SB600 Series Description Applications * Rack and panel connector * High density up to 800 signal contacts * Low insertion force contact design (tapered pin, lif socket) * Sealed and unsealed versions * Multiple polarizing positions * Field replaceable thermoset inserts, featuring .006 in true position of contact cavities * Choice of front and rear removable contacts * Contacts : signal, power, coaxial, triaxal, filter, optical fiber and waveguide connection contacts * Wide range of high performance rack applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Electrical Mechanical * dielectric withstanding voltage material aluminum shells alloy to QQ-A-591 insulator epoxy resin thermoset seals and fluorinated grommets silicon to MIL-R-25988 copper contacts alloy to QQ-B-626 finish alodine 1200 passivation to MIL-C 5541 class 1 sea level 15 000 m * endurance : 500 matings * insertion and extraction forces max : shell size 1 : 120N (27 lbs) shell size 2 : 267N (60 lbs) shell size 3 : 467N (105 lbs) * vibration : 8 hours in each axis. Random vibration at 16.4 g Rms from 50 to 2000 Hz. MIL-STD-1344 A method 2005-1 * dynamic shock : 3 impacts of 50 g in all axis, duration 11s (half wave) to MIL-STD-202 method 213 mated unmated 1 500 Vrms 0 500 Vrms 1 500 Vrms 0 500 Vrms * voltage rating : 500 Vac Max 125 Vac at 21 000 m * insulation resistance : 5000 M * current ratings, continuous : contact gold plated to MIL-G-45204 over nickel to QQ-N-290 Climatic 22 20 16 12 wire gauge current (A) 22 24 26 20 22 24 16 12 5 3 2 7,5 5 3 13 23 voltage drop max (mV)* 40 30 25 55 40 30 50 45 * Temperature rating : -65C to +125C for both classes, sealed and unsealed * Fluid resistance : hydraulic to MIL-H 5606 lubricating to MIL-L 23699 - isopropyl alcohol * Resistance to salt spray : 48 hours MIL-STD-202 method 101 or MIL-STD-1344 method 1001 * Sealing : environment resistant (sealed version) * measured over a conductor length of 150 mm * triaxial contact size 8 bandwidth : 0-20 MHz - voltage rating : 500 Vac Max 125 Vac at 21 000 m - voltage drop : inner and middle contact 55 mV under 1A - outer contact 75 mV under 12A Ordering information SB6 0 basic series class 0 1 2 3 A 2 M G 13 W2 P 00 01 AN - sealed unsealed semi-environmental (without O-ring) semi-environmental (without O-ring and compound) plug semi-environmental (without O-ring and compound) with RFI shielded (only shell size 2 - 3) B - unsealed plug with RFI shielded (only shell size 2 - 3) D - unsealed with grounding fingers shell size shell style 1 -2-3 series G - rear release signal and power contacts H - front release signal contacts (PC and WW terminations female) and rear release power contacts mounting styles (see schedule n1) p 159 insert arrangement code style of signal contacts M- rack plug F - equipment receptacle - in cavities C and F (see schedule n2 p 159) P - # 22 - male (rack plug) S - # 22 - female (equipment receptacle) insert arrangement code - in cavities A-B-D-E (see schedule n3 p 159) polarization code (see schedule n5 p 160) connector packaging code (see schedule n4 p 159) 157 SB600 Series Contact arrangements in shells Contact layouts - assembly alternative Front face of female insulator - equipment receptacle M: rack plug F: equipment receptacle shell size 1 60 size 22 signal contacts male female power contacts female male coaxial and triaxial contacts female male dummy signal insert 60 size 22 dummy power insert 2 size 16, 1 size 12 2 coaxial contact size 5 Contact layouts - assembly alternative Front face of female insulator - equipment receptacle 150 size 22 shell size 2 70 size 22 1 coaxial contact size 1 10 size 22 10 size 16 8 triaxial contacts size 8 4 coaxial contacts size 1 2 coaxial contacts size 1 dummy signal insert 150 size 22 4 size 20, 3 size 16 4 size 12, 2 coaxial contacts size 5 80 size 22 4 size 20 1 size 16 100 size 22 dummy power insert shell size 3 dummy signal insert 2 coaxial contacts size 1 10 size 22 10 size 16 8 triaxial contacts size 8 150 size 22 150 size 22 4 coaxial contacts size 1 70 size 22 1 coaxial contact size 1 A D 70 size 22 1 coaxial contact size 1 4 coaxial contacts size 1 150 size 22 150 size 22 B dummy power insert 4 size 20 - 3 size 16 4 size 12 2 coaxial contacts size 5 80 size 22 4 size 20 1 size 16 100 size 22 C 158 E 80 size 22 4 size 20 100 size 22 1 size 16 F dummy power insert 10 size 22 10 size 16 8 triaxial contacts size 8 2 coaxial size 1 dummy signal insert SB600 Series Schedule n1 mounting styles 05 13 FL FN FS FT LN SL TL TN - standard mounting shell size 1 standard mounting shell size 2 and 3 float mounts 4, 6-32 eyelet float mounts 4, 6-32 self-locking threaded inserts float mounts 4, 4-40 self-locking threaded inserts float mounts 4, 4-40 6-32 self-locking threaded inserts see note 4-40 self-locking threaded inserts 4-40 self-locking threaded inserts in all holes 6-32 self-locking threaded inserts } } Note : shells numbers of inserts receptacle 1 2 3 1 4 4 6 10 plug 2 3 4 8 Schedule n2 insert arrangements power cavities C and F W200 01 02 03 K1 K2 K3 K4 K5 K9 A2 A3 - standard power insert (rear contact release), shell sizes 1-2-3 shell size 1,2 - cavity C dummy insert shell size 3 - cavities C and F dummy insert shell size 3 - cavity C standard insert and cavity F dummy insert shell size 3 - cavity C dummy insert cavity F standard insert shell size 3 - cavities C and F fitted with inserts for 100 size 22 contacts shell size 3 - standard power insert in cavity C plus 100 size 22 signal insert in cavity F shell size 3 - 100 size 22 signal insert in cavity C plus standard power insert in cavity F shell size 2 - cavity C empty shell size 2 - cavity C 100 size 22 signal contact insert shell size 2 - cavity C 100 size 22 signal contact insert rear release (A and B, insert front release) shell size 3 - cavity F empty, cavity C standard insert shell size 3 - cavity F dummy insert, cavity C standard insert Schedule n3 insert arrangements signal cavities A, B, D, E 00 - standard signal inserts, shell sizes 1-2-3 01 - shell size 2 - cavities A and B fitted with inserts for 70 size 22 plus 1 size 1 contacts 02 - shell size 2 - standard signal insert in cavity A plus 70 size 22 plus 1 size 1 contact insert in cavity B 03 - shell size 2 - 70 size 22 plus 1 size 1 insert in cavity A plus standard signal insert in cavity B 04 - shell size 2 - cavity A empty and 70 size 22 plus 1 size 1 insert in cavity B 05 - shell size 3 - cavity A and B 2 size 1 insert cavity E standard insert and cavity D empty 07 - shell size 2 - cavity A dummy insert and cavity B 70 size 22 plus 1 size 1 insert 08 - shell size 3 - cavities A, B, D and E 70 size 22 plus 1 size 1 insert 09 - shell size 3 - cavities A, B, D standard insert cavity E 70 size 22 plus 1 size 1 insert A1 - shell size 2 A2 - shell size 2 same arrangements as 01, 02 and 03 but with size 1 coaxial contact body fitted A3 - shell size 2 E1 - shell size 2 - cavities A and B empty E2 - shell size 2 - standard signal insert in cavity A, cavity B empty E3 - shell size 2 - cavity A empty, standard signal insert in cavity B E5 - shell size 2 - cavity A empty, cavity B triaxial size 8 insert E6 - shell size 2 - cavity A 2 size 1 insert, cavity B70 size 22+1 size 1 insert E7 - shell size 3 - cavities A, B, D 2 size 1 insert cavity E standard insert F2 - shell size 2 - cavity A standard insert cavity B waveguide F3 - shell size 2 - cavity A waveguide cavity B standard insert H1 - shell size 2 - cavity A and B triaxial size 8 inserts H2 - shell size 2 - cavity A standard insert cavity B triaxial size 8 insert H3 - shell size 2 - cavity A triaxial size 8 insert cavity B standard insert } HA - shell size 3 - cavities A, B, D standard insert cavity E triaxial size 8 insert HB - shell size 3 - cavities A, B, E standard insert cavity D triaxial size 8 insert HC - shell size 3 - cavities A, B standard insert cavities D, E triaxial size 8 insert HD - shell size 3 - cavities A, D, E standard insert cavity B triaxial size 8 insert HE - shell size 3 - cavities A, D standard insert cavities B, E triaxial size 8 insert HF - shell size 3 - cavities A, E standard insert cavities B, D triaxial size 8 insert HG- shell size 3 - cavity A standard insert cavities B, D, E triaxial size 8 insert HH - shell size 3 - cavities B, D, E standard insert cavity A triaxial size 8 insert HJ - shell size 3 - cavities B, D standard insert cavities A, E triaxial size 8 insert HK - shell size 3 - cavities B, E standard insert cavities A, D triaxial size 8 insert HL - shell size 3 - cavity B standard insert cavities A, D, E triaxial size 8 insert HM - shell size 3 - cavities D, E standard insert cavities A, B triaxial size 8 insert HN - shell size 3 - cavity D standard insert cavities A, B, E triaxial size 8 insert HP - shell size 3 - cavity E standard insert cavities A, B, D triaxial size 8 insert HQ- shell size 3 - cavities A, B, D, E triaxial size 8 insert L1 - shell size 1-2 - cavity A and B dummy insert L2 - shell size 1-2 - cavity A standard insert, cavity B dummy insert L3 - shell size 1-2 - cavity A dummy insert, cavity B standard insert Schedule n4 packaging code (not applicable to connectors where no contacts are specified) 1st letter signal and power contacts A - connector plus full complement of signal and power contacts, crimp termination B - connector supplied only with signal crimp contact unmounted C - connector supplied with W.W signal contact (L = 12,7 mm) mounted in insulator and without power contacts D - connector plus full complement of WW signal contacts (L = 9,52 mm) and crimp power contacts. Wire wrap and power contacts are delivered unmounted E - connector plus full complement of mounted P C signal contacts (L = 6,35 mm) and crimp power contacts. Straight spill contacts are supplied mounted. Power contacts are supplied unmounted I - connector supplied with straight spill contacts (L = 3,81 mm) and crimp power contacts straight spill contacts are supplied mounted and power contacts are supplied unmounted L - connector without either signal or power contacts 2nd letter size 1 and size 5 coaxial contacts N - connector without either size 1 or size 5 coaxial contacts A - connector plus size 5 coaxial contacts for RG 58C/U cable plus size 1 coaxial contacts for RG 165/U and RG 225/U cables. (body and termination kit). Coaxial size 5 supplied unmounted. Size 1 supplied mounted or unmounted, as per schedule n3 C - shell size 2-3 - connector supplied with straight size 1 coaxial contact for UT 141-RG 402 B/U cable, contact supplied unmounted B - shell size 2-3 - connector supplied with straight size 1 coaxial contacts for RG 141A/U RG 142 B/U-KX 23 cable, contact supplied unmounted D - connector plus size 5 coaxial contacts for 5021 K 1011 cable S - shell size 2-3 - connector plus size 1 coaxial contacts for suffix E9 Note : Do not use the suffix L and N together 159 SB600 Series Schedule n5 polarization Rack plug Equipment receptacle 00 polarizing key delivered unmounted position L.H. key centre key R.H. key 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 160 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 6 6 6 6 6 6 5 5 5 5 5 5 4 4 4 4 4 4 3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 1 1 6 6 6 6 6 6 5 5 5 5 5 5 4 4 4 4 4 4 3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 1 1 6 6 6 6 6 6 5 5 5 5 5 5 4 4 4 4 4 4 4 3 3 00 polarizing eye delivered unmounted position L.H. key centre key R.H. key 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 1 1 1 1 1 1 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 Right hand key Left hand key Location of polarizing keys (view of engaging face) 1 2 3 4 5 Black area represents key position Polarizing post rack plug key Polarizing post equipment receptacle key 6 SB600 Series Dimensions of shell size 1 Rack plug Panel cut-out 35.61 Max 4.78 / .188 4.67 / .184 1.402 30.23 / 1.190 29.97 / 1.180 4.85 / .191 4.80 / .189 16.51 / .650 3.84 / .151 O 3.68 / .145 4.57 / .180 O 4.22 / .166 R0.762 Max .030 27.99 Max 6.350 161.29 6.890 175.00 min 166.22 / 6.544 165.71 / 6.524 .120 28.19 / 1.110 27.69 / 1.090 4.78 / 1.188 4.67 / 1.184 Equipment receptacle 29.21 min 1.150 .380 / .395 / .365 / .205 / .195 / .130 / .120 / .065 / .055 R3.05 Max 9.65 9.78 9.27 5.21 4.95 3.30 3.05 1.65 1.40 16.64 / .655 16.38 / .645 14.10 / .555 13.59 / .535 9.78 / .385 9.53 / .375 3.43 / .135 3.18 / .125 64.01 / 2.520 63.50 / 2.500 117.67 176.91 161.42 161.18 / 6.995 / 6.965 / 6.355 / 6.345 Six threaded Insert for screw 167.00 / 6.575 166.50 / 6.555 1.102 5.207 .205 Panel cut-out 39.50 Max / 1.555 38.89 Max / 1.531 31.01 Max / 1.221 4.78 / .188 4.67 / .184 3.84 / .151O 3.68 / .145 1.65 / .065 1.40 / .055 25.65 / 1.010 25.15 / 1.990 4.78 / .188 4.67 / .184 4.85 / .191 4.80 / .990 16.51 / .650 4.57 / .180 O 4.22 / .166 R 7.29 Max 16.64 / .655 16.38 / .645 6.350 R 3.05 Max 23.11 / .910 22.61 / .890 23.62 min .930 5.207 .360 3.30 / .130 3.05 / .120 21.59 / .850 21.34 / .840 33.45 Max 9.14 .120 9.78 / .385 9.27 / .365 13.59 / .535 13.08 / .515 4.78 / .188 4.67 / .184 161.29 .240 6.10 Max 6.870 174.50 min 146.69 / 5.775 146.43 / 5.765 52.96 / 2.085 52.71 / 2.075 44.58 / 1.755 44.32 / 1.745 6.310 6.290 6.005 5.995 / / / / 160.27 159.77 152.53 152.27 10 vis M 2.5 .287 2.92 / .115 2.67 / .105 161.42 / 6.355 161.18 / 6.345 9.27 / .365 9.07 / .355 189.36 / 7.455 188.60 / 7.425 3.18 / .125O 2.92 / .115 .205 1.317 35.89 / 1.413 35.38 / 1.393 161 SB600 Series Dimensions of shell size 2 Rack plug Panel cut-out 35.61 Max 1.402 3.84 / .151 O 3.68 / .145 36.22 30.23 / 1.190 29.97 / 1.180 27.99 Max 1.426 16.51 4.78 / .188 4.67 / .184 1.102 .650 4.57 O / .180 4.22 / 0.166 R 0.762 Max R 3.05 Max 45.97 / 1.810 45.47 / 1.790 16.64 16.38 36.35 36.09 / / / / .655 .645 1.431 1.421 4.85 / .191 4.80 / .189 .380 / .065 / .056 / .130 / .120 9.65 1.65 1.40 3.30 3.05 9.78 / .385 9.53 / .375 .120 7.44 / .293 7.19 / .283 3.15 / .124 3.05 / .120 6.350 161.29 6.890 175.00 min 54.23 / 2.135 53.98 / 2.125 161.42 / 6.355 161.18 / 6.345 166.22 / 6.544 165.71 / 6.524 3.43 / .135 3.18 / .125 6.32 / .249 6.22 / .245 5.87 / .231 5.61 / .221 177.67 / 6.995 176.91 / 6.965 169.24 / 6.663 168.99 / 6.653 .030 5.207 .205 46.99 min 1.850 Equipment receptacle Panel cut-out 38.89 Max 1.531 4.78 / .188 4.67 / .184 31.01 Max 36.22 1.426 16.51 3.84 / .151 O 3.68 / .145 1.221 .650 4.57 / .180 O 4.22 / .166 33.45 Max 1.317 162 4.85 / .191 4.80 / .189 38.86 min 1.530 2.130 .120 54.10 R 3.05 Max .240 6.10 Max 174.50 min / 6.870 70.61 Max / 2.780 55.88 min / 2.200 6.350 45.97 / 1.810 45.47 / 1.790 161.29 3.30 / .130 3.05 / .120 6.60 / .260 5.84 / .230 .360 1.65 / .065 1.40 / .055 0.180 9.14 / .655 / .645 / 1.431 / 1.421 6.93 / .273 6.68 / .283 16.64 16.38 36.35 36.09 2.92 / .115 2.67 / .105 11.68 / .460 11.43 / .450 166.22 / 6.544 165.71 / 6.524 54.23 / 2.135 53.98 / 2.125 161.42 / 6.355 161.18 / 6.345 9.27 / .365 9.02 / .355 177.16 / 6.975 176.40 / 6.945 R 7.29 Max 5.207 .205 SB600 Series Dimensions of shell size 3 Rack plug 83.19 82.42 73.43 73.18 Panel cut-out / / / / 3.275 3.245 2.891 2.881 73.30 / 2.886 49.66 49.40 16.64 16.38 / / / / 1.955 1.945 .655 .645 49.53 35.61 Max 1.402 1.102 1.950 49.53 4.78 / .188 4.67 / .184 27.99 Max .650 4.57 / .180 O 4.22 / .166 R 0.762 Max 161.29 6.350 .380 .231 .221 .249 .245 1.65 / .065 1.40 / .055 3.30 / .130 3.05 / .120 30.23 / 1.190 29.97 / 1.180 7.44 /.293 7.19 / .283 4.85 / .191 4.80 / .189 3.84 / .151 O 3.68 / .145 Panel cut-out 73.30 / 2.886 38.89 Max 1.531 49.53 4.78 / .188 4.67 / .184 16.51 174.50 min 6.870 70.61 Max / 2.780 166.22 / 6.544 165.71 / 6.524 3.30 / .130 3.05 / .120 33.45 Max 6.93 / .273 6.68 / .263 4.57 / .180 O 4.22 / .166 R 7.29 Max .287 24.38 / .960 23.62 / .930 4.78 / .188 4.67 / .184 R 3.05 Max 2.200 55.88 min 177.16 / 6.975 176.40 / 6.945 11.68 / .460 11.43 / .450 2.92 / .115 2.67 / .105 161.42 / 6.355 161.18 / 6.345 54.23 / 2.135 53.98 / 2.125 83.19 / 3.275 82.42 / 3.245 1.65 / .065 1.40 / .055 1.950 .650 0.120 4.85 / .191 4.80 / .189 6.350 3.84 / .151 O 3.68 / .145 .360 1.221 161.29 31.01 Max 2.130 1.955 1.945 .655 .645 9.14 / / / / 54.10 49.66 49.40 16.64 16.38 .205 3.310 6.10 73.43 / 2.891 73.18 / 2.881 5.207 84.07 min .240 9.78 9.53 3.45 3.18 5.87 5.61 6.32 6.22 / / / / 3.15 / .124 3.05 / .120 Equipment receptacle 9.27 / .365 9.02 / .355 9.65 6.890 175.00 min 166.22 / 6.554 165.71 / 6.524 177.67 / 6.995 176.91 / 6.965 169.24 / 6.663 168.99 / 6.653 R 3.05 Max .120 / / / / .385 .375 .135 .125 161.54 / 6.360 161.04 / 6.340 54.23 / 2.135 53.98 / 2.125 .030 5.207 .205 76.20 min 3.000 1.317 163 SB600 Series SB 600 PC card drilling dimensions Equipment receptacle, shell 1 (viewed from rear face) 3,15 ( .124) 4,95 ( .194) 138,81 (5.465) 138,56 (5.455) (1.303) 52,30 (2.059) 52,04 (2.049) 97,16 (3.825) 96,90 (3.815) 10,80 ( .425) (1.313) 33,10 11,05 ( .435) 33,35 8,23 6,21 ( .245) 17,65 ( .695) 2,95 (.116) ( .324) 3,40( .133) 17,91 ( .705) 5,20 ( .204) 2,67 (.105) 20,57 ( .810) 20,32 ( .800) Equipment receptacle, shell 2 (viewed from rear face) 1,75 ( .068) 6,35 ( .250) 3,40 ( .133) (1.248) 50,90 (2.004) 50,65 (1.994) 27,43 (1.080) (1.258) 31,70 35,74 (1.407) 31,95 27,58 (1.086) 5,83 ( .230) 11,80 ( .116) ( .465) 2,95 35,89 (1.413) 6,60 ( .260) 1,27 ( .050) 95,76 (3.770) 95,50 (3.760) 136,02 (5.355) 135,76 (5.345) 21,92 ( .863) 21,77 ( .857) Equipment receptacle, shell 3 (viewed from rear face) 1,75 ( .068) 1,27 ( .050) 6,35 ( .250) 2,95 (.116) 81,92 (3.225) 2,31 ( .091) ( .825) 20,96 20,96 ( .825) 95,50 (3.760) 136,02 (5.355) 135,76 (5.345) Note : 2.54 mm (.100) pitch between rows. 164 21,92 ( .863) 21,77 ( .857) 9,45 ( .372) 50,65 (1.994) 95,76 (3.770) 64,45 (2.538) 9,70 ( .382) (1.248) 50,90 (2.004) 72,77 (2.865) (1.258) 31,70 73,02 (2.875) 31,95 64,72 (2.548) ( .730) 18,54 18,54 ( .730) 6,60 ( .260) 3,40 ( .133) SB600 Series Accessories Standard covers shells Supplied with connectors ; but may also be supplied separately. 1 Receptacle covers 2 and 3 Red colour. Plug covers shells Yellow colour. 1 2 and 3 Receptacle conductive covers shells Colour : black These covers are designed to protect equipments against risks of electrostatic discharge. There are in self-extinguishing polyphenylene with graphic filler. 1 2 and 3 designation for for for for power block signal block power block signal block designation for for for for power block signal block power block signal block designation for for for for power block signal block power block signal block part numbers 8660-144 8660-145 8660-146 8660-147 part numbers 8660-140 8660-141 8660-142 8660-143 part numbers 8660-1404 8660-1405 8660-1406 8660-1407 Cavity reducers for equipment receptacle for rack plug for adapting size 5 cavities to incorporate size 12 contacts 8660-343 8660-344 8660-537 8660-536 for adapting size 8 cavities to incorporate size 12 contacts for adapting size 8 cavities to incorporate size 16 contacts (38999) 8660-3134 8660-3133 Contact part numbers For rack plug male signal contacts - rear release part numbers 22 standard 8660-2020 crimp 22 alumel 22 chromel 8660-2090 8660-2080 22 constantan 8660-2029 green orange black green orange yellow green orange red green orange crimp contact sizes female power contacts - rear release contact sizes part numbers 20 standard 8660-2480 16 standard 8660-2490 16 small barrel 8660-2575 12 standard 12 small barrel 8660-2500 red orange blue orange orange yellow orange 8660-2570 orange 165 SB600 Series For equipment receptacle crimp contact sizes part numbers 22 standard 8660-2060 22 alumel 8660-2110 22 chromel green orange black green orange yellow green orange 8660-2100 red green orange 22 constantan 8660-2034 crimp male power contacts - rear release female signal contacts - rear release tin plated 8660-550 8660-C23-22V-01A/06 22 8660-C23-22V-02A/06 8660-C23-22V-03A/06 8660-565 orange green L = 9.52 (.375) 8660-C23-22V-04A/06 L = 12.70 (.500) 0.82 / .0320 0.90 / .0355 22 WW 8660-223 L = 6.35 (.250) 8660-224 L = 9.52 (.375) orange green 8660-225 L = 12.70 (.500) Male and female power contacts rear release Used these contacts for insulators Part numbers : 8660-J31-200-14A/00 8660-J31-200-04A/00 standard contacts part numbers contact contact without colour size type code male 8599-0704 8660-J30-200-14A/00 8660-J30-200-04A/00 MIL-C contacts part numbers female orange blue yellow orange green red M39029/ 58-364 8599-0708 M39029/ 56-352 Dummy contacts (unsealed version) 5 8 8 16 16 166 16 standard 8660-2330 blue orange dummy contact part numbers 8660-500 8660-499 8660-501 8660-502 8660-503 for plug 8660-505 for receptacle 8660-504 8660-3131 (plug) 8660-3132 (receptacle) (38999) 8660-3138 (plug) (38999) 8660-3139 (receptacle) colour black aluminum red blue yellow white white red red dummy contacts 8660-2360 yellow orange orange 20 8660-5430 L=3.81 / .150 O=0.81mm orange 16 8660-5460 L=3.81 / .150 O=1.27mm orange 12 8660-5490 L=3.81 / .150 O=2.05mm orange filler plug (sealed version) cavities size filler plug part numbers filler plug colour direction of entry 22 8660-212 black 20 8522-389 A red 16 8522-390 A blue 12 8522-391 A yellow 05 8660-726 white 08 8660-3035 red rear face of insulator front release size cables O over insulation min (in mm) max mm2 AWG 22 0.15 to 0.38 26-24-22 0.70 1.35 20 0.21 to 0.60 24-22-20 1.02 1.80 16 0.60 to 1.34 20-18-16 1.73 2.60 1.73 2.60 2.48 3.40 2.48 3.40 16 0.21 to 0.93 24-22-20-18 small barrel 12 front face of insulator rear face grommet wire data for crimp contacts rear release blue blue orange profile and colour code 16 22 rear release 22 front release 20 16 12 red orange L = 6.35 (.250) 8660-560 cavities size 8660-2300 12 8660-1049 small barrel 0.67 / .0265 straight spill straight spill 8660-555 20 standard 12 standard 0.60 / .0235 L = 3.81 (.150) part numbers 16 8660-1048 small barrel female signal contacts - front release gold plated contact sizes 1.91 to 3.18 14-12 12 0.21 to 0.93 24-22-20-18 small barrel SB600 Series Coaxial contacts size 5 For equipment receptacle male contact coaxial sealed connector unsealed connector For equipment receptacle male contact For rack plug female contact cables coaxial sealed connector unsealed connector cables 8660-2480 8660-2280 RG 58 C/U - RG 142 B/U RG 141 A/U 8660-2485 8660-2285 RG 58 C/U - RG 142 B/U RG 141 A/U 8660-2481 8660-2281 RG 174 A/U RG 188 A/U 8660-2486 8660-2286 RG 174 A/U RG 188 A/U 8660-2482 8660-2282 RG 223/U KX 23 8660-2487 8660-2287 RG 223/U KX 23 8660-2483 8660-2283 RG 178 B/U - KX 21 A RG 196 A/U - KX 22 A RG 316/U 8660-2488 8660-2288 RG 178 B/U - KX 21 A RG 196 A/U - KX 22 A RG 316/U 8660-2484 8660-2284 RG 180 B/U RG 195 A/U 8660-2489 8660-2289 RG 180 B/U RG 195 A/U 8660-2294 8660-2494 5021 K 1011 8660-2298E 8660-2498E 5021 K 1011 * crimp ferrule female inner contact Male body For rack plug female contact * crimp ferrule male inner contact Female body * Sealing sleeve supplied for Sealed. Connector class 0 Note : for details of other contacts and cables, please enquire Triaxial contacts size 8 For equipment receptacle male contact class For rack plug female contact part numbers 0 sealed 8599-5210 1 unsealed 8599-0988 class * part numbers 0 sealed 8599-5220 1 unsealed 8599-0998 * * Sealing sleeve supplied for Sealed. Connector class 0 Coaxial contacts size 1 For rack plug female contact class coaxial termination coaxial kit assembly class coaxial termination coaxial kit assembly cables RG 141 A/U 8660-2251 RG 142 B/U KX 23 8660-2582 8660-2252 UT 141 8660-2272 8660-2583 RG 165/U 8660-2250 RG 214/U RG 225/U 8660-2588 8660-2254 RG 393/U 8660-2236 8660-2313 Fileca 1703/3 8660-2585 8660-2237 8660-2311 Fileca 1703/3 8660-2277 8660-2580 Filotex 50 MTKT 8660-2581 RG 141 A/U 8660-2241 RG 142 B/U KX 23 8660-2582 8660-2242 UT 141 8660-2274 8660-2583 RG 165/U 8660-2240 RG 214/U RG 225/U 8660-2588 8660-2244 RG 393/U 8660-2236 8660-2314 Fileca 1703/3 Filotex 50 MTKT 8660-2585 RG 141 A/U 8660-2261 RG 142 B/U KX 23 RG 165/U 8660-2260 RG 214/U RG 225/U 8660-2263 RG 393/U 8660-2237 8660-2259 Fileca 1703/3 8660-2341 8660-2141 RG 400/BU 8660-2587 8660-2784 8660-2580 Filotex 50 MTKT cables RG 141 A/U 8660-2296 RG 142 B/U KX 23 RG 165/U 8660-2295 RG 214/U RG 225/U 8660-2299 RG 393/U 8660-2587 0 sealed 8660-2581 1 unsealed 1 unsealed 0 sealed For equipment receptacle male contact example coaxial assembly coaxial body termination kit coaxial assembly Filotex 50 MTKT Note : for size 1 90 versions, please enquire For rack plug, female contact for insert : 8660-J31-200-06-A/00 part number 8660-D21-100-01A/05 cable profile FILOTEX E0406WD FILOTEX 50MFCFB 167 SB600 Series Tooling Crimping (contacts sizes 22, 20, 16, 12) contact size AWG cables section in mm2 part numbers crimping tool locator 22 22 24 26 0.38 0.21 0.15 8476-01 (M22520/2-01) 8660-216 (M22520/2-23) 20 20 22 24 0.60 0.38 0.21 8476-01 (M22520/2-01) 8476-08 (M22520/2-08) 16 20 18 16 0.60 0.93 1.34 8365 (M22520/1-01) 8365-02 (M22520/1-02) 16 small barrel 24 22 20 18 0.21 0.38 0.60 0.93 8365 (M22520/1-01) 8365-02 (M22520/1-02) 12 14 12 1.91 3.18 8365 (M22520/1-01) 8365-02 (M22520/1-02) 12 small barrel 24 22 20 18 0.21 0.38 0.60 0.93 8365 (M22520/1-01) 8365-02 (M22520/1-02) Crimping (size 5 coaxial contacts) contact part numbers sealed connector unsealed connector inner contact crimoing tool locator body (ferrule) crimping tool hex dies 8660-2480/2485 8660-2280/2285 M22520/5-45B 8660-2481/2486 8660-2281/2286 8476-01 8660-2482/2487 8660-2282/2287 (M22520/2-01) 8660-2483/2488 8660-2283/2288 M22520/5-37B 8660-2484/2489 8660-2284/2289 M22520/5-43B M22520/5-37B M22520/2-14 M22520/5-01 M22520/5-45B Note : size 1 coaxial contacts do not require assembly tooling. Size 8 triaxial contacts : consult wiring instruction : NC 1767 (SHTP). Crimping (contact 8660-D21-100-01A/05) Crimping tool locator inner contact M22520/1 - 01 M22520/13 SEL - 8 external contact M22520/5 - 01 M22520/5 - 61 Contact insertion and extraction contacts size front release rear release 22 168 insertion and extraction colour M81969/1.01 green 20 8660-188 (M81969/1-02) red 16 8522-16 (M81969-14-03) blue 12 8522-12 (M81969-14-04) yellow coaxial insertion : manual - 5 extraction : 8660-187 (M81969/28-01) yellow triaxial insertion : manual - 8 8660-197 steel WW 22 8660-162 red straight spill 22 8660-162 red