LM193, LM293, LM293A, LM393 LM393A, LM393Y, LM2903, LM2903Q DUAL DIFFERENTIAL COMPARATORS SLCS005E - JUNE 1976 - REVISED NOVEMBER 1999 D D D D D D D D Single Supply or Dual Supplies Wide Range of Supply Voltage . . . 2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage . . . 0.4 mA Typ Per Comparator Low Input Bias Current . . . 25 nA Typ Low Input Offset Current . . . 3 nA Typ (LM193) Low Input Offset Voltage . . . 2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS D, JG, P, OR PW PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN- 2IN+ FK PACKAGE (TOP VIEW) NC 1OUT NC VCC NC D D NC 1IN- NC 1IN+ NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 2OUT NC 2IN- NC NC GND NC 2IN+ NC description 4 These devices consist of two independent voltage NC - No internal connection comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM193 is characterized for operation from -55C to 125C. The LM293 and LM293A are characterized for operation from -25C to 85C. The LM393 and LM393A are characterized for operation from 0C to 70C. The LM2903 and LM2903Q are characterized for operation from -40C to 125C and are manufactured to demanding automotive requirements. logic diagram (each comparator) IN+ IN- OUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1999, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 LM193, LM293, LM293A, LM393 LM393A, LM393Y, LM2903, LM2903Q DUAL DIFFERENTIAL COMPARATORS SLCS005E - JUNE 1976 - REVISED NOVEMBER 1999 AVAILABLE OPTIONS PACKAGED DEVICES VIO(max) AT 25C TA 0C to 70C -25C 25C to 85C 40C to 125C -40C PLASTIC DIP (P) TSSOP (PW) CHIP FORM (Y) -- LM393P LM393PW LM393Y -- LM393AP -- -- -- -- LM293P -- -- LM293AD -- -- LM293AP -- -- LM2903D -- -- LM2903P LM2903PW -- LM2903QD -- -- LM2903QP -- -- -- -- SMALL OUTLINE (D) CHIP CARRIER (FK) CERAMIC DIP (JG) 5 mV LM393D -- 2 mV LM393AD -- 5 mV LM293D 2 mV 7 mV -55C to 125C 5 mV LM193D LM193FK LM193JG LM193P The D package is available taped and reeled. Add the suffix R (e.g., LM393DR). The PW package is only available left-end taped and reeled (e.g., LM393PWR). Chips are tested at 25C (see LM393Y for electrical characteristics). schematic (each comparator) VCC 80-A Current Regulator 10 A 60 A 10 A IN+ 80 A COMPONENT COUNT OUT IN- GND Current values shown are nominal. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 Epi-FET Diodes Resistors Transistors 1 2 2 30 LM193, LM293, LM293A, LM393 LM393A, LM393Y, LM2903, LM2903Q DUAL DIFFERENTIAL COMPARATORS SLCS005E - JUNE 1976 - REVISED NOVEMBER 1999 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 36 V Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Duration of output short-circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Package thermal impedance, JA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149C/W Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, P, or PW package . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the network ground. 2. Differential voltages are at IN+ with respect to IN-. 3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 4. The package thermal impedance is calculated in accordance with JESD 51. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70C POWER RATING TA = 85C POWER RATING TA = 125C POWER RATING FK 900 mW 11.0 mW/C 68C 880 mW 715 mW 275 mW JG 900 mW 8.4 mW/C 43C 672 mW 546 mW 210 mW POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 LM193, LM293, LM293A, LM393 LM393A, LM393Y, LM2903, LM2903Q DUAL DIFFERENTIAL COMPARATORS SLCS005E - JUNE 1976 - REVISED NOVEMBER 1999 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER MIN VCC = 5 V to 30 V, VO = 1.4 1 4 V, V VIC = VIC(min) VIO Input offset voltage IIO Input offset current VO = 1.4 14V IIB Input bias current 14V VO = 1.4 25C TYP MAX 2 5 UNIT TYP MAX 2 5 9 25C 3 9 25 5 100 25C -25 Full range VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VOH = 5 V, VID = 1 V MIN mV Full range Full range Common-mode VICR input voltage range LM293 LM393 LM193 TA TEST CONDITIONS -100 -25 -300 0 to VCC-1.5 0 to VCC-1.5 Full range 0 to VCC-2 0 to VCC-2 25C 50 Large-signal differential voltage amplification IOH High-level g output current VOH = 30 V, VID = 1 V VOL Low-level output voltage IOL = 4 mA mA, VID = -1 1V IOL Low-level output current VOL = 1.5 V, VID = 1 V 25C ICC Supply current RL = VCC = 5 V VCC = 30 V 25C 25C 200 50 0.1 Full range 25C 150 200 0.1 400 150 700 6 Full range 1 2.5 nA V/mV 50 nA 1 A 400 700 6 0.8 nA V 1 Full range -250 -400 25C AVD 50 250 mV mA 0.8 1 2.5 mA Full range (MIN or MAX) for LM193 is -55C to 125C, for LM293 is 25C to 85C, and for LM393 is 0C to 70C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is VCC+ -1.5 V, but either or both inputs can go to 30 V without damage. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 LM193, LM293, LM293A, LM393 LM393A, LM393Y, LM2903, LM2903Q DUAL DIFFERENTIAL COMPARATORS SLCS005E - JUNE 1976 - REVISED NOVEMBER 1999 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER LM293A LM393A TA TEST CONDITIONS MIN VCC = 5 V to 30 V, VO = 1 1.4 4V V, VIC = VIC(min) VIO Input offset voltage IIO Input offset current VO = 1 1.4 4V IIB Input bias current 4V VO = 1 1.4 Large-signal differential voltage amplification IOH High-level g output current VOL TYP MAX 1 3 25C MIN UNIT TYP MAX 2 7 mV Full range 4 25C 5 5 150 25C -25 Full range VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VOH = 5 V, VID = 1 V 15 50 Full range Common-mode VICR input voltage range AVD LM2903 LM2903Q -250 -25 -400 0 to VCC-1.5 0 to VCC-1.5 Full range 0 to VCC-2 0 to VCC-2 25C 50 200 25C VID = 1 V Low-level output voltage IOL = 4 mA mA, VID = -1 1V IOL Low-level output current VOL = 1.5 V, VID = 1 V 25C ICC Supply current RL = VCC = 5 V VCC = 30 V 25C 0.1 Full range 25 100 50 25C 150 0.1 400 150 700 50 nA 1 A 400 6 0.8 Full range nA V/mV 700 6 nA V 1 Full range -250 -500 25C VOH = 30 V, 50 200 mV mA 1 0.8 2.5 1 2.5 mA Full range (MIN or MAX) for LM293A is 25C to 85C, for LM393A is 0C to 70C, and for LM2903 and LM2903Q is -40C to 125C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is VCC+ -1.5 V, but either or both inputs can go to 30 V without damage. electrical characteristics at VCC = 5 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS VIO IIO Input offset voltage IIB Input bias current VICR Common-mode input voltage range VCC = 5 V to 30 V AVD Large-signal differential voltage amplification VCC = 15 V, RL 15 k to VCC VO = 1.4 V to 11.4 V, IOH VOL High-level output current VOH = 5 V, IOL = 4 mA, VID = 1 V VID = -1 V IOL ICC Low-level output current VOL = 1.5 V, RL = , VID = -1 V VCC = 5 V VCC = 5 V to t 30 V, V VO = 1.4 14V Input offset current Low-level output voltage MIN LM393Y TYP VIC = VICR(min), MAX 2 5 mV 5 50 nA -25 -250 nA 0 to VCC-1.5 25 V 200 V/mV 0.1 50 nA 150 400 mV 6 Supply current 0.8 1 All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT mA mA 5 LM193, LM293, LM293A, LM393 LM393A, LM393Y, LM2903, LM2903Q DUAL DIFFERENTIAL COMPARATORS SLCS005E - JUNE 1976 - REVISED NOVEMBER 1999 switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS LM193 LM293, LM293A LM393, LM393A LM2903, LM2903Q MIN Response time RL connected to 5 V through g 5.1 k, CL = 15 pF, See Note 5 TYP 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 MAX CL includes probe and jig capacitance. NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT s IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated 1 of 2 >> Semiconductor Home > Products > Analog & Mixed-Signal > Comparators > LM2903, DUAL, GENERAL PURPOSE DIFFERENTIAL COMPARATOR Device Status: Active > Description > Features > Datasheets > Pricing/Samples/Availability > Application Notes > Development Tools Description These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM193 is characterized for operation from -55C to 125C. The LM293 and LM293A are characterized for operation from -25C to 85C. The LM393 and LM393A are characterized for operation from 0C to 70C. The LM2903 and LM2903Q are characterized for operation from -40C to 125C and are manufactured to demanding automotive requirements. Features l l l l l l l l l l Single Supply or Dual Supplies Wide Range of Supply Voltage ...2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage...0.4 mA Typ Per Comparator Low Input Bias Current...25 nA Typ Low Input Offset Current...3 nA Typ (LM193) Low Input Offset Voltage...2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage...36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS 2 of 2 To view the following documents, Acrobat Reader 3.x is required. To download a document to your hard drive, right-click on the link and choose 'Save'. Datasheets Full datasheet in Acrobat PDF: slcs005e.pdf (100 KB) Full datasheet in Zipped PostScript: slcs005e.psz (106 KB) Pricing/Samples/Availability Orderable Device Package Pins Temp (C) Status Price/unit Pack Qty Availability / Samples USD (100-999) LM2903D D 8 -40 TO 125 ACTIVE 0.34 75 Check stock or order LM2903DR D 8 -40 TO 125 ACTIVE 0.28 2500 Check stock or order LM2903P P 8 -40 TO 125 ACTIVE 0.34 50 Check stock or order LM2903PS PS 8 -40 TO 125 ACTIVE LM2903PWLE PW 8 -40 TO 125 OBSOLETE LM2903PWR PW 8 -40 TO 125 ACTIVE 0.28 2000 Check stock or order LM2903QD D 8 -40 TO 125 ACTIVE 0.30 75 Check stock or order LM2903QDR D 8 -40 TO 125 ACTIVE 0.29 2500 Check stock or order LM2903QP P 8 -40 TO 125 OBSOLETE Check stock or order Application Reports l l l l ANALOG APPLICATIONS JOURNAL, FEBRUARY 2000 (SLYT012A - Updated: 03/23/2000) ANALOG APPLICATIONS JOURNAL, NOVEMBER 1999 (SLYT010A - Updated: 03/23/2000) ELECTROSTATIC DISCHARGE APPLICATION NOTE (SSYA008 - Updated: 05/05/1999) THERMAL CHARACTERISTICS OF LINEAR AND LOGIC PACKAGES USING JEDEC PCB DESIGNS (SZZA017A - Updated: 09/15/1999) Table Data Updated on: 6/2/2000 (c) Copyright 2000 Texas Instruments Incorporated. All rights reserved. Trademarks, Important Notice!, Privacy Policy 1 of 2 >> Semiconductor Home > Products > Analog & Mixed-Signal > Comparators > LM393, DUAL, GENERAL PURPOSE DIFFERENTIAL COMPARATOR Device Status: Active > Description > Features > Datasheets > Pricing/Samples/Availability > Application Notes > Development Tools Parameter Name LM393 VCC / VDD (max) (V) 30 VCC / VDD (min) (V) 4 ICC / IDD per channel (max) (mA) 1.25 VIO max (mV) 5 VICR (max) (V) 3.5 VICR (min) (V) 0 IOL (min) (mA) 6 tRESP Low - to - High (us) 0.3 Description These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM193 is characterized for operation from -55C to 125C. The LM293 and LM293A are characterized for operation from -25C to 85C. The LM393 and LM393A are characterized for operation from 0C to 70C. The LM2903 and LM2903Q are characterized for operation from -40C to 125C and are manufactured to demanding automotive requirements. Features l l l l l Single Supply or Dual Supplies Wide Range of Supply Voltage ...2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage...0.4 mA Typ Per Comparator Low Input Bias Current...25 nA Typ Low Input Offset Current...3 nA Typ (LM193) 2 of 2 l l l l l Low Input Offset Voltage...2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage...36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS To view the following documents, Acrobat Reader 3.x is required. To download a document to your hard drive, right-click on the link and choose 'Save'. Datasheets Full datasheet in Acrobat PDF: slcs005e.pdf (100 KB) Full datasheet in Zipped PostScript: slcs005e.psz (106 KB) Pricing/Samples/Availability Orderable Device Package Pins Temp (C) Status Price/unit Pack Qty Availability / Samples USD (100-999) LM393D D 8 0 TO 70 ACTIVE 0.26 75 Check stock or order LM393DR D 8 0 TO 70 ACTIVE 0.22 2500 Check stock or order LM393P P 8 0 TO 70 ACTIVE 0.26 50 Check stock or order LM393PS PS 8 0 TO 70 ACTIVE LM393PSLE PS 8 0 TO 70 OBSOLETE LM393PSR PS 8 0 TO 70 ACTIVE LM393PWLE PW 8 0 TO 70 OBSOLETE LM393PWR PW 8 0 TO 70 ACTIVE Check stock or order 0.84 2000 Check stock or order 0.22 2000 Check stock or order Application Reports l l l l ANALOG APPLICATIONS JOURNAL, FEBRUARY 2000 (SLYT012A - Updated: 03/23/2000) ANALOG APPLICATIONS JOURNAL, NOVEMBER 1999 (SLYT010A - Updated: 03/23/2000) ELECTROSTATIC DISCHARGE APPLICATION NOTE (SSYA008 - Updated: 05/05/1999) THERMAL CHARACTERISTICS OF LINEAR AND LOGIC PACKAGES USING JEDEC PCB DESIGNS (SZZA017A - Updated: 09/15/1999) Table Data Updated on: 6/1/2000 (c) Copyright 2000 Texas Instruments Incorporated. All rights reserved. Trademarks, Important Notice!, Privacy Policy 1 of 2 >> Semiconductor Home > Products > Analog & Mixed-Signal > Comparators > LM393A, DUAL, GENERAL PURPOSE DIFFERENTIAL COMPARATOR Device Status: Active > Description > Features > Datasheets > Pricing/Samples/Availability > Application Notes > Development Tools Parameter Name LM393A VCC / VDD (max) (V) 30 VCC / VDD (min) (V) 4 ICC / IDD per channel (max) (mA) 0.5 VIO max (mV) 2 VICR (max) (V) 3.5 VICR (min) (V) 0 IOL (min) (mA) 6 tRESP Low - to - High (us) 0.3 Description These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM193 is characterized for operation from -55C to 125C. The LM293 and LM293A are characterized for operation from -25C to 85C. The LM393 and LM393A are characterized for operation from 0C to 70C. The LM2903 and LM2903Q are characterized for operation from -40C to 125C and are manufactured to demanding automotive requirements. Features l l l l l Single Supply or Dual Supplies Wide Range of Supply Voltage ...2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage...0.4 mA Typ Per Comparator Low Input Bias Current...25 nA Typ Low Input Offset Current...3 nA Typ (LM193) 2 of 2 l l l l l Low Input Offset Voltage...2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage...36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS To view the following documents, Acrobat Reader 3.x is required. To download a document to your hard drive, right-click on the link and choose 'Save'. Datasheets Full datasheet in Acrobat PDF: slcs005e.pdf (100 KB) Full datasheet in Zipped PostScript: slcs005e.psz (106 KB) Pricing/Samples/Availability Orderable Device Package Pins Temp (C) Status Price/unit Pack Qty Availability / Samples USD (100-999) LM393AD D 8 0 TO 70 ACTIVE 0.90 75 Check stock or order LM393ADR D 8 0 TO 70 ACTIVE 0.79 2500 Check stock or order LM393AP P 8 0 TO 70 ACTIVE 0.90 50 Check stock or order LM393APS PS 8 0 TO 70 ACTIVE LM393APWLE PW 8 0 TO 70 OBSOLETE LM393APWR PW 8 0 TO 70 ACTIVE Check stock or order 0.75 2000 Check stock or order Application Reports l l l l ANALOG APPLICATIONS JOURNAL, FEBRUARY 2000 (SLYT012A - Updated: 03/23/2000) ANALOG APPLICATIONS JOURNAL, NOVEMBER 1999 (SLYT010A - Updated: 03/23/2000) ELECTROSTATIC DISCHARGE APPLICATION NOTE (SSYA008 - Updated: 05/05/1999) THERMAL CHARACTERISTICS OF LINEAR AND LOGIC PACKAGES USING JEDEC PCB DESIGNS (SZZA017A - Updated: 09/15/1999) Table Data Updated on: 6/2/2000 (c) Copyright 2000 Texas Instruments Incorporated. All rights reserved. Trademarks, Important Notice!, Privacy Policy