D3899922FW - AMPHENOL - Datasheet.Cloud

DETAIL SPECIFICATION SHEET

CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE,

THREADED, DUMMY STOWAGE, SERIES III, METRIC

This specification is approved for use by all Departments

and Agencies of the Department of Defense.

The requirements for acquiring the product described herein

shall consist of this specification sheet and MIL-DTL-38999.

FIGURE 1. Dummy stowage receptacle, classes F, G, J, K, M, R, S, T, W, X and Z.

AMSC N/A FSC 5935

mm

Inches

0.13

.01

12.40

.49

12.95

.51

14.50

.57

14.73

.58

METRIC

MIL-DTL-38999/22J

1

8 February 2015

SUPERSEDING

MIL

-DTL-38999/22H

14 June 2013

MIL-DTL-38999/22J

Dimensions

Shell

size

Shell size

code

P

± .20

PP

± .20

R1

(see note 4)

R2

(see note 5)

9 A

(see note 8) 3.25

(.128) 5.49

(.216) 18.26

(.719) 15.09

(.594)

9

A1

(see note 6) 3.25

(.128) 5.49

(.216) 18.26

(.719) 15.09

(.594)

9

A2

(see note 7) 3.25

(.128) 5.49

(.216) 18.26

(.719) 15.09

(.594)

11 B 3.25

(.128) 4.93

(.194) 20.62

(.812) 18.26

(.719)

13 C 3.25

(.128) 4.93

(.194) 23.01

(.906) 20.62

(.812)

15 D 3.25

(.128) 4.39

(.173) 24.61

(.969) 23.01

(.906)

17 E 3.25

(.128) 4.93

(.194) 26.97

(1.062) 24.61

(.969)

19 F 3.25

(.128) 4.93

(.194) 29.36

(1.156) 26.97

(1.062)

21 G 3.25

(.128) 4.93

(.194) 31.75

(1.250) 29.36

(1.156)

23 H 3.91

(.154) 6.15

(.242) 34.93

(1.375) 31.75

(1.250)

25 J 3.91

(.154) 6.15

(.242) 38.10

(1.500) 34.93

(1.375)

FIGURE 1. Dummy stowage receptacle, classes F, G, J, K, M, R, S, T, W, X and Z – Continued.

2

MIL-DTL-38999/22J

Dimensions

Shell

size Shell

size

code

S

± .3 V

+ 0.00

- 0.13

V’

+ 1.4

- 0.0

W

± .3 W’

9 A

(see note 8) 23.8

(.937) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 (.144 )

2.2 (.087)

9

A1

(see note 6) 23.8

(.937) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

9

A2

(see note 7) 23.8

(.937) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

11 B 26.2

(1.031) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

13 C 28.6

(1.126) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

15 D 31.0

(1.220) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

17 E 33.3

(1.311) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

19 F 36.5

(1.437) 20.83

(.820) 19.5

(.768) 2.5

(.098) 3.65 / 2.2

(.144 /.087)

21 G 39.7

(1.563) 20.07

(.790) 18.7

(.736) 3.2

(.126) 4.35

/ 2.9

(.171 / .114)

23 H 42.9

(1.689) 20.07

(.790) 18.7

(.736) 3.2

(.126)

4.35 / 2.9

(.171 / .114)

25 J 46.0

(1.811) 20.07

(.790) 18.7

(.736) 3.2

(.126)

4.35 / 2.9

(.171 / .114)

NOTES:

1. Dimensions are in milli meters. Inch equival ents are given for information only.

2. Flange is solid.

3. Dummy receptacles are used when unm at ed pl ugs must be protected.

4. Dimensions required for intermountab i l i t y with front or rear mounting series I.

5. Dimensions required for intermountab i l i t y with front mounting se ries II.

6. Shell size code A1 is for use with size 9 plug mating key polariz ations C, E and N, only.

7. Shell size code A2 is for use with size 9 plug mating key polarizations A, B and D, only.

8. Shell size code A (inactive for new design) is for use with legacy s ystems with size 9 plug mating

key polarizations A, B, C, D, E and N.

FIGURE 1. Dummy stowage receptacle, classes F, G, J, K, M, R, S, T, W, X and Z – Continued.

3

MIL-DTL-38999/22J

SHELL SIZE 9, SHELL SIZE CODE A

FIGURE 2. Dummy stowage receptacle, keyway arrangements, classes F, G, J, K, M, R, T,

S, W, X and Z (shell size 9).

SHELL SIZE 9 (SHELL SIZE CODE A,

UNIVERSAL CONFIGURATION FOR

MATING TO PLUGS WITH K EY

POLARIZATIONS A, B, C, D, E AND N

(INACTIVE FOR NEW DESIGN))

4

MIL-DTL-38999/22J

SHELL SIZE 9, SHELL SIZE CODE A1

FIGURE 2. Dummy stowage receptacle, keyway arrangements, classe s F , G , J, K, M, R, T,

S, W, X and Z (shell size 9).

5

MIL-DTL-38999/22J

SHELL SIZE 9, SHELL SIZE CODE A2

NOTES:

1. Dimensions are in millimeters.

2. Inch equivalents are given for information only.

FIGURE 2. Dummy stowage receptacle, keyway arrangements, classes F, G, J, K, M, R , T,

S, W, X and Z (shell size 9) - Continued.

6

MIL-DTL-38999/22J

SHELL SIZES 11, 13 AND 15

Shell

size

Shell

size code

A

dia

B

dia

11 B 15.88/15.60 (. 625/.614) 14.66/14.45 (.577/.569)

13

C

19.66/19.38 (. 774/.763)

17.50/17.30 (.689/.681)

15

D

22.84/22.56 (. 899/.888)

20.65/20.44 (. 813/.805)

NOTES:

1. Dimensions are in millimeters.

2. Inch equivalents are given for information only.

FIGURE 3. Dummy stowage receptacle, keyway ar rangement, cla sses F, G, J, K, M, R, S, T, W, X

and Z (shell sizes 11, 13 and 15).

7

MIL-DTL-38999/22J

SHELL SIZES 17, 19, 21, 23 AND 25

Shell

size

Shell

size code

A

dia

B

dia

17

E

26.01/25.73 (1. 024/1.013)

23.85/23.64 (. 939/.930)

19

F

28.63/28.40 (1. 127/1.118)

26.55/26.31 (1. 045/1.036)

21

G

31.85/31.57 (1.254/1.243)

29.70/29.49 (1. 169/1.161)

23

H

35.03/34.75 (1. 379/1.368)

32.85/32.66 (1. 293/1.286)

25

J

38.20/37.92 (1. 504/1.493)

36.00/35.84 (1. 417/1.411)

FIGURE 4. Dummy stowage receptacle, keyway arrangement, classes F, G, J, K, M, R, S, T, W, X

and Z (shell sizes 17, 19, 21, 23 and 25).

8

MIL-DTL-38999/22J

REQUIREMENTS:

Dimensions and conf i gurations: See figures 1 th ru 4. Interface dimensions shall conform to

MIL-DTL-38999, except as noted.

This dummy stowage rec eptacle (DSR) mat es with qualified plugs in accordance with

MIL-DTL-38999/26, MIL-DTL-38999/29, MIL-DTL-38999/30, and MIL-DTL-38999/31.

Air leakage: Testing shall be in accordance with EIA -364-02, except the minimum period of

measurement shall be 10 seconds. The air leakage rate shall be no greater than 1 atmospheri c cubic

inch per hour (4.55 X 10-3 cm3/s) Stowage receptacles shall be mated to connectors having either

contacts or inserts removed so that a pressure of 10 lbft /in2 (.703 Kg/cm2 ) can be applied against the

insides of the stowage receptacles.

Qualification (all classes): Qual ification shall be in accordance with MIL-DTL-38999, conducted on two

samples of each shell size, ex cept only the following sequen ce of tests shall be required:

Examination of product

Coupling torque

Dynamic salt spray (corro sion)

Air leakage (see requirem ent)

Visual and mechanical

Qualification (clas ses J and M only): Qualificati on shall be in accordance with MIL-DTL-38999, except

that in addition t o t he t est sequence specified for all classes above, the f ol l owing tests shall be required:

Temperature cyclin g

Hydrolytic stability

Group A sampling in spection. Sampling for group A inspection shall be as specified in table I.

TABLE I. Group A sampling plan.

Lot size Sampling size

1 to 13 100 percent

14 to 150 13 units

151 to 280 20 units

281 to 500 29 units

501 to 1,200 34 units

1,201 to 3,200 42 units

3,201 and up 54 units

9

MIL-DTL-38999/22J

Part or Identifying Number (P IN) example:

D38999/ 22 B W

DoD number prefix

Specification sheet number

Shell size code

(for shell size codes A, A1 and A2, see note)

Class

NOTE: Shell size codes A, A1 and A2 for shell size 9 only:

• Shell size code A is a univ ers al configuration for us e with plugs with mating key

polarizations A, B, C, D, E and N.

• Shell size code A1 is for use with plugs with mating key polarizations C, E or N.

• Shell size code A2 is for use with plugs with mating key pol arizations A, B or D.

NOTE: The term PIN is equivalent to the term (part number, identification num ber, and type

designator) which was previously used in this specification.

Application not e:

1. Shell size 9, shell si ze code A (universal c onfiguration), is not recommended for blind mate

applications due t o t he possibility for misalignment between the DSR keyways and the plug key s.

Misalignment can potentially damage plug EMI bands.

Change effectivity. Unless otherwise specified by the preparing activity and/or the qualifying activity, all

changes from the prev i ous revision of this specification sheet shall become effective withi n 90 days of the

date of publicati on of the latest revision. If unable to implement changes within the 90 day t i me period,

the manufacturer or val ue added distributor shall notify the qual ifying activity. The qualifyi ng activity shall

determine if an ext ension may be granted.

Disposition of stock. Unless otherwise specified by the qualify ing activity and coordinated with the

preparing activity, qualified manufacturer s and their selling agent s or distributors may continue t o

ship stowage receptacles w hich were manuf actured in accordan ce wi th the previous revision of this

specification sheet for a period of 18 months from the date of the latest rev ision, provided t hat form, fit

and function are not affected.

Changes from previous issue. The margin s of this specification are marked with vertical lines to indicate

where changes from t he previous issue were made. This was done as a convenience only and t he

Government as sumes no liability whatsoever for any inaccu racies in these notations. B i dders and

contractors are cauti oned to evaluate the requirements of t hi s doc um ent based on the entire content

irrespective of the marginal notations and relationship to the last previous issue.

Class F is not for Navy use. Class F is inactive for use in Air Force new design.

Shell size code A (shell size 9) is inactive for new design. Use shell size codes

A1 or A2 for new design.

10

MIL-DTL-38999/22J

Referenced documents. In addition to MI L-DTL-38999, this document references the following:

MIL-DTL-38999/26

MIL-DTL-38999/29

MIL-DTL-38999/30

MIL-DTL-38999/31

EIA-364-02

CONCLUDING MATERIAL

Custodians: P reparing activity :

Army - CR DLA - CC

Navy - AS

Air Force – 85 (Project 5935-2015-031)

DLA - CC

Review activities:

Army - AR, MI

Navy - EC, MC, OS

Air Force - 19, 99

NOTE: The activities listed above were interested i n this document as of t he date of this document.

Since organizations and responsibilities can change, you shoul d verify the currency of t he information

above using the ASSIST Online database at https://assist.dla.mil.

11