SFH6916 Vishay Semiconductors Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package FEATURES * SOP (small outline package) * Isolation test voltage, 3750 VRMS (1.0 s) A 1 16 C C 2 15 E A 3 14 C * Low saturation voltage * High collector emitter voltage, VCEO = 70 V C 4 13 E * Fast switching times A 5 12 C * Temperature stable C 6 11 E * Low coupling capacitance A 7 10 C C 8 9 E * End stackable, 0.050" (1.27 mm) spacing i179076 * Lead (Pb)-free component DESCRIPTION The SFH6916 has a GaAs infrared emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 16 pin 50 mil lead pitch miniflat package. It features a high current transfer ratio, low coupling capacitance, and high isolation voltage. The coupling devices are designed for signal transmission between two electrically separated circuits. * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC AGENCY APPROVALS * UL1577, file no. E52744 system code U * DIN EN 60747-5-5 available with option 1 ORDER INFORMATION PART REMARKS SFH6916 CTR 50 to 300 %, SOP-16 ABSOLUTE MAXIMUM RATINGS (1) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage VR 6.0 V DC forward current IF 50 mA IFSM 2.5 A Pdiss 80 mW V INPUT tp 10 s Surge forward current Total power dissipation OUTPUT Collector emitter voltage VCE 70 Emitter collector voltage VEC 7.0 V IC 50 mA Collector current tp = 1.0 ms IC 100 mA Pdiss 150 mW VISO 3750 VRMS VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Tstg - 55 to + 125 C Total power dissipation per channel COUPLER Isolation test voltage between emitter and detector (1.0 s) Isolation resistance Storage temperature range Document Number: 83687 Rev. 1.8, 16-May-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 755 SFH6916 Vishay Semiconductors Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package ABSOLUTE MAXIMUM RATINGS (1) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Tamb - 55 to +100 C Tj 100 C 260 C 700 mW COUPLER Ambient temperature range Junction temperature max. 10 s dip soldering distance to seating plane 1.5 mm Soldering temperature (2) Total power dissipation Ptot Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS (1) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 5 mA Reverse current VR = 6.0 V MIN. TYP. MAX. UNIT VF 1.15 1.4 V IR 0.01 10 A INPUT (2) Capacitance CO Thermal resistance CO 14 pF Rthja 1000 K/W OUTPUT Collector emitter leakage current Collector emitter capacitance VCE = 20 V ICEO VCE = 5.0 V, f = 1.0 MHz CCE 2.8 pF Rthja 500 K/W IF = 20 mA, IC = 1.0 mA VCEsat 0.1 f = 1.0 MHz CC 1.0 Thermal resistance 100 nA COUPLER Collector emitter saturation voltage Coupling capacitance 0.4 V pF Notes (1) T amb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (2) T amb = 25 C (except where noted). CURRENT TRANSFER RATIO PARAMETER TEST CONDITION SYMBOL MIN. IF = 5.0 mA, VCC = 5.0 V CTR 50 TEST CONDITION SYMBOL MIN. Rise time IC = 2.0 mA, VCC = 10 V, RL = 100 tr 4.0 s Fall time IC = 2.0 mA, VCC = 10 V, RL = 100 tf 3.0 s Turn-on time IC = 2.0 mA, VCC = 10 V, RL = 100 ton 5.0 s Turn-off time IC = 2.0 mA, VCC = 10 V, RL = 100 toff 4.0 s Current transfer ratio TYP. MAX. UNIT 300 % MAX. UNIT SWITCHING CHARACTERISTICS PARAMETER TYP. NON-SATURATED SATURATED Rise time IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k tr 15 s Fall time IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k tf 0.5 s Turn-on time IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k ton 1.0 s Turn-off time IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k toff 30 s www.vishay.com 756 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83687 Rev. 1.8, 16-May-08 SFH6916 Optocoupler, Phototransistor Output, Vishay Semiconductors Quad Channel, SOP-16, Half Pitch Mini-Flat Package R L= 100 IF IF R L= 1.9 k V CC = 10 V IC V CC = 5 V IC 50 50 isfh6916_02 isfh6916_01 Fig. 1 - Switching Operation (Without Saturation) Fig. 2 - Switching Operation (With Saturation) SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. Climatic classification (according to IEC 68 part 1) MAX. UNIT 55/100/21 Comparative tracking index CTI 175 Peak transient overvoltage VIOTM 6000 399 V Peak insulation voltage VIORM 707 V Safety rating - power output PSO 350 mW Safety rating - input current ISI 150 mA Safety rating - temperature TSI 175 C Creepage distance 5 mm Clearance distance 5 mm Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified 80 VF - Forward Voltage (V) T = - 55 C T = - 25 C 1.3 T = 0 C 1.1 T = 100 C T = 75 C 0.9 T = 50 C T = 25 C 0.7 0.01 isfh6916_03 IC - Collector Current (mA) 1.5 70 60 IF = 30 mA 50 IF = 20 mA 40 IF = 15 mA 30 IF = 10 mA 20 IF = 5 mA 10 0 0.1 1 10 100 IF - Forward Current (mA) 2 4 6 8 10 VCE - Collector to Emitter Voltage (V) isfh6916_04 Fig. 3 - Diode Forward Voltage vs. Forward Current Document Number: 83687 Rev. 1.8, 16-May-08 0 Fig. 4 - Collector Current vs. Collector Emitter Voltage For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 757 SFH6916 Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package 1000 24 V 40 V 100 12 V 10 1 - 60 - 40 - 20 0 20 40 60 CTR - Current Transfer Ratio (%) ICEO - Collector to Emitter Dark Current (nA) Vishay Semiconductors 300 VCE = 5.0 V 250 200 150 Typical for CTR = 150 % 100 50 0 80 100 TA - Ambient Temperature (C) Typical for CTR = 250 % 0.1 isfh6916_09 1.0 10.0 50 100.0 IF - Forward Current (mA) isfh6916_05 Fig. 5 - Collector to Emitter Dark Current vs. Ambient Temperature Fig. 8 - Current Transfer Ratio vs. Forward Current 100 10 1 IF = 25 mA IF = 10 mA 0.100 IF = 5.0 mA IF = 2.0 mA 0.010 IF = 1.0 mA 0.001 0.0 Switching Time (s) Collector Current (mA) 100 0.4 0.6 0.8 toff td ts 1 VCC = 5.0 V IC = 2.0 mA 0 1.0 isfh6916_06 1000 1500 2000 isfh6916_10 Fig. 9 - Switching Time vs. Load Resistance 1.4 1000 Switching Time (s) 1.2 1.0 0.8 0.6 0.4 IF = 5.0 mA VCC = 5.0 V TA = 25 C 100 CTR = 150 % tf ts 10 tr td 1 Normalized to 1.0 at TA = 25 C IF = 1.0 mA, VCE = 5.0 V 0.0 - 60 - 40 - 20 0 0 20 40 60 80 100 100 1000 10 000 100 000 RL - Load Resistance () TA - Ambient Temperature (C) isfh6916_11 isfh6916_07 Fig. 7 - Normalized Output Current vs. Ambient Temperature www.vishay.com 758 500 RL - Load Resistance () Fig. 6 - Collector Current vs. Collector Emitter Saturation Voltage CTR - Normalized Ouput Current 10 0.1 0.2 VCE(sat) - Collector Emitter Saturation Voltage (V) 0.2 ton Fig. 10 - Switching Time vs. Load Resistance For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83687 Rev. 1.8, 16-May-08 SFH6916 Optocoupler, Phototransistor Output, Vishay Semiconductors Quad Channel, SOP-16, Half Pitch Mini-Flat Package Input t off t on t pdoff t pdon td Output tf tr ts 10 % 10 % 50 % 50 % 90 % 90 % isfh6916_12 Fig. 11 - Switching Time Measurement PACKAGE DIMENSIONS in inches (millimeters) R 0.010 (0.25) 0.19 (4.83) 0.17 (4.32) 0.050 (0.127) 0.014 (0.36) 0.036 (0.91) 0.200 (5.08) 0.290 (7.37) 0.43 4 (11.02) 0.414 (10.52) IS O method A i178043 0.05 5 (1.40) 0.04 5 (1.14) Document Number: 83687 Rev. 1.8, 16-May-08 40 10 0.008 ( 0.20) 0.004 ( 0.10) 0.080 (2.03) 0.075 (1.91) 0.018 (0.46) 0.014 (0.36) 0.22 0 (5.59) 0.20 0 (5.08) 0.017 ( 0.43) 0.013 ( 0.33) 0.034 (0.87) 0.024 (0.61) 0.045 (1.14) 0.000 (0.00) 0.005 (0.13) 0.200 (5.08) 0.220 (5.59) 0.28 0 (7.11) 0.260 (6.60) For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 759 SFH6916 Vishay Semiconductors Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 760 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83687 Rev. 1.8, 16-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1