Copperhead Series Fibre Channel Transceiver Line Interface Module High Performance, low cost alternative to completely fiber systems Compact small Package saves PCB foot print Equalizer and transformers isolation provides long distance applications , better transient protection and common mode rejection. Low transmit/receive jitter Low Power dissipation; 300mW typical Operating Temperature -55C to +125C Transmitter Parameter Vcc = 3.15V to 3.45V SYM MIN Input Data Voltage Low VIL Input Data Voltage High VIH Differential Input Data Voltage Input High Voltage Typical MAX UNIT 1.35 -- 1.88 V 2.07 -- 2.58 -- VIN 150 800 1200 mV P-P -- -- -- -- -- Common Mode Range(Differential) VIHCMR 2 -- 3.3 V Transmitte Output Impadence (Diff) Ztx-Diff 100 150 -- Ohma Output Differential signal level (p-p) VOT 1100 1250 -- mV Data Rate (NRZ) DR -- 1062 -- Mb/s Total P-P transmit jitter (Dj=Rj) TPK-PK -- 180 235 ps Output rise-fall time (20%-80%) TRO -- -- 430 ps SYM MIN Typical MAX UNIT Input Voltage swing(Differential) VIN-P-P 150 -- 1200 mV Differential Output Data Voltage VO-Diff. 500 -- 1000 mV OutputCommon-Mode Voltage VO-comm 1.75 1.93 2.05 V Receiver Parameter Data Rate (NRZ) Total P-P transmit jitter (Dj=Rj) Return Loss, Input Vcc = 3.15V to 3.45V DR -- 1062 -- Mb/s TPK-PK -- 375 526 ps S11 -15 -17 -- dB USA 215 781 6400 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com M142.A (2/10) Copperhead Series Fibre Channel Transceiver Line Interface Module Mechanical Schematic TM1062HSB1 Suggested Application For LVPECL Interface USA 215 781 6400 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com M142.A (2/10) Split Core Current Sense Transformers Suggested Application For LVDS and CML Interface Pin number(s) 1................... 2, 3 ............... 4,5................ 6 .................. 7,8 ................ 9,10 .............. 11,12,13,14.... 15, 16 ........... The positive supply for the line interface module. Connect to +3.3V for PECL application. Di, Di/ : Differential PECL compatible data inputs to the transmitter side of the module. Di, Di/ should be control impedance 100 ohm differential line. If input to Di, Di/ is not PECL compatible Di/, Di should AC coupled with 0.1 uF close to pin 1 and 2 .and biased up to PECL common mode +2.0 V dc using 50 to pin 1 and pin 2 ( 100 differential). Signal Gnd: The negative supply for the line interface module. Connect to Gnd for PECL applications. Vbb : Output ,PECL common mode voltage reference. DO , DO/ : Differential PECL data outputs. Terminate both output with 150 to ground. Traces should be control impedance 100 ohm differential , can be terminated 100 ohms diff. at the receiver chip. If receiver is not PECL input Do and Do/ should be AC coupled with 0.1 uF close to pin 2 and 3 into 100 ohm differential line .Far end(at receiver chip) Do, Do/ should be terminated with 50 ohms to bias voltage Vbb. (this will terminate differential line into 100 ohm.) R X -, R X + : Transformer coupled differential inputs to receiver section Internally terminated for 150 cable. For single ended coax applications, R X -should be connected to shield of cable/earth Gnd; R X + should be connected to the center conductor. Earth Gnd should be AC coupled to DC signal Gnd using a 0.027 F capacitor, ~500V. No internal connection to these pins. T X - , T X + : Transformer coupled differential outputs to 150 cable. For coax applications Tx-,should be connected to shield of cable/earth Gnd; T X + should be connected to the center conductor. Earth Gnd should be AC coupled to DC signal Gnd using a 0.027 F capacitor, 500V. For More Information: Pulse Worldwide Headquarters Two Pearl Buck Court Bristol, PA 19007 U.S.A. www.pulseeng.com Tel: 215 781 6400 Fax: 215 781 6403 Pulse Europe Zeppelinstrasse 15 D-71083 Herrenberg Germany Pulse China Headquarters Pulse North China B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China 518057 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Rd. West Shanghai 200336 China Tel: 86 21 62787060 Fax: 86 2162786973 Pulse South Asia Pulse North Asia 3F, No. 198 Zhongyuan Rd. Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) 135 Joo Seng Rd. #03-02 PM Industrial Bldg. Singapore 368363 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2010. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com M142.A (2/10)