SiS322DNT www.vishay.com Vishay Siliconix N-Channel 30 V (D-S) MOSFET FEATURES PowerPAK(R) 1212-8S D D D 7 8 D 6 5 3. 3 m m 1 3.3 mm Top View * TrenchFET(R) Gen IV power MOSFET * 100 % Rg and UIS tested * Thin 0.75 mm height 4 G Bottom View 3 S 2 S * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 1 S APPLICATIONS * Switch mode power supplies * Personal computers and servers PRODUCT SUMMARY VDS (V) RDS(on) max. () at VGS = 10 V RDS(on) max. () at VGS = 4.5 V Qg typ. (nC) ID (A) Configuration D * Telecom bricks 30 0.0075 0.0120 6.9 38.3 f Single G * VRM's and POL S N-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free and halogen-free PowerPAK 1212-8S SiS322DNT-T1-GE3 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise noted) PARAMETER Drain-source voltage Gate-source voltage Continuous drain current (TJ = 150 C) SYMBOL VDS VGS TC = 25 C TC = 70 C TA = 25 C TA = 70 C Pulsed drain current (t = 300 s) LIMIT 30 +20, -16 38.3 30.6 15.3 a, b 12.1 a, b 70 18 2.9 a, b 10 5 19.8 12.7 3.2 a, b 3 a, b -55 to +150 260 ID IDM Continuous source-drain diode current TC = 25 C TA = 25 C IS Single pulse avalanche current Single pulse avalanche energy L = 0.1 mH IAS EAS TC = 25 C TC = 70 C Maximum power dissipation TA = 25 C TA = 70 C Operating junction and storage temperature range Soldering recommendations (peak temperature) c, d PD TJ, Tstg UNIT V A mJ W C THERMAL RESISTANCE RATINGS PARAMETER Maximum junction-to-ambient a, e Maximum junction-to-case (drain) t 10 s Steady state SYMBOL RthJA RthJC TYPICAL 31 5 MAXIMUM 39 6.3 UNIT C/W Notes a. Surface mounted on 1" x 1" FR4 board b. t = 10 s c. See solder profile (www.vishay.com/doc?73257). The Thin PowerPAK 1212-8S is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection d. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components e. Maximum under steady state conditions is 81 C/W f. Based on TC = 25 C S17-1448-Rev. B, 18-Sep-17 Document Number: 63569 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiS322DNT www.vishay.com Vishay Siliconix SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = 250 A 30 - - - V 18.5 - - -5.2 - Static Drain-source breakdown voltage VDS temperature coefficient VDS/TJ VGS(th) temperature coefficient VGS(th)/TJ Gate-source threshold voltage ID = 250 A mV/C VGS(th) VDS = VGS , ID = 250 A 1.2 - 2.4 V Gate-source leakage IGSS VDS = 0 V, VGS = +20 V, -16 V - - 100 nA Zero gate voltage drain current IDSS On-state drain current a ID(on) Drain-source on-state resistance a Forward transconductance a RDS(on) gfs VDS = 30 V, VGS = 0 V - - 1 VDS = 30 V, VGS = 0 V, TJ = 55 C - - 10 VDS 5 V, VGS = 10 V 30 - - A VGS = 10 V, ID = 10 A - 0.0060 0.0075 VGS = 4.5 V, ID = 8 A - 0.0096 0.0120 VDS = 15 V, ID = 10 A - 54 - A S Dynamic b Input capacitance Ciss - 1000 - Output capacitance Coss - 287 - Reverse transfer capacitance Crss - 34 - - 0.034 0.068 - 14.3 21.5 - 6.9 10.5 VDS = 15 V, VGS = 0 V, f = 1 MHz Crss/Ciss ratio Total gate charge Qg Gate-source charge Qgs Gate-drain charge Qgd Output charge Qoss Gate resistance Rg Turn-on delay time Rise time Turn-off delay time Fall time Turn-on delay time Rise time Turn-off delay time Fall time VDS = 15 V, VGS = 10 V, ID = 10 A VDS = 15 V, VGS = 4.5 V, ID = 10 A - 2.8 - - 1.6 - VDS = 15 V, VGS = 0 V - 7.8 - f = 1 MHz 0.4 1.6 3.2 - 15 30 - 10 20 td(on) tr td(off) VDD = 15 V, RL = 1.5 ID 10 A, VGEN = 4.5 V, Rg = 1 pF nC - 15 30 tf - 7 14 td(on) - 11 22 - 9 18 - 15 30 - 5 10 - - 18 - - 70 - 0.77 1.1 V - 19 35 ns - 7 14 nC - 10 - - 9 - tr td(off) VDD = 15 V, RL = 1.5 ID 10 A, VGEN = 10 V, Rg = 1 tf ns Drain-Source Body Diode Characteristics Continuous source-drain diode current IS Pulse diode forward current ISM Body diode voltage VSD Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Reverse recovery fall time ta Reverse recovery rise time tb TC = 25 C IS = 5 A, VGS = 0 V IF = 10 A, di/dt = 100 A/s, TJ = 25 C A ns Notes a. Pulse test: pulse width 300 s, duty cycle 2 % b. Guaranteed by design, not subject to production testing Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S17-1448-Rev. B, 18-Sep-17 Document Number: 63569 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiS322DNT www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 70 55 VGS = 10 V thru 4V 44 VGS = 3 V ID - Drain Current (A) ID - Drain Current (A) 56 42 28 14 33 TC = 25 C 22 11 TC = 125 C VGS = 2 V 0 0.0 0.5 1.0 1.5 2.0 TC = -55 C 0 2.5 VDS - Drain-to-Source Voltage (V) 1 2 3 4 VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 0.020 0 5 1200 Ciss 960 VGS = 4.5 V C - Capacitance (pF) RDS(on) - On-Resistance () 0.016 0.012 0.008 720 Coss 480 240 0.004 VGS = 10 V Crss 0 0.000 0 14 28 42 ID - Drain Current (A) 56 0 70 5 10 15 20 25 VDS - Drain-to-Source Voltage (V) Capacitance On-Resistance vs. Drain Current and Gate Voltage 1.7 10 ID = 10 A RDS(on) - On-Resistance (Normalized) ID = 10 A VGS - Gate-to-Source Voltage (V) 30 8 VDS = 15 V 6 VDS = 10 V VDS = 20 V 4 2 0 0 3 6 9 12 Qg - Total Gate Charge (nC) Gate Charge S17-1448-Rev. B, 18-Sep-17 15 VGS = 10 V 1.5 1.3 VGS = 4.5 V 1.1 0.9 0.7 -50 -25 0 25 50 75 100 125 150 TJ - Junction Temperature (C) On-Resistance vs. Junction Temperature Document Number: 63569 3 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiS322DNT www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 100 0.030 ID = 10 A 0.024 RDS(on) - On-Resistance () IS - Source Current (A) 10 TJ = 150 C TJ = 25 C 1 0.1 0.01 0.018 TJ = 125 C 0.012 TJ = 25 C 0.006 0.001 0.000 0.0 0.3 0.6 0.9 1.2 1.5 0 2 4 6 8 VGS - Gate-to-Source Voltage (V) VSD - Source-to-Drain Voltage (V) On-Resistance vs. Gate-to-Source Voltage 0.5 50 0.2 40 -0.1 Power (W) VGS(th) Variance (V) Source-Drain Diode Forward Voltage 10 ID = 5 mA -0.4 30 20 ID = 250 A -0.7 -1.0 -50 10 -25 0 25 50 75 100 TJ - Temperature (C) 125 150 0 0.001 Threshold Voltage 0.01 0.1 Time (s) 1 10 Single Pulse Power, Junction-to-Ambient 100 ID - Drain Current (A) 10 IDM limited 100 s ID limited 1 ms 1 Limited by R (1) DS(on) 10 ms 100 ms 0.1 1s 10 s TA = 25 C Single pulse DC BVDSS limited 0.01 0.01 (1) 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient S17-1448-Rev. B, 18-Sep-17 Document Number: 63569 4 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiS322DNT www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 45 ID - Drain Current (A) 36 27 18 9 0 0 25 50 75 100 125 150 0 25 TC - Case Temperature (C) 25 2.0 20 1.6 15 1.2 Power (W) Power (W) Current Derating a 10 0.8 0.4 5 0.0 0 0 25 50 75 100 TC - Case Temperature (C) Power, Junction-to-Case 125 150 50 75 100 125 150 TA - Ambient Temperature (C) Power, Junction-to-Ambient Note a. The power dissipation PD is based on TJ max. = 150 C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. S17-1448-Rev. B, 18-Sep-17 Document Number: 63569 5 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiS322DNT www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 1 Normalized Effective Transient Thermal Impedance Duty cycle = 0.5 0.2 Notes: 0.1 0.1 PDM 0.05 t1 t2 1. Duty cycle, D = t1 t2 2. Per unit base = R thJA = 81 C/W 0.02 3. T JM - TA = PDMZthJA(t) Single pulse 4. Surface mounted 0.01 0.0001 0.001 0.01 0.1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty cycle = 0.5 0.2 0.1 0.05 0.1 0.02 Single pulse 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?63569. S17-1448-Rev. B, 18-Sep-17 Document Number: 63569 6 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix PowerPAK(R) 1212-8T MILLIMETERS INCHES DIM. MIN. NOM. MAX. MIN. NOM. A 0.70 0.75 0.80 0.028 0.030 MAX. 0.031 A1 0.00 - 0.05 0.000 - 0.002 b 0.23 0.30 0.41 0.009 0.012 0.016 c 0.23 0.28 0.33 0.009 0.011 0.013 D 3.20 3.30 3.40 0.126 0.130 0.134 D1 2.95 3.05 3.15 0.116 0.120 0.124 D2 1.98 2.11 2.24 0.078 0.083 0.088 D3 0.48 - 0.89 0.019 - 0.035 D4 0.47 TYP. 0.0185 TYP. D5 2.3 TYP. 0.090 TYP. E 3.20 3.30 3.40 0.126 0.130 0.134 E1 2.95 3.05 3.15 0.116 0.120 0.124 E2 1.47 1.60 1.73 0.058 0.063 0.068 E3 1.75 1.85 1.98 0.069 0.073 0.078 0.34 TYP. E4 0.013 TYP. e 0.65 BSC 0.026 BSC K 0.86 TYP. 0.034 TYP. K1 0.35 - - 0.014 - - H 0.30 0.41 0.51 0.012 0.016 0.020 L 0.30 0.43 0.56 0.012 0.017 0.022 L1 0.06 0.13 0.20 0.002 0.005 0.008 0 - 12 0 - 12 W 0.15 0.25 0.36 0.006 0.010 0.014 M 0.125 TYP. 0.005 TYP. ECN: T13-0056-Rev. A, 18-Feb-13 DWG: 6012 Revison: 18-Feb-13 1 Document Number: 62836 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000