.2 max. LA7550/7555 Quadrature CDSRL4M50CK020-B0 4.500 fn50 min. 280 min. 2.0 max. PC1382C Quadrature CDSRL4M50CK029-B0 4.500 fn65 min. 250 min. 1.2 max. M51365SP Quadrature CDSRL4M50CK030-B0 4.500 fn40 min. within130 +30/-20mV 3.0 max. M51348FP Quadrature CDSRL5M50CK030-B0 5.500 fn55 min. 150 min. 3.0 max. M51348FP Quadrature CDSRL6M00CK029-B0 6.000 fn70 min. 450 min. 1.7 max. M51365SP Quadrature CDSRL6M00CK030-B0 6.000 fn55 min. 150 min. 3.0 max. M51348FP Quadrature CDSRL6M50CK020-B0 6.500 fn60 min. 480 min. 2.0 max. PC1382C Quadrature CDSRL6M50CK026-B0 6.500 fn35 min. 400 min. 3.0 max. LA7530 Quadrature Characteristics shown above is as of 100% Dev. Part Numbers are varied with applied IC. Please note circuits and specifications are also varied with IC. 33 94 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Test Circuit CDSRL4M50EK020-B0 CDSRL4M50CK029-B0 (1) (2) 3.3k 0.01 19 18 17 15 14 13 11 12 IN LA7550 (SANYO) 2 6 7 8 0.01 22 1.2k M51365SP 19 (MITSUBISHI) 14 0.01 4.7 AF Out + 7 10 12 Vcc=12V 0.01 - + 0.01 100 + 0.01 0.015 AF OUT 5.6k 0.01 9 DC Out 17 0.01 1 18 13 50 20 24 0.01 DC5V Chang 12p (3) 680 Vcc 9V 680 0.01 0.01 0.01 SIF IN 10 Ground Ground Unit C : F R: Frequency Characteristics CDSRL4M50EK020-B0 CDSRL4M50CK029-B0 500 300 300 AF Output 1 100 10 10 1 Distoriton (%) 10 Recovered AF Output Voltage (mV) 10 Distoriton (%) Recovered AF Output Voltage (mV) AF Output 100 Distoriton Distoriton 1 0.1 4.3 4.5 Frequency (MHz) 4.7 1 0.1 4.3 4.5 4.7 Frequency (MHz) 33 95 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) CERAFILr 10.7MHz Chip Type SFECS/SFECD Series Temperature (C) 1. Standard Reflow Soldering Condition (1) Reflow Peak (240C max.) 240 200 Heating (200C) Pre-heating (120-170C) 100 Gradual Cooling 30 sec. min. 30 sec. max. 60-120 sec. 120 sec. min. (2) Soldering Iron Filter shall be soldered at +2805C for 3.00.5 seconds. The soldering iron shall not touch the filter while soldering. 2. Wash The component cannot withstand washing. CERAFILr 10.7MHz Chip Type SFECV Series 1. Standard Reflow Soldering Condition (1) Reflow 5sec. 240 Temperaturu(C) 230 Gradual Cooling 150 60 (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron at +2805C for 3.00.5 seconds. 2. Wash The component cannot withstand washing. CERAFILr 10.7MHz Lead Type The component cannot withstand washing. 33 96 30 Time(sec.) P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) CERAFILr 4.5-6.5MHz Chip Type 1. Standard Reflow Soldering Condition (1) Reflow 5 sec. 240 Temperature (C) 230 Gradual Cooling 150 60 30 Time (sec.) (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron at +2805C for 3.00.5 seconds. 2. Wash The component cannot withstand washing. CERAFILr 3.5-6.5MHz Lead Type The component cannot withstand washing. CERAFILr 455kHz Chip Type PFWCC Series 1. Standard Reflow Soldering Condition (1) Reflow 5 sec. Temperature (C) 240 230 Gradual Cooling 150 Time (sec.) 60 30 (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron at +2805C for 3.00.5 seconds. 2. Wash The component cannot withstand washing. Continued on the following page. 33 97 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) Continued from the preceding page. CERAFILr 455kHz Chip Type SFPCA Series 1. Standard Reflow Soldering Condition (1) Reflow Peak (235 C max.) Temperature (C) 240 200 Heating (200 C) 100 Pre-heating (140-160 C) 30sec. min. 60sec.-120sec. (2) Soldering Iron Electrode is soldered directly with the tip of soldering iron at +3505C for 31 seconds. 2. Wash (1) Cleaning Solvent CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), Water (Demineralized Water), Cleaning Water Solution (Cleanthrough-750H, Pine Alpha 100S), Silicon (Technocare FRW) (2) Cleaning Conditions Immersion Wash 2 minutes max. in above solvent at +60C max. Shower or Rinse Wash 2 minutes max. in above solvent at +60C max. (3) Notice When components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. Please do not use ultrasonic cleaning. Total washing time should be within 4 minutes. Please ensure the component is thoroughly evaluated in your application circuit. Please do not use chlorine, petroleum and alkali cleaning solvents. If you plan to use any other type of solvents, please consult with Murata or Murata representative prior to using. CERAFILr 455kHz Lead Type The component cannot withstand washing. 33 98 Gradual Cooling 50sec. max. 120sec. min. P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Soldering and Mounting) Ceramic Trap 4.5-6.5MHz Chip Type 1. Standard Reflow Soldering Condition (1) Reflow 5 sec. 240 Temperature (C) 230 Gradual Cooling 150 60 Time (sec.) 30 (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron at +2805C for 3.00.5 seconds. 2. Wash The component cannot withstand washing. Ceramic Trap 3.5-6.5MHz Lead Type The component cannot withstand washing. Ceramic Discriminator 10.7MHz Chip Type 1. Standard Reflow Soldering Condition (1) Reflow 5 sec Temperature (C) 260 240 Gradual Cooling 150 60 60 Time (sec.) (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron at +2805C for 3.00.5 seconds. 2. Wash The component cannot withstand washing. Ceramic Discriminator 10.7MHz Lead Type The component cannot withstand washing. Ceramic Discriminator 3.5-6.5MHz 33 The component cannot withstand washing. 99 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 10.7MHz Chip Type SFECS/SFECD Series 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremly careful in determining shape and dimension before designing the circuit board diagram. 5. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 6. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 7. Do not clean or wash the component as it is not hermetically sealed. 8. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 9. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B Continued on the following page. 33 100 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) Continued from the preceding page. CERAFILr 10.7MHz Chip Type SFECV Series 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 6. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. the use of solder containing Ag should be done to prevent the electrode erosion. 7. Do not clean or wash the component as it is not hermetically sealed. 8. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 9. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A B Slit C Susceptibility to stress is in the order of : A>C>B CERAFILr 10.7MHz Lead Type 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 33 101 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 4.5-6.5MHz Chip Type 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the wrap or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 5. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. 6. Cleaning or washing of the component is not acceptable due to non sealed construction. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C CERAFILr 3.5-6.5MHz Lead Type 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Please contact Murata or Murata representative for soldering condition, in case of using lead free 33 102 solder. 6. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) CERAFILr 455kHz Chip Type PFWCC Series 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremly careful in determining shape and dimension before designing the circuit board diagram. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A B Slit C Susceptibility to stress is in the order of : A>C>B CERAFILr 455kHz Chip Type SFPCA Series 1. The component will be damaged when an excessive stress is applied. 2. Use coupling capacitors to prevent applying D.C. voltage between input-ground, output-ground of "CERAFIL" as D.C. current may harm the component. 3. In the case that the component is cleaned, confirm that no reliability degradation is created. 4. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 6. The product, packed in the moisture-proof bag (dry pack), is sensitive to moisture. The following treatment is required before applying re-flow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25 degree C and below 65% R.H., and solder within 48 hours. CERAFILr 455kHz Lead Type 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component will be damaged when an excessive stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 8. Use coupling capacitors to prevent applying D.C. voltage between input-ground, output-ground of "CERAFIL" as D.C. current may harm the component. 33 103 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) Ceramic Trap 4.5-6.5MHz Chip Type 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the wrap or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 5. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. 6. Cleaning or washing of the component is not acceptable due to non sealed construction. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C Ceramic Trap 3.5-6.5MHz Lead Type 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Please contact Murata or Murata representative for soldering condition, in case of using lead free 33 104 solder. 6. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) Ceramic Discriminator 10.7MHz Chip Type 1. The component mounted on the PCB may be damaged if excess mechanical stress is applied. 2. Layout the components on the PCB to minimize the stress imposed by the warp or flexure of the board. 3. After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. When the positioning claw or pick up nozzle are worn, the excess load is applied to the components while positioning or placing are performed. Careful checking and maintenance are necessary to prevent unexpected trouble. 5. When correcting component's position with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be considerd to prevent the electrode erosion. 6. Do not clean or wash the component as it is not hermetically sealed. 7. In case of overcoating the part, coating conditions such as material, curing temperature, and so on must be evaluated deeply. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component direction] Put the component laterally to the direction in which stress acts. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B Ceramic Discriminator 10.7MHz Lead Type 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 33 105 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Handling) Ceramic Discriminator 3.5-6.5MHz 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Please contact Murata or Murata representative for soldering condition, in case of using lead free 33 106 solder. 6. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 7. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Minimum Quantity Taping Ammo Pack Bulk SFELA 1,500 500 SFELB 1,500 500 SFVLA 1,000 500 SFKLA 1,500 500 o330mm o180mm Magazine Box CERAFILr<10.7MHz> SFECS 2,000 SFECD 2,000 SFECV 2,000 500 SFTLA CERAFILr<3.5-6.5MHz> SFSKA 3,000 2,000 SFSRA 500 500 SFSRL 500 SFTRD 1,500 SFSRH 500 CERAFILr<455kHz> 1,000 PFWCC SFPCA 1,000 SFULA 500 50 SFZLA 200 50 PFSLA 1,500 500 PFWLA 1,500 500 SFPLA 50 200 CFWLA 50 150 200 CFULA 500 BFULA Ceramic Traps<3.5-6.5MHz> TPSKA 3,000 TPWKA 3,000 TPSRA 2,000 500 TPSRD 1,500 500 TPWRD 1,500 500 TPTRD 1,500 500 CDALA 1,500 500 CDSRH 1,500 500 Ceramic Discriminators<10.7MHz> CDSCB 2,000 Ceramic Discriminators<3.5-6.5MHz> CDSRL 500 Continued on the following page. 33 107 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 10.7MHz Chip Type SFECS Series SFECD Series 40T0.15 10 pitch accumulated 40T0.15 10 pitch accumulated 1.55T0.05 2.0T0.05 5.5T0.05 (4.1) Cover film 3.35T0.1 4.0T0.1 10 max. 3max. (3.4) 0.05 0.05 2.02T0.1 3.45 0.3T0.05 3max. 10 max. Cover film Peeling strength 0.1 to 0.7N 3.35T0.1 4.0T0.1 (1.25) Peeling strength 0.1~0.7N Chip Filter 12.0T0.2 4.3 5.5T0.05 Chip Filter 0.25T0.05 1.55T0.05 2.0T0.05 4.0T0.1 12.0T0.2 4.0T0.1 User direction of feed User direction of feed * Part Number marked side is always facing up. * The feeding holes side of cavity tape is always input terminal. (in mm) * Part Number marked side is always facing up. * The feeding holes side of cavity tape is always input terminal. ( ) : Reference (in mm) 12.0 +0.08 -0.2 4.0T0.1 5.5T0.05 2.0T0.05 7.3T0.01 W0.1 1.5 Y0.0 1.75T0.1 SFECV Series 3.0T0.1 Part number marked side is always facing up. The feeding holes side of cavity tape is always input terminal. User Direction of Feed 1.9T0.1 10 max. W0.1 1.7 Y0.05 Cover film Chip Filter 3 max. 0.3T0.05 4.0T0.1 Peeling strengh (0.1Y0.7N) (in mm) Continued on the following page. 33 108 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 10.7MHz Lead Type SF_LA Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 To distinguish the direction Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (I) F 5.0 Lead spacing (II) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (II) t P020 Remarks 3.0 min. Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 109 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 4.5-6.5MHz Chip Type SFSKA Series (o80) (o330) Empty 240-280 min. 400-560 Peeling strength (0.1--0.7N) Cover film +0.1 o1.5 -0.0 8.00.1 10 max. 4.30.1 Chip filter 3 max. 7.50.1 9.00.1 2.20.5 2.00.1 4.00.1 +0.1 2.1-0.05 Empty Components +0.1 o1.5 -0.0 Leader Cover Film 0.30.05 Trailer 40-190 16.00.2 Part Number marked side is always facing up. 1.750.1 Dimensions of carrier tape 2.30.1 Dimensions of Reel o13.00.2 17.51.5 21.50.5 User direction of feed (in mm) Continued on the following page. 33 110 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 4.5-6.5MHz Lead Type SFSRA Series P2 P dh dh dS M W1 W0 W L1 H0 W2 M D0 P1 F1 F2 P0 t Direction Feed Item Code Dimensions Lead length under the hold down tape L1 5.0 min. Tolerance Pitch of component P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing (I) F1 2.5 0.2 Lead spacing (II) F2 2.5 0.2 Slant to the forward or backward dh 0 1.0 0.5 Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of Sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier Tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 P020 254.0 1.5 dS 0 1.0 Total tape thickness Pitch of sprocket hole (II) Body tilt Remarks Tolerance for Pitches 10ZP0=1271 Hold down tape doesn't exceed the carrier tape. The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 111 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Chip Type PFWCC Series Dimensions of Reel 3 max. 0.3 Cover film o13.00.5 (o180) 5.50.1 2.0 +0.5 -0.2 (3.6 max.) Cap Chip 5.40.1 10 max. (0.07) 8.00.1 6.10.1 M M M Peeling strength (0.1--0.7N) 3.150.1 4.00.1 2.00.1 o1.550.1 12.00.3 1.750.1 Dimensions of Carrier Tape 14.01.5 User direction of feed Part Number marked side is always facing up. 20.5 max. (in mm) CERAFILr 455kHz Chip Type SFPCA Series Dimensions of Carrier Tape Trailer 40~200 1.750.1 Empty Leader Cover Film Components Empty 240~280 O13.00.2 (O80) 400~560 (O330) 8.80.1 7.50.1 2.00.1 +0.1 -0 O1.5 16.00.2 4.00.1 Dimensions of Reel 2.20.5 12.00.1 User direction of feed Cover film 5.30.1 17.51.0 Label 21.51.5 7.40.1 (in mm) Continued on the following page. 33 112 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type PFSLA/PFWLA Series P2 dh dh P H0 W1 W0 W L1 W2 dS1 D0 F1 F1 P1 F t P0 Item Code Dimensions L1 3.0 min. Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing (1) F 5.0 W0.5 Y0.2 Lead spacing (2) F1 2.5 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 Lead length under the hold down tape Tolerance 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 W0.5 Y0.2 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (2) t P020 Note Hold-down tape doesn't exceed the carrier tape. The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 113 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type SFULA Series Standard of Magazine Cassette 5.60.3 390+0 -2 100.3 4.20.25 M* M* 8.10.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note : Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with the marking of products all facing toward the "muRata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 1.1 1.1 in mm Tolerance unless otherwise specified : 0.2 Material : Polycarbonate Camber of Case : 1mm max. against entire length (reference) Twist of Case : 0.5mm max. (reference) CERAFILr 455kHz Lead Type SFZLA Series Standard of Magazine Cassette 9.00.3 390+0 -2 7.60.25 8.10.3 10.00.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note : Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with the marking of products all facing toward the "muRata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 1.1 M* M* M* 1.1 in mm Tolerance unless otherwise specified : 0.2 Material : Polycarbonate Camber of Case : 1mm max. against entire length (reference) Twist of Case : 0.5mm max. (reference) CERAFILr 455kHz Lead Type SFPLA Series Standard of Magazine Cassette 33 9.00.3 4051.0 7.60.25 8.10.3 100.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note : Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, which ground terminals are all facing toward the "muRata" mark on a magazine, and be closed with exclusive stoppers at the both ends. Above should be the minimum packaging unit. 1.1 1.1 HP51M0003-02 in mm Tolerance unless otherwise specified : 0.2 Material : Polycarbonate Camber of Case : 1mm max. against entire length (reference) Twist of Case : 0.5mm max. (reference) Continued on the following page. 114 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. CERAFILr 455kHz Lead Type CFWLA Series Standard of Magazine Cassette 9.00.3 7.30.25 576.02.0 7.50.3 9.00.3 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35 CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note : Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 4. Dimensions of Magazine Cassette 18.70.3 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with ground terminals all facing toward the "muRata" mark on a magazine, and be closed with exclusive stoppers at the both ends. Above should be the minimum packaging unit. ANTISTATIC muRataHP51M0064 5.30.3 0.6 in mm Tolerance unless otherwise specified : 0.2 Material : Polycarbonate Camber of Case : 1mm max. against entire length (reference) Twist of Case : 0.5mm max. (reference) 3. Magazine should be packaged in a cardboard box. MURATA model name, quantity and outgoing inspection number should be indicated on the box. Cardboard box may contain maximum 33 magazines (1,650 pieces of filter). Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series (o80) (o330) Empty 240-280 min. 400-560 Peeling strength (0.1--0.7N) Cover film +0.1 o1.5 -0.0 8.00.1 10 max. 4.30.1 Chip filter 3 max. 7.50.1 9.00.1 2.20.5 2.00.1 4.00.1 +0.1 2.1-0.05 Empty Components +0.1 o1.5 -0.0 Leader Cover Film 0.30.05 Trailer 40-190 16.00.2 Part Number marked side is always facing up. 1.750.1 Dimensions of carrier tape 2.30.1 Dimensions of Reel o13.00.2 17.51.5 21.50.5 User direction of feed (in mm) Continued on the following page. 33 115 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 4.5-6.5MHz Chip Type TPWKA Series peeling strength o1.5 +0.1 8.00.1 -0.0 (0.1--0.7N) 10 max. Cover film 5.50.1 Chip filter 3 max. 7.50.1 16.00.2 400-560 1.950.1 9.00.1 Empty 240-280 min. 2.00.1 4.00.1 +0.1 1.75 -0.05 (o80) (o330) 2.20.5 o1.5 -0.0 0.30.05 Empty Components +0.1 Leader Cover Film Trailer 40-190 Part Number marked side is always facing up. 1.750.1 Dimensions of carrier tape Dimensions of Reel o13.00.2 17.51.5 21.50.5 User direction of feed (in mm) Continued on the following page. 33 116 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 4.5-6.5MHz Lead Type TPSRA Series P2 P dh dh dS M W1 W0 W L1 H0 W2 M D0 P1 F1 F2 P0 t Direction Feed Item Code Dimensions Lead length under the hold down tape L1 5.0 min. Tolerance Pitch of component P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing (I) F1 2.5 0.2 Lead spacing (II) F2 2.5 0.2 Slant to the forward or backward dh 0 1.0 0.5 Width of carrier tape W 18.0 Width of hold down tape W0 6.0 min. Position of Sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier Tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 P020 254.0 1.5 dS 0 1.0 Total tape thickness Pitch of sprocket hole (II) Body tilt Remarks Tolerance for Pitches 10ZP0=1271 Hold down tape doesn't exceed the carrier tape. The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 117 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 3.5-6.5MHz Lead Type TPSRD Series P2 dh dh P H0 W1 W0 W L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. ------ Pitch of component P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 W 18.0 0.5 Width of hold down tape W0 6.0 min. ------ Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Width of carrier tape Total tape thickness Pitch of sprocket hole (II) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 118 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Trap 3.5-6.5MHz Lead Type TPSRD_W/TPWRD/TPTRD Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 To distinguish the direction Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (I) F 5.0 Lead spacing (II) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (II) t P020 Remarks 3.0 min. Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 119 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P50E.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. 4.70.1 (9.0) +0.1 -0 10 Cover film Part number marked side is always facing up. 3max. Direction of feed (1.7 max.) 2.20.1 Peeling strength 0.1-0.7N 1.10.1 o1.5 0.30.05 4.00.1 12.00.2 +0.1 -0 o1.5 2.00.05 5.50.05 4.00.1 1.750.1 Ceramic Discriminator 10.7MHz Chip Type CDSCB Series (in mm) Continued on the following page. 33 120 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 10.7MHz Lead Type CDALA Series P2 dh dh P H0 W1 W0 W L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. ------ Pitch of component P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 W 18.0 0.5 Width of hold down tape W0 6.0 min. ------ Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Width of carrier tape Total tape thickness Pitch of sprocket hole (II) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 121 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 3.5-6.5MHz CDSRH_EK Series P2 dh dh P H0 W1 W0 W L1 W2 dS1 D0 P1 F t P0 Item Lead length under the hold down tape Code Dimensions Tolerance L1 3.0 min. ------ Pitch of component P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 Lead spacing F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 W 18.0 0.5 Width of hold down tape W0 6.0 min. ------ Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Width of carrier tape Total tape thickness Pitch of sprocket hole (II) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) Continued on the following page. 33 122 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Ceramic Discriminator 3.5-6.5MHz CDSRH_CK Series P2 dh dh P H0 W1 W0 W L2 L1 W2 dS1 F1 F1 P1 D0 F t P0 Item Code Dimensions Tolerance Lead length under the hold down tape L1 Length of cut off L2 2.0 max. Pitch of components P 12.7 0.5 Pitch of sprocket hole (I) P0 12.7 0.2 To distinguish the direction Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 Lead spacing (I) F 5.0 Lead spacing (II) F1 2.5 0.5 +0.5 -0.2 0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 254.0 1.5 Total tape thickness Pitch of sprocket hole (II) t P020 Remarks 3.0 min. Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm) 33 123 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. P50E.pdf 03.4.16 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp