DO NOT
SCALE FROM
THIS PRINT
0.800 .0315
(TOL NON-ACCUM)
"D"
6.25 .246
REF
0.30 .012
REF
60
59
02
01
C
C
ERM8-XXX-XX-X-D-RA-XX-TR
No OF POSITIONS (PER ROW)
-010,-011,-013, -020, -025
-030, -037, -040, -049, -050
-060, -070, -075
ROW SPECIFICATION
-D: DOUBLE (USE ERM8-XXX-01-D-RA)
LEAD STYLE
-01: 1.58 [0.062] BOARD
-03: 2.36 [0.093] BOARD
-RA: RIGHT ANGLE
TAPE & REEL OPTION
-TR : TAPE & REEL
(STANDARD PACKAGING)
(SEE NOTE 4)
OPTION
-K: PAD
(USE K-500-300)
-L: ESD LATCHES (SEE TABLE 4
FOR AVAILABILITY)
-DS: DIFFERENTIAL PAIR (HOT
SWAP)(SEE FIG 2 SHT 7)
(SEE TABLE 4 FOR
AVAILABILITY)
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE T-1MXX-01-S, T-1MXX-02-S)
(SEE TABLE 6, SHT 7)
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE T-1MXX-01-L, T-1MXX-02-L)
(SEE TABLE 6, SHT 7)
0.800 .0315
(TOL. NON-ACCUM)
"F"
"B"
2.08
(TYP)
.082
(SEE NOTE 6)
8.00 .315
REF
1.10 .043
REF
4.00 .157
REF
1.32 .052
REF
"E" REF (ALIGNMENT PIN CENTERS)
59 01
60 02
C
C
C
FIG 1
ERM8-030-01-S-D-RA-L
C
C
L
5.02 .197
REF
5.75
REF
.226
(TYP)
"A" REF
11.00 .433
REF
4.36 .172
REF
"B"
"C"
(SEE NOTE 6)
C
L
C
L
ERM8-XXX-01-D-RA
C
WT-35-XX-X
(SEE TABLE 6, SHT 7)
WT-35-XX-X
(SEE TABLE 6,
SHT 7)
C
0.35 .014
REF
6.12 .241
(REF)
1.57 .062
REF
"J"
1.00 .039
REF
1.32
REF
.052
"H"
(SEE NOTE 9)
C
C
DESIGNED & DIMENSIONED IN MILLIMETERS [INCHES]
TABLE 4
POSITION
-DS & -L
OPTION
AVAILABILITY
-010
-L
-011
-L
-013
-DS, -L
-020
-L
-025
-DS, -L
-030
-L
-037
-DS, -L
-040
-L
-049
-DS, -L
-050
-L
-060
-L
-070
-L
-075
-L
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.050 [.0020]
MATERIAL:
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
1
SHEET SCALE: 2:1
INSULATOR: LCP UL94V-0, COLOR BLACK
CONTACTS: PHOS BRONZE
COUNTERWEIGHT: BRASS
LATCHES: BeCu
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .02[0.001] MAX.
3. MINIMUM PUSHOUT /PULLOUT FORCE: SIGNAL: 2.22 N [.5 LB],
LATCH AND COUNTERWEIGHT: 4.45 N [1 LB].
4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR EIA-481-D
REEL TO BE SUPPLIED. FOR QUANTITIES FROM 50-124 PIECES, NO LEADER
OR TRAILER WILL BE SUPPLLIED.
5. MEASURE AT BEND TANGENCY.
6. APPLIES TO -L OPTION ONLY.
7. MAXIMUM CUT BURR ON CUT TAILS IS 0.10[.004].
8. DIMENSIONS MUST BE MEASURED BOTH ENDS OF COMB OR CONNECTOR.
9. USE -Z- DATUM ZONE FOR MEASUREMENT ONLY.
10. USE INSPECTION FIXTURE #AT-2304-801-02 TO CHECK TAIL CRITICALS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION V
0.13 .005
6.38 .251
-K: PAD
ERM8-030-01-X-D-RA-L-K SHOWN
(USE K-500-300)
6.00 .236
1.88 .074
"G"
±0.51
(SEE TABLE 3)
0.35 .014
REF
0.64
±0.20
.025
±.008
3.27
±0.10
.129
±.004
5.02
±0.10
.198
±.004
3.20
±0.05
.126
±.002
8.00 .315
0.92
±0.08
(TYP)
.036
±.003
2.23 .088
REF
3.55
REF
.140
C
C
C
C
C
ERF8-RA-XXX
T-1R37-XX-T
(SEE TABLE 6, SHT 7)
T-1M52-01-X
T-1M52-02-X
C
'K'
'J'
(LOCATE ASSY ON DATUM -C- FOR MEASURMENT)
SEE TABLE 2
TOP ROW, BOTTOM ROW
-C-
0.10
±0.08
.004
±.003
(SEE NOTE 5 & 9)
C
DETAIL 'J'
BOTTOM ROW TAIL
(LOCATE ASSY ON DATUM -C- FOR MEASUREMENT)
0.10
±0.08
.004
±.003
(SEE NOTE 5 & 9)
C
DETAIL 'K'
TOP ROW TAIL
(LOCATE ASSY ON DATUM -C- FOR MEASUREMENT)
SHEET OF
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
2
SHEET SCALE: 8:1
REVISION V
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
T-1M52-02-X
T-1M69-02-X
1.450 .0571
(SEE NOTE 8)
R
0.35 .014
90°
-
3°
+
0°
(SEE NOTE 8)
0.35 .014
MEASUREMENT
LOCATION FOR C18
0.55 .022
SKEW DATUM
POINT FOR C18
0.70 .028
SKEW MEASUREMENT
POINT FOR C18
IN-PROCESS 1
(FORM 1 TERMINAL T-1M52-02-X & T-1M69-02-X)
C
C
-D-
D1
D2
R
0.350 .0138
(2 PLCS)
2°
-
2°
+
1°
(SEE NOTE 8)
1.450 .0571
(SEE NOTE 8)
1.80
±0.10
.071
±.004
(SEE NOTE 8)
1.950
±0.08
.0768
±.003
(SEE NOTE 5 & 8)
0.35 .014
MEASUREMENT
LOCATION FOR C18
0.55 .022
SKEW DATUM
POINT FOR C21
0.70 .028
SKEW MEASUREMENT
POINT FOR C21
IN-PROCESS 2
(FORM 2 TERMINAL T-1M52-02-X & T-1M69-02-X)
C
C
C
C
-D-
D1
D2
R
0.350 .0138
3.199 .1259
(SEE NOTE 8)
90°
+
-
0°
3°
(SEE NOTE 8)
0.50 .020
MEASUREMENT
LOCATION FOR C26
2.30 .091
SKEW DATUM
POINT FOR C26
0.70 .028
SKEW MEASUREMENT
POINT FOR C26
IN-PROCESS 6
(FORM 1 TERMINAL T-1M52-01-X & T-1M69-01-X)
C
C
-E-
E2
E1
R
0.350 .0138
R
0.350 .0138
3.199 .1259
(SEE NOTE 8)
5.150
±0.08
.2028
±.003
(SEE NOTE 5 & 8)
90°
-
3°
+
0°
(SEE NOTE 8)
0.70 .028
SKEW MEASUREMENT
POINT FOR C29
2.30 .091
SKEW DATUM
POINT FOR C29
0.50 .020
MEASUREMENT
LOCATION FOR C27
2°
+
-
2°
1°
(SEE NOTE 8)
IN-PROCESS 7
(FORM 2 TERMINAL T-1M52-01-X & T-1M69-01-X)
C
C
C
C
C
-E-
E2
E1
T-1M69-01-X
T-1M52-01-X
0.25 .010
3
MAX SWAY
T-1M52-XX-X
IN-PROCESS VIEW
0.25 .010
T-1M69-XX-X
IN-PROCESS VIEW
3
MAX SWAY
SHEET OF
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
3
SHEET SCALE: 4:1
REVISION V
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
2.35
REF
.093
0.10
REF
.004
T-1M52-02-X
IN-PROCESS 3
(FILL BOTTOM ROW)
(SEE INSPECTION VIEW 1 FOR ASSEMBLY ORIENTION AND CPC'S)
-C-
3.27
REF
.129
0.10
REF
.004 0.92
REF
.036
SHEAR CARRIER
IN-PROCESS 4
(CUT OFF CARRIER)
(SEE INSPECTION VIEW 1 FOR ASSEMBLY ORIENTION AND CPC'S)
-C-
SEE TABLE 2, SHT 2
WITHIN ROW
4.10 .161
0.65 .026
REF
C
IN-PROCESS 5
FILL ERF8-RA-XXX
ERF8-RA-XXX
-C-
3.27
±0.10
.129
±.004
(SEE NOTE 8)
0.92
±0.08
.036
±.003
(SEE NOTE 8)
2.35
±0.08
.093
±.003
(SEE NOTE 8)
C
C
C
-C-
Z2 Z1
'C'
'D'
0.10
±0.08
.004
±.003
(SEE NOTE 5,8 & 9)
DETAIL 'C'
SCALE 8 : 1
C
Z2
0.10
±0.08
.004
±.003
(SEE NOTE 5,8 & 9)
DETAIL 'D'
SCALE 8 : 1
C
C
SEE TABLE 2, SHT 2
Z1
INSPECTION FOR IN-PROCESS 3 & 4
(CARRIER NOT SHOWN FOR IN PROCESS 3 INSPECTIONS)
INSPECTION VIEW 1
(SEE NOTE 10)
SHEET OF
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
4
SHEET SCALE: 4:1
REVISION V
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
4.10
REF
.161
0.10
REF
.004
HEAT STAKE
TOP ROW TAILS
IN-PROCESS 9
(HEAT STAKE TOP ROW OF CONTACTS)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTION AND CPC'S)
-C-
3.20
±0.05
.126
±.002
4.10
REF
.161
0.10
REF
.004
T-1M52-01-X
C
IN-PROCESS 8
(FILL TOP ROW)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTION AND CPC'S)
-C-
5.02
REF
.198
0.92
REF
.036
0.10
REF
.004
IN-PROCESS 10
(CUT OFF CARRIER)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTION AND CPC'S)
SHEAR CARRIER
-C-
SEE TABLE 2, SHT 2
5.02
±0.10
.198
±.004
(SEE NOTE 8)
0.92
±0.08
.036
±.003
(SEE NOTE 8)
4.10
±0.08
.161
±.003
(SEE NOTE 8)
C
C
C
-C-
Z2 Z1
'E'
'F'
0.10
±0.08
.004
±.003
(SEE NOTE 5,8 & 9)
DETAIL 'E'
SCALE 8 : 1
C
Z2
0.10
±0.08
.004
±.003
(SEE NOTE 5,8 & 9)
DETAIL 'F'
SCALE 8 : 1
C
C
SEE TABLE 2, SHT 2
Z1
INSPECTION FOR IN-PROCESS 8, 9 & 10
(CARRIER NOT SHOWN FOR IN PROCESS 8 INSPECTIONS)
INSPECTION VIEW 2
(SEE NOTE 10)
SHEET OF
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
5
SHEET SCALE: 2:1
REVISION V
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
D"
WT-35-XX-X
(SEE TABLE 6, SHT 7)
WT-35-XX-X
(SEE TABLE 6, SHT 7)
C
IN-PROCESS 11
FILL WT-35-XX-F
(ERM8-030-01-S-D-RA SHOWN)
0.15
REF
.006
2.23
REF
.088
C
D"
'G'
'H'
IN-PROCESS 11
FILL WT-35-XX-F
(ERM8-030-01-S-D-RA-L SHOWN)
WT-35-XX-X
(SEE TABLE 6, SHT 7)
C
WT-35-XX-X
(SEE TABLE 6, SHT 7)
2.23 .088
C
"J"
8.00
REF
.315
IN-PROCESS 12
FILL T-1R37-XX-T
(SEE TABLE 6, SHT 7)
T-1R37-XX-T
(SEE TABLE 6, SHT 7)
C
2.08 .082
(SEE NOTE 6)
C
8.00 .315
C
"H"
(SEE NOTE 9)
DETAIL 'G'
SCALE 4 : 1
C
"H"
(SEE NOTE 9)
DETAIL 'H'
SCALE 4 : 1
C
SHEET OF
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
6
SHEET SCALE: 2:1
REVISION V
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
"A"
"A"
"B"
"B"
GROUND PIN
(GROUND PINS MUST BE IN FIRST
AND LAST POSITONS)
SIGNAL PINS
GROUND PIN
ERM8-XXX-01-D-RA
T-1M69-XX-X
0.62 .024
(GROUND PINS)
SECTION "A"-"A"
SCALE 3 : 1
C
C
C
1.35 .053
(SIGNAL PINS)
3.200 .1260
SECTION "B"-"B"
SCALE 3 : 1
C
C
FIG 2
ERM8-025-01-X-D-RA-DS-L SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
T-1M69-01-X
T-1M69-02-X
SHEET OF
.80mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
BY:
ERM8-XXX-XX-X-D-RA-XX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
C. PIERCE
8/17/2007
7
7
SHEET SCALE: 2:1
REVISION V
F:\DWG\MISC\MKTG\ERM8-XXX-XX-X-D-RA-XX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
