SPECIFICATION
MODEL EPS-15-3.3 EPS-15-12
EPS-15-5 EPS-15-7.5 EPS-15-15 EPS-15-24 EPS-15-27 EPS-15-48
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE Note.5
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVER LOAD
OVER VOLTAGE
3.3V 12V
5V 7.5V 15V 24V 27V 48V
3A 1.25A
3A 2A 1A 0.625A 0.56A 0.313A
0 ~ 3.3A 0 ~ 1.38A
0 ~ 3.3A 0 ~ 2.2A 0 ~ 1.1A 0 ~ 0.69A 0 ~ 0.615A 0 ~ 0.344A
9.9W 15W
15W 15W 15W 15W 15.12W 15.02W
50mVp-p 80mVp-p
50mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 200mVp-p
3.1 ~ 3.6V 10.8 ~ 13.5V
4.75 ~ 5.5V 7.13 ~ 8.25V 13.5 ~ 16.5V 21.6 ~ 27V 24.3 ~ 29.7V 43.2 ~ 52.8V
±2.0%
±0.5%
±1.0%
1000ms, 30ms/230VAC 2000ms, 30ms/115VAC at full load
50ms/230VAC 16ms/115VAC at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
3.8 ~ 4.85V 5.6 ~ 6.75V 8.63~ 10.1V 13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 33V
31.05 ~ 36.45V
39.7 ~ 46.8V 55.2 ~ 65.8V
75% 82%
78% 81% 83% 83% 84% 85%
0.4A/115VAC 0.2A/230VAC
COLD START 45A/230VAC
115 ~ 150% rated output power
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, Class BEAC TP TC 020, GB9254 , GB17625.1
-30 ~ +7 (Refer to "Derating Curve")0℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
±0.03%/ (0 ~ 50 )℃℃
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
824.6Khrs min. MIL-HDBK-217F (25 )℃
63.5*45.7*24mm (L*W*H)
15W Single Output Switching Power Supply EPS-15 series
WITHSTAND VOLTAGE
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltage. Please check the static characteristics for more details.
6. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
7. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, Clamping by zener diode
UL62368-1, TUV EN62368-1 .1 approved
,CCC GB4943EAC TP TC 004,
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A, EAC TP TC 020
<1mA/240VAC
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
0.057Kg; 120pcs/ 7.84Kg/0.97CUFT
±2.0% ±2.0%
±0.5% ±0.5%
±1.0% ±1.0%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±1.0% ±1.0%
±0.5% ±0.5%
±0.5% ±0.5%
±1.0%
±0.5%
±0.5%
EPS-15-36
36V
0.42A
0 ~ 0.46A
15.12W
200mVp-p
32.4 ~ 39.6V
±1.0%
±0.5%
±0.5%
85%
■ Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
1.8"x2.5" compact size
No load power consumption<0.3W
Operating altitude up to 3000 meters
3 years warranty
10.89W 16.56W
16.5W 16.5W 16.5W 16.56W 16.6W 16.51W
16.56W
PEAK LOAD(10sec.) Note.6
File Name:EPS-15-SPEC 2019-07-19
EMC IMMUNITY
EMC EMISSION
Bauar
Sicherheit
egel gema
tgepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
OPERATING ALTITUDE Note.7 3000 meters
[DC input operation possible by connecting AC/L(+), AC/N(-)]
TPTC004UL62368-1 EN62368-1
GB4943.1 IEC62368-1
Mechanical Specification Unit:mm
Block Diagram
CIRCUIT
DETECTION
O.L.P.
EMI FILTER
RECTIFIER
&POWER
SWITCHING FILTER
&
RECTIFIERS +V
-V
I/P
FG
CONTROL
fosc : 65KHz
AC Input Connector (CN1) : JST B3P-VH or equivalent
Pin No.
1
2
3
Assignment
AC/L(+)
No Pin
AC/N(-)
Mating Housing
JST VHR JST SVH-21T-P1.1
or equivalent or equivalent
Terminal
DC Output Connector (CN2) : JST B2P-VH or equivalent
Pin No.
1
2
Assignment
+V
-V
Mating Housing
JST VHR
or equivalent
Terminal
JST SVH-21T-P1.1
or equivalent
-30 0 2010 30 40
20
40
80
60
50
100
6050 70
Static Characteristics
INPUT VOLTAGE (V) 60Hz
85 10095 120115 160140 200180 240220 264
LOAD (%)
90
100
80
70
60
50
40
Output Derating
LOAD (%)
(HORIZONTAL)
15W Single Output Switching Power Supply EPS-15 series
CN1
F3.15A/250VAC
CN2
SVR1
FS1
1
2
HS1
1
2
3
3.175
3.175
39.35
45.7
57.15
63.5
4- 3.3ψ
24
3 max.
: Grounding Required
M1 is safety ground
M1
File Name:EPS-15-SPEC 2019-07-19
