IRAM630-1562F Intelligent Power Module for Energy Efficient Compressor Applications 15A, 600V IPM with Integrated PFC and Open Emitter Pins Description International Rectifier's IRAM630-1562F is a 15A, 600V PFC+Inverter Intelligent Power Module (IPM) with Open Emitter pins specifically designed for energy efficient Air Conditioners application. IR's technology offers an extremely compact, high performance compressor motor-driver with both PFC and Inverter stage in a single isolated package to simplify design. This advanced IPM is a combination of IR's low VCE (on) Trench IGBT technology and the industry benchmark 3 phase high voltage, high speed driver (3.3V compatible) in a fully isolated thermally enhanced package. A built-in high precision temperature monitor and over-current protection feature, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. Using a Single in line package with full transfer mold structure and CTI>600 minimizes PCB space and resolves isolation problems to heatsink. Features Integrated boost PFC power stage and gate driver Integrated gate drivers and bootstrap circuits Temperature monitor Protection shutdown pin Low VCE (on) Trench IGBT technology Undervoltage lockout for all channels Matched propagation delay for all channels 3.3V Schmitt-triggered input logic Cross-conduction prevention logic Motor Power range up to 2kW / 85~253 Vac Isolation 2000VRMS min and CTI> 600 RoHS Compliant Recognized by UL (File Number: E252584) Absolute Maximum Ratings VCES / VRRM IGBT/ FW Diode Blocking Voltage 600 VAC AC Input Voltage 253 V VRMS V+ Iin @ TC=25C Positive Bus Voltage PFC RMS Current at FPWM=20kHz 450 V Iin @ TC=100C PFC RMS Current at FPWM=20kHz 10 Ipk_PFC PFC Maximum Peak Phase Current (Note 1) 30 Fp_PFC PFC Maximum PWM Carrier Frequency PFC Maximum Power dissipation per IGBT @ TC =25C 20 kHz 62 W Pd_PFC 20 A Note 1: tP<100ms, VCC=15V, TC=25C, FPWM=20kHz. 1 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Internal Electrical Schematic - IRAM630-1562F V+ (16) D8 Q1 D1 Q2 D2 Q3 D3 Q4 D4 Q5 D5 Q6 D6 PFC (1) Q7 D7 V- (19) VRU (22) VRV (21) VRW (20) R7 R1 VB1 (12) C1 R2 R3 U, VS1 (13) VB2 (8) C2 V, VS2 (9) VB3 (4) C3 R4 R5 R6 W, VS3 (5) VB2 HO2 VS2 HIN1 (23) VB3 HO3 VS3 VCC VS1 LO1 HO1 LO2 LO3 VB1 HIN2 (24) COM VSS RCIN F/EN PFCOUT HIN1 LIN3 (28) ITRIP PFCIN VSDC LIN3 LIN2 (27) LIN2 GF LIN1 LIN1 (26) Driver IC HIN3 VDC HIN2 HIN3 (25) PFC TRIP PFCIN (29) FLT/EN (30) PFCTRIP (31) ITRIP (32) R9 TH (33) VCC (34) C4 R8 C5 C7 C6 VSS (35) 2 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F TJ (IGBT & Diode & IC) Maximum Operating Junction Temperature TC Operating Case Temperature Range -20 to +100 TSTG Storage Temperature Range -40 to +125 +150 T Mounting torque Range (M3 screw) 0.8 to 1.0 Note 1: tP<100ms, VCC=15V, TC=25C, FPWM=20kHz. Note 2: Sinusoidal Modulation at V+=400V, VCC=15V, TJ=150C, MI=0.8, PF=0.6, See Figure 4. Note 3: tP<100ms, VCC=15V, TC=25C, FPWM=6kHz. C Nm Absolute Maximum Ratings (Continued) Symbol Parameter VS1,2,3 High side floating supply offset voltage Min Max VB1,2,3 VB1,2,3 - 20 VB1,2,3 +0.3 V High side floating supply voltage -0.3 600 V VCC Low Side and logic fixed supply voltage -0.3 20 V VIN Input voltage LIN, HIN, PFCIN, ITrip, FLT/EN -0.3 VPFCTRIP PFCTRIP input voltage 3 www.irf.com -2 (c) 2013 International Rectifier Units Conditions Lower of (VSS+15V) or VCC+0.3V Lower of (VSS+15V) or VCC+0.3V V V Submit Datasheet Feedback October 23, 2013 IRAM630-1562F PFC Section Electrical Characteristics VBIAS (VCC, VBS1,2,3)=15V, TJ=25C, unless otherwise specified. Symbol Parameter Min Typ Max V(BR)CES Collector-to-Emitter Breakdown Voltage 600 --- --- V V(BR)CES / T Temperature Coeff. Of Breakdown Voltage --- 0.3 --- V/C VCE(ON) Collector-to-Emitter Saturation Voltage --- 1.15 1.4 --- 1.25 --- ICES Zero Gate Voltage Collector Current --- 10 150 --- 100 --- VFM Diode D8 Forward Voltage Drop VFM Diode D7 Forward Voltage Drop -- 1.75 2.2 --- 1.25 --- --- 1.95 --- Min Typ Max 700 Units Conditions V A V V VIN=0V, IC=250A VIN=0V, IC=1mA (25C - 150C) IC=10A, TJ=25C IC=10A, TJ=150C VIN=0V, V+=600V VIN=0V, V+=600V, TJ=150C IF=10A IF=10A, TJ=150C IF=3.5A PFC Section Switching Characteristics VBIAS (VCC, VBS1,2,3)=15V, TJ=25C, unless otherwise specified. Symbol Parameter EON Turn-On Switching Loss --- 540 EOFF Turn-Off Switching Loss --- 220 350 ETOT Total Switching Loss --- 760 1050 EREC Diode Reverse Recovery energy --- 15 35 tRR Diode Reverse Recovery time --- 140 --- EON Turn-on Switching Loss --- 930 --- EOFF Turn-off Switching Loss --- 310 --- ETOT Total Switching Loss --- 1240 --- EREC Diode Reverse Recovery energy --- 75 --- tRR Diode Reverse Recovery time --- 180 --- ns QG Turn-On IGBT Gate Charge --- 95 140 nC RBSOA Reverse Bias Safe Operating Area SCSOA 4 Short Circuit Safe Operating Area www.irf.com Units Conditions J ns J FULL SQUARE 2 (c) 2013 International Rectifier --- --- s IC=10A, V+=400V VCC=15V, L=1.2mH Energy losses include "tail" and diode reverse recovery See CT1 IC=10A, V+=400V VCC=15V, L=1.2mH, TJ=150C Energy losses include "tail" and diode reverse recovery See CT1 IC=48A, V+=400V, VGE=15V TJ=150C, IC=40A, VP=600V V+= 450V, VGE=+15V to 0V TJ=150C, V+= 360V, VGE=+15V to 0V See CT3 Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Inverter Section Electrical Characteristics VBIAS (VCC, VBS1,2,3)=15V, TJ=25C, unless otherwise specified. Symbol Parameter Min Typ Max Units Conditions V(BR)CES Collector-to-Emitter Breakdown Voltage 600 --- --- V VIN=0V, IC=250A V(BR)CES / T Temperature Coeff. Of Breakdown Voltage --- 0.3 --- V/C VIN=0V, IC=250A (25C - 150C) VCE(ON) Collector-to-Emitter Saturation Voltage --- 1.5 1.7 --- 1.7 --- ICES Zero Gate Voltage Collector Current --- 5 80 --- 80 --- VFM Diode Forward Voltage Drop C1,2,3,4 C6,7 V A IC=5A, TJ=25C IC=5A, TJ=150C VIN=0V, V+=600V VIN=0V, V+=600V, TJ=150C IF=5A -- 1.8 2.35 --- 1.45 --- VCC / VBS Capacitor Value --- 47 --- nF TJ=25C Itrip / PFCtrip Capacitor Value --- 1 --- nF TJ=25C V IF=5A, TJ=150C Inverter Section Switching Characteristics VBIAS (VCC, VBS1,2,3)=15V, TJ=25C, unless otherwise specified. Symbol Parameter Min Typ Max EON Turn-On Switching Loss --- 220 350 EOFF Turn-Off Switching Loss --- 85 140 ETOT Total Switching Loss --- 305 490 EREC Diode Reverse Recovery energy --- 15 35 tRR Diode Reverse Recovery time --- 115 --- EON Turn-on Switching Loss --- 320 --- EOFF Turn-off Switching Loss --- 115 --- ETOT Total Switching Loss --- 435 --- EREC Diode Reverse Recovery energy --- 50 --- tRR Diode Reverse Recovery time --- 160 --- ns QG Turn-On IGBT Gate Charge --- 19 29 nC RBSOA Reverse Bias Safe Operating Area SCSOA 5 Short Circuit Safe Operating Area www.irf.com Units Conditions J ns J FULL SQUARE 2 (c) 2013 International Rectifier --- --- s IC=5A, V+=400V VCC=15V, L=1.2mH Energy losses include "tail" and diode reverse recovery See CT1 IC=5A, V+=400V VCC=15V, L=1.2mH, TJ=150C Energy losses include "tail" and diode reverse recovery See CT1 IC=8A, V+=400V, VGE=15V TJ=150C, IC=5A, VP=600V V+= 450V, VCC=+15V to 0V TJ=150C, V+= 360V, VGE=+17.5V to 0V See CT3 Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Recommended Operating Conditions Driver Function The Input/Output logic timing diagram is shown in Figure 1. For proper operation the device should be used within the recommended conditions. All voltages are absolute referenced to COM. The VS offset is tested with all supplies biased at 15V differential (Note 4) Symbol Definition VB1,2,3 High side floating supply voltage Min Typ Max Units VS+12.5 VS+15 VS+17.5 VS1,2,3 V High side floating supply offset voltage Note 5 --- 450 V VCC Low side and logic fixed supply voltage 13.5 15 16.5 V VIN Logic input voltage LIN, HIN, PFCIN, ITrip, FLT/EN 0 --- 5 V VPFCTRIP PFCTRIP input voltage -2 --- 0 V HIN High side PWM pulse width 1 --- --- s Deadtime External dead time between HIN and LIN 1 --- --- s Note 4: For more details, see IRS26302D data sheet Note 5: Logic operational for Vs from COM-5V to COM+600V. Logic state held for Vs from COM-5V to COM-VBS. (please refer to DT97-3 for more details) Static Electrical Characteristics Driver Function VBIAS (VCC, VBS1,2,3)=15V, TJ=25C, unless otherwise specified. The VIN and IIN parameters are referenced to COM and are applicable to all six channels. (Note 4) Symbol Definition Min Typ VIN,th+ Max Units Positive going input threshold for LIN, HIN, PFCIN, FLT/EN 2.5 VIN,th- Negative going input threshold for LIN, HIN, PFCIN, FLT/EN --- --- --- V --- 0.8 VCCUV+, VBSUV+ VCC/VBS supply undervoltage, Positive going threshold V 10.2 11.1 12 VCCUV-, VBSUV- VCC/VBS supply undervoltage, Negative going threshold V 10 10.9 11.8 V VCCUVH, VBSUVH V(ITRIP) VCC and VBS supply undervoltage lock-out hysteresis --- 0.2 --- V ITRIP threshold Voltage 0.4 0.5 0.6 V V(ITRIP, HYS) ITRIP Input Hysteresis --- 0.05 --- V V(PFCTRIP) PFCTRIP threshold Voltage V -0.16 -0.2 -0.24 V(PFCTRIP, HYS) PFCTRIP Input Hysteresis --- 0.02 --- V IQBS Quiescent VBS supply current --- --- 120 A IQCC Quiescent VCC supply current --- --- 4 mA ILK Offset Supply Leakage Current --- --- 50 A IIN+ Input bias current VIN=3.3V for LIN, HIN, PFCIN, FLT/EN 350 -- 860 A IIN- Input bias current VIN=0V for LIN, HIN, PFCIN, FLT/EN -- 0 1 A ITRIP+ ITRIP bias current VT/ITRIP=3.3V --- 1 2 A ITRIP- ITRIP bias current VT/ITRIP=0V --- 0 5 A PFCTRIP+ PFC ITRIP bias current VPFC_ITRIP=-250mV --- 20 --- A PFCTRIP- PFC ITRIP bias current VPFC_ITRIP=0V --- 0 5 A Ron_FLT Fault low on resistance --- 50 100 RBS Internal bootstrap FET on resistance --- 200 400 6 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Dynamic Electrical Characteristics VBIAS (VCC, VBS1,2,3)=15V, TJ=25C, unless otherwise specified. Driver only timing unless otherwise specified. Symbol Parameter Min Typ Max TON Input to Output propagation turnon delay time (see fig.11) --- --- 1.15 TOFF Input to Output propagation turnoff delay time (see fig. 11) --- --- 1.15 s TFILIN Input filter time (HIN,LIN,PFC,EN) 200 350 --- ns VIN=0 or VIN=3.3V TFILEN Input filter time (FLT/EN) 100 200 --- ns VIN=0 or VIN=5V TEN EN low to six switch turn-off propagation delay (see fig. 3) --- --- 1.15 s VIN=0 or VIN=3.3V, VEN=0 TFLT ITRIP to Fault propagation delay --- 800 --- ns VIN=0 or VIN=3.3V, VITRIP=3.3V TBLT-ITRIP ITRIP Blanking Time --- 500 --- ns VIN=0 or VIN=3.3V, VITRIP=3.3V --- --- 1.5 s IC=5A, V+=400V --- --- 1.5 s IC=10A, V+=400V TITRIP TPFCTRIP ITRIP to six switch turn-off propagation delay (see fig. 2) PFCTRIP to switch turn-off propagation delay (see fig. 2) Units Conditions s IC=5A, V+=400V DT Internal Dead Time injected by driver 190 290 420 ns VIN=0 or VIN=3.3V MT Matching Propagation Delay Time (On & Off) all channels --- --- 50 ns External dead time> 400ns TFLT-CLR Post ITRIP to six switch turn-off clear time (see fig. 2) 1.17 1.7 2.19 --- 1.5 --- 7 www.irf.com (c) 2013 International Rectifier ms TC = 25C TC = 100C Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Thermal and Mechanical Characteristics Symbol Parameter Min Typ Max Rth(J-C) Thermal resistance, PFC IGBT --- 1.6 2.0 Rth(J-C) Thermal resistance, PFC Diode --- 3.0 3.6 Rth(J-C) Thermal resistance, per IGBT --- 3.8 4.6 Rth(J-C) Thermal resistance, per Diode --- 5.8 6.9 Rth(C-S) Thermal resistance, C-S --- 0.1 --- CTI Comparative Tracking Index 600 --- --- Units Conditions Inverter Operating Condition Flat, greased surface. Heatsink C/W compound thermal conductivity 1W/mK V Internal NTC - Thermistor Characteristics Parameter Definition Min Typ Max Units Conditions R25 Resistance 44.65 47 49.35 k TC = 25C R125 Resistance 1.27 1.41 1.56 k TC = 125C B B-constant (25-50C) 3989 4050 4111 k Temperature Range -40 --- 125 C Typ. Dissipation constant --- 1 --- R2 = R1e [B(1/T2 - 1/T1)] mW/C TC = 25C Input-Output Logic Level Table V+ LIN1,2,3 IC Driver (24,25,26) 8 ITRIP HIN1,2,3 LIN1,2,3 U,V,W 1 0 1 0 V+ 1 0 0 1 0 U,V,W 1 0 0 0 Off (10,6,2) 1 0 1 1 Off 1 1 X X Off 0 X X X Off Ho HIN1,2,3 (20,22,23) FLT/EN www.irf.com Lo (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F HIN1,2,3 LIN1,2,3 ITRIP U,V,W Figure 1. Input/Output Timing Diagram HIN1,2,3 LIN1,2,3 50% ITRIP 50% TFLT 50% FLT U,V,W 50% 50% TITRIP TFLT-CLR Figure 2. ITRIP Timing Waveform EN 50% TEN U,V,W 50% Figure 3. Output Enable Timing Diagram Note 6: The shaded area indicates that both high-side and low-side switches are off and therefore the half-bridge output voltage would be determined by the direction of current flow in the load. 9 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Module Pin-Out Description 10 Pin Name 1 PFC PFC 2 na none 3 na none 4 VB3 5 W,VS3 6 na none 7 na none 8 VB2 9 V,VS2 10 na none 11 na none 12 VB1 13 U,VS1 14 na none 15 na none 16 + V Positive Bus Input Voltage 17 na none 18 na none 19 - V 20 VRW Low Side Emitter Connection - Phase 3 21 VRV Low Side Emitter Connection - Phase 2 22 VRU Low Side Emitter Connection - Phase 1 23 HIN1 Logic Input High Side Gate Driver - Phase 1 24 HIN2 Logic Input High Side Gate Driver - Phase 2 25 HIN3 Logic Input High Side Gate Driver - Phase 3 26 LIN1 Logic Input Low Side Gate Driver - Phase 1 27 LIN2 Logic Input Low Side Gate Driver - Phase 2 28 LIN3 Logic Input Low Side Gate Driver - Phase 3 29 PFCIN PFC input 30 FLT/EN Fault Output and Enable Pin 31 PFCTRIP Current Protection Pin for PFC 32 ITRIP Current Protection Pin for Inverter 33 VTH Temperature Feedback 34 VCC +15V Main Supply 35 VSS Negative Main Supply www.irf.com Description High Side Floating Supply Voltage 3 Output 3 - High Side Floating Supply Offset Voltage High Side Floating Supply voltage 2 Output 2 - High Side Floating Supply Offset Voltage High Side Floating Supply voltage 1 Output 1 - High Side Floating Supply Offset Voltage Negative Bus Input Voltage (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Typical Application Connection IRAM630-1562F Drive IC 1. Electrolytic bus capacitors should be mounted as close to the module bus terminals as possible to reduce ringing and EMI problems. Additional high frequency ceramic capacitor mounted close to the module pins will further improve performance. 2. In order to provide good decoupling between VCC-VSS and VB1,2,3-VS1,2,3 terminals, the capacitors shown connected between these terminals should be located very close to the module pins. Additional high frequency capacitors, typically 0.1F, are strongly recommended. 3. Value of the boot-strap capacitors depends upon the switching frequency. Their selection should be made based on IR design tip DT04-4, application note AN-1044 or Figure 11. Bootstrap capacitor value must be selected to limit the power dissipation of the internal resistor in series with the VCC. (see maximum ratings Table on page 3). 4. After approx. 2ms the FAULT is reset. (see Dynamic Characteristics Table on page 5). 5. PWM generator must be disabled within Fault duration to guarantee shutdown of the system, overcurrent condition must be cleared before resuming operation. 11 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 Maxim um Output Phase RMS Current - A IRAM630-1562F 12 11 10 9 8 7 6 TC = 80C TC = 90C TC = 100C 5 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 20 PWM Sw itching Frequency - kHz Figure 4. Maximum Sinusoidal Phase Current vs. PWM Switching Frequency + Sinusoidal Modulation, V =400V, TJ=150C, MI=0.8, PF=0.6, fmod=50Hz Maxim um Output Phase RMS Current - A 8 7 6 5 4 FPWM = 6kHz FPWM = 10kHz FPWM = 16kHz 3 2 1 0 1 10 100 Modulation Frequency - Hz Figure 5. Maximum Sinusoidal Phase Current vs. Modulation Frequency + Sinusoidal Modulation, V =400V, TJ=150C, TC=100C, MI=0.8, PF=0.6 12 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F 120 Total Pow er Loss- W 100 80 60 40 IOUT = 7.5A IOUT = 6A IOUT = 5A 20 0 0 2 4 6 8 10 12 14 16 18 20 PWM Sw itching Frequency - kHz Figure 6. Total Power Losses vs. PWM Switching Frequency + Sinusoidal Modulation, V =400V, TJ=150C, MI=0.8, PF=0.6, fmod=50Hz 120 Total Pow er Loss - W 100 80 60 FPWM = 16kHz FPWM = 10kHz FPWM = 6kHz 40 20 0 0 1 2 3 4 5 6 7 8 Output Phase Current - ARMS Figure 7. Total Power Losses vs. Output Phase Current + Sinusoidal Modulation, V =400V, TJ=150C, MI=0.8, PF=0.6, fmod=50Hz 13 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Max Allow able Case Temperature - C 160 140 120 100 FPWM = 6kHz FPWM = 10kHz FPWM = 16kHz 80 60 40 0 1 2 3 4 5 6 7 8 Output Phase Current - ARMS Figure 8. Maximum Allowable Case Temperature vs. Output RMS Current per Phase + Sinusoidal Modulation, V =400V, TJ=150C, MI=0.8, PF=0.6, fmod=50Hz 160 IGBT Junction Temperature - C TJ avg = 1.28 x TTherm + 7.57 150 140 130 120 110 100 90 65 70 75 80 85 90 95 100 105 110 115 Internal Therm istor Tem perature Equivalent Read Out - C Figure 9. Estimated Maximum IGBT Junction Temperature vs. Thermistor Temperature Sinusoidal Modulation, V+=400V, Iphase=5Arms, fsw=16kHz, fmod=50Hz, MI=0.8, PF=0.6 14 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F 5.0 Thermistor Pin Read-Out Voltage - V +5V 4.5 REXT VTherm 4.0 3.5 3.0 2.5 2.0 1.5 TTHERM C RTHERM k TTHERM C RTHERM k TTHERM C RTHERM k -40 1747 25 47.00 90 3.972 -35 1245 30 37.64 95 3.388 -30 898.5 35 30.33 100 2.902 -25 655.8 40 24.59 105 2.494 -20 484.0 45 20.05 110 2.150 -15 360.9 50 16.43 115 1.860 -10 271.7 55 13.54 120 1.615 -5 206.5 60 11.21 125 1.406 0 158.2 65 9.328 130 1.228 5 122.3 70 7.798 135 1.076 10 95.23 75 6.544 140 0.9447 15 74.73 80 5.518 145 0.8321 20 59.07 85 4.674 150 0.7349 1.0 -40 -30 -20 -10 0 10 RTherm Max Avg. Min 20 30 40 50 60 70 80 Therm istor Tem perature - C 90 100 110 120 130 Figure 10. Thermistor Readout vs. Temperature (4.7kohm pull-up resistor, 5V) and Normal Thermistor Resistance values vs. Temperature Table. Recommended Bootstrap Capacitor - F 11.0 10F 10.0 9.0 8.0 6.8F 7.0 6.0 4.7F 5.0 4.0 3.3F 3.0 2.2F 1.5F 2.0 1.0 0.0 0 5 10 15 20 PWM Frequency - kHz Figure 11. Recommended Bootstrap Capacitor Value vs. Switching Frequency 15 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Figure 12. Switching Parameter Definitions VCE IC IC VCE HIN /LIN 50% HIN /LIN 90 % IC 50% VCE 90 % IC 50% HIN /LIN HIN /LIN 50% VCE 10 % IC 10 % IC tr tf TON TOFF Figure 12a. Input to Output propagation turnon delay time. IF Figure 12b. Input to Output propagation turnoff delay time. VCE HIN /LIN Irr trr Figure 12c. Diode Reverse Recovery. 16 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F V+ IN Ho Hin1,2,3 IC Driver U,V,W Lo Lin1,2,3 IO Figure CT1. Switching Loss Circuit V+ Lin1,2,3 IN Ho Hin1,2,3 IC Driver U,V,W Lo IO Io Figure CT2. S.C.SOA Circuit V+ IC Driver Lin1,2,3 IN Ho Hin1,2,3 U,V,W Lo IO Io Figure CT3. R.B.SOA Circuit 17 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F Package Outline IRAM630-1562F2 missing pin : 2,3,6,7,10,11,14,15,17,18 note3 note5 note4 P 9DF00 IRA M630-1562F2 note2 1 35 note1: Unit Tolerance is + 0.5mm, Unless Otherwise Specified. note2: Mirror Surface Mark indicates Pin1 Identification. note3: Part Number Marking. Characters Font in this drawing differs from Font shown on Module. note4: Lot Code Marking. Characters Font in this drawing differs from Font shown on Module. note5: "P" Character denotes Lead Free. Characters Font in this drawing differs from Font shown on Module. Dimensions in mm For mounting instruction see AN-1049 Data and Specifications are subject to change without notice IR WORLD HEADQUARTERS: 101 N Sepulveda Blvd, El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information 18 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013 IRAM630-1562F 2013-10-23 19 www.irf.com (c) 2013 International Rectifier Submit Datasheet Feedback October 23, 2013